Integrating TortoiseSVN with LabVIEW's Compare tool
I’m trying to set up the TortoiseSVN Diff tool, as described:
https://decibel.ni.com/content/docs/DOC-12175 and
http://digital.ni.com/public.nsf/allkb/3BEC521972301FF2862576EA00609CA6
To configure TortoiseSVN to use LabVIEW’s compare tool I added the following for “.vi” file extensions:
"C:\Program Files (x86)\National Instruments\Shared\LabVIEW Compare\LVCompare.exe" %mine %base -nobdcosm –nobdpos
The links above tell you use “Program Files,” but on my system the LVCompare.exe is located in my “Program Files (x86)” directory.
When I try to run the diff tool (right click on the file in question -> TortoiseSVN -> Diff with previous version), I get the following error:
I cannot get the LVCompare tool to work with the command prompt either, as described:
http://zone.ni.com/reference/en-XX/help/371361H-01/lvhowto/configlvcomp_thirdparty/
I did notice that it mentions the Compare tool is only available with LabVIEW Professional Development System. Does this apply for using it with TortoiseSVN as well? I am running LabVIEW 2011 Full Development System on Windows 7 (64 bit). The version of TortoiseSVN I am using is: TortoiseSVN 1.7.6, Build 22632 - 64 Bit , 2012/03/08 18:29:39 Subversion 1.7.4.
Any help getting the LVCompare tool integrated with TortoiseSVN to work would be greatly appreciated!
Thanks!
Lauren
Lauren_CPC wrote:
I cannot get the LVCompare tool to work with the command prompt either, as described:
http://zone.ni.com/reference/en-XX/help/371361H-01/lvhowto/configlvcomp_thirdparty/
I did notice that it mentions the Compare tool is only available with LabVIEW Professional Development System. Does this apply for using it with TortoiseSVN as well? I am running LabVIEW 2011 Full Development System on Windows 7 (64 bit). The version of TortoiseSVN I am using is: TortoiseSVN 1.7.6, Build 22632 - 64 Bit , 2012/03/08 18:29:39 Subversion 1.7.4.
Yes it does. LVCompare is only a simple wrapper executable that eventually tries to run a VI in the LabVIEW installation directory. And this VI will not work if the LabVIEW installation is not licensed as Professional Development system.
Note to the AEs: In the second link of Laura's post, it states incorrectly: Primary Software: LabVIEW Development Systems>>LabVIEW Base Package
This is completely contradictory to the note in the last link, that states that the Professional Development System is required. A documentation correction request seems in order.
Rolf Kalbermatter
CIT Engineering Netherlands
a division of Test & Measurement Solutions
Similar Messages
-
Configuring ClearCase with LabVIEW SCC
Hi,
I am developing VIs with LabVIEW pro. We are using ClearCase for SCC and I would like to configure LabVIEW with ClearCase.
VIs are stored under vobs on a world wide network.
Does anyone know how I can do?
Second question, is it possible to configure ClearCase to use the LabVIEW pro compare tool? This will give ClearCase the capability to compare VI versions.
BR,
Pascal.Hello,
ClearCase is not supported by LabVIEW, if you want to use a SCC, you can perform this task with the following SCC providers: Perforce and Visual Source Safe and Built-in.
Built-in SCC is recommended only for small projects and is available in LabVIEW at no additional cost. “Microsoft Visual Source Safe” and “Perforce SCM” are complete SCC tools that are fully integrated into LabVIEW but must be purchased from the corresponding vendor.
You can find more information at the following link:
http://zone.ni.com/devzone/conceptd.nsf/webmain/69ea27204d24f78586256e2400773abe
If you really want interfacing LabVIEW and ClearCase, VI Engineering can perhaps help you:
http://zone.ni.com/devzone/conceptd.nsf/webmain/ddaa22e726919f118625700000009ca9
Best regards
Alexandre D
AE, National Instruments -
LabVIEW Compare Tool load time of files from repository
I have the LabVIEW compare tool setup for differences for .ctl and .vi files in Surround SCM source code control system. The source code control system runs on a networked server. My PC is on the same network as the server.
When the LabVIEW compare tool reads VIs that are from a source control repository for diffing against files on my computer, it seems to load the repository files from a temporary folder located in users\username\appdata. It takes a long time to load VIs that have lots of subVIs because as the tool searches for each subVI the tool begins its search in the vi.lib and instr.lib folders before finding the subVI in the temporary folder. It is taking a few seconds and sometimes as much as 10 seconds to load each subVI. This takes a lot of time to Diff VIs that have many subVIs. Is there a way to make the diffing process go quicker? Or is this something that would need to be fixed in the LabVIEW compare tool?
Thanks,
Gary
Solved!
Go to Solution.That's the normal behavior of the LVCompare.exe, and the folders at which starts looking for subVIs or control files (.ctl) cannot be modified. The available options that can be configured are the following:
Configuring Source Control with LVCompare.exe
http://zone.ni.com/reference/en-XX/help/371361H-01/lvhowto/configlvcomp_thirdparty/ -
EP integration with third party BI tools
Hi,
I was looking for information and pointers on EP integration with third party BI tools like Business Objects etc. Would be grateful.
Thanks,
MadhuThanks. We have a full fledged Business Objects reporting environment. My question is: As a beginner in the EP space, I would like to understand how to treat the Business Objects environment as one of the content providers for the Enterprise Portal? Are there any documents or manuals that talk about the integration of EP with Business Objects? I know the question is too broad, but any pointers would be useful.
-
Integration of ADF with Vignette(Content Management Tool)
Hi
Is it possible to integrate ADF with vignette(Content Management Tool) in any way so that i could have the power of both the tools in developing web pages and managing the contents of it in a better way?ADF is an standards-based J2EE development framework, if Vignette support integration with J2EE applications then the answer would be yes, but you need to ask Vignette support.
BTW - this forum is for Oracle Portal questions, please use the ADF forum for questions on ADF.
Thanks,
Mick. -
Siebel Integration with Lotus Knowledge Management Tool
Hi,
I am currently working on Siebel 8.1 and have a requirement to integrate it with Lotus Knowledge Management tool.
Does Oracle provide OOTB adapters for integration for Lotus KM just like Inquira?
Please let me know.
Regards.Hi,
I am not able to find any information regarding integration of Lotus Knowlegde Management with Siebel.
Unless someone else in this forum has an answer, I recommend you to open a Service Request in support.oracle.com to confirm if such integration exists, and if not ask for a product enhancement request for this integration or request another solution that may be suitable. You can also contact IBM to verify if they have performed any validation using both products.
Thanks,
Wilson -
I never used LabView but need to generate a RS-233 serial output string that contains an IRIG timestamp based on a contact closure. Is LabView an appropriate tool to do this? How much does it cost to get started with the product?
Labview isn't cheap, but it would certainly allow you to build a program (set of vi's - virtual instruments) that would do what you describe. Where would the timecode information come from? Your vi, or program, would: Start up, initialize the serial port, loop until a trigger happened, read the timecode (from where?), output that timecode out the serial port in a loop until you pressed the stop button. There is a free evaluation of Labview software available from NI - the base product itself runs about $995.
- Dave -
Canon digital camera integration with Labview
hi,
i need to integrate canon digital camera with labview.
i have applied for the SDK from canon , and waiting for the
reply from them. i have got a liitle control of the camera from the
dll from PS remote from http://www.breezesys.com/PSRemote/
but not able to grab the images to labview ,
if any one has worked on similar applications kindly help
thanks and regards,
sundar.hi there,
there's a function SetOutputPath(path) where you can specify the path where the driver of the camera saves the pictures. for more information see the SDK docs. after the pictures have been saved to disk you can read the files with the LV-VIs from the "Graphics & Sound" palette. there are some examples shipped with LV of how to read image files.
Best regards
chris
CL(A)Dly bending G-Force with LabVIEW
famous last words: "oh my god, it is full of stars!" -
Verilog code in ISE 14.2 can be integrated with LABVIEW 2013?
i just want to ask if it is possible to integrate the verilog code with the VI in labview? will it work properly?
Yes it is possible to integrate Verilog code with LabVIEW 2013. The following KnowledgeBase article is currently being updated to reference LabVIEW 2013:
http://digital.ni.com/public.nsf/allkb/7269557B205B1E1A86257640000910D3?OpenDocument
I have used ISE 14.4 with LabVIEW 2013 without any issues. Hope this helps!
Daniel K | NI Applications Engineer | Certified LabVIEW Developer -
Integrating custom PCIe hardware with LabView
Hi, I am new to LabView so appologize if question is in the wrong place.
I have a custom PCIe acquisition card that I want to use in LabView environment to postprocess some data. So far the board has been used successfully with its windows drivers and VS.NET software. What is the process for setting up a device like that in LabView? Can LabView use the COM object windows driver just like a Visual Studio project would? If yes, is there a document that explains how this is done?
I have worked with NI's own instruments where the driver is provided and seamlessly integrates into the LabView, but I am a bit lost with this custom non NI board.
Thank you.Thanks. I tried searching that site for examples... but this is a board that our company has developed (software defined radio) and I am certain no one has written any drivers for it yet. Thats the problem statement that I am trying to research. What would it take to make the board we designed compatible with LabView. Since this is a Software defined radio platform, LabView offers some useful functions that can be used to postprocess and analyze data captured by our card.
Ideal goal is to have LabView module capture data from PCIe buffer allowing for further processing (filtering, FFT, demodulation, etc...). I would appreciate if you can direct me to some examples or literature on this topic.
Thanks,
Anton -
Replacing a PLC with LabView Article
I just read the article "Replacing a Programmable Logic Controller (PLC) with LabVIEW and FieldPoint for Composting Plant Automation ". I am very concerned by the author's lack of knowledge about current PLC's. This article does not fairly compare the two platforms and is not accurate. For example, the author states that 100 msec is a typical response time for a PLC. This is absurd. Today, even low end PLCs can achieve responses time below 10 msec and high end PLCs even as low as 1 msec. It all boils down to specifying the right hardware for the application. One real danger the author does not address with building a "soft PLC" is the potential for the I/O not to fail to a safe condition if the operating system (Windows) lock
s up. This can be disastrous and unsafe for many control applications. I would suggest any reader that is seriously considering replacing a PLC in an industrial environment with a "soft PLC" watch out for this potential shortcoming. Readers can visit www.isa.org to find additional information on this issue.
I would not dispute that for a pure data acquisition application LabView can offer a superior solution. The safety conern can be mitigated if there is a "hard wired" safety system that has been properly designed. However, many times the PLC may provide safety shutdowns that depend on its true deterministic operating system and high reliability.
I hope that readers will not interpret this as a slam against LabView but as encouragement research this issue further from a different perspective.I can see from your comments that you have a firm grasp of the PLC/vs PC concept, and agree with your comments. I have been an instrumentation developer/integrator for 36+ years, and have first hand experience with the situation(s) to which you refer. I have found the optimum solution has been a combination of PC/MMI software and PLC hardware. I have many such systems up and running in different industries, and have found this to be the best overall solution. Let the PC do what it does best(MMI display, complex calculations and decision making), and the PLC what it does best(solid deterministic control, with a non-windows operating system). I usually use an OPC server for communication between the two units, and with proper software design on both ends,
and a hardwired E-Stop system, excellent overall opertion/safety is achieved.
Your comments should serve as good stimulus for other developers.
Dave -
Weblogic integration kit with VAJ 4.0
Will support be added for the Weblogic integration kit for IBM VAJ 4.0 now
that 4.0 professional is available?
Alex GarrisonHi,
In VAJ3.5.3 Weblogic Bridge documentation ...
The docs/userguide.pdf says that (In service-PAck for Integration-Kit)
Import VAJ35weblogic510spX.zip where 'X' is the service-pack number
BUT...I don't find VAJ35weblogic510sp10.zip Anywhere on BEA site.
Please let me know where to get it from if it is ever available.
How do you upgrade the bridge to SP10?
Thanks,
Harish.
Jim Edwards-Hewitt <[email protected]> wrote:
>
Hi, Alex,
While I'm not in a position to commit to anything official (I'm in
engineering, not PM), I think I can safely say that if the name "IBM"
isn't a problem for us, the name "WebSphere" won't be either. (And the
way IBM is going with slapping "WebSphere" on everything they can so
they can claim more WebSphere sales, they're practially synonmymous.
I'm not working on our VisualAge stuff now, but I did in the past. We
put a tremendous amount of effort into integrating with VisualAge for
comparatively little return, because the VAJ API is so limited, but it
was worth it to do the best we can to allow you to use VAJ to develop
for WebLogic, and not abandon VisualAge users to WebSphere. If IBM
moves to a tool that makes it easier for us to do that and lets us
provide a better user experience, then I believe we'll take advantage
of
it. (And of course, IBM is using tools to try to steer developers to
WebSphere, so if we can make them work well for WebLogic, too, that
helps us as well as benefiting developers.)
-- Jim
Alex Garrison wrote:
Michael,
I will certainly do so, and I will ask the other developers here todo so as
well. However, since IBM is phasing out VAJ in favor of a WSW-basedIDE,
and since WSW is open source/open API, perhaps this will be a mootpoint a
year from now. BTW: I know that IBM says it will continue to supportVAJ
for at least the next two years, but I dont have to be beat over thehead to
see that VAJ is dying and IBM is moving to the WSW-based IDE.
A big concern in the VAJ community is whether partners like BEA willwant to
remain partners with a product that has the name "websphere" in it(WSW =
Websphere Studio Workbench). I would move to a more platform-neutralIDE
like JBuilder in a heartbeat if it wasnt for the $3000 (oh excuse me,$2999)
per seat enterprise license.
Alex Garrison
"Michael Girdley" <----> wrote in message
news:[email protected]...
It is being worked on. No ETA yet.
I would encourage you to vote on IBM's Web sites open the VisualAge
APIs
to
partners like BEA.
http://commerce.bea.com/downloads/weblogic_server_tools.jsp
Michael Girdley
BEA Systems
Learning WebLogic? http://learnweblogic.com
Buy the only book covering J2EE & WebLogic 6:
http://www.amazon.com/exec/obidos/ASIN/0130911119/learnweblogic/103-9227026-
4636613
"Alex Garrison" <[email protected]> wrote in message
news:[email protected]...
Will support be added for the Weblogic integration kit for IBM
VAJ 4.0
now
that 4.0 professional is available?
Alex Garrison -
HI Friends,
I need some documents or any links on how SIEBEL system can be integrated with SAP system.
Thanks,
Lavanya.Hi
First of all, integrating Siebel with SAP is certainly something
that can be done. You mention that your client is moving to 4.6
which is very good for any integration endeavor since 4.6C has almost
2000 BAPIs compared to 400 in 4.0. The hardest part of the project
will be to exactly define the interfaces required and find out
which BAPIs and/or IDoc Message Types to use for the communication.
Make sure that the BAPIs/IDoc Message types you have identified
cover the specific functional requirements your client has.
If not, you may need some custom ABAP development.
If you are looking for tools to help with the project, take at look at
www.scribesoft.com. They have a lot of experience in the CRM world
and specific connectors for SAP and Siebel.
Regards -
Anyone Use GIT with LabVIEW?
I think that the vast majority of people using SCM with LabVIEW are using either Perforce or SVN. Is there anyone who either uses or has used GIT, integrated into LabVIEW or not integrated? (I think there is a tool that uses the SVN protocol to talk to GIT)
If so what were your experiences?
=====================
LabVIEW 2012There are several other posts on LAVA mentioning GIT (I think a lot where from FIRST). Post there (just link this post there as cross-post).
I personally think, that my arguments don't speak against GIT. I've been using SVN and Hg(mercurial) without any integration in the LV IDE (although I have some integration for Hg yet).
I forgot to mention: Using SVN you could use the plug-in from JKI. If your company invests the money, I'm sure it' a **bleep** good deal.
All these tools perform very well, even if you don't have the native LV support (as VSS, Perforce).
If you want a poll, you can check the NI-community features. Just setup one for SCC specifics. I was planning to do one myself, but I don't have the time. It' still not as good (from the quality and quantity of posts) a the forums, but has some cool features (wikis, polls). Advertise this on the most up-to-date posts on SCC issues. I and many others will drop in, I'm sure.
Felix
www.aescusoft.de
My latest community nugget on producer/consumer design
My current blog: A journey through uml -
Disk Utility has Lost Connection with the Disk Managment Tool
Hi,
For starters, this problem is not associated with the thread that Brian Z. has posted at the top of this forum. Having said that, here's my problem:
I had installed Security Update 2006-003, and Quicktime 7.1. Permissions were repaired before and after each installation, and all went well.
Some hours later, I was experimenting with Apple Remote Desktop. I had activated ARD in the System Preferences>Sharing pane, and it provided me an IP address associated with ARD. I then turned on Airport, and ARD provided me with an IP address associated with that connection. However when I turned off my modem connection, System Preferences>Sharing hung, and had to be Force Quit.
Console Log follows:
===== Mon May 15 2006 ===== 21:09:09 America/Anchorage =====
2006-05-15 21:09:17.488 System Preferences[2732] Can't open input server /Library/InputManagers/Menu Extra Enabler.bundle
2006-05-15 21:09:28.224 System Preferences[2732] ### Error:268435460 File:FileSharing.m Line:308
2006-05-15 21:09:38.230 System Preferences[2732] ### Error:268435460 File:FileSharing.m Line:343
2006-05-15 21:09:48.415 System Preferences[2732] ### Error:268435460 File:FileSharing.m Line:343
Thinking a plist had become corrupted, I trashed the following:
com.apple.systempreferences.plist
com.apple.RemoteDesktop.plist
com.apple.Remotemanagement.plist
com.apple.sharing.firewall.plist.
System Preferences started out very slowly, but then all the panes except Sharing would work ok.
I booted from the install disk and performed a Disk Repair. There were no problems reported.
When I tried to run a Repair Permissions, after about 20 seconds I got the, "Disk Utility has lost connection with the disk management tool and can not continue. Please quit and relaunch Disk Utility."
I quit D.U. and the Installer, and was able to successfully run a Repair Permissions from the D.U. in my Utilities folder. It had no problems to report.
Continuting to troubleshoot the System Preferences problem, I then trashed the com.apple.preferencepanes.cache. This solved my System Preferences>Sharing problem.
However, I am still unable to perform a Repair Permissions after booting from my install disk (I get the subject message). Repairing permissions from the Disk Utility in my Utilies folder works fine.
Any thoughts out there on a logical way to troubleshoot where my problem is? Is there a way to get a console log when I'm running DU from the install disk, or a comparable source??
Thanks,
BobI found this crash log that was generated about the time I had problems with System Preferences hanging.
Thoughts?
Bob
Entitled "writeconfig.crash.log"
Host Name: Bobs-Big-Mac.local
Date/Time: 2006-05-15 21:08:17 -0800
OS Version: 10.3.9 (Build 7W98)
Report Version: 2
Command: writeconfig
Path: /System/Library/PrivateFrameworks/Admin.framework/Resources/writeconfig
Version: ??? (???)
PID: 2707
Thread: 0
Exception: EXC_BREAKPOINT (0x0006)
Code[0]: 0x00000001
Code[1]: 0x90a8d2c0
Thread 0 Crashed:
0 com.apple.Foundation 0x90a8d2c0 _NSRaiseError + 0xf8
1 com.apple.Foundation 0x90a349d8 -[NSConnection sendInvocation:] + 0x6a4
2 com.apple.Foundation 0x90a2d8e0 -[NSObject(NSForwardInvocation) forward::] + 0x198
3 libobjc.A.dylib 0x90866810 objcmsgForward + 0xb0
4 writeconfig 0x0000baac 0x1000 + 0xaaac
5 writeconfig 0x0000ec84 0x1000 + 0xdc84
6 writeconfig 0x0000ad88 0x1000 + 0x9d88
7 writeconfig 0x0000abfc 0x1000 + 0x9bfc
PPC Thread State:
srr0: 0x90a8d2c0 srr1: 0x0202f030 vrsave: 0x00000000
cr: 0x24000442 xer: 0x00000000 lr: 0x90a8d298 ctr: 0x90a23528
r0: 0x00000000 r1: 0xbffff430 r2: 0xa0a204bc r3: 0xa0a34e20
r4: 0x9086eb88 r5: 0x20000000 r6: 0xbffff110 r7: 0x00000000
r8: 0x00000001 r9: 0x0030d370 r10: 0x00000239 r11: 0x28000442
r12: 0x90a23528 r13: 0x00000000 r14: 0x00000000 r15: 0x00000000
r16: 0x00000000 r17: 0x00000000 r18: 0x00000000 r19: 0x00000000
r20: 0x00000000 r21: 0x00000000 r22: 0x00000000 r23: 0x00000000
r24: 0x00310680 r25: 0xbffffcd8 r26: 0x00311c50 r27: 0xa0a2af6c
r28: 0xa0a30e7c r29: 0xa0a24ae0 r30: 0x003109a0 r31: 0x90a8d1d0
Binary Images Description:
0x1000 - 0x28fff writeconfig /System/Library/PrivateFrameworks/Admin.framework/Resources/writeconfig
0x80830000 - 0x8090efff libxml2.2.dylib /usr/lib/libxml2.2.dylib
0x8c2bc000 - 0x8c2c5fff libBSDPClient.A.dylib /usr/lib/libBSDPClient.A.dylib
0x8fe00000 - 0x8fe4ffff dyld /usr/lib/dyld
0x90000000 - 0x9014ffff libSystem.B.dylib /usr/lib/libSystem.B.dylib
0x901c0000 - 0x9026efff com.apple.CoreFoundation 6.3.9 (299.37) /System/Library/Frameworks/CoreFoundation.framework/Versions/A/CoreFoundation
0x902b0000 - 0x90529fff com.apple.CoreServices.CarbonCore 10.3.7 /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/CarbonC ore.framework/Versions/A/CarbonCore
0x905a0000 - 0x90610fff com.apple.framework.IOKit 1.3.6 (???) /System/Library/Frameworks/IOKit.framework/Versions/A/IOKit
0x90640000 - 0x906c8fff com.apple.CoreServices.OSServices 3.0.1 /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/OSServi ces.framework/Versions/A/OSServices
0x90733000 - 0x90740fff com.apple.CommonPanels 1.2.1 (1.0) /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/CommonPanels. framework/Versions/A/CommonPanels
0x90810000 - 0x90810fff com.apple.ApplicationServices 1.0 (???) /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Application Services
0x90860000 - 0x908cffff libobjc.A.dylib /usr/lib/libobjc.A.dylib
0x908f5000 - 0x90912fff com.apple.audio.SoundManager 3.9 /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/CarbonSound.f ramework/Versions/A/CarbonSound
0x90940000 - 0x909b3fff com.apple.DesktopServices 1.2.5 /System/Library/PrivateFrameworks/DesktopServicesPriv.framework/Versions/A/Desk topServicesPriv
0x90a20000 - 0x90b7bfff com.apple.Foundation 6.3.8 (500.61) /System/Library/Frameworks/Foundation.framework/Versions/C/Foundation
0x90d40000 - 0x90d40fff com.apple.Carbon 10.3 (???) /System/Library/Frameworks/Carbon.framework/Versions/A/Carbon
0x90d50000 - 0x90d6bfff com.apple.SystemConfiguration 1.7.1 (???) /System/Library/Frameworks/SystemConfiguration.framework/Versions/A/SystemConfi guration
0x90d7c000 - 0x90d8cfff com.apple.speech.recognition.framework 3.3 /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/SpeechRecogni tion.framework/Versions/A/SpeechRecognition
0x90dd0000 - 0x90df0fff com.apple.DirectoryService.Framework 1.7.2 /System/Library/Frameworks/DirectoryService.framework/Versions/A/DirectoryServi ce
0x90e10000 - 0x90e11fff com.apple.ServerControl 10.2.3 /System/Library/PrivateFrameworks/ServerControl.framework/Versions/A/ServerCont rol
0x90e13000 - 0x90e4bfff com.apple.LaunchServices 10.3.5 (98.4) /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ LaunchServices.framework/Versions/A/LaunchServices
0x90e60000 - 0x90e66fff com.apple.ServerPrefs 10.2.3 /System/Library/PrivateFrameworks/ServerPrefs.framework/Versions/A/ServerPrefs
0x90e80000 - 0x90e9ffff com.apple.MediaKit 2.6 (232.3) /System/Library/PrivateFrameworks/MediaKit.framework/Versions/A/MediaKit
0x90ec0000 - 0x90ec0fff com.apple.Cocoa 6.3 (???) /System/Library/Frameworks/Cocoa.framework/Versions/A/Cocoa
0x9102d000 - 0x91047fff com.apple.openscripting 1.2.1 (???) /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/OpenScripting .framework/Versions/A/OpenScripting
0x910c0000 - 0x910c1fff com.apple.AFPDefines 2.0.1 /System/Library/PrivateFrameworks/AFPDefines.framework/Versions/A/AFPDefines
0x910e0000 - 0x91134fff com.apple.bom 1.2.7 (64.1) /System/Library/PrivateFrameworks/Bom.framework/Versions/A/Bom
0x91141000 - 0x91141fff com.apple.CoreServices 10.3 (???) /System/Library/Frameworks/CoreServices.framework/Versions/A/CoreServices
0x91230000 - 0x9123afff com.apple.framework.machinesettings 1.3.3 /System/Library/PrivateFrameworks/MachineSettings.framework/Versions/A/MachineS ettings
0x91242000 - 0x9124cfff com.apple.framework.AppleTalk 1.2.0 (???) /System/Library/Frameworks/AppleTalk.framework/Versions/A/AppleTalk
0x91251000 - 0x9125afff com.apple.DiskArbitration 2.0.5 /System/Library/PrivateFrameworks/DiskArbitration.framework/Versions/A/DiskArbi tration
0x912e0000 - 0x912f7fff com.apple.LangAnalysis 1.5.4 /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ LangAnalysis.framework/Versions/A/LangAnalysis
0x91303000 - 0x91370fff libvDSP.dylib /System/Library/Frameworks/Accelerate.framework/Versions/A/Frameworks/vecLib.fr amework/Versions/A/libvDSP.dylib
0x913a0000 - 0x9145ffff ColorSync /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ ColorSync.framework/Versions/A/ColorSync
0x915e0000 - 0x91699fff com.apple.QD 3.4.71 (???) /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ QD.framework/Versions/A/QD
0x916f0000 - 0x91728fff com.apple.AE 1.4 /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ AE.framework/Versions/A/AE
0x91760000 - 0x917f3fff com.apple.print.framework.PrintCore 3.3 /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ PrintCore.framework/Versions/A/PrintCore
0x9194f000 - 0x9194ffff com.apple.audio.units.AudioUnit 1.3.3 /System/Library/Frameworks/AudioUnit.framework/Versions/A/AudioUnit
0x91970000 - 0x919befff com.apple.print.framework.Print 3.3 /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/Print.framewo rk/Versions/A/Print
0x91a40000 - 0x91ab3fff com.apple.NavigationServices 3.3.3 /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/NavigationSer vices.framework/Versions/A/NavigationServices
0x91afb000 - 0x91b0bfff com.apple.ImageCapture 2.1.5 /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/ImageCapture. framework/Versions/A/ImageCapture
0x91b30000 - 0x91b44fff libCGATS.A.dylib /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ CoreGraphics.framework/Versions/A/Resources/libCGATS.A.dylib
0x91b60000 - 0x91b6bfff libCSync.A.dylib /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ CoreGraphics.framework/Versions/A/Resources/libCSync.A.dylib
0x91ba3000 - 0x91bbdfff libresolv.9.dylib /usr/lib/libresolv.9.dylib
0x91bd0000 - 0x91bdffff libPSRIP.A.dylib /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ CoreGraphics.framework/Versions/A/Resources/libPSRIP.A.dylib
0x91c00000 - 0x91c13fff libRIP.A.dylib /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ CoreGraphics.framework/Versions/A/Resources/libRIP.A.dylib
0x92037000 - 0x92052fff libcurl.2.dylib /usr/lib/libcurl.2.dylib
0x92070000 - 0x92096fff com.apple.FindByContent 1.4 (1.2) /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ FindByContent.framework/Versions/A/FindByContent
0x92170000 - 0x92357fff com.apple.security 2.4 (179) /System/Library/Frameworks/Security.framework/Versions/A/Security
0x927f0000 - 0x92827fff com.apple.CFNetwork 1.2.2 (7) /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/CFNetwo rk.framework/Versions/A/CFNetwork
0x9283f000 - 0x92857fff com.apple.WebServices 1.1.1 (1.1.0) /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/WebServ icesCore.framework/Versions/A/WebServicesCore
0x92880000 - 0x92c05fff com.apple.HIToolbox 1.3.7 (???) /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/HIToolbox.fra mework/Versions/A/HIToolbox
0x92de0000 - 0x92e30fff com.apple.HIServices 1.4.1 (0.0.1d1) /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ HIServices.framework/Versions/A/HIServices
0x92e70000 - 0x9336ffff com.apple.AppKit 6.3.10 (743.42) /System/Library/Frameworks/AppKit.framework/Versions/C/AppKit
0x93680000 - 0x93958fff com.apple.CoreGraphics 1.203.30 (???) /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ CoreGraphics.framework/Versions/A/CoreGraphics
0x939d0000 - 0x939d4fff libmathCommon.A.dylib /usr/lib/system/libmathCommon.A.dylib
0x93a50000 - 0x93a64fff libcups.2.dylib /usr/lib/libcups.2.dylib
0x93a6a000 - 0x93a84fff libPDFRIP.A.dylib /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ CoreGraphics.framework/Versions/A/Resources/libPDFRIP.A.dylib
0x93bec000 - 0x93ca4fff com.apple.audio.toolbox.AudioToolbox 1.3.4 /System/Library/Frameworks/AudioToolbox.framework/Versions/A/AudioToolbox
0x94270000 - 0x94333fff com.apple.DiskImagesFramework 10.3.8 (77) /System/Library/PrivateFrameworks/DiskImages.framework/Versions/A/DiskImages
0x94580000 - 0x9458bfff com.apple.securityhi 1.2 (90) /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/SecurityHI.fr amework/Versions/A/SecurityHI
0x94593000 - 0x9459ffff com.apple.help 1.0.1 /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/Help.framewor k/Versions/A/Help
0x945b0000 - 0x945b9fff libz.1.dylib /usr/lib/libz.1.dylib
0x94650000 - 0x946affff com.apple.SearchKit 1.0.2 /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/SearchK it.framework/Versions/A/SearchKit
0x94720000 - 0x94721fff com.apple.securityfoundation 1.0 (6) /System/Library/Frameworks/SecurityFoundation.framework/Versions/A/SecurityFoun dation
0x94800000 - 0x9488cfff com.apple.ink.framework 101.1.4 (55.12) /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/Ink.framework /Versions/A/Ink
0x94e0b000 - 0x94e1efff com.apple.speech.synthesis.framework 3.2 /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ SpeechSynthesis.framework/Versions/A/SpeechSynthesis
0x95140000 - 0x951b5fff com.apple.DiscRecordingEngine 2.1.17 /System/Library/Frameworks/DiscRecording.framework/Versions/A/Frameworks/DiscRe cordingEngine.framework/Versions/A/DiscRecordingEngine
0x954c0000 - 0x95ac6fff libBLAS.dylib /System/Library/Frameworks/Accelerate.framework/Versions/A/Frameworks/vecLib.fr amework/Versions/A/libBLAS.dylib
0x95b20000 - 0x95df0fff libLAPACK.dylib /System/Library/Frameworks/Accelerate.framework/Versions/A/Frameworks/vecLib.fr amework/Versions/A/libLAPACK.dylib
0x95f00000 - 0x95f20fff libvMisc.dylib /System/Library/Frameworks/Accelerate.framework/Versions/A/Frameworks/vecLib.fr amework/Versions/A/libvMisc.dylib
0x96028000 - 0x960f0fff libcrypto.0.9.7.dylib /usr/lib/libcrypto.0.9.7.dylib
0x968d0000 - 0x969b2fff libicucore.A.dylib /usr/lib/libicucore.A.dylib
0x96a04000 - 0x96a6dfff com.apple.htmlrendering 1.1.2 /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/HTMLRendering .framework/Versions/A/HTMLRendering
0x96aa0000 - 0x96acefff libssl.0.9.7.dylib /usr/lib/libssl.0.9.7.dylib
0x96b50000 - 0x96bdffff ATS /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ ATS.framework/Versions/A/ATS
0x96c00000 - 0x96c67fff com.apple.audio.CoreAudio 2.1.3 /System/Library/Frameworks/CoreAudio.framework/Versions/A/CoreAudio
0x96cb0000 - 0x96d9efff libiconv.2.dylib /usr/lib/libiconv.2.dylib
0x96de0000 - 0x96df0fff com.apple.vecLib 3.0.3 (vecLib 3.0.3) /System/Library/Frameworks/vecLib.framework/Versions/A/vecLib
0x96ee0000 - 0x96ee8fff libbsm.dylib /usr/lib/libbsm.dylib
Maybe you are looking for
-
CallBack from Oracle to a bean
I am using WL5.1 and Oracle 8i. My application demands clients to be refereshed whenever a table in the database is modified. For this, I plan to load Java class inside Oracle 8i wrap it inside a procedure, which will be invoked on the table update.I
-
Is the universal dock compatible with ipod 4th generation
Is the universal dock compatible with ipod 4th generation
-
Does there exist a way to convert the string "1ms" into the number 0.001? Same with the µ (micro), k (kilo), M (mega) and any other metric symbols? I can do this manually no problem but I thought someone may have done this already. Thanks. Unoffic
-
Linking months in Budget?
Hello everybody. Having trouble adding a new month to my budget. How do I connect my budget month to month and everything save and accumulate as the year goes on? Please Help!
-
Changing a select list using javascript
Hi all, yesterday I had a doubt using apex_item.checkbox and how to change them using javascript: Re: Passing a checkbox as a parameter to a javascript function Today, I'm facing a similar problem, but with select lists. Here it goes. I have a report