Integrating multiple UCCX clusters with same Call Manager Cluster

I want to know if I can integrate multiple UCCX clusters with 1 Call Manager cluster? If yes, can someone please point me to the documentation.
I appreciate all the help..
Thanks!!!

Hi
Yes, you can. I'm not aware of specific documentation for this, but a couple of notes:
- Make sure you use unique resource accounts (e.g. JT user in particular as that is automatically managed by UCCX and one cluster WILL break the other)
- I would also use unique AXL accounts and probably RM accounts. RM you could share between clusters to just have one RM account to associate any agent phone to, but it's safer to have single-purpose service accounts.
- You can't assign a user to a particular cluster - so you enable IPCC Extension on one user, they appear in 'resources' on both UCCX servers.
Regards
Aaron HarrisonPrincipal Engineer at Logicalis UK
Please rate helpful posts...

Similar Messages

  • Integration with Cisco Call Manager?

    We have Cisco VOIP phones and we would like to continue managing calls with Cisco Call Manager.  We currently have voicemail on Cisco Unity.  We currently have Exchange 2010, but plan to start using Exchange 2013 soon.
    However, we would like to migrate voicemail service from Cisco Unity to Exchange Unified Messaging and also want to take advantage of most of the voicemail-related features of UM such as voice to text sent to email, voice mail waiting indicator light on
    the phones and sending voice mail audio attachments to email. 
    Is Exchange 2013 Unified Messaging compatible Cisco phones that are managed by Cisco Call Manager?
    We have 500 users and 2 Exchange 2010 servers (1 CAS and 1 Mailbox Server).  We now have a few Exchange 2013 licenses available in addition to our existing 2010 licenses that are already used on our existing 2 servers.  Can we keep the 2 existing
    Exchange 2010 servers as they are and create a new Unified Messaging server on  Exchange 2013 in the same environment or do we need to upgrade all the 2010 servers to 2013 if we use Unified Messaging on 2013?

    Hi Sachin,
    We do run a hybrid Callmanager to Nortel Meridian setup (works well).
    Here are some great docs;
    Cisco Unified CallManager
    Case Study: Nortel 61C PBX to Cisco IP Telephony Migration
    From this good doc;
    http://www.cisco.com/en/US/products/sw/voicesw/ps556/products_white_paper09186a00801115e0.shtml
    Nortel Meridian PBX and Cisco CallManager Integration
    http://www.cisco.com/en/US/products/sw/voicesw/ps556/products_configuration_example09186a008011888c.shtml
    Cisco Unified CallManager System Guide, Release 4.2(1)
    Cisco DPA Integration
    http://www.cisco.com/en/US/products/sw/voicesw/ps556/products_administration_guide_chapter09186a008055cd53.html
    Hope this helps! Let me know if you need additional info.
    Rob

  • HT4528 i am having problems since downloading ios8.  app freezing, display orientation locking up, calls coming into multiple phones associated with same apple id.  Anyone else having these issues?  i did not download the update

    i am having problems since downloading ios8.  app freezing, display orientation locking up, calls coming into multiple phones associated with same apple id.  Anyone else having these issues?  i did not download the update

    No.  But thank for asking.

  • Multi-Site WAN With Centralized Call Manager

    The customer has HQ with 15 Branches. Head quarter has about 4300 Phones, and Branches has:
    Branch 1 = 420
    Branch 2 = 256
    Branch 3 = 385
    Brnach 4 = 298
    Branch 5 = 262
    Branch 6 = 171
    Branch 7 = 200
    Branch 8 = 97
    Branch 9 = 198
    Branch 10 = 254
    Branch 11 = 269
    Branch 12 = 224
    Branch 13 = 90
    I would still like to propose Centralized Call Manager Cluster with SRST, but little confused since the number of phones per branch is very high.
    What would be best deployment model for this type of scenerio along with VoiceMail and CER.

    Of course you can use CME/CUE, but the problem is that you need 3845 for SRST with CME/CUE, which cost a lot of money CISCO3845-CCME/K9 is $16495 plus CUE ($3000, not include voice mail subscriber box).
    So I will agree what people suggest here.
    I have centralized design (Publisher, subscriber) at Main Location, and another subscriber at remote site coz 500 users. I chose put subscriber there rather than use 3845 with SRST.
    They share voice box at Main site (Unified).
    The rest of remote site use SRST for backup.
    Large remote site with T1 PRI with SRST if WAN down.
    Small remote site with vic2-2fxo/4fxo with SRST if WAN down.
    You can read the SRND here:
    http://www.cisco.com/en/US/products/sw/voicesw/ps556/products_implementation_design_guide_book09186a00806e8a79.html
    Also, you can design multiple cluster depends the location of main and branches. For example, half office located at West Coast, another half at East Coast. If I were you, I will create two clusters.
    Again, it depends a lot of things, for example bandwidth, round-trip delay etc...
    Hopefully, thats can help you.
    Ken

  • Is it possible to integrate Nokia E62 with Cisco Call Manager 4.x?

    The Nokia E-61 can be integrated with Cisco Call manager 4.x using a Nokia Call Connect 1.0 client.
    1.Is it possible to do the same with Nokia E62.If it can be done,what would be the requirements?
    2.Is Nokia E-62 PDA a Cisco Compatible Extension device?

    Thanks a lot for the prompt reply.You are right in saying that nokia and cisco are increasing the number of models supported.Infact the E65 has already joined the club.But my point of interest is the nokia E62 in particular.This Nokia E62 device
    1) does not support WLAN interface(while E61,E65 does).
    2) It is not Cisco Commpatible extension device.(I did not find E62 in the list of Cisco Compatible extensions.chk out the attachments for more info).
    3)It is not compatible with Nokia Intellisync CAll Connect 1.0(while E61 and E65 are compatible.chk out the attachment for more info).
    I found this rather weird and i wondered if Nokia E62 can be integrated with Cisco Call manager ,especially a device which is not Cisco compatible.The only possibility i can see from your answer is that the Nokia E62 might not be SIP enabled(correct me if i am wrong here!)
    My objective is to send a message from a CUAE script to a nokia E62 device.Please excuse me if my posting is not in the right place.i would be highly grateful to you if you could give me pointers to an appropiate location where i can get my queries answered.

  • Hi Team, I wuold like to know if you have any app to make Firefox OS working with cisco Call Manager 10.5. Something like Cisco Jabber for Android or iOS.

    I'm interesting on buying a Firefox Smart Phone, but
    I would like to know if are any app to install on Firefox OS smart phone in order to work with cisco call manager 10.5.
    Something like Cisco Jabber for Android o iOS.
    Thanks,

    Hi Itech,
    If Cisco Jabber has a webapp, or mobile version of their website available, you should technically be able to access it through Firefox OS.
    You may also search Firefox Marketplace for an alternative solution:
    * [https://marketplace.firefox.com/]
    - Ralph

  • Multiple controlling area with same chart account

    Hi Experts,
    can we consolidate multiple controlling area with same chart account in SAP BI?
    for example, if in R3 I have 4 Controlling Areas with the same chart of accounts, I can get an standard BW reports summarizing  them.

    Hi
    Chart of accounts i.e. 0CHRT_ACCTS is an attribute of Controlling area. This means each Controlling area will have it's own chart of accounts. This chart of accounts could be similar in terms of content values. So it is possible to consolidate and produce a report which provides a summary of the chart of accounts.
    Cheers
    Umesh

  • Multiple Clusters with same computers

    Is there a way to set up multiple clusters with the same computers.
    For example
    Cluster A has computers 1, 2
    Cluster B has computers 1, 2, 3, 4, 5
    The reason behind this is that computers 1 and 2 are always available, but 3, 4, 5 are used during the day. I'd like to have a day cluster and a night cluster that I can just select as needed.

    Hi Jake, I was playing with this type of thing when FCS1 first came out using some old powerbooks.
    Yes you can kind of do this using UNMANAGED SERVICES but I will stand corrected for COMPRESSOR3.app.
    In FCS2, compressor 3, simply if you use *MANAGED SERVICES* of the service nodes available through a defined a specific cluster (you would have used appleqmaster utility.app) than I believe those service nodes are dedicated to that cluster.
    Sure you can make 'INSTANCES" of compressor for example and the 'renderer" instances dedicated to particular cluster using this as an example... let say...
    HOST1 = MACPRO8CORE with 4 instances of compressor (as C1,C2,C3,C4 via vi 4 virtual clusters) and 8 instances of renderer (R1,R2,..R7 & R8).
    HOST2 = MACBOOKPRO with 1 instance of compressor (as C1 & C2 with 2 virtual clusters) and 2 instances of renderer (R1,R2).
    HOST3 = PowerbookG4 with 1 instance of compressor (as C1) and 1 instances of renderer (R1).
    only as an example
    ClusterA: Host1[C1,C2C3, R1,R2,R4,R5), Host2[C2]
    ClusterB: Host1[C4, R6,R3,R6,R7), Host2[C2,R1R2], HOST3{C1,R1]
    In fact I just tried it...
    However as I thought for managed services be assured that you cannot SHARE a service node with two or more clusters. I will stand corrected.
    Messy but seems to work but useless with the powerbook you'd agree
    However depending on your workflow and commecrial needs (say for busness prioriries for a specific client) for best results use *UNMANAGED SERVICES* ....
    Simply hook everything up over GBE, with all the usual tweaks such as "NEVER COPY SOURCE" and MOUNTING all source targets and compressor work files over HFS on the GBE subnet (and many other tweaks) and treat the set up as a huge bucket.
    Use priority on the batch submission. It's not too smart but at least you have some manipulation over the queues.
    The resource manager in QMASTER is not so smart. So despite a service node going idle it does not seem to redirect work from wone node to another for load balancing..
    I have only tried this with SEGMENTED TRANSCODING.
    Rendering (Shake) works great and seem simpler. My time is with multipass segented transcoding where I want H.264 from DVCPROHD and dont want to wait all day for it, especially where I have tweaked the timing in compressor a bit.
    Try it out.
    BTW as many contest on this forum, QMASTER/COMPRESSOR can be a bugger to fix if it plays up. and it has for me as well.
    post your results.
    HTH.
    w

  • Passing multiple URL parameters with same name

    Hi,
    I have a question which is not entirely related to Java. But although its related HTTP calls, so I thought I might get some ideas here.
    Background:
    I am making HTTP URL call from SAP ABAP code. Its pretty much similar to Java (creating URL connection, setting HTTP headers, connecting, receiving response and everything)
    For example,
    http://service_server:8080/a7/extension.services.SearchRequirements.a7x?RequestStatus=CR&RequestStatus=RR
    Now, this service_server runs a query to database where it uses both these values of "RequestStatus" to form 'OR' condition for a field.
    Issue:
    When I run this URL from browser, it shows XML response containing results for both values. In short, this is the ideal response.
    (I am using getParameterValues(string) at service_server to read multiple values for same parameter)
    But when I see response in SAP system, I see that it is returning data for only one value of 'RequestStatus'.
    I checked the logs of service_server, and I see that it has received only one parameter, not two.
    Question:
    It seems like SAP systems web server is truncating both parameters with same name and passing just one of them to outside server(??)
    Is there any configuration at Web Server side or any HTTP headers to be set so as to avoid this?
    Can anybody suggest something on this?

    I managed to resolve this issue by using HTTP 'Post' method to send the data.
    CALL METHOD CL_HTTP_CLIENT=>CREATE_BY_URL
        EXPORTING
          URL                = L_URL
        IMPORTING
          CLIENT             = L_HTTP_CLIENT
        EXCEPTIONS
          ARGUMENT_NOT_FOUND = 1
          PLUGIN_NOT_ACTIVE  = 2
          INTERNAL_ERROR     = 3
          OTHERS             = 4 .
    "STEP-2 :  AUTHENTICATE HTTP CLIENT
    CALL METHOD L_HTTP_CLIENT->AUTHENTICATE
      EXPORTING
        USERNAME             = 'name'
        PASSWORD             = 'password'.
    "STEP-3 :  SET HTTP HEADERS
    CALL METHOD L_HTTP_CLIENT->REQUEST->SET_HEADER_FIELD
          EXPORTING NAME  = 'Accept'
                    VALUE = 'text/xml'.
    CALL METHOD L_HTTP_CLIENT->REQUEST->SET_HEADER_FIELD
        EXPORTING NAME  = '~request_method'
                   VALUE = 'POST' .
    CALL METHOD L_HTTP_CLIENT->REQUEST->SET_CONTENT_TYPE
        EXPORTING CONTENT_TYPE  = 'application/x-www-form-urlencoded' .
    "SETTING REQUEST DATA FOR 'POST' METHOD
    IF L_PARAMS_STRING IS NOT INITIAL.
       CALL FUNCTION 'SCMS_STRING_TO_XSTRING'
         EXPORTING
             TEXT   = L_PARAMS_STRING
         IMPORTING
               BUFFER = L_PARAMS_XSTRING
         EXCEPTIONS
            FAILED = 1
            OTHERS = 2.
    CALL METHOD L_HTTP_CLIENT->REQUEST->SET_DATA
        EXPORTING DATA  = L_PARAMS_XSTRING  .
    ENDIF.
    "STEP-4 :  SEND HTTP REQUEST
      CALL METHOD L_HTTP_CLIENT->SEND
        EXCEPTIONS
          HTTP_COMMUNICATION_FAILURE = 1
          HTTP_INVALID_STATE         = 2.
    "STEP-5 :  GET HTTP RESPONSE
        CALL METHOD L_HTTP_CLIENT->RECEIVE
          EXCEPTIONS
            HTTP_COMMUNICATION_FAILURE = 1
            HTTP_INVALID_STATE         = 2
            HTTP_PROCESSING_FAILED     = 3.
    "STEP-6 :  READ RESPONSE DATA
    CALL METHOD L_HTTP_CLIENT->RESPONSE->GET_CDATA
            RECEIVING DATA = L_RESULT .
    "STEP-7 : CLOSE CONNECTION
    CALL METHOD L_HTTP_CLIENT->CLOSE
      EXCEPTIONS
        HTTP_INVALID_STATE = 1
        OTHERS             = 2   .
    {code}                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                   

  • IOS 8 creating multiple group messages with same recipients

    After updating to iOS 8.0, my iPhone 5s has started creating multiple group messages with the same recipients. For example, my phone has created three group threads with the exact same people in it. Different friends' messages go to different threads. It is terrible confusing and annoying. It has done this with several of my group messages. Deleting the duplicate threads have not worked. They keep recreating themselves when certain people text the group.
    Any suggestions? This has been a problem for many of my friends as well.

    Hi hkapn,
    Do you and your wife use the same Apple ID and are connected to the same wifi network?  Your phone ringing to multiple devices is called Continuity and is a feature of iOS8. https://www.apple.com/ios/whats-new/continuity/
    Essentially, it allows you to use your iPhone cellular connection on all of your iOS8 devices: iPhone, iPad, Mac computers with Yosemite.  On some devices the call will look like it is coming through FaceTime, but likely on your wife's iPhone it just looked like a regular call.
    Since your iPhone was "hosting" the phone call through it's own cellular connection, you were able to pick it up after your wife answered, which caused your wife's phone to disconnect.  This is called Handoff and is also a feature of iOS8.
    You can turn off Continuity if you'd like, but you could also look into getting your wife her own Apple ID.  I'm guessing you were sharing one so that you didn't have to make purchases twice.  Also in iOS8, there is a feature called Family Sharing which allows you to link multiple Apple IDs and share purchases (among other things).
    In regards to the group text message issue, as far as I can tell, splitting group messages is NOT a feature.   I agree that there should be an answer to this already!

  • Integrating Oracle EBS R12 with Oracle Access Manager 11g

    Hi Everyone ,
    Oracle Access Manager version 11.1.1.5
    Oracle Identity Management 11.1.1.6.0
    Oracle Access Manager WebGate 11.1.1.5
    Oracle E-Business Suite AccessGate patch p12796012
    Apps Version : 12.1.1
    DB Version 11.2.0.3
    PLatform : OEL 5.8
    We are trying to Integrating Oracle E-Business Suite Release 12 with Oracle Access Manager 11g using Oracle E-Business Suite AccessGate.We followed metalink id's
    1309013.1 and 1543803.1 and some other documents.We have performed every step as documented , and everything seems to work fine untill user tries to log out from Oracle Applications i.e User
    is able to login to Oracle Applications through access gate and everything is working fine. But as user click logout button an error messsage is diplayed like "*500*
    *Internal Server Error Servlet error: An exception occured* " (The url at the time of this message is http://hostname:port/OA_HTML/AppsLogout ).
    Apps Tier (oacore) Application log:-
    +13/05/15 19:04:20.229 html: Servlet error+
    java.lang.NoSuchMethodError: oracle.apps.fnd.sso.SSOManager.getAuthAgentLogoutUrl(Ljava/lang/String;Ljava/lang/String;)Ljava/lang/String;
    at oracle.apps.fnd.sso.AppsLogoutRedirect.doGet(AppsLogoutRedirect.java:193)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:743)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
    +at com.evermind[Oracle Containers for J2EE 10g (10.1.3.4.0) ].server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java:64)+
    at oracle.apps.jtf.base.session.ReleaseResFilter.doFilter(ReleaseResFilter.java:26)
    +at com.evermind[Oracle Containers for J2EE 10g (10.1.3.4.0) ].server.http.EvermindFilterChain.doFilter(EvermindFilterChain.java:15)+
    at oracle.apps.fnd.security.AppsServletFilter.doFilter(AppsServletFilter.java:318)
    +at com.evermind[Oracle Containers for J2EE 10g (10.1.3.4.0) ].server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:621)+
    +at com.evermind[Oracle Containers for J2EE 10g (10.1.3.4.0) ].server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:370)+
    +at com.evermind[Oracle Containers for J2EE 10g (10.1.3.4.0) ].server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:871)+
    +at com.evermind[Oracle Containers for J2EE 10g (10.1.3.4.0) ].server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:453)+
    Apps Tier Apache Error log :-
    +[Wed May 15 18:50:52 2013] [error] [client 192.168.0.2] [ecid: 1368624052:192.168.0.61:10798:0:44,0] File does not exist: /u01/eBiZR12/apps/apps_st/comn/java/classes//+
    WE have set all required profile in Oracle Application as directed in documents , and users are able to login just fine , but they are not able to logout.
    IS there something that we are missing , any help is highly appreciated.
    Regards
    Edited by: TheKop88 on May 16, 2013 11:39 AM

    Hi there ,
    Thanks for reply ,
    We had already gone through that document earlier. We noticed that when Apllication Profile "*Apllications SSO Type* " is set to SSWA then OA_HTML/AppsLogout is
    working fine , but when we set "*Applications SSO Type*" to SSWA w/SSO then OA_HTML/AppsLogout is not working(not redirecting) .Error thrown on web browser is "+500 Internal Server Error Servlet error: An exception occurred. The current application deployment descriptors do not allow for including it in this response+" . we believe that we might have missed some Profile settings that is causing this error.
    Regards
    Edited by: TheKop88 on May 16, 2013 12:03 PM
    Edited by: TheKop88 on May 16, 2013 12:07 PM

  • Multiple CVCs generated with same DP BOM

    Guys,
    In my example, I am using DP with BOM scenario.
    The "issue" I am facing is following: I have Characteristics Product and Location as part of POS; I created two CVCs with sames product different locations, saying: (COMPUTER, NEWYORK); (COMPUTER, LONDON); I created a DP PPM for COMPUTER with production location NEWYORK; I use standard transaction to add BOM information to POS in order to generate the complete CVCs.
    What I wanted is new set of CVCs with components generated only for NEWYORK, however I got two sets CVCs generated for both NEWYORK and LONDON.
    Do anyone has experience with this kind of "issue"? Appreciate any sharing!
    Regards,
    Tony

    Guys,
    In my example, I am using DP with BOM scenario.
    The "issue" I am facing is following: I have Characteristics Product and Location as part of POS; I created two CVCs with sames product different locations, saying: (COMPUTER, NEWYORK); (COMPUTER, LONDON); I created a DP PPM for COMPUTER with production location NEWYORK; I use standard transaction to add BOM information to POS in order to generate the complete CVCs.
    What I wanted is new set of CVCs with components generated only for NEWYORK, however I got two sets CVCs generated for both NEWYORK and LONDON.
    Do anyone has experience with this kind of "issue"? Appreciate any sharing!
    Regards,
    Tony

  • Any one using/deployed Telematrix phones with Cisco Call Manager

    Any one using/deployed Telematrix phones with Cisco Call Manager

    Yes, it does:
    Cisco Unified IP Phone Series 7900
    http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/compat/ccmcompmatr.html#wp51474
    Config on CUCM itself is no different from any other phones neither other requirements like DLUs.
    Of course you should already have APs for connectivity.
    HTH
    java
    if this helps, please rate

  • Remoting with powershell to manage cluster

    Hello. I have installed admin tools on windows 8.1. I can use all the available tools/snap-ins except for the failover cluster manager. That's because the cluster is based on winserver 2008 r2. That's okay. Now to the problem. I want to use the failover
    cluster module in powershell instead, but when I run the import-module failoverclusters, the module cannot be located on any module directory. I checked the specified path; c/windows/system32/powershell/v.10/modules and the failovercluster folder is there.
    I am using powershell 4.0 on windows 8.1. What can I do import the module and use the it's commandlets? Help.

    Hi,
    The Server Manager on Windows 8.1 or 2012r2 just has the Limited support to manage 2008r2. The detail content please refer the related KB:
    Manage Multiple, Remote Servers with Server Manager
    http://technet.microsoft.com/en-us/library/hh831456.aspx#BKMK_softconfig
    Hope this helps.
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • Set up multiple clusters with same nodes

    Hello,
    I'm trying to set up 2 clusters using qadministrator. One with nodes A,B,C,D and a second with nodes A,B,C. When I drag my nodes into my first cluster, they are gone from qmaster service browser in qadministrator. Does this mean that nodes can only be used for one cluster?
    thanks
    dan

    Hello,
    I'm trying to set up 2 clusters using qadministrator. One with nodes A,B,C,D and a second with nodes A,B,C. When I drag my nodes into my first cluster, they are gone from qmaster service browser in qadministrator. Does this mean that nodes can only be used for one cluster?
    thanks
    dan

Maybe you are looking for