Integrating ucm with other content servers.

Hi,
Can I integrate oracle ucm with other content servers like Alfresco,Documentum etc.If possible how can i do it?

Hi
Yes , can do it in certain cases like Share Point where UCM has adapter components which would connect to the 3rd party CMS and data transfers can be possible .With Documentum as well I believe that there is an adapter which when installed on UCM / URM one can access to the other CMS.
Do not have any adapters apart from these 2 as far as I know.
Thanks
Srinath

Similar Messages

Can BEA JMS C APIs be used to communicate with other JMS servers?

Hello,
          Can BEA JMS C APIs be used to communicate with other JMS servers?
          If yes, is it enough to download, compile the JMS C APIs, and link the C applications to the libraries (shared or static) produced?
          If not, can you point me to an open source framework that can be used to enable C applications to communicate with JMS servers?
          I have HP-UX server that has both C and Java compilers (Java 1.5).

The JMS C client is a pre-compiled library - we don't supply the source - so C applications link to it. If I recall correctly, there is an HP version. The C client library is actually thin layer that uses JNI to directly invoke a Java JMS client running in an embedded JVM.
          The library might work with other vendor's Java JMS clients, but BEA does not officially support this usage.
          Tom

Labview dashboard with other web servers, like a PLC

Hi
Is it possible to use labview dashboard with other web servers, like a PLC?
Regards,
Vadie
Solved!
Go to Solution.

Vadie,
To have Data Dashboard communicate with a PLC you will need to have a Windows PC or NI RT Target in between the two. I hope this image helps to illustrate this.
Mark
LabVIEW R&D

Integrating BIP with multiple LDAP servers

Hi,
my question is very simple. In Admin->Security Configuration->Security Model section i've setted Security model combobox with LDAP value. Then i've filled all LDAP information field (for example:URL). All works. But in my rpd i 've multiple LDAP servers (multiple URL) and in the form i can insert information about only one LDAP server.
Is it possible configure BIP with multiple LDAP servers?
Thanks
Giancarlo
P.S. I'm using OBIEE 10g

Hi,
my question is very simple. In Admin->Security Configuration->Security Model section i've setted Security model combobox with LDAP value. Then i've filled all LDAP information field (for example:URL). All works. But in my rpd i 've multiple LDAP servers (multiple URL) and in the form i can insert information about only one LDAP server.
Is it possible configure BIP with multiple LDAP servers?
Thanks
Giancarlo
P.S. I'm using OBIEE 10g

Combining selectOneRadio with other content but text?

Hi!
I got a quite simpel task I am currently not able to manage with JSF. I want to combine some Radio-Buttons with content like images or video, simply showing a radiobox in front an image and another and so on.
So in terms of JSF i thought i had to combine selectOneRadio, selectItem and graphicImage tags. But this doens't work. According to api selectOneRadio-Tags can only contain selectItem- or selectItems-tags.
So how can i manage to show some other content behing my radio buttons without writing my own tag? Mus be an eady solution...i hope ;o)
Thanks!

Hi all.
I know this thread is quite old, but does anyone knows (now) if there is a simple solution, or one need to write a custom compoment?
What I need is also a group of radio buttons with an associated image instead of text.
Thanks.

Integrating BPM with WebCenter Content

To integrate UCM and BPM, I followed this tutorial written by J@n van Zoggel.
At the moment, I've already set up everything exactly as instructed in the tutorial. However, when I viewed a task in BPM Workspace, I still cannot see the Attachment section. In the log, I saw the following error:
Ensure that credential store map WF-ADMIN-USER with key WF-ADMIN-CREDENTIAL
contains UCM server admin username/password. Also ensure that Workflow configuration parameter
UcmIdcUrl contains IDC socket connection url to connect to UCM server and UCM server has permission
to let SOA server connect to it using IDC protocol.
access denied ("oracle.security.jps.service.credstore.CredentialAccessPermission" "context=SYSTEM,mapName=WF-ADMIN-USER,keyName=WF-ADMIN-CREDENTIAL" "read")]]
One thing I'd like to ask is that in all tutorials or articles I've read, the authors are always testing in the environment in which both the UCM and BPM servers are on the same machine. In my case, I am trying to connect my local BPM server with the online WebCenter Content server of my company, I wonder if I have to make any additional settings for this to work. A few pictures of my current settings are shown below.
I'd be very grateful if you could share with me your experience in integrating BPM and UCM.
Best regards,
James Tran
P/S: My environment is SOA Suite 11.1.1.7 and WebCenter 11.1.1.7
1. UcmIdcUrl setting:
2. WF-ADMIN-USER key map:
3. WebCenter Content IP Filter:

I don't believe that noone has ever tried to connect the local BPM environment to a remote WCC server before. Please let me know if you've ever experienced the same problem. Otherwise, even a simple "I tried to do the samething and I succeeded using the same steps in the tutorial" would help too .
Another thing is that yesterday, I talked to the tech-lead and I learned that our WCC server environment doesn't have BPM installed yet. I am wondering if this would cause the WCC server to not understand the request from my BPM server. In addtion, I've also upgraded my local BPM server using the lastest SOA bundled patch. Should the same patch be applied to the WCC server environment too?
I'd be very grateful for any advice .

How to integrate KM with other Content Management Systems

Hi all,
The requirement is to integrate KM with third-party Content Management Systems like Documentum, Interwoven, fileNet etc. Related documents/tutorials can also be shared.
Helpful answers will be rewarded for sure.
Thanks in advance.
Regards,
Shankar

Hi
These links may be useful
Need to get a SAP NetWeaver component implemented quickly? Try SAP Best Practices
http://www50.sap.com/company/press/factsheets/solution/ep.asp
http://sap.ittoolbox.com/topics/t.asp?t=421&p=421&h1=421
http://blogs.ittoolbox.com/km/portals/archives/001903.asp
http://www.documentum.com/literature/literature.htm?uq=False&printReady=True
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/documents/a1-8-4/knowledge management in enterprise portal.pdf

How to swap movieclip with other content, in a movieclip loaded external

Hi! I'm getting desperated.
I started about 3 days ago trying to solve this problem,
maybe i'm very noob!
I have a main movie. Inside this, i load various externals
swf's. One swf for a menu, another for a image presentation, etc.
In the menu, i load various instances of another swf file...
a button swf, and witch one has to have a different image as
button.
So inside the button, i have a layer with a button, but no
shape or nothing, and in another layer, i have a movieclip to can
swap by an image.
So, the struct is like this:
Main Movie
. image_presentation
. contact
. menu
. . button1
. . . button
. . . image
. . button2
. . . button
. . . image
. . button3
. . . button
. . . image
. . button4
. . . button
. . . image
So, button is only a swf file, with various instances.
"button" inside the buttons, make the button efect, with a white
border apearing on mouse over button. "image" is a movieclip
created only for change with an image (button 1 = image 1, button 2
= image 2, etc).
How can i do this, controlling the images url's from the main
movie?? I had tried a lot of ways, but i could do it.
Please help.
Thanks.

sorry there but this system seems convoluted and unecessary.
You should be able to achieve nearly any 'effect' using either a
single button instance, or a movieclip instance used as a button,
but should not need multiple instances to do so, or multiple swf
files Each button symbol has three 'states' that you can apply
different 'images' to to achieve an 'effect'. You can even put
movieclips in a button state to animate something during the
triggering of that state. It seems that you should be able to at
least place all of the buttons within the 'menu' in a single swf
(not to mention that they could all be within the main swf) instead
of 'loading' them as individual swf files.
What is it that you're trying to control? the 'images'? what
do you want them to do, and how are you wanting them to be
controled?

Re : Integrating B1 with other applications

Hi All,
I want to connect .Net Applications with SAP B1.My requirement is, i already developed a project in .Net.how to run the developed .net application in B1. I want to run the .exe in B1.How to achieve this requirement.
Thanx in advance
Regards
Mohana

Hi Mohana,
In SAP Business One, you can use File -> Launch Application... to do this.
HTH
Aravind

Integration Essbase with other applications

I am new to Essbase and have read the docs for the AnalyticServices, Administration Services and Integration Services . I am a web application developer and I have a client usingEssbase and apparently has a lot of logic embedded. Theclient was wondering if we can access the Essbase data directly viaa web application? I can not find anywhere in the doc'swhether or not the Essbase Anyaltics data can be access directlyvia JDBC, Web Services or a Java API of some sort. Any adviceto pointers to doc's would be greatly appreciated. 

 For Essbase 7.1.5, you will use the Essbase Deployment Services ("EDS") 7.1.3; it is the container for the Java API and for XML/A (web services interface). If you don't have EDS installed, it is downloadable from the Hyperion Download Center and you don't need a special license to use the EDS component. Once you have installed EDS, look for the docs and samples subdirectories to get started. Tim

Java Card 3 : Exchange Data with Other Web Servers

Hi everyone,
I hope to be happy and healthy.
I want to implement our internet voting protocol with jc3 connected edition. I mean by using NetBeans IDE (JC3 web project). what i need is that use jc3 as web service client but unfortunately jc3 does not support web service ( i test its APIs, but some people say it support restful web service, again i think it does not support restful APIs, too.
I need to have send and receive data over http. for example i want jc3 send a string value to a definite web server( electoral web application) and get response, over http. I have implemented my protocol by socketconnection but i need, send and receive done over http protocol. I use httpconnection ( javax.microedition.io.httpconnection) but i can not do that. I will be grateful if anyone can help me.
Thanks in advance for your help
Edited by: 969084 on Nov 1, 2012 11:38 PM

This may be difficult to do in the real world. I am not aware of any JC3 connected edition hardware commercially available.
Is the intent that each voter will have a smart card that they can use to securely vote? It may be easier to have a host application on the voters computer that uses the smart card as a security token for signing and encrypting and then passing this encrypted data to the voting system with a HTTP connection.
- Shane

JDeveloper BPEL Designer with other BPEL Servers

Can the BPEL XML emitted from JDeveloper designed be successfully executed by servers other than Oracle BPEL Process Manager?

Yes and no. The BPEL process itself is based on the BPEL standard and can be used on any other server. But the BPEL process is packed into a SuiteCase, jar file. This file contains other files like bpel.xml, these is vendor specific. So you can not run a BPEL process designed in JDev into another non Oracle BPEL server, without any changes.

ADF Rich Faces with Spring WebFlow in other application servers

I am evaluating various JSF based UI technologies (Tomahawk, Tobago, Trinidad, RichFaces, IceFaces, ADF Faces) and after having a look at demos came to conclusion that ADF Faces is quite better than rest. But i have a few concerns for ADF Faces:
1. How well it integrates with Spring WebFlow? Does it provide any AJAX handlers for spring (spring provides AJAX handlers for RichFaces out of the box)? If Yes then is there any documentation for that?
2. Can it integrate with other frameworks like RichFaces? If Yes then is there any documentation for that?
3. Can it work with other application servers like JBoss, Websphere, etc? If Yes then is there any documentation for that?

1. How well it integrates with Spring WebFlow? Does it provide any AJAX handlers for spring (spring provides AJAX handlers for RichFaces out of the box? If Yes then is there any documentation for that?
--> Spring Web flow is not supported. No ajax handlers for spring. But you do have built in ajax functionality.
2. Can it integrate with other frameworks like RichFaces? If Yes then is there any documentation for that?
--> Yes can be integrated but not supported hence no documentation.
3. Can it work with other application servers like JBoss, Websphere, etc? If Yes then is there any documentation for that?
--> Technically it can. WebSphere was supported as of ADF 10g. When 11g was released it was supported but now it might be. There are various posts in the forum on tomcat & jboss integration. Though not easy can be achieved.
Another thing to note is ADF Faces is not open source. You get it bundled with Weblogic App server. Where as all other component libraries you mentioned are open source.
Venkat

Integration Of SD With Other Module

Dear All
Plz tell me the integration of Sale & Distribution module with other module and thier impact

The link between SD and MM :-
1. When you create sales order in SD, all the details of the items are copied from Material master of MM.
2. MRP and availibility check related data is also taken from MM although you control this data in SD also.
3. While you create inbound/outbound delivery with reference to a sales order,the shipping point determination takes place with the help of the loading group, plant data, shipping conditions etc. This also refers to Material Master.
4. The material which you are entering in a sales order must be extended to the sales area of your sales order/customer otherwise you cannot transact with this material.
There are many such links between SD and MM.
Now the link between SD and FI :-
1. Whenever you create a delivery with reference to a sales order, goods movement takes place in the bacgground. eg. In case of standard sales order, you create an outbound goods delivery to the customer.
Here movement 601 takes place. This movement is configured in MM. Also, this movement hits some G/L account in FI. Every such movement of good s hits some G/L account.
2. The accounts posting in FI is done with reference to the billing documents (invoice, debit note, credit note etc) created in SD. Thus this is a link between SD and FI
3. Tax determination: In case of a tax determination also, there is a direct link between SD and MM
SD Integration points with other modules
SD module is highly integrated with the other modules in SAP.
Sales Order u2013
Integration Points                      Module
u2022Availability Check             -       MM
u2022Credit Check                   -       FI
u2022Costing                        -       CO/ MM
u2022Tax Determination              -       FI
u2022Transfer of Requirements       -       PP/ MM
Delivery & Goods Issue u2013
Integration Points                      Module
u2022Availability Check             -       MM
u2022Credit Check                   -       FI
u2022Reduces stock                  -       MM
u2022Reduces Inventory $            -       FI/ CO
u2022Requirement Eliminated         -       PP/ MM
Billing -
Integration Points                      Module
u2022Debit A/R                      -       FI/ CO
u2022Credit Revenue                 -       FI/ CO
u2022Updates G/ L                   -       FI/ CO
(Tax, discounts, surcharges, etc.)
u2022Milestone Billing              -       PS
Return Delivery & Credit Memo -
Integration Points                      Module
u2022Increases Inventory            -       MM
u2022Updates G/ L                   -       FI
u2022Credit Memo                    -       FI
u2022Adjustment to A/R              -       FI
u2022Reduces Revenue                -       FI
thanks
G. Lakshmipathi

DMS need to send the same document to multiple content servers

Dear Experts,
We are implemeting DMS with three content servers(A,B,C locations).We have requirement that need document must save on 3 content servers and user can see document from any one of them.
As per understanding while create document ECC system ask which content server need to save,We can select one of content servers.
Kindly give me answers for below questions
- Is there any posibility to select multiple content servers which creating document?
- Is there any posiblity to shared repository for 3 servers?
Please advice on the requirement.
Thanks in advace.
Regards,
Santhosh.

Dear Santhosh...
for this kind of scenario SAP Provide
Content Servers and Cache Servers
Any number of content servers can be installed in different locations. The contents are transferred directly between the client and content server. A cache is used to store copies of documents when they are accessed for the first time. As a result, the documents can be accessed again more quickly, since the contents are taken directly from the cache. Caching, however, must not be confused with replication.
With caching, the original documents are stored in one location, namely on the content server. The copies in the cache can be replaced with newer content at any time.
Follow the link ..it will help you
http://help.sap.com/saphelp_nw04s/helpdata/en/02/804d3ccd6fba74e10000000a114084/frameset.htm
http://help.sap.com/saphelp_nw04s/helpdata/en/7f/fba637fcf7dc39e10000009b38f8cf/frameset.htm
http://help.sap.com/saphelp_nw04s/helpdata/en/21/f36c11389511d5992200508b6b8b11/frameset.htm
for the installation process Content Servers and Cache Servers
follow the link
[SAP Content Server for Windows Installation Guide|http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/cfa73246-0a01-0010-71b4-bc21ccb45c99?quicklink=index&overridelayout=true]
or see this post...
Content Repository & Content Category
Regards
Tushar Dave

Integrating ucm with other content servers.

Similar Messages

Maybe you are looking for