Integration between Ariba and SAP R/3 4.7
Hi All,
Have anyone implementing the integration between Ariba Software and SAP R/3 4.7?
In my project has using Ariba TIBCO and SAP Adapter as the integration tool that connect to SAP R/3 4.7 Non-Unicode system (using MDM for Thai language).
I found that when I pull data from SAP through Ariba TIBCO and SAP Adater, the Thai character showed as unreadable character like a garbage character.
Please help me.
Thanks
Hi Bimal,
Please go through this document which contains end to end steps to integrate R/3 HR with CRM
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/84dd0c97-0901-0010-4ab2-9849fba57e31
Best Regards,
Pratik Patel
<b>Reward with Points!</b>
Similar Messages
-
Process of Integration between QTP and SAP
we are in process of integrating QTP with SAP for test scenarios
how to install QTP and SAP and their connections .
Request you all to share your experience and knowledge in this. It will be really helpful.
Thanks
Rajesh BurraNot answered
-
What is the difference between ERP2004 and SAP 47 Enterprise?
Currently we have SAP 47 Enterprise with WAS 6.2. I understand ERP2004 is NW and 6.4 sp9. Can any one please let me know the major difference between ERP2004 and SAP 4.7 Enterprise ( more from abap / workflow view)?
Thanks
SwamyFrom Abap point of view some of the major add-on in erp2004,netwever :
1) Development of webdynpro studio for java development for portal and iviews.
2) Major abap development uses <b>Abap object oriented</b> methodology, rathet hten old conventional Abap,i.e MVC model (Model,View,Controller) where in it uses concept of classes,interfaces,etc.
3) Advanced BSP tech using MVC model to develop web based modules
4) It is closesly integrated with web-based CRM and BW/APO -
Can any one send procedure for integration between XI and Geographic inform
can any one send procedure for integration between XI and Geographic information System(GIS).
Please clarify ASAP..
ThanksHi,
Please see the below links
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/d53af8ca-0801-0010-08b0-dce9e02130a8
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/d53af8ca-0801-0010-08b0-dce9e02130a8
GIS VS XI
Regards
Chilla..
Points rewarded if it is usefull..<i></i> -
How does the integration between CRM and SD occur
How does the integration between CRM and SD occur? Is only via ALE and are there config steps in CRM to ensure the correct data mapping between CRM and SD?
So, if I create an order or quote in CRM how is it then created in SD? Or do they share the same data store.
thanksHi John,
Here is good documentation regarding Data Exchange for Sales Transactions: the CRM Enterprise and the ERP System are two different repositories, If you create the Sales Order in CRM then they will be replicated into SD (using CRM Middleware, BDoc's)
http://help.sap.com/saphelp_crm60/helpdata/en/52/2d0c38941e5666e10000009b38f8cf/frameset.htm
Also you can check the best practice guide for CRM 2007 there you have plenty of information
http://help.sap.com/bp_crmv12007/CRM_DE/HTML/index.htm
Hope this help,
Regards,
Ramon -
hai sap family memebers,
Can anybody lit me the integration between hr and sd
as per as my knowledge
xd02--> we can integrate hr an sd
if any thing new plz let me know
all the best
madhuHi Madhu,
I think Integration will also happen through Infotype 0900 (Sales Data).
Here we will assign Employee to Sales Organization, Sales Office and Sales Group
Thanks
Uday -
Integration between Finance and service management
Hi,
Does anybody know integration between Finance and Service management? If you have any documentation please send to [email protected] It is urgent!! Please help me I will reward you with points.
Thanks,
NeeliHello
Check this link.
http://help.sap.com/erp2005_ehp_02/helpdata/en/3c/05ce40c3e10366e10000000a1550b0/frameset.htm
Reg
*assign points if useful -
About integration between hr and mm
hai sap friends,
As per my knowledge integration between Hr and mm
the transaction code is "oowiz5" and "oomm"
that means if Training and Event management is implemented, integration happens otherwise
In any way any scenaio plz
thanks in advance
madhuApart from Travel MMis integrated with Time Management
Valuating work performed by external employees, and monitoring them in Purchasing -
Integration between CRM and PM
I am working on a utility project for the very first time and I don't really understand the integration between CRM and PM.
Can somebody please provide me some documentation with it?
I am trying to understand how a service order that arises out of CRM goes to PM..does it go?
I need the help urgently
Cheers
VidyaDear Konda Reddy,
Visit the following link:
http://help.sap.com/saphelp_crm50/helpdata/en/4f/81bfc33e624f148710800b04971033/content.htm
Regards,
Naveen. -
Is it a Bug? Integration between Dreamweaver and Fireworks is broken in somewhere?
I can not upload images related my topic here but you can see
it in the same topic at
http://www.fireworksguruforum.com/index.php?showtopic=14282
I use CS3 Suite. It is a big trouble for me in working on
real pages. Integration is broken in somewhere else and after that
point it becomes impossible to work on Fireworks through
Dreamweaver.
I've made test to show this trouble and I narrowed the
problem to the pictures as shown in the figures below,
1) In figure one I am creating a completely new Fireworks
file as arrow.png with two frames and one slice in it. After I am
saving it as .png I am exporting it as .html with images in /images
subfolder.
2) After saving and closing the file in Fireworks, in figure
two, I am opening the html in Dreamweaver and changing the page
properties by writing zeros to page margins and by changing the
default font.
-----I guess in this point something happens which breaks the
integration between FW and DW--------because;
3) In figure three I am opening the .png through Dreamweaver
(by "Edit") and changes the place and size of the slice a little
bit
4) When I press Done in Fireworks I see this picture in
figure four in Dreamweaver which shows integration between FW and
DW about table structure is broken. (In this point if I add any
behaviur to the slice DW doesn't recognize it, or any other change
in FW can not be recognized by DW)
5) In order to show this broken integration in table
sturucture, I am putting a new slice to png when Editing from DW in
FW.
6) When I click on Done in DW I see this picture on the
figure six. Beacuse FW doesn't have any effect on html's table
structure code.
I can not upload images related my topic here but you can see
it in the same topic at
http://www.fireworksguruforum.com/index.php?showtopic=14282damlays wrote:
> I can not upload images related my topic here but you
can see it in the same
> topic at
>
http://www.fireworksguruforum.com/index.php?showtopic=14282
>
>
> I use CS3 Suite. It is a big trouble for me in working
on real pages.
> Integration is broken in somewhere else and after that
point it becomes
> impossible to work on Fireworks through Dreamweaver.
>
> I've made test to show this trouble and I narrowed the
problem to the pictures
> as shown in the figures below,
>
> 1) In figure one I am creating a completely new
Fireworks file as arrow.png
> with two frames and one slice in it. After I am saving
it as .png I am
> exporting it as .html with images in /images subfolder.
>
> 2) After saving and closing the file in Fireworks, in
figure two, I am opening
> the html in Dreamweaver and changing the page properties
by writing zeros to
> page margins and by changing the default font.
>
> -----I guess in this point something happens which
breaks the integration
> between FW and DW--------because;
>
> 3) In figure three I am opening the .png through
Dreamweaver (by "Edit") and
> changes the place and size of the slice a little bit
>
> 4) When I press Done in Fireworks I see this picture in
figure four in
> Dreamweaver which shows integration between FW and DW
about table structure is
> broken. (In this point if I add any behaviur to the
slice DW doesn't recognize
> it, or any other change in FW can not be recognized by
DW)
>
> 5) In order to show this broken integration in table
sturucture, I am putting
> a new slice to png when Editing from DW in FW.
>
> 6) When I click on Done in DW I see this picture on the
figure six. Beacuse FW
> doesn't have any effect on html's table structure code.
>
>
> I can not upload images related my topic here but you
can see it in the same
> topic at
>
http://www.fireworksguruforum.com/index.php?showtopic=14282
>
>
>
I can reproduce your results, but I don't consider this a
bug; just a
limitation of Roundtrip editing.
You can't add or change slices without re-exporting the html
from
Fireworks. Roundtrip is for image editing, not for altering
the table
structure. If I edit, and re-export, my table remains intact.
If you want to edit the slices and resulting html, open the
PNG file
independently of Dreamweaver, change your slices and images
and then
choose File > Update HTML (this option is not available
when in
Roundtrip mode). FW will ask you to locate the html file.
When located,
you will have the options of
Replace Images and Their HTML - replaces the previous
Fireworks HTML.
Update Images Only - overwrites only the images.
As an aside, the rigid table created by FW is rarely
desirable for a
production web site.
HTH
Jim Babbage - .:Community MX:. & .:Adobe Community
Expert:.
http://www.communityMX.com/
CommunityMX - Free Resources:
http://www.communitymx.com/free.cfm
.:Adobe Community Expert for Fireworks:.
Adobe Community Expert
http://tinyurl.com/2a7dyp
.:Author:.
Lynda.com -
http://movielibrary.lynda.com/authors/author/?aid=188
Peachpit Press -
http://www.peachpit.com/authors/bio.aspx?a=d98ed798-5ef0-45a8-a70d-4b35fa14c9a4
Layers Magazine -
http://www.layersmagazine.com/author/jim-babbage -
What is the difference between mySAP2004 and SAP ERP 2004?
Hi,
Can anybody tell me what is the difference between mySAP2004 and SAP ERP 2004?
If someone has the document, then please mail me at [email protected]
With Regards
tiffnyHi Tiffny,
actually I don't see a difference as "mySAP2004" is not an official name for anything
There is "mySAP ERP 2004" which is the marketing name for a bunch of functionality provided by several different bits of software components.
Hth,
Michael -
Business Process & Integration between FI and CML
Hi,
Could you please brief about Business Process & Integration between FI and CML.
Thanks in advance
PrabhakarAny Inputs please for CML
-
Session variable filters in the integration between OBIEE and webcenter
Hello All,
I have a customer with the requirement to make sure that reports created in answers and containing sessions variables in filters definition will be correctly filtered once called from webcenter.
So if an OBI report is diplayed in webcenter and contains the same type of filters (based on session variable), will the results be filtered based on the specified variable?
In other words can we use session variables in the integration between OBIEE and webcenter?
Thanks OlayinkaHave you follow all the steps written here :
http://download.oracle.com/docs/cd/E10415_01/doc/bi.1013/e12188/T421739T475591.htm#T480640
Do you have create the groups ?
Do you connect as a member of the group XMLP_ADMIN ?
Cheers
Nico -
Custom Integration between CLM and SRM
Hi
Can any body help me how to do custom integration between CLM 2.0 and SRM for contracts using PI. On SRM side we have customised API. More specifically I need what is to be done in PI for custom integration between CLM and SRM.
Thanks in Advance
M G REDDYHi There,
Has anybody managed to custom integrate CLM & SRM?
If so please kindly share how this was achieved.
Thanks,
Sheena -
### How to make integration between UCCX and Active Directory##
Hello,
I want to know what is the right procedure to perform a right integration between the UCCX and the Active Directory?
Waiting Yours Reply,,,,
Thanks a lot......What version?
Assuming a current version (5.0 and higher): there is NO direct integration between CCX and Active Directory. The CCX server must not be joined to a domain.
CCX uses UC Manager End Users for synchronized usernames and passwords. If UC Manager is synchronized with an LDAP source, such as Active Directory, then this will carry forward to CCX. CCX would pass authentication requests to CCX through AXL. UCM would perform the LDAP authentication and inform CCX of the success/failure.
Maybe you are looking for
-
Is BT Vision Box only able to connect into TV via ...
planning on buying a posh new TV and they seem to have less scart leads connectors. Wondered if the BT Vision box comes with a different way to connect into TV or if it is scart only. thanks im retty stupid i know!
-
Cannot uninstall Adobe Acrobat 8 on Window 7 64-bit
I've been running the CS3 suite on windows 7 64-bit for years with no problems. Suddenly, most CS3 applications won't open, and if they do, they lock up. So, I figure no problem, I'll uninstall and then re-install. Wronk! (1) I could not deactivate t
-
Weblogic Service Invocation Error-Urgent help required.
failed to invoke operation 'searchCustomerDetails' due to an error in the soap layer (SAAJ); nested exception is: Message[ failed to serialize class java.lang.Objectweblogic.xml.schema.binding.SerializationException: type mapping lookup failure on cl
-
Exchange Rate to be picked up from MIGO Document Date
Dear Friends, During MIGO for a foreign purchase order the exchange rate is picked up from table OB08 based on the MIGO posting date.Is it possible for it to be picked up based on MIGO document date using exit.We are not using Material Ledger. TIA S
-
Multiple plist files for QTX in Pref folder.
Hi folks, Can you check your Preferences folder ( ~/Library/Preferences) to see if you too have numerous QuickTime Player X plist files? I found 142 files which are suffixed with some garbled letters at the end (com.apple.QuickTimePlayerX.plist.RlLCL