Integrating Systinet Registry with the XI/PI

Does anyone have experience integrating Systinet Registry with the XI/PI Integration Repository? For example, is it possible to push XI design objects from the Integration Repository to Systinet and maintain synchronization?

Please,
check the following documentation
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/ceb31d4f-0901-0010-60bc-8162e7c6179d
It is an article about the integration of mobile devices with XI from this site.
I hope it helps you.
regards,
Jaime

Similar Messages

Integrating display templates with the Netweaver Portal

Hi friends,
can you please help me how to the integrate SAP xMII display template with the Netweaer portal
Thanks
Srikanth

Hi Srikanth
In case of integrating into NW Portal,
1. U first need to create an IRPT page which contains the desired Display Templates is/are present.
2. Then in the NW Portal <b>Content Administration</b>, create an iView with URL configured in this iView, where the URL should be that path name of target source where the IRPT page is stored such as URL : http://<servername>/<TargetFolder>/<YourIRPTPageName>.irpt
3. Do the rest content objects like Page, WorkSet and Role after u hv successfully configured iView with that IRPT page (u may test this by clicking "Preview" button)
Regards
Som
Please feel free to ask furthers, if necessary

HT3458 Do headphones with integrated remotes work with the iPod Classic models?

I've been looking into getting an iPod Classic, but I wanted to know if any generation of them supports the integrated-remote headphones. I've been getting conflicting answers from other forums, so I'm just trying to get a definitive answer.

Yes, any current iPod classic will use the volume control and track skipping features. The voice memo feature should also work with the integrated microphone in the remote.
tt2

Integrating SAP CRM with the SAP HR module using ALE/IDOC

Hi,
We replicated HR data(employee and position) from SAP HR to SAP CRM system using ALE/IDOC.
Here I have one question,If I change the position to the employee in CRM system,will changes happen in SAP HR system automatically? or Delta changes will haapen? If yes pl explain.
Using change pointers master data changes flowsfrom SAP HR to SAP CRM .
TIA.
PV.

Hi
To integrate... between those systems
first of all u have to create message type to tose fields with t code bd52.
then activate that massege type in bd50.
and after that one u have to activate chaneg pointers globally with bd61.
if u did these thigns if u made any chnegs to those fileds that witll be reflected in the next system
Regards,
Prasad.

Integrating sap crm with the sap HR module

Hi,
We replicated HR data(employee and position) from SAP HR to SAP CRM system using ALE/IDOC.
Here I have one question,If I change the position to the employee in CRM system,will changes happen in SAP HR system automatically? or Delta changes will haapen? If yes pl explain.
Using change pointers master data changes flowsfrom SAP HR to SAP CRM .
TIA.
PV.

Hi,
Its better to post this thread in SAP CRM & SAP HR forum. You may get faster & Better replies.
This may also help:
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/84dd0c97-0901-0010-4ab2-9849fba57e31
Edited by: AJAY TIWARI on Jan 2, 2009 3:56 AM

Integration with Systinet Registry

Does anyone have experience integrating Systinet Registry with the SAP Enterprise SOA technologies? For example, is it possible to push Enterprise Service Bundle definitions from the SAP Enterprise Services Repository to Systinet?

Hi Joseph,
Thanks for your response. If it turns out that there is no simple way of doing this well, I am thinking of building an SAP <--> Systinet bridge. If you are interested in discussing the details, you can contact me off-topic: mark [at] javector [dot] com.
-- Mark

Sun One Search Engine Integration with the Fatwire Content Server

Hello everyone,
I am presently using Fatwire(Divine) Content Server. I have uploaded certain documents using Fatwire flex attributes(metadata). I want to use portal search engine for implementing Full Text Search of uploaded documents. how can i map metadata(attribute) of fatwire/divine content server with the portal server search engine metadata.
I hope someone might have tried it earlier while integrating content server with the portal. please give me some suggestions in this regard.
thanku
jenni

Hi,
I don't know about the metadata mapping,
but you can definitely index the FatWire local
data directory with the search engine.
Just specify "file:///.../<fatwiredir>" as starting point for your search robot.
Cheers,
Alex :-)
PS: After "Sun Forum Accounts Update" I couldn't login to this forum and at SUN
no one cares - they just ignore my mails. "Thanks a lot" for supporting free community!
(Check my old profile at <http://swforum.sun.com/jive/profile.jspa?userID=3455>)
OK. I have now a new account and I will try to help you out here...
-------------------------------------------------------------------------

How to start Integration server with the user XISUPER

Hi,
How to start Integration server with the user XISUPER?
Regards,

Mahesh,
In the post installation document, under Creating User XISUPER,
I see the following,
1.You must now log on to the Integration server host with the user XISUPER, to switch the initial password to a valid password.
2.You must restart the J2EE engine to transfer the user creation to the J2EE immediately.
I am unable to proceed here.Can you please help me to resume the post installation steps ?
Thanks,

Integrating WebLogic Server with CA SiteMinder Web Agent R6

Hi I have searched on the topic of integrating WebLogic Server with the CA SiteMinder Web Agent R6 to provide single sign on services, and have been unable to find anything. Does anyone have any experience with this that could provide some tips, or could direct me to some documentation?

It definitely can work. We have done the same thing in several installations. The question is "How secure does it need to be?" You will be using SM to do authentication. You will configure SSO to trust the SM header variable. If you really want to be secure you need to configure your boxes so that the http server on you SUSE box (for Portal) can only be accessed from the Reverse Proxy. If another machine can access it someone could spoof the header variable and log in as anyone they want.
Hope this is helpful.
Anton

[Solved] How to start wpa_gui with the acpid

I have written a script, which start my wlan.
#!/bin/bash
#/usr/local/bin/wlan
function wlan_start {
# a workaround. reload the module
modprobe -r iwlagn
modprobe iwlagn
ifconfig wlan0 up
dhcpcd -b -q -t 0 wlan0
wpa_supplicant -iwlan0 -c/etc/wpa_supplicant.conf -Dwext -B
wpa_gui &
function wlan_stop {
dhcpcd -q -x wlan0
killall wpa_supplicant
ifconfig wlan0 down
case "$1" in
start) wlan_start ;;
stop) wlan_stop ;;
esac
If I run it from a console (sudo /usr/local/bin/wlan start) the wpa_gui pops up.
I have installed it into the handler.sh from acpi. The script is correctly executed, if fn+f5 is pressed, but wpa_gui does not pop up.
What should I change, that it the gui pops up whith fn+f5?
Edit:
The problem was, that I forgot the access restriction of X.
Adding following code helps:
export DISPLAY=:0.0
export XAUTHORITY=/root/.Xauthority
Remark: /root/.Xauthority is a link to the file of the notebook user.
Last edited by dudell (2010-01-25 10:10:07)

Mahesh,
In the post installation document, under Creating User XISUPER,
I see the following,
1.You must now log on to the Integration server host with the user XISUPER, to switch the initial password to a valid password.
2.You must restart the J2EE engine to transfer the user creation to the J2EE immediately.
I am unable to proceed here.Can you please help me to resume the post installation steps ?
Thanks,

I'm having a problem with the registry and iTunes.

Vista stopped seeing my DVD/CD drive the other day, so I went to the registry and deleted the high and low pass filters for the drive. This fixed that problem.
Only problem now was that none of my programs would see the drive, so I had to reinstall all my burning software and such... except that iTunes, after reinstalling it 5 times, still will not see my drive.
Any ideas or help? Thanks.

Hi David-
The advanced adjustments in the Highlights & Shadows tool were combined into the "Mid Contrast" slider in Aperture 3.3 and later. If you have any images in your library that were processed in a version of Aperture before 3.3, there will be an Upgrade button in the Highlights & Shadows tool in the upper right, and the controls you asked about under the Advanced section. Clicking the Upgrade button will re-render the photo using the new version of Highlights & Shadows, and the Advanced section will be replaced with the new Mid Contrast slider. With the new version from 3.3 you probably don't need the Advanced slider, but if you want to use the older version you can download it from this page:
http://www.apertureexpert.com/tips/2012/6/12/reclaim-the-legacy-highlights-shado ws-adjustment-in-aperture.html

I have a new hard drive and itunes and my computer (windows XP) no longer recognise my ipod. I also had the problem with the registry keys not being present but this has now been fixed. However i can no longer link my ipod up with itunes.

When I first tried itunes with my new hard drive there was the problem with the registry keys but something also flagged up about needing a signed driver. Is this anything to do with why Itunes and my computer no longer recognises when my ipod is linked up? Whatever i try under 'devices' my ipod is never available to sync up. If anyone can help I would be most grateful.

Thanks for your reply. Unfortunately this has not worked. I didn't have quicktime to begin with so I don't know if that makes a difference? After following the instructions, I get the "registry keys missing" problem appear again (which I've subsequently fixed again) and then when I connected the ipod I got the following message - 'Device driver software was not successfully installed'.
I've tried windows update but this doesn't do anything as '...the service is not running'.
Any suggestions?

My Macbook aliminium unibody from late 2008 will not boot. I reach the grey screen with the apple icon and the spinning grey gear. I used disk utility to boot it but it said integrity test failed. I don't know what to do can anyone please help?

My Macbook aliminium unibody from late 2008 will not boot. I reach the grey screen with the apple icon and the spinning grey gear. I used disk utility to boot it but it said integrity test failed. I don't know what to do can anyone please help?

Sounds like you may have a harddrive issue. You are probably going to need to get that changed out and then install the OS X again to get it going.

What do I need to do with the warning of "The registry settings used by the iTunes drivers for importing and burning CDs and DVDs is missing."? I have already uninstalled and reinstalled itunes but there has been no change. I have PowertoGo on my HP.

What do I need to do to correct the problem. Unistalling and reinstalling iTunes has not helped. I have PowerToGo on my HP. I can burn through this program but want to do so by iTunes. Any Suggestions that would help? Diagnostics for iTunes states that "No driver found" E:hp DVD A DH16ACSH.

I'd start with the following document, with one modification. At step 12 after typing GEARAspiWDM press the Enter/Return key once prior to clicking OK. (Pressing Return adds a carriage return in the field and is important.)
iTunes for Windows: "Registry settings" warning when opening iTunes

Report error with the input form using the VC BI integration wizard

Hello All,
I've created a report using the BI integration wizard in visual composer. I've configured the query with the 'Free Form' query template also I've defined the filters there. This is working fine and giving me the report output. When I deploy this , I could see
a start point for the data service.
But instead of the start point with the default values for the filters , I want to have an input form for the users to enter the field values. I added the input form in place of start point. But it's not working even though it doesn't give any error while deploying this report. It gives the following error when I run this report.
" Data service error occurred,cannot execute OLAP queryCannot get data set: Cannot get data set".
Could anybody help on this.
Thanks
Alok

Hi Sandeep,
I'm already draging it from the query input port. Are you referring a different way? How I could have the input variables in the query which I'm creating using the BI integration wizard. To get this input variable I'm trying to add the input form.
Am I doing anything wrong here ?
Pls help.
Thanks
Alok

Integrating Systinet Registry with the XI/PI

Similar Messages

Maybe you are looking for