Integrating SAP Office Connector(Sonic) in Portal

Hello All
We are using SAP Netweaver 7.0 Ehp 1 sp05.We need to access sap inbox mails in portal,for this we have configured Sonic connector.But still we are not getting any notifications in UWL view.
Is Sonic supported on this version?
Since i am not getting any error in default trace and the user is having SAP_ALL in backend.
regards
Shankar

hi Shankar ,
Did you fix this issue..
I have the same issue with you...
Best Regards,
Bill

Similar Messages

Integrating SAP Java Connector with SAP XI

Hi XI experts
We are about to integrate our SAP ERP2004 system with a new WMS system. The vendors of the WMS system normally integrates with ERP directly through SAP Java Connector, but we would like to put SAP XI between the two systems so we have good way of monitoring the messages beeing sent.
I would like to make a synchronous test scenario where we send a ARTMAS idoc from SAP to XI which sends it to the WMS. After WMS system receives the ARTMAS Idoc it sends an acknowledgement back to XI which passes it on to SAP.
The integration would then look like this:
SAP ERP <-> SAP XI <-> WMS (Jco)
Is this scenario possible? And if so, how would you suggest to set it up?
I was thinking of using the RFC adapter to connect to the Java Connector of WMS, but am not sure if this is the right approach or how it should be set up.
Any help or comments would be greatly appreciated.
Best Regards
Chris

I have made a setup like this:
SAP <-> XI <-> WMS
The Scenario is like this:
SAP sends an ARTMAS03 idoc to XI which maps it directly to the same ARTMAS03 idoc structure (need a few changes in the future so thats why im not using IDOC tunnelling) then it uses a RFC receiver adapter to connect to our SAP gateway, where the WMS is registrered through JCO.
When I first sent the idoc, i got a "RfcAFWException: failed to read funtionname from XML document: missing namespace declaration(2)" then after reading Q23 in note 730870, I used the RFCNormalizer xslt to change the namespace to a "urn:sap-com:document:sap:rfc:fuctions" instead of the "urn:sap-com:document:sap:idoc:messages". The error is now "functiontemplate from repository was <null>".
As far as i can see the error is because the metadata repository defined in the RFC adapter cant find the function module that normally would be in the root of a RFC-XML. But I dont know how I can send an Idoc through the rfc adapter to the gateway then. Anyone got some ideas?
Thanks
Chris

Integrating SAP CRM with IBM Websphere Portal

Hi,
Is it possible integrate SAP CRM with IBM Websphere Portal??
if possible please share the knowledge you have..
Thanks in advance..
Naresh

P L E A S E D O N O T C R O S S P O S T I N D I F F E R E N T F O R U M S

SAP office mail on EP7?

Hi everyone. Is there an iView on EP7 that can display SAP office mails? Or is this already integrated into UWL? Generous points will be awarded! Thanks!

You need to develop an UWL connector for integrating SAP Office Mail.
Check this How-to document http://help.sap.com/javadocs/NW04S/SPS09/uw/UWL_API_SAPOfficeMailExample.pdf
and check this forum posting
SAP Business Workflow
Thanks and Regards,
Prasanna Krishnamurthy

Support for SONiC SAP Office Notification Connector

Hi there,
we may be looking to implement SAP Office Notification Connector
(SONiC) to our portal system (NW7 ehp 1).
I can see that the connector is valid for NW 2004s, so should be
supported for our version of the portal?
Also wondered if this is a fully SAP-supported connector and if there
are any other support implications eg conditions on versions of portal,
business packages, backend systems etc?
Many thanks for your help

Hi Nicholas,
The official stance on the SoNiC connector is located in note number: 945484. Please have a look because support is not valid on the release you are using. The note specifically states the following:
This connector is not supported by SAP for the mentioned releases in the
note validity. (Note validity shows the following: Not supported for:
UWLJWF 700, 701, 710, 711)
"There is no support if any problems or side effects
appear from this connector. Usage of the connector is only on your own
risk in unsupported releases.
The connector is part of the standard delivered software and it is
supported by SAP in upper releases."
So in other words, versions lower than 702 and 720 do not contain the connector, and the customer can implement this at their own risk, but it really shouldn't be used for productive use. In the newer versions this connector comes as standard implementation with the UWL. I hope that this is helpful to you.
Beth Maben
EP - Senior Support Consultant
AGS Primary Support, Business Suite & Technology
Please see the UWL Wiki @
https://www.sdn.sap.com/irj/scn/wiki?path=/display/bpx/uwl+faq ***

Regarding SAP Office Notification Connector

Dear all
We are on EP 7.0 SP12. We want to bring the SAP office mails to UWL. Earlier we had deployed SONiC in our EP 6.0 and is working fine.
I this [Link to SONiC download|https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/8525afd0-0d01-0010-aaa0-ac6b9e3a2907] the supported releases for EP 7.0 is given as SPS07
Can I deploy the same for SP12? Otherwise when will the connector for latest SP's will be released?
Thanks in advance
Regards
Aparnna

If its anything like with EP6 then the SONIC part CAN be a different version to the UWL deliverables since its a different depoy file anyway.
Since the SONIC connector is not officially supported (as far as I know) it is unlikely to be up to date SP for SP. I would guess that this implies you should be using at least EP7.0 SP7.
Haydn

How to define a BW/BI system in Portal using BI SAP Query Connector.

Hi,
How to define a BW/BI system in Portal using BI SAP Query Connector.
Portal>System Administration>System Configuration-->Portal Content >New System (from PAR)>com.sap.portal.systems.bi-->
How to retrive the parameters required from a BI 7.0 System.
Thanks

Hi,
You can refer to this link:
http://help.sap.com/saphelp_nw70/helpdata/EN/c9/b0c8ce704d40fbb18312f8e65b4b0b/content.htm
Hope it will be helpful.
Best Regards,
Assaf Klieger

WebMethods Integration Server Vs. SAP Business Connector 4.7 (BC)

Hi All
       We have to integrate non SAP systems and SAP systems for that we have 2 options
1)   SAP Business Connector 4.7 (BC)
2)   webMethods Integration Server
       which one will be better option for this kind of POC by considering all the issues like interaction with SAP RFC or IDocs, performance, load balancing, salability, maintenance, etc.
     please tell us pro's and cons of both to decide upon which is better option.
     Thanks in Advance
Thanks
Ninad

It is the same product, with different branding.
The only thing is that SAP consider the SAP BC end-of-maintenance, and suggest to use XI.
Regards,
Sandro

Integrating BI based on the BI SAP QUERY CONNECTOR

Hi,
I'am new to BI,i want to use BI in VC,for this i need to integrate BI based on BI SAP QUERY CONNECTOR.
Anybody please provide me a clear documentation on this integration.
With Regards,
Praveen

Hi experts,
I am trying to change workbook settings to display repeated key values.
When doing so, I get a SQL Error and the result is 'No applicable data.'
However, my when my co - worker tries to change the same setting in the same workbook, the setting gets changed.
I have no clue what's going on.
Any ideas?
Points will be assigned.

How to Integrate Portal with SAP OFFICE(Please help me)

Hello Experts,
I have doubts on Portal and SAP office..
Please find the
1) How to show the document info record(DIS,like cv03n or cv04n) in Portal
Please let me know the step by step procedure...
2) After showing the documnet info record(DIS) in the portal,If user clicks on
original attachmnet of documnet info record(DIS) it shoud show the drawing
or diagam in the word or any uformat using SAP OFFCIE:
How to Integrate Portal with SAP OFFICE
Please let me know the details.
Please mail me any documents related to this to my mail id
[email protected]
Thnaks in Advance
Preethi DSouza

Hi Dharani,
Please check this thread.
How will do the connectivity with SAP and Non Sap System
Also ensure you avoid cross-posting. This has been mentioned to you multiple times earlier.
Cheers,
Sandeep Tudumu

Documnet Info record(DIS),SAP MAIL,PORTAL,SAP OFFICE

Hello Experts,
   I have doubts on SAP mail, Portal and SAP office..
   Please find the
1) How can I send a document info record(DIS) Through SAP mail to
     Supplier as     a links...
    I want to send a DIS links(more than 1) to supplier using SAP mail.......
    How can I achive this please lte me know the step by step proceddure
2) When the supplier clciks on the link (DIS LINKS) it should connect to
     Portal   and it should show the documnet info record.
     Please let me know the step by step procedure...
3)   After showing the documnet info record(DIS) in the portal,If user clicks on
     original attachmnet of documnet info record(DIS) it shoud show the drawing
     or diagam in the word or any uformat using SAP OFFCIE:
    How to Integrate Portal and SAP OFFICE
     Please let me know the details.
Please mail me any documents related to this to my mail id
[email protected]
Thnaks in Advance
Preethi DSouza

Nikhil,
BULL's EYE!!!
But just one thing wonders me that why it is only for English translation? what about other languages?
Thanks
Rajendra

SAP office messages can't be opened in UWL

Hi,
I have installed and tested SONIC (SAP Office Notification Connector). I have a SAP_ALL profile. When I receive a SAP office message, I can either open it in the SBWP or in the UWL notification tab (all my messages show up and I can display its content).
I have created other users with no SAP_ALL profile. These users have the right to access to the SBWP and see their messages. When they log on the portal, they are able to see the list of messages, but when they click on display to see their content, the message is empty. I think I am facing an authorization issue, but I have no idea what are the necessary authorization objects I should add to my users' profile.
Any help would more than much appreciated.
Thanks in advance.
Thibault

Did you look what SU53 say? Did you do an authorisation trance with ST01? That will tell you the details if you are facing an authorisation issue.
Regards,
Karri

Call 'SAP Java Connector'

Hi,
has someone integrated in Forms 9.0.4 the call to the 'SAP Java Connector'?
If yes, do you have an HowToDo or a ProfOfConcept?
All Tipps and Tricks are welcome.
Best Regrads
Martin

You probarbly already solved the problem but to others who run into the same problem add the following to the reference.txt file on the server: "reference service:eisconnector library:com.sap.mdi"
The reference.txt is located on the path "..\usr\sap\EP60\j2ee\j2ee_00\cluster\server\managers"
Depending on the portal version a reference.txt might be located on the state controller as well. In that case modify the reference.text on the state controller instead, restart the portal as verify the reference.txt on the server has been add the reference.
/Ole

BI SAP Query Connector test fails!

BI SAP Query Connector test is failing in Portal 7.0 SP6
Scuccessfully tested BI SAP Query connector using the
URL : http://<myhost>:51200/TSapq/servlet/TestSapq
But when i try to test from the portal its failing
The Connection properties are defined both in Connection Connector in Visual admin as well as Portal as follows and user mapping is done as follows.
Application Server myhost.xxx.net
Client : 010
Message Server : myhost.xxx.net
Query Area : x
System Number : 12
System Name : BWT_SAPQ
Master Language : en
User Management
Logon Method : SAPLOGONTICKET
User Mapping : Admin, User
In User Administration i have maped the BWT_SAPQ system and provided user id and password.
Below is test result
Test Connection with Connector
Test Details:
The test consists of the following steps:
1. Retrieve the default alias of the system
2. Check the connection to the backend application using the connector defined in this system object
Results
Retrieval of default alias successful
Connection failed. Make sure user mapping is set correctly and all connection properties are correct.
Would really appreciated your help on this.
Thanks,
Srinivas

hi Aamod;
it seems like you already have your BI SAP Query system working properly, if you can use it in the BI Integration Wizard. what's the problem you're seeing in VC?
systems created with the BI SAP Query Connector are relational systems and therefore expose tables and fields in VC. via the BI Connector, these systems are 'lent' BI functionality and you can use these tables in the BI Integration Wizard, as you've seen. you might therefore call these "relational BI systems" (just like systems created with the BI JDBC Connector are).
if you have consulted the System Landscape documentation on configuring properties for a BI SAP Query System (<a href="http://help.sap.com/saphelp_nw04s/helpdata/en/4b/9afe3323d14005a283dee9101c66fc/frameset.htm">here</a>) and you're still having problems connecting with the BI SAP Query Connector, i'd suggest you write up a CSS message.
hope it helps;
-m

Message: 'user' missing BI SAP Query Connector Test

Dear all,
The BI SAP Connector test to SAP R/3 system D01 results in :
Portal version is EP7 SP15. Any help will be greatly appreciated.
Error> occured >Tue Mar 31 13:42:56,777<
RfcException:
message: 'user' missing
Return code: RFC_INVALID_PARAMETER(19)
error group: 101
key: RFC_ERROR_PROGRAM
at com.sap.mw.rfc.api.RfcOptions.checkLogonData
(RfcOptions.java:201)
at com.sap.mw.rfc.api.RfcOptions.checkParameters
(RfcOptions.java:498)
at com.sap.mw.rfc.api.RfcApi.RfcOpen(RfcApi.java:707)
at com.sap.mw.jco.MiddlewareJRfc$Client.connect
(MiddlewareJRfc.java:1018
at com.sap.mw.jco.JCO$Client.connect(JCO.java:3255)
at
com.sap.ip.bi.sdk.dac.connector.sapq.impl.Connection.connectDB(Connec
tion.java:333)
at com.sap.ip.bi.sdk.dac.connector.sapq.impl.Connection.connect
(Connecti
on.java:128)
at
com.sap.ip.bi.sdk.dac.connector.sapq.SapqManagedConnection.<init>(Sap
qManagedConnection.java:117)
at
com.sap.ip.bi.sdk.dac.connector.sapq.SapqManagedConnectionFactory.cre
ateManagedConnection(SapqManagedConnectionFactory.java:117)
Best Regards, Neeta

hi Aamod;
it seems like you already have your BI SAP Query system working properly, if you can use it in the BI Integration Wizard. what's the problem you're seeing in VC?
systems created with the BI SAP Query Connector are relational systems and therefore expose tables and fields in VC. via the BI Connector, these systems are 'lent' BI functionality and you can use these tables in the BI Integration Wizard, as you've seen. you might therefore call these "relational BI systems" (just like systems created with the BI JDBC Connector are).
if you have consulted the System Landscape documentation on configuring properties for a BI SAP Query System (<a href="http://help.sap.com/saphelp_nw04s/helpdata/en/4b/9afe3323d14005a283dee9101c66fc/frameset.htm">here</a>) and you're still having problems connecting with the BI SAP Query Connector, i'd suggest you write up a CSS message.
hope it helps;
-m

Integrating SAP Office Connector(Sonic) in Portal

Similar Messages

Maybe you are looking for