Integration between Cisco RADIUS and RSA

Ciao. I need some help to configure the RADIUS, activating the RSA "NEXT TOKEN CODE" feature. Can you help me?

If you have maintenance with RSA or your product is license, you can contact their support and they can give a step-by-step guide in PDF.
I've done similar using RSA and RADIUS for network staff login to all Cisco network devices using a token. The step-by-step guide provided by their support is very helpful.

Similar Messages

Routing issue between Cisco Nexus and Cisco 4510 R+E Chassis

We have configured Cisco Nexus 7K9 as core and Cisco 4510 R+E as access switches for Server connectivity.
We are experiencing problem in terms of ARP learning and Ping issues between Cisco Nexus and end hosts.

Hi,
So you have N7k acting as L3 with servers connected to 4510?.
Do you see the MAC associated with failing ARP in 4510?. Is it happening with all or few servers?. Just to verify if it is connectivity issue between N7k and 4510, you can configure an SVI on 4510 and assign address from same raneg (server/core range) and perform a ping.
This will help narrow down if issue is between server to 4510 or 4510 to N7k.
Thanks,
Nagendra

The difference of the IEEE802.1x Auth between Cisco Routers and Catalyst switches

Hello
I am investigating the difference of the IEEE802.1x Auth between Routers and Switches.
Basically dot1x auth is availlable on Catalyst Switches. however if I want to check to
PortBased Multi-Auth , MAC address Auth and any certification Auth with this feature,
Is it possible to integrate into Cisco Router such as Cisco 891F ?
In my opinion Cisco891F is also available to use basic IEEE802.1x but if it compares with Catalyst switches such as Cat3560X
I think there might be any unsupported feature on Cisco 891F.
I appreciate any information. thank you very much in advance.
Best Regards,
Masanobu Hiyoshi

Many time in interviews asked comaprison between cisco routers and switches that i was answerless bcoz i dont have much knowledge about that.Can anyone provide me the compariosin sheet of the same.how are the cisco devices differ with each other how much Bandwidth each routres support and Etc...
Ummmm ... The most common question I get is "what is the difference between a router and a switch".
However, if you get a question like this, then my impression to this line of questioning are:
1. The candidate they are looking for has in-depth knowledge of routers and switches. And I mean IN-DEPTH!;
2. They are not looking for a candidate. They just want to stroke their ego. There is not alot of people who can give you the "names and numbers" of routers and switches at a snap of a finger. And if you do happen to know the answer, then and there, then expect a tougher follow-up question.

Anybody help on integration between IS-RETAIL and CRM application?

hello experts!!
anybody help on how is the business process (or) functionality between IS-RETAIL and CRM application?
i mean integration between IS-RETAIL and CRM application.......

Hi Subha
Since IS-Retail is an Industrial Solution package which was built above the Baseline package,all the Business processes which were there in 4.7 is supported by IS - Retail. You can access the Retail Menu in W10T and S000 for your normal Menu in ECC6..
Regards
Anis

Regd : Integration Between Portal Layer And Process Layer

Hi Experts,
I have a query regarding the integration between Portal layer and the process layer in CE. How does the interaction happens or what is the process behind the integration of these two layers. I was going through some help documents at help.sap.com.
But from there I could not get much of information. So need your inputs on the same.
Thanks
Pradipta Kumar Mishra

Hi Pradipta,
If you are referring to Guided Procedures as the "Process Layer", then you have one of the three options that I can think of:
1) Deliver the GP processes via UWL in CE Portal
2) Deliver the GP processes via UWL in EP (if your organization has one)
3) Delvier the GP processes via GP Runtime in CE Portal
Of the three mentioned above, option 2 is preferred since your business users get to access their tasks via a single interface. But you need a EP. If that's not the case, I would suggest Option 1. For integrating GP and UWL, please refer to following link.
http://help.sap.com/saphelp_nwce10/helpdata/en/43/ef06a7860c7061e10000000a1553f6/frameset.htm
Thanks!
- Rao

Integration between Soluiotn Manager and HP Quality Center

Hi Folks,
I am currently configuring the integration between Solution Manager and HP Quality Center, and during the set up of communication user, I get the following error:
User hpqc_comm is not authorized to access projects
Message no. QC_INTEGRATION016
Diagnosis
You want to access projects in the Quality Center with the communication user hpqc_comm. This causes an error because the user either does not exist in the Quality Center or is not assigned to any project.
Procedure
Check whether the user hpqc_comm is in the Quality Center, and whether it is assigned to at least one project. Ask the Quality Center administrator to create the user and assign it to projects, if necessary.
You can use another user for the communication
Well, I have created that user in HPQC and assigned it to projects.
Thanks for your help
Marco

the error is in Solution Manager. I am defining the communication parameters in SOLAR_PROJECT_ADMIN / <selected project> / edit / Connection to HP Quality Center. I choose the corresponding project in Quality Center, but when I validate the screen, I get the error I mentioned before, even though the communication user exists in HPQC and is assigned to that specific project.
Thanks for your reply.
Marco

Integration between case management and C-folder

Dear Experts ,
Can you help regarding integration between Case Managment and C-folder ???
Kind Regards

Hi,
Simple answer: There is no specific integration existing.
Case Management is using DMS as one option to save documents like Word, Excel.
The cFolders solution is normally on a separate server and DMS documents can be checked out from the content server to cFolders and vice versa in SAP standard.
I have experience from both solutions and I really don't see how these two solutions should be linked to each other from a business perspective.
Regards, Johan

Integration between Sales Order and Inventory module

Hi....
Plz tel me d ans for.........
a)Integration between Sales Order and Inventory module.
    b)Integration between Delivery and Inventory module
    c)Integration between Invoice and FI module.
Thanks

>
manoja c wrote:
> Hi....
>
> Plz tel me d ans for.........
>
> a)Integration between Sales Order and Inventory module.
>     b)Integration between Delivery and Inventory module
>     c)Integration between Invoice and FI module.
>
>
> Thanks
HI Manoja,
a) Integration between Sales Order and Inventory module.
While creating sales order due to Strategy group in MRP3 view of material master does an availability check and determines the first date of availability.
b)Integration between delivery and Inventory module.
At the time of PGI (Goods issue)
Cost of Goods Sold is debited due to configuration in OBYC GBB T-Key To Inventory Account
c)Integration between Invoice and FI module.
In account assignment(that reminds me of your previous que CONDITION TECHNIQUE is used for Account Determination as well)
Tcode VKOA
Also when Billing document is released to Accounting
Customer Account is debited for the amount in Invoice.
and credited to Sales Revenue Account
Hope this clarifies to some extent
Post for further clarification
Reward if helpful
-Abhishek

Mobility between Cisco WLC and Meraki(other vendor)

Is it possible that users can roam between Cisco WLC and other vendor wireless gear? Meraki keeps saying it is possible.
They keep saying it is a IEEE feature and everone should support but I do not understand how?

While theoretically possible with the adoption of capwap, it would require all the manufacturers to follow the specs exactly the same. Kind of like hearding cats, not impossible, but highly unlikely.. That's just my opinion
Sent from Cisco Technical Support iPad App

Integration between SAP HR and PS (Project System)

Hi Guys,
Is there any integration between Project System and HR in SAP. My client is service oriented company.
Every month New customers will join and each customer they call it as one project & maintain in PS. Now my client requirement is, through PS recruitment requisition should have to come to HR (For ex XYZ customer requires 2 Supervisors, 1 Manager), so that HR will recruit employees for the project.
So is there any integration between PS & HR
Regards
Prasad

Hi Vikram Patil,
In my client place we are not implementing SAP Payroll, hence if any new project is created in PS, I need only man power requirement from PS, how can I proceed now
If is there any documents on PS and HR integration please forward to my mail ID
[email protected]
Regards
Prasad

VPN between cisco WRVS4400N and EdgeMarc

Hi Experts
Please help me.
Is it possible to create VPN between cisco WRVS4400N and EdgeMarc appliance.
Regards,
Ejaz

Hi Ejaz
I don't expect any cisco folks that answer this community to be expert on EdgeMarc, but i may be wrong..
We employ a open standard IPSec implementation.
Here is the open source document that relates to the RV220W.
http://www.cisco.com/en/US/docs/routers/csbr/rv220w/open_source/OSD_RV220W_78-19892-02.pdf
The question could have been, have you asked EsgeMarc if they wiork with open standard based IPSec implemations on our routers.
I would prefer you look at the RV220W if possible, which is a relatively young product.
I am guessing since you can source a product from Disti, try one and see if it works.
The beauty of buying from a Cisco Disti Partner, is they they have a returns policy. Check out that policy, if you wish and keep the packaging and try out your application.
Answered a question with someone trying to form a IPSec link to a OEM firewall/ IPSec gateway ..it worked. so give your application a try
regards Dave.

Difference between Cisco DCNM and CISCO Fabric Manager

Hello Everyone,
I am new to Cisco SAN and just would like to know the differences between cisco DCNM and Cisco Fabric manager and which one is latest as of now.
regards
VINAY

Hi Viany,
Fabric Manager was renamed DCNM starting at 5.2.
Fabric Manager only monitors SAN Fabrics, while DCNM 5.2 and above can monitor both SAN Fabrics and Ethernet LANs.
Regards,
David

Integration between Custom list and task list

Is it advisable to provide solutions for the integration between custom list and tasks list in SharePoint?
I am working on a scenario where the data has to be segregated between multiple lists and there will be transactions among these lists using workflow. Some of the capabilities in Tasks list like due date notifications, calendar, tracking are needed
on the transaction. Since these lists are based out of different content types, is it advisable to choose these lists for solutions?
When we have to make few updates through workflow from custom list to tasks, will there be any problem in the transactions as it is two different content type?
Vijayaragavan, MCTS

Since SPLists and SharePoint workflows don't provide inherent
support for transactions, you have to handle rollback operations yourself.
The easiest way to simulate a transaction is to read in the state of any list item you are changing prior to executing an update, and then write that state back should you detect a failure. It's not a perfect solution, since a sufficiently severe error might
prevent your rollback updates as well. That's the price you pay for not having the data store support transactions.
That being said, while it's true many clients will ask for business critical data to be stored in SPLists, I would argue that it's your job to convince them that it's not a good idea, and that transactional databases accessed over webservices are a much safer
SP compatible way to store important data - from
stackoverflow
[custom.development]

Inline Posture between Cisco ISE and Wireless LAN Controller

Hi,
I was looking into Cisco ISE solution for deploying NAC.
I have a question about the network topology.
In the user guide documents of cisco ISE, it is written that for Wireless LAN Controllers (WLC) and VPN devices, an additional server, Inline Posture, is needed.
However, in the following integration document, there is not an inline posture between WLC and Cisco ISE server.
https://supportforums.cisco.com/docs/DOC-18121
I want to know if Inline Posture is a requirement, if not a requirement, what are the benefits of having it between Cisco ISE Server and WLC.
Thanks & Regards
Sinan

Hello,
Please go through below mentioned links which might be helpful for you.
http://www.cisco.com/en/US/docs/security/ise/1.2/user_guide/ise_ipep_deploy.html
http://www.cisco.com/en/US/docs/security/ise/1.2/installation_guide/ise_deploy.html
Best Regards,

Integration between Cisco VOice gateway & Ericcsion MD110 EPBX

Hi
Need to know what parameters needs to match in between Cisco VG & Ericcsion PBX while integration(india off is going to connect through MPLS link(E1) via VG to US, in US we have avaya PBX)
We have a E1 connection (trunk) between VG & PBX.
Also need physical connectivity details like cross or stratght cable details.
Send important doc link also
Regards
Naga.

Hello,
the pinout for the router is documented at at:
http://cisco.com/en/US/products/hw/modules/ps2641/products_module_installation_guide_chapter09186a008007cb4c.html
You will need to configure both PBXs for ISDN PRI as described at;
http://cisco.com/en/US/partner/products/ps6350/products_configuration_guide_chapter09186a00800ca716.html
Note the correct command is "isdn incoming-voice voice" and not "modem" as the documentetion wrong in this.
Hope this helps, please rate post if it does!

Integration between Cisco RADIUS and RSA

Similar Messages

Maybe you are looking for