Integrating tomcat 5.0.28 with apache web server 2.2

hi all
i tried a lot on net but could not get the steps for
connctivity between tomcat 5.0.28 with apache web server 2.2.
any one pzl do help me in finding the solution
pzl do tel me the step by step process for this connectivity
sus

hi :-)
you need jk modules ;-)
i havent try the integrating the version of apache web
and tomcat you specify but you can refer to the links below :-)
gudluck :-)
http://www.serverwatch.com/tutorials/article.php/2203891
http://www.onjava.com/lpt/a/2826
http://raibledesigns.com/tomcat/
regards,

Similar Messages

The tab is bad with apache web server and tomcat

the tab not run with apache web server + tomcat.
It is very bad..

Fijate que solo he estado experimentando con JSC, no he tenido oportunidad de poner nada en producci�n usando la combinaci�n Apache Web Server y Tomcat JSP container y no cuento en �ste momento con �sta configuraci�n para probar.
Nosotros (en donde trabajo) usamos IBM Web Server (basado en Apache Web Server 2), IBM Websphere 6 y las aplicaciones JSF en producci�n est�n hechas con Rational Web Developer.
Ahora he estado muy ocupado con un proyecto urgente, si tengo alg�n tiempo libre la semana entrante tratar� de probar tu combinaci�n (no te prometo nada) pero para ello necesito que me digas las versiones que est�s usando de Apache Web Server y de Tomcat, como est�s enlazando entre ambos con un m�dulo o con ProxyPass y mejor si me mandas el httpd.conf.
Saludos.

Using OC4J with Apache Web Server

Hi,
I followed the instruction to put the following lines in apache/config/httpd.conf:
<IfModule mod_proxy.c>
ProxyRequests On
ProxyPass /servlet/ http://sundev.ultradns.net:8888/servlet/
ProxyPassReverse /servlet/ http://sundev.ultradns.net:8888/servlet/
</IfModule>
I can access my servlet as:
http://sundev.ultradns.net:8888/servlet/MyServlet
But when I tried to access through apache server as:
http://sundev.ultradns.net:80/servlet/MyServlet
I got an error:
The requested URL /servlet/MyServlet was not found on this server.
Thanks,

Are you using OHS aka Apache from an Oracle9iAS install. In Oracle9iAS, there is another servlet engine Jserv configured for URI /servlet and this is causing the problem.
If you are not using JServ then you can disable Jserv by commenting out the directive for mod_jserv in your httpd.conf file and this should work fine.
regards
Debu Panda
Oracle

How to integrate Apache Web Server and Apache Tomcat 4.0 ?

<pre>
Hi All,
Can anyone give me a detailed description(or url that tells so) of how to install the Apache Web Server, Apache Tomcat Server4.0 and Integrate both of them.
Still now I am using Apache Tomcat 4.0 as a standalone application and now I want to learn how to install,use Apache Web Server and integrate this with Apache Tomcat.
Please point me to exact location,url to download the recent Apache Web Server and,
Can I use my existing Standalone Apache Tomcat 4.0 to integrate this with Apache Web Server that I am going to download.
A detailed explanation of how to integrate both is very helpful.
Thanks in advance.
<pre>

The way to integrate Apache Web Server & Apache is very easy. The first step is download the library to connect both servers. This library can be download from http://jakarta.apache.org/builds/jakarta-tomcat-4.0/release/v4.0/bin/webapp-module-1.0-tc40-windows.zip.
Copy the files to APACHE_HOME\modules and open httpd.conf to change any lines:
You find the section "LoadModule" and you add the next lines:
LoadModule webapp_module modules/mod_webapp.so
AddModule mod_webapp.c
And the end of the file you must add these lines:
WebAppConnection conexion warp localhost:8008
WebAppDeploy examples conexion /examples
The first parameter -2nd line- (examples) is the URL name application, the second is the connection's name and the last parameter is the application's name. This name is the same which in servlet.xml.
At last you can add one more lines to check the module's configuration:
WebAppInfo /webapp-info
If you visit http://<yoor_host>/webapp-info you can see the configuration.

How to Configure Apache Web Server with Tomcat web container in Linux

Hi all,
I am working on Tomcat web server 5.0.19 on Linux AS 3.0., ( my Control Server)
I need map my tomcat to Apache Web Server (httpd) in another system
(web server).
I dont have jk2_ or jk_mod .so files to use in my tomcat/conf directory to make them available for httpd.conf files of Apache Web server.
I have only jk2.properties file in my conf.,
Please tell me how to go about it
my mail id [email protected]
Thank You
Subramanyam.V
Hyderabad
India

The simple answer is to download a web server that has a web container already integrated on it, so all that painful configuration work is avoided.
You can use the mature SJS Web Server 6.1 SP5 at
http://www.sun.com/webserver
Or you can try a preview of the upcoming version at
http://www.sun.com/download/products.xml?id=446518d5
You will get better performance and security, with easy of use, at about the same price ;)

Integrating Apache Web Server and Tomcat

Hi,
how do i integrate Apache Web Server (version 2.0) with Tomcat 5, on 2 different machines physically?
I have managed to integrate them on the same machine. Now, I need to separate the 2 into 2 different servers.
Please help.

This is a forum for Sun's Java Application Server.
Sun's AS is built on top of Tomcat and it's free in production (Platform Edition). The Standard Edition provides integration with an Apache HTTP server via a plugin.
http://wwws.sun.com/software/products/appsrvr/home_appsrvr.htm
For Tomcat, try http://jakarta.apache.org/tomcat/index.html
-Alexis

How to install Tomcat 1.4 on Apache Web Server

I'd like to know how to install Tomcat 1.4 on Apache web server. I cant find any instructions from the documentation that goes along with the Tomcat 1.4

1) Use mod_jk.dll. Obtain it from the jakarta's site. (It comes with Tomcat 3.3 and above)Put it in the apache's modules folder.
2) Modify httpd.conf of the A.W.S, append the following line to it:
include TOMCAT_HOME/conf/mod_jk.conf-auto
3) Start Apache W.S first, then restart Tomcat.
It's simple and hope this works!
Rommel Sharma.

Apache web server/jakarta tomcat

Hey guys!
here's the fact, i installed jakarta-tomcat and apache web server, but i don't know how to integrate them, i mean, I just want to have one http server with the functionality to use servlets. Do I need only jakarta tomcat to have this?, please help me.
and forgive my very poor english! :)

Hallo.
Create or edit the file %APACHE_HOME%/conf/worker.properties
worker.list=ajp13
worker.ajp13.port=8009
worker.ajp13.host=localhost
worker.ajp13.type=ajp13
Edit the file %APACHE_HOME%/conf/httpd.conf
LoadModule jk_module modules/mod_jk.dll
AddModule mod_jk.c
JkWorkersFile "%APACHE_HOME%/conf/worker.properties"
JkLogFile "APACHE_HOME%/logs/mod_jk.log"
JkLogLevel debug
Alias /myWebApp "%TOMCAT_HOME%/webapps/myWebApp"
JkMount /myWebApp/*.jsp testWorker
Check the file mod_jk.dll in the folder %APACHE_HOME%/modules/. Howevere there are different libraries for different versions of Apache Web Aerver and Tomcat.
Edit the file %TOMCAT_HOME%/conf/server.xml
<Connector className="org.apache.coyote.tomcat4.CoyoteConnector"
port="8009" minProcessors="5" maxProcessors="75"
enableLookups="true" redirectPort="8443"
acceptCount="10" debug="0" connectionTimeout="20000"
useURIValidationHack="false"
protocolHandlerClassName="org.apache.jk.server.JkCoyoteHandler"/>
Good luck.

Installing 64-bit ColdFusion with 32-bit Apache web server on Windows Server 2008 64-bit

This is related to another discussion that had a solution of using an unofficial 64-bit Apache, which is not permitted in my situation. The discussion is here: http://forums.adobe.com/message/3580001.
I’m having trouble running the Apache and ColdFusion services after connecting the two with wsconfig. I’ve tried replacing the 64-bit mod_jrun22.so with the 32-bit equivalent and the Apache service will then start, but the ColdFusion services error when loading the jvm.dll.
Anyone familiar with this?
Apache Web Server 2.2.22
ColdFusion 9
Thanks.

Looking into the same issue myself. Can you elaborate on this? Which version of the JVM did you upgrade to and did you configure it in the CF Admin to use that jvm?
Using the web connector, I get an error message that the mod_jrun22.so is not a valid win32 application.
Thanks

How to install Apache Web Server with PHP on Sun Solaris Sparc machine

Hi,
We are trying to install the Apache Web Server and the PHP package on a Sun Solaris Sparc machine running on SunOS 5.8. We are having compilation problems with the source code of both these packages.
Does anybody know if there are ready solaris packages for Apache and PHP available from where we can download and install instead of source code compilation?
Or any instructions / things to watch for when installing Apache with PHP (if anybody has tried installing Apache with PHP on Sun Solaris earlier) is most welcome.
Thanks,
Harish

Apache should be bundled along with Solaris check in "/var/apache" in Solaris 8 and Solaris 9
php is available at www.php.net
I found an old document for installing PHP maybe this will help.
Cheers
-Dhruva
+++++++++++++++++++++++++++++++++++++++++++++++++++++++Installing PHP 3.x for Apache 1.x.x on Solaris
Introduction
This document describes how to install PHP for Apache on Solaris.
You should have Apache installed before trying to install PHP.
If you want to use PHP with MySQL then you must install MySQL first.
Before we Begin
1. These instructions assume that you have Apache installed according to instructions.
Getting PHP
1. You must be logged in as root to perform this installation.
su root
2. I save all my downloads in:
/usr/local/dist
If you don't already have one, you may need to create that directory now:
mkdir /usr/local/dist
3. You can get PHP 3.0.14 from here(www.php.net).
cd /usr/local/dist
ftp ftp.php.net
cd pub/distributions
bin
get php-3.0.14.tar.gz
bye
Installing PHP
1. We will install PHP in /usr/local/build, but use a tricky tar command
to do it in on hit from the download directory:
cd /usr/local/dist
tar xvfz php-3.0.12.tar.gz -C ../build
Compiling PHP
1. First let's get where the action is:
cd /usr/local/build/php-3.0.14
2. You now have 3 options:
* Simple PHP install without MySQL - goto step 3
* Simple PHP install with MySQL - goto step 4
* Custom PHP install - goto step 5
3. Simple PHP install without MySQL. Next, jump to step 6.
./configure --with-apache=../apache_1.3.12
4. Simple PHP install with MySQL. MySQL must be installed before you can configure PHP to use it. I recommend that MySQL should always be reachable with /usr/local/mysql. Even if you install it else where you
should create a symbolic link from /usr/local/mysql. Otherwise the compiler can have problems finding the mysqlclient library. The command
should look like this:
./configure with-mysql=/usr/local/mysql with-apache=../apache_1.3.12
Next, jump to step 6.
5. Custom PHP install. Take a look at the available configuration directives by using this command:
./configure --help
6. Now we can make the PHP executable. This may take a while.
make
7. Now we install the PHP module with:
make install
Adding the PHP Module to Apache
1. Now we have to setup Apache to include the PHP module:
cd ../apache_1.3.12
2. Re-configure Apache to use the PHP module. You should use your previous Apache configure command along with the PHP activate module directive.
You can see your previous Apache configure command by doing:
cat config.status
You can configure Apache using the previous command with the added PHP module by doing:
./config.status --activate-module=src/modules/php3/libphp3.a
If you used the simple Apache install from instructions the command will look like this:
./configure prefix=/usr/local/apache activate-module=src/modules/php3/libphp3.a
3. Make and install Apache with PHP enabled:
make
4. We need to stop the server before installing the files:
/usr/local/apache/bin/apachectl stop
5. Now we can install the new binaries:
make install
6. Start apache again (now running the new php enabled version):
/usr/local/apache/bin/apachectl start
Setting Up PHP
1. We have to tell Apache to pass certain file extensions to PHP. We do this in Apache's httpd.conf file.
cd /usr/local/apache/conf
2. Edit the httpd.conf file. If you do a search for php you will find a couple of commented out lines telling Apache to use the PHP module. You should uncomment them to look like this.
AddType application/x-httpd-php3 .php3
AddType application/x-httpd-php3-source .phps
3. I prefer to use the extension .phtml, you can use whatever extension you like (even .html) by adding lines to httpd.conf like this:
AddType application/x-httpd-php3 .phtml
Check that it Works
1. We have to restart Apache to make these changes take effect on the running server.
cd /usr/local/apache/bin
./apachectl restart
2. Apache should now be running with PHP enabled. The server version should include PHP/3.0b2.
./apachectl status
Apache Server Status for dev.synop.com
Server Version: Apache/1.3.9 (Unix) PHP/3.0.12
Server Built: Oct 25 1999 00:37:07
3. Now it is time to test PHP with a page. The simplest thing to do is create a page called test.php3. My file is here. This file contains the
following text:
<?php phpinfo(); ?>
4. Point your browser at this file on the virtual host which you used:
http://localhost/test.php3

Problem with inbuilt Solaris Apache Web Server v 2.0.58

Hi,
Set-up:
We are working on a custom application which works with the inbuilt Apache Web Server on the Sun Solaris platform. Here are the details of the versions of the various components involved:
Apache Web Server: Version 2.0.58
Platform: SunOS 5.10 Generic_127111-03
Our application is in the form of a shared library(.so binary) which is loaded into the Apache Web Server by mentioning the following directive in the Apache Web Server's configuration file (httpd.conf).
LoadModule at_module "/var/apache2/logs/sample/sample.so"
where, sample.so is our application's binary
and at_module is the name of the module.
httpd.conf file has been attached for your reference.
Attachments:
httpd.conf - Apache Web Server's configuration file.
sample-apache.cpp - Sample program which is showing the problem.
httpd.h - Apache Software Foundation's file which contains the structure "request_rec" that represents the current request.
Problem summary:
For each request to the Apache Web server, the server maintains a table of type "apr_table_t" which contains the header environment from the request. There is a structure "request_rec" maintained in the httpd.h file:
/** A structure that represents the current request */
struct request_rec {
/** The pool associated with the request */
apr_pool_t *pool;
/** Request method (eg. GET, HEAD, POST, etc.) */
const char *method;
/** MIME header environment from the request */
apr_table_t *headers_in;
In our case, when we try to retrieve the address of "headers_in", we get a NULL Value. Please refer to the attached "sample-apache.cpp" program. In this program, inside the access_checker() method, we try to retrieve the address of "headers_in" and get that as NULL:
extern "C" int access_checker(request_rec *r)
     FILE * fp;
     fp = fopen("/var/apache2/logs/sample.txt", "a");
     fprintf(fp, "\n r->headers_in = %u, r->method = %s", r->headers_in, r->method);
     fclose(fp);
     return OK;
Here is the output of the sample program after accessing the main page of the Web server:
r->headers_in = 0, r->method = GET
r->headers_in = 0, r->method = GET
r->headers_in = 0, r->method = GET
Though we are able to retrieve one member of the structure request_rec (method), we are not able to retrieve the address of the other member (headers_in).
Observation:
We made an interesting observation that when we used the same sample program with the inbuilt Apache 2.0.52 Web Server on Solaris, we were able to successfully retrieve the address of headers_in. Here are the details of the set-up which is working fine:
Apache Web Server: Version 2.0.52
Platform : SunOS 5.10 Generic_118822-30
Thus, there is something different which has happened between the Sun's Solaris Apache Web Server's versions 2.0.52 and 2.0.58 which is making it unable to retrieve the address of the request headers (headers_in).
I am requesting someone to kindly shed light on this difference and let us know if we need to change the way of retrieving the request headers for Solaris Apache 2.0.58.
Thanks,
Atul.

The only way you can achieve it is by running the web server to listen on port 80
Please change the port in your httpd.conf file for the webserver and restart it.
If any other processes are running/using on port 80 on that machine, then please stop them, otherwise you will not be able to achieve your requirement.
Arun

Should I install Apache Web server to use Jakarta Tomcat Servlet engine?

Hello,
I have some problems and now have a question:
Should I install Apache Web server to use Jakarta Tomcat Servlet engine?
JTK home page is available via http://localhost:8080
Tomcat ver 3.1.3
Thanks.

No, you don't need to run Apache webserver (httpd) to run Tomcat. Tomcat by default runs on port 8080, but you can set it to any port, including 80, if you have permission to do so (on *nix systems, you need root permissions to run services on any port below 1024).
Tomcat is a webserver as well, just one that includes a servlet container and JSP processor. So it will serve your html files, images, etc (aka static content), just as well as Apache httpd, in addition to being able to run servlets and JSPs.
Apache httpd has more options for serving static content than Tomcat, so many people prefer to use it as their main webserver and only use Tomcat as a sort of "plugin" to handle servlets and JSPs. This can be achieved through a connector. Instructions on how to set this up are on the Jakarta website.
So you could use Apache and Tomcat combined, next to each other, or totally separated. In many cases, just Tomcat will do.

Install Apach web server and Tomcat

Is it possible to install Apach web server and Tomcat into Oracle Application Server?
If possible, which way is the best? People said that I would better install Apach web server and Tomcat in Redhat.
If you know the answer, would you mind give me the answer or document link?
Thanks

Tomcat is just a servlet engine. Oracle Application Server already includes a servlet engine. Apache is a default component too.

Apache Web Server & Tomcat Join

Hai all
i learnto Tomcat is not a web server where u can use it as Web and Aplication server. we need to use Apache Web server and connect it to Tomcat this is the only good way of using tomcat as web server.
i have new version of Apache Web Server and Tomcan can anybody give me the steps to connect both into one ?
please help me
thankyou
Rajesh

It depends on the complexity of your application, you may not need Apache server. Tomcat by itself should do the job. And yes, Tomcat is a web server.
Hope this helps.

How to save uploaded image file to Apache Web Server from Tomcat

Hi guys,
Perhaps this is not an appropriate topic to ask under this forum but I really don't know where should I post my question. Hope you understand.
Ok, I need to know if my web application is running in Tomcat5 and user uploading some image file where I need to save these image files to the other server, which is running Apache Web Server. Should I ftp to there or other better method ?
Anyone got a better idea on doing this kind of process pls advice. Many Thanks !
regards,
Mark

if your Apache server is running in the same computer and if your servlet have write access to the folder in apache under which you want to save the file you can just write the file there but you will have to address concurrency issues.
Otherwise you will have to do ftp but since apache does not have abuilt in frp server you will need a seperate FTP server for this

Integrating tomcat 5.0.28 with apache web server 2.2

Similar Messages

Maybe you are looking for