Integration between APO and CRM Trade Promotions Mgmt

I'm looking for a clear description of how to integrate APO and CRM Trade Promotions Management.
Can anyone advise, please?

Hi Group APO,
You can follow the below link
http://help.sap.com/saphelp_scm70/helpdata/EN/45/80dd3f92c4f306e10000000a1550b0/frameset.htm
Also Check SAP note 596261 which will surely helps you
Regards
R. Senthil Mareeswaran.

Similar Messages

  • Very Very Urgent Please help me  Integration between OIM and Siebel CRM

    1.The system is proprietary of nature and hence not out of the box provisioning agents exist to integrate the system.
    Integration options for COPS(Customer Organisation Profiling System) ) is a proprietary CRM system holding contact, billing and other profile information as the authoritative source on customers;
    I need complete solution.Please help me its very very urgent.

    As mentioned in your Subject, if it is integration between OIM and Siebel CRM, we have an OOTB connector available for it. Even if your application is similar to Siebel CRM, you can refer the OOTB Siebel connector and do some reverse engineering on it to make a similar one..
    Hope it helps.. otherwise .. all the best and go ahead with writing a new connector and share your exp with the other forum members.
    cheers

  • Int between SCM and CRM

    Hello SAP experts !!
    I have been requested by my client to look at the integration between SCM ( APO) and CRM 7. I have looked at the SAP help files and I am familiar with CRM - however the information is not enough for me to perform a proto type that client will accept going forward
    Can you assist?
    Raj

    Hi
    The integration between SCM (APO) and CRM is mainly for AVALABILITY CHECK and AVAILABILITY with ALLOCATION scenarios. (ATP against allocation)
    This SAP Note -719627 will be useful.
    Regards

  • Communication between ECC and CRM

    Hello,
    I am in phase of showing communication between SAP CRM 5.0 and ECC 6.0.
    I am struggling with finding some simple transactions which are common in both, with which I can show correct connectivity between ECC and CRM.
       I need to save some data from CRM and access the same via transaction within ECC, save some data via ECC and access it via CRM. I already established RFC link between ECC and CRM.
    Probably communication between SD module of ECC with CRM.
    Can you please help me out with this, a clue/correct direction will be of very helpful. Basically I want to know, what transaction I can use for same.
    Any help is really appreciated.
    Thanks
    -Vishal

    Hi Glenn,
          I followed all steps in document mentioned above. In the end during execution of transaction I selected appropriate source and destination, when I click start transfer objects, it gets stuck in waiting phase.
    Among those steps I was not able to perform step#10. Creating Subscriptions for OLTP. My ERP is not displaying this option under subscription wizard. Should it be reason for not starting transfer ? I also do not see ERP logon screen when I select transfer.
    My another question is when transfer will complete, where I'll be able to see transferred objects within ERP database ?
    Thanks
    -Vishal

  • SNP planned order availability date difference between APO and ECC

    Hi,
    I have observed that SNP Planned order availability date is not matching between APO and ECC. Details are as follows.
    I ran SNP Optimizer with bucket offset of 0.5. After publishing the optimizer created planned orders to ECC, only start date is matching.
    Example:
    I am using PDS as a source of supply.
    Fixed production activity in SNP PDS is 1 day.
    GR processing time: 3 day
    After running optimizer planned order is created with dates explained below.
    Start date/time: 09.05.2011 00:00:00
    End date/time: 12.05.2011 23:59:59
    Availability date: 16.05.2011 00:00:00
    Because of bucket offset defined as 0.5 optimizer planned order availability is start of next monday.
    After publishing this planned order to ECC dates on the planned order is as follows.
    Start date: 09.05.2011
    End date: 09.05.2011
    Availability date: 12.05.2011
    I have not maintained any scheduling margin key in ECC. Also if I dont define the GR processing time, planned dates between APO and ECC always match. Can anyone explain the impact of GR time on the availability date.
    Regards,
    Venkat

    Hi Venkadesh,
    What's "state stamp"? Do you mean different time zone?
    note : 645597  mentioned by Nandha is very helpful:
    In standard, CCR will use duedate - "the available date of the output product".
    Nandha's words "In SAP APO, if the receipt date of the primary product deviates from the
    end date of the last activity of the order, the receipt date
    always identifies this as inconsistent. You cannot rectify
    inconsistencies of this type by using CCR."
    I guess in your PDS or PPM, the output product is not assigned to the End of the last activity. Someone changed it?
    Please CIF the PDS or PPM again.
    If you really want to apply a note, please use note 815509 as you're using planned order,
    and system will use order end  date in CCR instead.
    GR time is always considered. BR/Tiemin

  • Is it a Bug? Integration between Dreamweaver and Fireworks is broken in somewhere?

    I can not upload images related my topic here but you can see
    it in the same topic at
    http://www.fireworksguruforum.com/index.php?showtopic=14282
    I use CS3 Suite. It is a big trouble for me in working on
    real pages. Integration is broken in somewhere else and after that
    point it becomes impossible to work on Fireworks through
    Dreamweaver.
    I've made test to show this trouble and I narrowed the
    problem to the pictures as shown in the figures below,
    1) In figure one I am creating a completely new Fireworks
    file as arrow.png with two frames and one slice in it. After I am
    saving it as .png I am exporting it as .html with images in /images
    subfolder.
    2) After saving and closing the file in Fireworks, in figure
    two, I am opening the html in Dreamweaver and changing the page
    properties by writing zeros to page margins and by changing the
    default font.
    -----I guess in this point something happens which breaks the
    integration between FW and DW--------because;
    3) In figure three I am opening the .png through Dreamweaver
    (by "Edit") and changes the place and size of the slice a little
    bit
    4) When I press Done in Fireworks I see this picture in
    figure four in Dreamweaver which shows integration between FW and
    DW about table structure is broken. (In this point if I add any
    behaviur to the slice DW doesn't recognize it, or any other change
    in FW can not be recognized by DW)
    5) In order to show this broken integration in table
    sturucture, I am putting a new slice to png when Editing from DW in
    FW.
    6) When I click on Done in DW I see this picture on the
    figure six. Beacuse FW doesn't have any effect on html's table
    structure code.
    I can not upload images related my topic here but you can see
    it in the same topic at
    http://www.fireworksguruforum.com/index.php?showtopic=14282

    damlays wrote:
    > I can not upload images related my topic here but you
    can see it in the same
    > topic at
    >
    http://www.fireworksguruforum.com/index.php?showtopic=14282
    >
    >
    > I use CS3 Suite. It is a big trouble for me in working
    on real pages.
    > Integration is broken in somewhere else and after that
    point it becomes
    > impossible to work on Fireworks through Dreamweaver.
    >
    > I've made test to show this trouble and I narrowed the
    problem to the pictures
    > as shown in the figures below,
    >
    > 1) In figure one I am creating a completely new
    Fireworks file as arrow.png
    > with two frames and one slice in it. After I am saving
    it as .png I am
    > exporting it as .html with images in /images subfolder.
    >
    > 2) After saving and closing the file in Fireworks, in
    figure two, I am opening
    > the html in Dreamweaver and changing the page properties
    by writing zeros to
    > page margins and by changing the default font.
    >
    > -----I guess in this point something happens which
    breaks the integration
    > between FW and DW--------because;
    >
    > 3) In figure three I am opening the .png through
    Dreamweaver (by "Edit") and
    > changes the place and size of the slice a little bit
    >
    > 4) When I press Done in Fireworks I see this picture in
    figure four in
    > Dreamweaver which shows integration between FW and DW
    about table structure is
    > broken. (In this point if I add any behaviur to the
    slice DW doesn't recognize
    > it, or any other change in FW can not be recognized by
    DW)
    >
    > 5) In order to show this broken integration in table
    sturucture, I am putting
    > a new slice to png when Editing from DW in FW.
    >
    > 6) When I click on Done in DW I see this picture on the
    figure six. Beacuse FW
    > doesn't have any effect on html's table structure code.
    >
    >
    > I can not upload images related my topic here but you
    can see it in the same
    > topic at
    >
    http://www.fireworksguruforum.com/index.php?showtopic=14282
    >
    >
    >
    I can reproduce your results, but I don't consider this a
    bug; just a
    limitation of Roundtrip editing.
    You can't add or change slices without re-exporting the html
    from
    Fireworks. Roundtrip is for image editing, not for altering
    the table
    structure. If I edit, and re-export, my table remains intact.
    If you want to edit the slices and resulting html, open the
    PNG file
    independently of Dreamweaver, change your slices and images
    and then
    choose File > Update HTML (this option is not available
    when in
    Roundtrip mode). FW will ask you to locate the html file.
    When located,
    you will have the options of
    Replace Images and Their HTML - replaces the previous
    Fireworks HTML.
    Update Images Only - overwrites only the images.
    As an aside, the rigid table created by FW is rarely
    desirable for a
    production web site.
    HTH
    Jim Babbage - .:Community MX:. & .:Adobe Community
    Expert:.
    http://www.communityMX.com/
    CommunityMX - Free Resources:
    http://www.communitymx.com/free.cfm
    .:Adobe Community Expert for Fireworks:.
    Adobe Community Expert
    http://tinyurl.com/2a7dyp
    .:Author:.
    Lynda.com -
    http://movielibrary.lynda.com/authors/author/?aid=188
    Peachpit Press -
    http://www.peachpit.com/authors/bio.aspx?a=d98ed798-5ef0-45a8-a70d-4b35fa14c9a4
    Layers Magazine -
    http://www.layersmagazine.com/author/jim-babbage

  • Can any one send procedure for integration between XI and Geographic inform

    can any one send procedure for integration between XI and Geographic information System(GIS).
    Please clarify ASAP..
    Thanks

    Hi,
    Please see the below links
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/d53af8ca-0801-0010-08b0-dce9e02130a8
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/d53af8ca-0801-0010-08b0-dce9e02130a8
    GIS VS XI
    Regards
    Chilla..
    Points rewarded if it is usefull..<i></i>

  • Business Process & Integration between FI and CML

    Hi,
    Could you please brief about Business Process & Integration between FI and CML.
    Thanks in advance
    Prabhakar

    Any Inputs please for CML

  • Integration between Hr and SD

    hai sap family memebers,
    Can anybody lit me the integration between hr and sd
    as per as my knowledge
    xd02--> we can integrate hr an sd
    if any thing new plz let me know
    all the best
    madhu

    Hi Madhu,
    I think Integration will also happen through Infotype 0900 (Sales Data).
    Here we will assign Employee to Sales Organization, Sales Office and Sales Group
    Thanks
    Uday

  • About integration between SAP and non-SAP applications via javaidoc classes

    Hi,All
    Now we are implementing a SAP-Retail project,we encounter a problem of integration between SAP and non-SAP applications(POS),we want to set Inbound/Outbound between SAP and POS applications realtimely,POS can connect to the SAP system via VPN,weather it can be implemented?
    I conceive to implement it with SAP Java Connector IDoc Class,I don't know weather it is the best solution?If not,please give some other proposal.
    I have download the classes from SAP website and try it with the samples provided by SAP(JCoIDocSample1.java/JCoIDocSample3.java),In my testing,Inbound is succeed,but,in SAP-Retail IS,standard Outbound message type is defined via file port,some one told me that SAP Java Connector IDoc Class can only receive idocs from tRFC port?is it true?If not,please tell me how to deploy in SAP so java program can receive idocs from file port?

    We too are interested in finding information on integration between SAP and Intergraph.  Were you able to obtain information and I was wondering if could share this with us.
    Thanks,
    Sue
    City of Edmonton

  • Session variable filters in the integration between OBIEE and webcenter

    Hello All,
    I have a customer with the requirement to make sure that reports created in answers and containing sessions variables in filters definition will be correctly filtered once called from webcenter.
    So if an OBI report is diplayed in webcenter and contains the same type of filters (based on session variable), will the results be filtered based on the specified variable?
    In other words can we use session variables in the integration between OBIEE and webcenter?
    Thanks Olayinka

    Have you follow all the steps written here :
    http://download.oracle.com/docs/cd/E10415_01/doc/bi.1013/e12188/T421739T475591.htm#T480640
    Do you have create the groups ?
    Do you connect as a member of the group XMLP_ADMIN ?
    Cheers
    Nico

  • Custom Integration between CLM and SRM

    Hi
    Can any body help me how to do custom integration between CLM 2.0 and SRM for contracts using PI. On SRM side we have customised API. More specifically I need what is to be done in PI for custom integration between CLM and SRM.
    Thanks in Advance
    M G REDDY

    Hi There,
    Has anybody managed to custom integrate CLM & SRM?
    If so please kindly share how this was achieved.
    Thanks,
    Sheena

  • Optimize the performance of the RFC call between ECC and CRM

    Hi,
    We are planning to extract sales orders, sales activites and service orders to dispaly it on the  PDF factsheet of the account.
    As of now, the PDF factsheet takes a long time to retrieve the data from ECC to CRM. Can you please suggest us on ways to  optimize the performance of the RFC call between ECC and CRM.
    Thanks in advance,
    Vamsi.

    Hello,
    [SAP Note 636906 |https://service.sap.com/sap/support/notes/636906]is quite useful here.
    Many times, the performance is poor due to function module CRM_CCKPT_EXPORTSUMMARY. This function module gets the customer number, the sales organization and the fact sheet view. If in CRM customizing, you use complete view (001), then all the views in ERP including all the info blocks will be retrieved, which will cause performance issue.
    To solve the issue, please use a limited view to retrieve the data from ERP - especially a view, which does not contain info block 013.
    Hope it helps
    Joaquin

  • Integration between Finance and service management

    Hi,
    Does anybody know integration between Finance and Service management? If you have any documentation please send to [email protected] It is urgent!! Please help me I will reward you with points.
    Thanks,
    Neeli

    Hello
    Check this link.
    http://help.sap.com/erp2005_ehp_02/helpdata/en/3c/05ce40c3e10366e10000000a1550b0/frameset.htm
    Reg
    *assign points if useful

  • Integration between SAP and third party tax software

    can some body explain me or provide me docs regarding integration between sap and third party tax software like vertex.
    Thanks

    Hi
    First configure the same via the following menu path:
    1.) IMG>Financial accounting>Financial accounting global settings>Taxes on sales/purchases>Basic settings>External tax calculation>Define physical destination
    2.) Then test connection (option is available there).
    3.) If the connection is successful, also verify that the external tax package installed supports the R/3 4.6 version of the API. You do that by going to:
    System Information>Function List
    Check if the following functions are listed:
    • RFC_CALCULATE_TAXES_DOC
    • RFC_UPDATE_TAXES_DOC
    • RFC_FORCE_TAXES_DOC
    • RFC_DETERMINE_JURISDICTION
    4.) Then test the tax data retrieval:
    From SE37, select the relevant function modules like RFC_DETERMINE_JURISDICTION.
    The above 4 steps are necessary to satisfy that the RFC connection is established
    Hope useful
    S Jayaram

Maybe you are looking for