Integrating WebCenter Content with BPM

To integrate UCM and BPM, I followed this tutorial written by J@n van Zoggel.
At the moment, I've already set up everything exactly as instructed in the tutorial. However, when I viewed a task in BPM Workspace, I still cannot view the Attachment section. In the log, I saw the following error:
Ensure that credential store map WF-ADMIN-USER with key WF-ADMIN-CREDENTIAL
contains UCM server admin username/password. Also ensure that Workflow configuration parameter
UcmIdcUrl contains IDC socket connection url to connect to UCM server and UCM server has permission
to let SOA server connect to it using IDC protocol.
access denied ("oracle.security.jps.service.credstore.CredentialAccessPermission" "context=SYSTEM,mapName=WF-ADMIN-USER,keyName=WF-ADMIN-CREDENTIAL" "read")]]
One thing I'd like to ask is that in all tutorials or articles I've read, the authors are always testing in the environment in which both the UCM and BPM servers are on the same machine. In my case, I am trying to connect my local BPM server with the online WebCenter Content server of my company, I wonder if I have to make any additional settings for this to work. A few pictures of my current settings are shown below.
I'd be very grateful if you could share with me your experience in integrating BPM and UCM.
Best regards,
James Tran
P/S: My environment is SOA Suite 11.1.1.7 and WebCenter 11.1.1.7
1. UcmIdcUrl setting:
2. WF-ADMIN-USER key map:
3. WebCenter Content IP Filter:

Hi James,
I have had huge problems applying SOA bundled patches using the Readme.txt files. Mainly as they are supposed to be roll-up patches but some earlier ones state that they need to be applied to WC1 as well as SOA1 but not the later patches. What I do now is apply them to SOA1, WC1, ECM1 and oracle_common at the same time. I am only using a pre-built VM but it seems to solve various issues I have had.
Also recently I had problems with Attachments in Human Tasks so I applied patch p19546426_111176_Generic... I installed into SOA1, oracle_common, ECM1, WC1 (not just SOA1 like the Readme.txt says) and then they started working. This was after many failed attempts following the Readme.txt...
Hope this helps

Similar Messages

Integrating webcenter content with soa webservice

Hi All,
We have been working on Oracle Content Server for the past one year. Currently we have a requirement that we need to integrate webcent content workflows with oracle BPM worklist using webservice Definition Language(WSDL) url. (i.e.) whenever a workflow is triggered, we need to get a corresponding worklist item on bpm worklist without an email getting triggered for the corresponding approvers/reviewers.
Kindly suggest a suitable method to implement the above strategy. Thanks in advance.
Thanks
S. Muthukumaran

Hi James,
I have had huge problems applying SOA bundled patches using the Readme.txt files. Mainly as they are supposed to be roll-up patches but some earlier ones state that they need to be applied to WC1 as well as SOA1 but not the later patches. What I do now is apply them to SOA1, WC1, ECM1 and oracle_common at the same time. I am only using a pre-built VM but it seems to solve various issues I have had.
Also recently I had problems with Attachments in Human Tasks so I applied patch p19546426_111176_Generic... I installed into SOA1, oracle_common, ECM1, WC1 (not just SOA1 like the Readme.txt says) and then they started working. This was after many failed attempts following the Readme.txt...
Hope this helps

Integrating Jasper Reports with BPM Inbox

BPM Dashboard has click able graphics which drill down the Inbox with the filtered results.
Now we are using Jasper Reports for building Dashboard. We want to implement the same type of drill down functionality with Jasper Charts.
Does anyone know how to filter the inbox like BPM Dashboard does ?

More comments...
When clicked on a chart in BPM Dashboard, it makes an AJAX call to get the updated chart information. While getting the chart information the call also updates the filter criteria in a predefined View. This view should have the required Filter criteria defined.
After getting the response from the server.. Dashboard re-directs the parent window to a URL which displays the Filtered results.
Now we are checking on how to make this AJAX call from Jasper report.

WebCenter Content and BPM

Hi,
I have installed UCM and SOA BPM. Now I need to integrate this products.
Can somebody advice me how to do this?
Thanks!

Where can I create, deploy and activate BPEL process? This is more a BPEL (SOA) question than a UCM one. Are you sure that you have everything OK on the BPEL side?
In a nutshell, BPEL processes are best created in JDeveloper (it is a bunch of XMLs, so you could use other means to get them, but JDev will give you much better support, incl. deployment). A process is deployed on BPEL Process Manager (or BPM Engine); a J2EE app running on Weblogic.
UCM just reads what processes are available on BPEL PM. I'm just studying the matter in a bit deeper way, so it seems that a process must have a certain properties set to be recognized (see here: Re: UCM 11G and SOA 11G ). And, of course, the connection between UCM and BPEL PM (or SOA server) must be set first - I'm currently struggling with this one as ports to be read seemed to be filtered off, and I'm unable to connect to the server. That's why I'd recommend to narrow down the problem first.

Integrate WebCenter custom with BPM Worklist

Hi,
We are developing WebCenter custom portal application and we have a requirement where in we have to pull BPM Worklist from BPM. Is it possible to integrate custom WebCenter to BPM Worklist? If yes, please advise and please provide any pointers. Thanks!
Regards,
Suneel Jakka

i got confused, are you trying to integrate BPM worklist into webcenter portal application? if so here is the good articale about the same,
https://blogs.oracle.com/webcenterportal/entry/oracle_bpm_suite_oracle_webcenter

Integrating webcenter spaces with Micosoft Client SSO

Hi All,
I have configured the webcenter to use an external Identity store (In my case an Active Directory). I followed the documentation as mentioned in : http://download.oracle.com/docs/cd/E12839_01/webcenter.1111/e12405/wcadm_security.htm#BGBHHGEH and I am now able to login to the webcenter using the username / password from the Active Directory.
Now, I am trying to integrate a Seamless Microsoft Client SSO for the same. I followed the documentation http://download.oracle.com/docs/cd/E12839_01/webcenter.1111/e12405/wcadm_security.htm#BGBCFDJI and created a "NegotiateIdentityAsserter" and made this asserter as the highest in the order. my providers are now int he following order:
1. NegotiateIDAsserter
2. ADProvider (SUFFICIENT) : This is my AD Authenticator provider
3. DefaultAuthenticator (SUFFICIENT)
4. DefaultIdentityAsserter
I have now configured such that the Public user does not have 'view' access as per the above document as well.
Now, when i try to hit http://<machinename>:8888/webcenter , I still get the Login page (not the same as the one where I have public user view enabled though). But seamless authentication is not happening. In the debug log file, i see the following:
[2009-12-09T17:42:12.511+05:30] [WLS_Spaces] [NOTIFICATION] [] [oracle.webcenter.webcenterapp.internal.view.webapp] [tid: [ACTIVE].ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: anonymous] [ecid: 0000ILnMct63V8JpQkx0id1B7si000000Q,0] [APP: webcenter] Request-response cycle complete for Spaces request #Request URL =
From the Login page, if i provide the username and password of the Active directory user, I am able to login. Can anyone please suggest what could be wrong here?
Thanks,
Diwakar

Did you setup weblogic as per this doc? - http://download.oracle.com/docs/cd/E17904_01/webcenter.1111/e12405/wcadm_security_sso.htm#WCADM8175

Integrating Webcenter 11g (Discussions) with OAM for SSO

Hi,
I need some help in integrating Webcenter 11g with OAM 10g.
Objective:
=========
My customer is using Webcenter 11.1.1.2.0 and they are primarily using Discussions and wiki .I would like to integrate OAM with Webcenter for providing SSO.
Steps Followed:
============
I have followed the steps mentioned in the section 23.7.1 and 23.7.1.7 in the doc
http://download.oracle.com/docs/cd/E15523_01/webcenter.1111/e12405/wcadm_security.htm#BGBCEHGE
and also referred metalink note ID 829122.1
Scenario after integrating with OAM:
===========================
1.Accessed the dicussions url through OHS proxy http://<ohs_host>:<ohs_proxy>/owc_discussions
2.Click on Login button
3.OAM Login page appears
4.Provide credentials for orcladmin (admin user of OAM OID LDAP)
5.Discussions default login screen appears ( I dont expect this default login page,as I have already authenticated with OAM)
6.Provide orcladmin credentials
7.Login screen is keep on popping and not able to login
if i set owc_discussions.sso.mode=false,then looping (Step 7) is not occuring and could able to login.
Am I doing anything wrong here? Or is there a way I can make it work.
Thanks in Advance.

Did you setup weblogic as per this doc? - http://download.oracle.com/docs/cd/E17904_01/webcenter.1111/e12405/wcadm_security_sso.htm#WCADM8175

Issues integrating WebCenter with Oracle Access Manager

Hi All,
I am trying to integrate WebCenter 10.1.3.2 with Oracle Access Manager (CoreId). Followed the steps described in the Chapter 11 of the OC4J Security Guide.
I was able to successfully authenticate WebCenter using IWA with Access Manager.
Then I proceeded with the below steps:
- Implemented ADF Security in the application. Created application roles and login page and worked fine on my local machine.
- Provide the auth-method of "COREIDSSO" in orion-application.xml
- Renamed the app-jazn-data.xml to give the OID groups
- Mapped the OID groups to application roles in orion-application.xml
- Used the jazn migration tool to populate the system-jazn-data.xml
When trying to access the application, it looks like the ADF Context identifies that this is an authenticated user.
ADFContext.getCurrent().getSecurityContext().isAuthenticated() retruns true
ADFContext.getCurrent().getSecurityContext().isAuthorizationEnabled() returns true
I get the below error message on the server console:
[CoreIDLoginModule::getUserSessionFromCookie]: This user session for F3iwZhUGgjej9RSrMLSo0wjH5Ec6c2oeC0OBRH12y7%2FvfPVncz6dYoBoFD6q8DWAlMtzah%2FYV4T1t7jztVFYbxwfOyu0VOMXMEIosRrFicfJwoPRrM8MOkFsziQxpUqo98XrC9iBRHffdWSItNHZRZK4ZoCJMi6HZZ6noOc4Z%2BGJDGj3kWndYHTWjiG0cJhkSbL95wMmrXCDElzZHjPMdkuNQUHW1TfAJvgSlDeX6hhhIThlc%2BGmxMP3MQ%2FZoxUysbKieIJgDXo1%2FEMmLmTVjA%3D%3D is not valid or user is not logged in.
I also tried using the "Headervar" variable to display the obmygroups value, but it comes as blank.
Any help would be appreciated.
Thanks
Aneesh

We recently integrated Webcenter Application (with ADF Authentication and Authorization) with OAM. May be the following will be of some help to you.
We did the following steps documented in Chapter 11 Oracle Access Manager in Oracle J2EE security guide.
OAM
1. Created ALL specified policies , authentication schemes, protection specified in OAM section of the document.
OC4J
1. Ran all configuration listed for the OC4J section.
Webcenter
1. Developed the Webcenter Application
2. Enabled ADF Security (Authentication & Authorization)
3. Deployed the application. While deploying chose File based provider.
4. After the deployment, changed orion-application.xml to have COREIDSSO as documented in Oracle documentation
system-jazn-data.xml
1. Added login module details as specified in the document. (Changed only the application name. Rest all was same as we used names as specified in the earlier steps of the document)
OID Migration
Reference document: "Configuring a WebCenter Application to Use Oracle Access Manager" in Webcenter Framework Developer guide.
1. Located app-jazn-data.xml in the deployed application
2. Removed "realm-name" and "type" subelements of "grantee" tags. Removed any realm details in user name.
3. changed references to "class oracle.security.jazn.spi.xml.XMLRealmRole" to "oracle.security.jazn.realm.CoreIDPrincipal"
4. ran the JAZN migration tool with "all" options. Migration from app-jazn-data.xml to OID.
OAM
Created policies for protecting our application.
Test the application.
Debugging.
1. Enable oracle.adf.share.security , oracle.j2ee.security & oracle.j2ee.security.oc4j loggers to debug if the application is not working the way you expect to work.
2. Set log level in Enterprise manager.
3. All logging information are written in log.xml in $ORACLE_HOME/j2ee/OC4J_Webcenter/log/OC4J_WebCenter_default_group_1/oc4j
Thanks

How to integrate Webcenter content to HRMS

Hi,
we have a new requirement that we need to integrate webcenter content to HRMS. unfortunate we did not get any documentation when searched on Google.
Can anybody provide proper documentation link to integration between Webcenter content to HRMS.
Please provide any reference documentation.
Thanks in advance.

hi,
how to setup and configure for webcenter content with Oracle PeopleSoft integration via with managed attachments.
what are DB tables needs to create. how to configure these setup with PeopleSoft.
Please provide any documentation or reference documents.
Thanks in advance.

Webcenter Content and OSB

Hi,
Can anyone let me know how we can integrate the Webcenter content with OSB. We want to create users but through OSB. Do Webcenter provide any Web service?
Thanks in advance.

a) WebCenter Content has its standard services - see http://docs.oracle.com/cd/E23943_01/doc.1111/e11011/toc.htm
b) the most common services are exposed in WSDL as Web Services - see http://docs.oracle.com/cd/E23943_01/doc.1111/e10807/c25_wsdl_and_soap.htm#BEHDIABD
c) for the remainder (even for your own custom services) you may use WSDL Generator to expose them
d) since the version 11g, WCC does not hold its own identity pool, but rather takes it from one used by the Weblogic domain (usually, an external LDAP), so if you are interested in creation of users you might want to integrate with this LDAP, rather than with WCC

Opening the weblocation url of a content with servlet

Hi All,
I tried opening the weblocation url of a webcenter content with a servlet using URL class, but i am getting Gateway timeout(504). But with other urls, the servlet is working fine.
i.e. if i use datacontrol for fetching the content from ucm and if i open the document with the same servlet passing filename and corresponding url as parameters it is opening fine, but if i use RIDC api to get the url and passing the parameters to servlet, the servlet is not working fine
May i know how to open the weblocation url of an ucm content with open/save dialog?
Thanks
S. Muthukumaran

Can you describe what you are trying to achieve? (in plain, not technical language) There might be other means to do the same.
My guess is that it is more a timeout issue - see http://www.checkupdown.com/status/E504.html , but I'm really just guessing.
This server did not receive a timely response from an upstream server it accessed to deal with your HTTP request.

Integrating BPM with WebCenter Content

To integrate UCM and BPM, I followed this tutorial written by J@n van Zoggel.
At the moment, I've already set up everything exactly as instructed in the tutorial. However, when I viewed a task in BPM Workspace, I still cannot see the Attachment section. In the log, I saw the following error:
Ensure that credential store map WF-ADMIN-USER with key WF-ADMIN-CREDENTIAL
contains UCM server admin username/password. Also ensure that Workflow configuration parameter
UcmIdcUrl contains IDC socket connection url to connect to UCM server and UCM server has permission
to let SOA server connect to it using IDC protocol.
access denied ("oracle.security.jps.service.credstore.CredentialAccessPermission" "context=SYSTEM,mapName=WF-ADMIN-USER,keyName=WF-ADMIN-CREDENTIAL" "read")]]
One thing I'd like to ask is that in all tutorials or articles I've read, the authors are always testing in the environment in which both the UCM and BPM servers are on the same machine. In my case, I am trying to connect my local BPM server with the online WebCenter Content server of my company, I wonder if I have to make any additional settings for this to work. A few pictures of my current settings are shown below.
I'd be very grateful if you could share with me your experience in integrating BPM and UCM.
Best regards,
James Tran
P/S: My environment is SOA Suite 11.1.1.7 and WebCenter 11.1.1.7
1. UcmIdcUrl setting:
2. WF-ADMIN-USER key map:
3. WebCenter Content IP Filter:

I don't believe that noone has ever tried to connect the local BPM environment to a remote WCC server before. Please let me know if you've ever experienced the same problem. Otherwise, even a simple "I tried to do the samething and I succeeded using the same steps in the tutorial" would help too .
Another thing is that yesterday, I talked to the tech-lead and I learned that our WCC server environment doesn't have BPM installed yet. I am wondering if this would cause the WCC server to not understand the request from my BPM server. In addtion, I've also upgraded my local BPM server using the lastest SOA bundled patch. Should the same patch be applied to the WCC server environment too?
I'd be very grateful for any advice .

Webcenter Content integration with 11i iStore

Hi,
Does the Webcenter content management integrate with 11i iStore module?
Can anyone point me to some documents explaining the same?
Regards

Hi Ravinder ,
Use the following url to get configdefault.xml file :
http://hostname:<port no>/<httpwebrelativeroot>/idcplg?IdcService=SES_CRAWLER_DOWNLOAD_CONFIG&source=<name of source for SES>
Save the file to a local location and then move it to the SES Feed location .
Then do the crawling for Contents from UCM , then schedule run from SES and the UCM contents will be searchable from SES end .
Thanks
Srinath

Integration of OBIEE Dash Boards with BPM Process

Hi ,
Could you please help me in integrating OBIEE Dash Boards with BPM . I thought of using 2 ways :
1) Integrating OBIEE with ADF First and then Integrating ADF with BPM . Its a long process but any other way if any one can help me .
2) Integrating OBIEE with BPM directly by generating webservices . but i couldnt get any options to generate the webservices for OBIEE .
Can anyone please guide me on this .
Thank you,
Sashank P.

Check these links may help you.
http://docs.oracle.com/cd/E21764_01/bi.1111/e16364/actions.htm
http://gerardnico.com/wiki/ide/eclipse/eclipse_how_to_consume_a_webservice_with_wtp#the_result
http://gerardnico.com/wiki/dat/obiee/web_service

OCR with WebCenter Content and Imaging

Hi,
I'm searching for some information about OCR with webcenter content and imaging.
I've seen that there are two solutions :
- WebCenter Capture
- Webcenter Forms Recognition
But I can't find if any of that product use lexical post-correction of OCR results. Is anyone have this information?
Thanks,
David

David:
Both products will use print (vs handwritten) character recognition to identify "tokens" from the image of a document with text. Capture usage focuses mainly on zonal recognition of information - what I would call structured forms processing. Forms Recognition is for information capture from semi-structured documents - say invoices, where you know that many fields are present, but their location differs from example to example. It can use patterns, text locators, etc to find the field. Both benenfit when there exists a reference DB of acceptable values, but that is not a requirement.
Lexical correction (as I understand it to mean) is not a feature of either. They are not going to try to validate extracted tokens based upon language analysis. I would try to use them to extract all of the tokens and then add some tool to do lexical analysis. You could do that as a separate, post OCR process, or try to see if you can fit it into an FR post-extraction EP.
Might I ask what the business problem you are trying to solve is?
Bernard

Integrating WebCenter Content with BPM

Similar Messages

Maybe you are looking for