Integrating new ext HD with Time Capsule and MacBook pro
I just purchased a 4 TB Seagate Backup Plus that I’m looking to integrate with my mid-2009 MacBook Pro and 2 TB Time Capsule that I’m currently using to store my iTunes library (I know, bad move, one of the reasons for the new Seagate) and run my Time Machine backups. If I can use the TC only as an external HD and backup with Time Machine to the new Seagate I’m willing to do that. If I can’t, I understand the limitations of the larger capacity Seagate with the smaller TC. Probably won’t top 2 TB for a while so I’ll cross that > 2 TB of info bridge when I get to it and need a larger drive for Time Machine backups
The current plan is to move the iTunes library to the Seagate along with the new, and ever growing Aperture library (currently on the MB) while backing up both the MacBook and Seagate to the Time Capsule; unless I can switch them and use the TC as an ext HD and the Seagate for backups. How do I go about doing this? How do I answer the “Do you want to use this new drive with Time Machine” prompt being that I’m currently not planning on backing up to the Seagate but want to backup the Seagate up to the TC? Do I need to reformat the Seagate disc? Still figuring out how I want to configure the Aperture (which I’m still learning) library but I’d like to keep the mobility advantage of the laptop and use the internal HD for a working library and move the post-processed images to the Seagate for archival. I’ll be checking on the Aperture forum.
Thanks for any help to this incredibly newbie type question. There’s usually a similar, but not exact, answer to my questions on forums or the threads are a few years old, so figured it would be faster and more accurate to just ask.
I just purchased a 4 TB Seagate Backup Plus... If I can use the TC only as an external HD and backup with Time Machine to the new Seagate I’m willing to do that.
The Seagate Backup Plus portable drives are Time Machine compatible so you shouldn't have any issues backing up your MacBook Pro to this drive. You also shouldn't have any issues using the TC as an "external HD" if you actually meant "network" drive. That is, it will still be available on the network as a storage device.
The current plan is to move the iTunes library to the Seagate along with the new, and ever growing Aperture library (currently on the MB)...
That shouldn't be a problem.
...while backing up both the MacBook and Seagate to the Time Capsule
Backing up the MacBook Pro using Time Machine will not be an issue, but you will not be able to use Time Machine to back up the Time Capsule to the Seagate. It may still be possible to use some other back up solution for this.
How do I answer the “Do you want to use this new drive with Time Machine” prompt being that I’m currently not planning on backing up to the Seagate but want to backup the Seagate up to the TC?
At this point, just answer "No." You can always choose the Seagate as a Time Machine destination later via the Time Machine interface. Again, you CANNOT back up the Time Capsule to the Seagate with Time Machine.
Do I need to reformat the Seagate disc?
If you got the Mac version of this Seagate drive it is already properly formatted. However, if you got the PC version, you will need to reformat it for HFS+ in order for the TC to share it out properly. That means you will need to temporarily connect it to your Mac, via USB, and then, use the Disk Utility to format it.
Similar Messages
-
Help! Time Capsule and MacBook Pro not talking
I'm really hoping some bright spark out there has some suggestions.
I recently took my MacBook Pro and Time Capsule to an Apple store due to 2 problems:
1. The computer was slowing down and occasionally crashing.
2. Whenever Time Machine tried to back up to my previously happy Time Capsule, it said it "could not mount the back up disc image" and failed.
They suggested that changing the hard drive would fix both problems as the time capsule issues were probably related to the struggling hard drive. They then planned to get back the previously saved information from the Time Capsule to give me back all the stuff from the old hard drive. After a great deal of trouble getting the hard drive actually changed over (after doing a lot of backing up to USB sticks), they called to say they had some issues getting the info back out of the Capsule because it hadn't saved properly last time. They didn't seem interested in pursuing the idea of getting the most recently saved snapshot that had worked (a month or so ago now) so just gave me back computer and a Time Capsule that they said was working but apparently with my info imprisoned inside.
So, I took it home and I've now got a computer (with none of my user info) and a Time Capsule set up for direct connection rather than wireless. When I went to set up my Time Capsule as something connecting wirelessly to the computer, it updated the settings but the Time Capsule failed to reboot and ever since has been giving me the flashing amber light. Every time Airport Utility scans for wireless devices, it can't find the Time Capsule.
I've already tried:
- Re-installing my original Leopard from scratch.
- Updating to most recent Leopard and Airport utility.
I'm nervous about resetting the factory settings on the Time Capsule because I don't want to lose the data in there, I'm keen to try and get it back somehow (I've backed up most vital things but there are always going to be some things I'll lose otherwise.
Sorry it's a long entry but I'm looking for all the help I can get!
Thanks to anyone who tries.The new TC will need to be setup again in the MBP..
Just go to TM and select the target disk for backup again.
If you have issues plug in by ethernet and make sure the wireless setup is configured correctly.
Read the stuff in pondini about resetting TM.. that can help.
A4 http://pondini.org/TM/Troubleshooting.html -
Backing up Mac HD with Time Capsule AND an external hard drive
I am sure that this question has been asked one way or another but I can't seem to find the exact answer.
I would like to back up my Mac HD with the Time Capsule AND another hard drive essentially to create two backups. Should one fail, I still have another copy as a precaution. The Time Capsule will be my primary back up because my external hard drive is usually switched off and will only be turned on from time to time to perform "less frequent" backups.
With Time Capsule AND the external hard drive on, will Time Machine just update the backup on the external hard drive without becoming confused with the other copy on Time Capsule? In other words, can Time Machine distinguish between two different Time Machine Backup files and bring them up to date accordingly?
I understand there is an archive function on the Time Capsule, which would also serve the purpose. However, I am wondering if there is another way.
Thanks.Rheopaipo wrote:
I am sure that this question has been asked one way or another but I can't seem to find the exact answer.
I would like to back up my Mac HD with the Time Capsule AND another hard drive essentially to create two backups. Should one fail, I still have another copy as a precaution. The Time Capsule will be my primary back up because my external hard drive is usually switched off and will only be turned on from time to time to perform "less frequent" backups.
With Time Capsule AND the external hard drive on, will Time Machine just update the backup on the external hard drive without becoming confused with the other copy on Time Capsule? In other words, can Time Machine distinguish between two different Time Machine Backup files and bring them up to date accordingly?
I understand there is an archive function on the Time Capsule, which would also serve the purpose. However, I am wondering if there is another way.
I don't think it's possible to configure Time Machine to back up to two locations without modifying its settings frequently.
You might consider using that external drive to hold a bootable backup. You can create such a thing with either of the utilities SuperDuper! or Carbon Copy Cloner. If you pay the registration fee for SuperDuper! (~US$28), there's a mode where it will back up only what has changed, which makes the backup operation run quicker. (Carbon Copy Cloner may offer a similar feature.) -
my start up disc is full i have a macbook air, i back everuthing up with time capsule and have movies all my music libraries and photos onto that too so as i have free space, but my max still says my startup disc is full with "other"
First, empty the Trash if you haven't already done so. Then reboot. That will temporarily free up some space.
According to Apple documentation, you need at least 9 GB of available space on the startup volume (as shown in the Finder Info window) for normal operation. You also need enough space left over to allow for growth of your data. There is little or no performance advantage to having more available space than the minimum Apple recommends. Available storage space that you'll never use is wasted space.
If you're using Time Machine to back up a portable Mac, some of the available space will be used to make local snapshots, which are backup copies of files you've recently deleted. The space occupied by local snapshots is reported as available by the Finder, and should be considered as such. In the Storage display of System Information, local snapshots are shown as "Backups." The snapshots are automatically deleted when they expire or when free space falls below a certain level. You ordinarily don't need to, and should not, delete local snapshots yourself.
To locate large files, you can use Spotlight as described here. That method may not find large folders that contain a lot of small files.
You can also use a tool such as OmniDiskSweeper (ODS) to explore your volume and find out what's taking up the space. You can delete files with it, but don't do that unless you're sure that you know what you're deleting and that all data is safely backed up. That means you have multiple backups, not just one.
Proceed further only if the problem hasn't been solved.
ODS can't see the whole filesystem when you run it just by double-clicking; it only sees files that you have permission to read. To see everything, you have to run it as root.
Back up all data now.
Install ODS in the Applications folder as usual.
Triple-click the line of text below to select it, then copy the selected text to the Clipboard (command-C):sudo /Applications/OmniDiskSweeper.app/Contents/MacOS/OmniDiskSweeper
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window (command-V). You'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning not to screw up. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
I don't recommend that you make a habit of doing this. Don't delete anything while running ODS as root. If something needs to be deleted, make sure you know what it is and how it got there, and then delete it by other, safer, means.
When you're done with ODS, quit it and also quit Terminal. -
Purchased a new Macbook Pro 13". I used migration assistant to transfer. I can't backup to time capsule. I am getting on error "The backup disk image “/Volumes/Herb's Time Capsul/Herb MacBook Pro.sparsebundle” could not be created (error 17). Help!
Launch the Keychain Access application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Keychain Access in the page that opens.
Select the System keychain in the list of keychains in the sidebar of the window. If you don't see the list, click the down-arrow icon below the sidebar.
Then select Passwords in the Category list at lower left. Click the Kind heading in the list of keychain items to arrange it by Kind.
Locate the AirPort Disk Password with the name of your Time Capsule. Double-click the item and check the box marked Show Password in the inspector window that opens. You'll be prompted for the administrator login password. Make a note of the AirPort password, then close the inspector window and delete the item.
Also delete any other AirPort DIsk Password items for that same Time Capsule, which may have had a different name in the past.
Quit Keychain Access and try again to back up. -
What if my error message is the following: The backup disk image “/Volumes/********'s Time Capsul/****’s MacBook Pro.sparsebundle” is already in use. (I have redacted the name of the computer with asterixes)
This is a complex procedure.
Pull the power cord from the back of the Time Capsule
Wait a minute or two
Plug the power cord back in to the back of the Time Capsule
This will fix the issue 98% of the time. If you are in the unlucky 2% category, more help is here from Pondini, the Time Machine guru:
The Backup disk image ... sparsebundle ... is already in use. -
When I switch my time capsule to 5.0ghz mode the range of my wireless network drops significantly. Near the Time Capsule my Macbook Pro works fine, in my bedroom I have almost no signal. In mixed mode it works fine both placed. Any ideas on how to get 5.0 working? I thought 5.0Ghz was supposed to have a wider range. Do I need to change a setting on the Macbook Pro?
Thanks, WI'm not sure if you understand that 5 GHz has some upsides, but also some very significant downsides.
The upside is that the 5 GHz signal will allow faster speeds.
The downside is that you must always give up something in order to gain something else.Unfortunately, the marketing hype about 5 GHz does not go into very many details about this.
In the case of 5 GHz, the 5 GHz signals are much weaker than 2.4 GHz signals, so they do not travel as far or penetrate any obstructions like walls or ceilings nearly as well as 2.4 GHz signals. In many cases, in order to get good 5 Ghz performance, you literally have to have almost a line-of-sight relationship between your computer and the wireless router.
If you have a new dual band router, which broadcasts both a 2.4 GHz and 5 GHz signal simutaneously, your Mac will connect to the best signal quality automatically depending on its location in relation to the router. In the same room, without any obstructions, it will connec to 5 GHz. But, take the laptop down the hall a few rooms and around the corner and the Mac will connect to the 2.4 GHz signal because at that location, the 2.4 GHz signal is not only stronger, it is also faster. -
SOLVED: Dropped connections with Time Capsule and cable modem/router
I've been dealing with random dropped connections for quite a while and I thought that it would be useful to share what I've found.
I was having a very puzzling problem where my internet connection would drop randomly on wireless devices. On my laptop, webpages would suddenly become unresponsive for a minute or two, Mail would have connection problems and complain, etc...but incredibly randomly and definitely not repeatable or in any pattern that I noticed.
I also have 2 Nest thermostats in the house which connect via wi-fi. I noticed that they would randomly show Offline very often when viewed from a webpage or iPhone app, but the Nest front panels showed that they were connected with a strong signal.
As I said, the dropped connections were very sporadic. Most of the time, everything worked, but every once in a while...bam.
I worked with the level 3 tech support guys at Nest for over a week to figure out what was going on. We went through settings on my router and Time Capsule and everything seemed proper and okay. I even replaced the Nests with new ones but still had the same problem. We were all completely stumped.
Yesterday, my laptop dropped it's connection at the same time my wife's laptop dropped hers. At this point, I wondered if something was wrong with the Time Capsule or maybe my internet provider.
I called AppleCare to see if they could help with debugging the problem. They passed me up to a senior wi-fi tech and he asked me many questions about the configuration of my network. My home network looked like this yesterday (see crappy diagram below)
Motorola Cable modem/router
|
Netgear multiport switch
| | | | |
hardwired Macs, TimeCapsule (bridge mode)
laser printers, | | | | |
Apple TVs laptops, Nest, iphones
This configuration seemed correct to me. The Time Capsule in bridge mode would mean that the cable modem/router would be handling DHCP so all the devices would be on the same network and I could print from a laptop to one of my printers and the laptops could connect to the hardwired Macs, etc..
The AppleCare technician said he thought that bridge mode was the problem. He mentioned that there was a known issue that in this configuration, the IP addresses could get lost between the cable modem/router and the Time Capsule. He said it would be best if the Time Capsule was in DHCP/NAT mode and the first device before the switch, this way the Time Capsule was the only device passing out IP addresses.
So I repatched my network like this:
Motorola Cable modem/router
|
TimeCapsule (DHCP/NAT mode)
| | | | | |
Netgear multipart switch laptops, Nest, iphones
| | | |
hardwired Macs,
laser printers,
Apple TVs
I can tell you that in the past 24 hours, I haven't seen anything lose a connection. Not even the Nests which seemed be on and off all the time. And, in this configuration, all the devices are on the same network and able to speak to each other.
I hope that helps someone.So you're saying that Bridge Mode not functioning properly is a well known issue?
Not to me.. I have not had issues with the TC in bridge. And it is my prefered setup. I think it is better as a wireless AP and network hard disk than a router any day of the week.. but there are other ways to skin the cat if it is proving unreliable. I am at the moment using a wireless bridge from the Gen4 TC to a Gen4 AE upstairs for TV internet streaming.. it started off very reliable.. but of late I guess I need to reboot it every few days. And it has required a full reset two or three times.. although I probably need to take some of the blame for those. I am not over worried.. i do not believe in wireless bridges except for the most interim of arrangements.. it will be wired in ethernet ASAP.
Wireless should always be used in a way that respects its status as voodoo.. not stable technology. NOT SCIENCE.. it is more a bag of beads and rattles.
Is there a way to change the cable modem/router to avoid the double NAT problem?
The answer to this may depend on your ISP. Did they provide the modem? If so they may lock it down so you have no control. But normally a Motorola cable modem will not have a bridge mode as such but will have a method of turning off NAT.. (and wireless).. this amounts to the same thing.
Once you turn off NAT.. you need to power cycle the modem so the TC gets the public IP in router mode. The power cycle time might be 5min or 20min or overnight.. it again depends on your ISP.. but you need to stop the modem capturing the public IP so it can be passed to the modem.
Depending on where you are in the world.. US is most concentration of cable network.. you can go out and buy your own modem. Pick one on your ISP list and steer clear of SB.. at least with the apple routers they are problematic.
It also can be a case that the cable modem is SB model and therefore more problematic. Sorry I have forgotten the recommendation for what to buy. There are a number of posts here about it but search is terrible now. (or I am too old to figure it out). I will get Bob to poke his nose in and tell you what works for him. -
Apple TV Inference with Time Capsule and Airport express?
I have recently bought an Apple TV 2, which seem to be working fine, however since installing it on my wireless network both my Time Capsule and Airport Express can't be found. Following some fault finding it seems that when I unplug the Apple TV I can reconfingure the TC and AE.
The TC and AE are configured to join my existing network....and have happy sat there for a few years.
I would really welcome any ideas.
Thanks
RWelcome to the discussions!
It sounds like you have the basic configuration covered correctly.
You might want to check some settings on the TC:
Wireless Mode would be create a wireless network
"Allow this network to be extended" should be checked
The AX should be set to "extend a wireless network"
The "allow wireless clients" box should be checked
In this configuration, the ethernet port on the AX is active so things should work.
A minor point...Although the TC is a dual band device, the AirPort Express is not. Can you make sure that that the Express is connecting to the "main" network on your TC? The "guest" network cannot be "extended".
If you place your laptop close to the Express and hold down the option key while you click on the AirPort icon, some connection information will be displayed. The MAC address of the device that the laptop is connecting to will be indicated. Make sure that that this is the MAC address of the AX, and not the TC.
Another note...If you have not changed the default "main" network, the radio mode is broadcasting 802.11n only at 5 GHz. These higher frequencies are absorbed by walls, ceilings and any obstructions much more quickly than 2.4 GHz signals. So, if you AX is some distance away, you may not be receiving a strong signal for the device at that location.
If you have a signal strength utility on your laptop (the "bars" at the top of the screen are not a very good indicator of actual signal strength), turn off the AX and take a reading to see what kind of signal the Express is receiving where it is located.
Please post back with your results. -
Extending a network with Time Capsule and AirPort Extreme (via Belkin powerline)
Hello -
I've seen many topics about extending wireless networks here, but none seems to resolve the issue I'm having. I currently have a setup where a DSL cable modem is connected to a Time Capsule and I need to extend this network to another room using an AirPort Extreme.
I live in a very old apartment in Brazil and the walls seem to block the signal from one room to another, hence the need to extend it. Since wireless signal is very weak between rooms, I bought a Belkin powerline AV500 so I could connect both Time Capsule and AirPort using the electrical power at home (just installing a regular Ethernet cable between rooms is not an option).
I started with the basics: configure the Time Capsule + DSL as a standalone network, and it works perfectly within it's range. Then I connected the Belking powerline, plugged a MacBook via Ethernet on the other end and still got very good results (actually better speed than expected). Used it for a while with streaming and other network intensive tasks to make sure it could sustain the connection.
Finally, pluggned the AirPort Extreme on the Belking powerline and this is where the problems started. AirPort Utility 6.3.1 only gives me the option of extending a network wirelessly - it doesn't seem to give me the option of extending it via Etherenet (roaming), which is not good in my case. Luckly I had a copy of AirPort Utility 5.6 which seems to do the job (or I thought so), but it's still not working well.
Although I managed to configure both with the same name, it doesn't seem reliable and some devices (the iPhone 5, for example) are unable to connect and end up with a self-asigned IP address. I'm almost sure I'm doing something wrong on the setup, as I've seen a similar setup working before, so if anyone out there has any clue of what can be done, it will be much appreciated.
Attached the screenshots of both Time Capsule and AirPort Extreme configurations.
Thanks a lot,
-TM
AirPort Exteme:
Time Capsule:Hello JuliaApple. Welcome to the Apple Discussions!
You have several ways to configure both base stations for what you are trying to do.
The simplest would be to configure the Time Capsule (TC) to "join" (AirPort Utility > Manual Setup > Wireless tab > Wireless Mode = Join a wireless network) your existing 802.11n AirPort Extreme Base Station (AEBSn). In this type of configuration the TC would perform as any other wireless client and not perform as a router. It will; however, still allow for both backups and sharing USB devices attached to it. -
I am frequently unable to join the internet or, if I can, it is exceptionally slow. The ISP says nothing is wrong ontheir end. Are there any compatibility issues with any ISPs when using Time Capsule and/or iMacs?
Tried this several times to no avail. I believe it is the ISP causing the problem...Time Warner.
-
Installation issues with Time Capsule and Airport express
I hope I'm not over sharing, but I want to get as much info out as possible.
I just purchased a 4th generation Time Capsule and have two 1st gen Airport Expresses, which have always worked flawlessly. The TC is about 6 feet from the cable modem, the first Express is about an additonal 15' away pluged into the power strip with the entertainment equipment. The second AE is an additional 20' further. When "trying" to use the internet via wi-fi in my office, even though the icon on the top of the screen & airport utility shows full connectivity, but in reality I have very slow or no wi-fi.
The TC wireless mode is Create a wireless network, internet connection sharing - share a public IP addressand. Both the AE's wireless mode is Extend a wireless network. The internet correction - connection sharing is off.Your TC replaced what?
Are you extending on 2.4ghz?
There is a chance the TC is lower than the router it replaced.. you may need to get the second Express closer to get a good signal so it can extend properly.. the idea is to have the express in about the centre of signal strength not distance.. use your laptop if you have one with a wireless analysis program like istumbler to find the signal at the TC from say 3M.. at the express 1 and at the express 2. Work out if the signal is too low and move them as appropiate.
Or.. think the arrangement and use something like EOP adapters direct to your office.. they can work hugely better than wireless. (or just as badly.. depending on the house wiring). -
Running a network with Time Capsule and Netgear router - is it possible?
We have an iMac and a Toshiba laptop. I was wondering if it was possible to have a wireless network with a Time Capsule and our Netgear DG834G router. We live in a solid brick house and the Netgear router is upstairs and we find we get very little, if any reception from downstairs. We have just purchased the Time Capsule and we were hoping to move the Netgear downstairs and have the Time Capsule upstairs to get reception all over the house. Is running a network like this possible, and if it is, how do we do it. Both the iMac and the laptop need to be able to connect. Thanks in advance.
g'day
you could try a pair of those http://www.amazon.co.uk/Devolo-MicroLink-dLAN-Highspeed-Starter/dp/B000A7IE7Y
see if this thread can help you in your planning http://discussions.apple.com/message.jspa?messageID=10430294#10430294 -
Bluetooth not working with car audio and macbook pro ret
I use Iphone 5 and macbook pro ret with 10.8.2. but I cant pair it via Bluetooth with any other item (Mercedes Comand). Not even with the Mac. very unhelpfull with a new phone and new apple macbook. what can help
iPhones have NEVER paired with laptops except for the sole purpose of tethering. Have you read your Mercedes operating manual and made sure the Command is in pairing mode?
-
Turning USB HDD (Mac Pro) into Time Capsule for MacBook Pro
I have both a Mac Pro, and MacBook Pro, and have an external HDD connected to my Mac Pro, which is on all the time. I really don't want to keep re-connecting the HDD to my laptop and back to my Desktop computer when I backup my devices. Is there a way, without buying extra hardware, to make the USB HDD a wireless HDD from my Mac Pro, where I can backup my MacBook Pro? Thanks all for your help.
Hi, and welcome to the forums.
Yes.
See #22 in [Time Machine - Frequently Asked Questions|http://web.me.com/pondini/Time_Machine/FAQ.html] (or use the link in *User Tips* at the top of this forum).
Maybe you are looking for
-
Hi, I was wondering if anybody had any experience with an error like this. I have a Labview made Application that is experiencing some conflicts after installation on a Windows 2000 machine. Bare in mind that it has been successfully installed on 200
-
I tunes will not open any. I have downloaded the program, at least 5 times and still not open.
When you double-click the shortcut icon on the computer i tunes download it for 1 second and does not do anything after that. I've tried to open i tunes, the system administrator, but not any result. What can I do?
-
Posting not generating TDS line items
Hi SAP Gurus, After configuring the TDS in company code xxxx, while posting the conversion charges using f-43, the line item for TDS is not generated . For that I selected withholding tax check box in the vendor master n also assigned the withhol
-
How to view a trace of SM49/SM69
Dear Experts, this should be very easy for many of you... I had to determine, why brconnect was not starting via a gateway on another host, I wanted to check the execution through SM49/SM69. As there was very little output, I have noticed, that there
-
I created a JSP file that calls a bean, I placed the bean in Web-inf/classes folder (I manually created classes folder because the application server didn't create it, bug). The problem is that my JSP page cannot access the bean, even when I modify s