Integration Between CRM and REFX

Hi experts,
Please let me know how to integrate CRM with REFX If any body has done CRM-REFX implementation can you share
documents ( CRM with REFX in CRM 2007 ver 7.0).
Regards
NK

Dear SAP Experts,
I have a same requirement with Neeraj about how to integrate CRM with RE-FX (Flexible Real Estate Management).
As I know, the Business Partner is one of the integration points between them. When we use Opportunity Management (CRM), the opportunity will be transformed to a sales order in SD module (ERP).
Would you please help me on the following queries:
1/ Can we transform the opportunity (CRM) to a contract in RE-FX module (ERP)?
2/ Is there any link between Product (CRM) and Rental Object (RE-FX)?
Any replies/suggestions will be high appreciated.
Hope to hear from you soon!
Thank you very much in advance.
Best regards,
D.H.L

Similar Messages

  • How does the integration between CRM and SD occur

    How does the integration between CRM and SD occur?  Is only via ALE and are there config steps in CRM to ensure the correct data mapping between CRM and SD?
    So, if I create an order or quote in CRM how is it then created in SD?  Or do they share the same data store.
    thanks

    Hi John,
    Here is good documentation regarding Data Exchange for Sales Transactions: the CRM Enterprise and the ERP System are two different repositories, If you create the Sales Order in CRM then they will be replicated into SD (using CRM Middleware, BDoc's)
    http://help.sap.com/saphelp_crm60/helpdata/en/52/2d0c38941e5666e10000009b38f8cf/frameset.htm
    Also you can check the best practice guide for CRM 2007 there you have plenty of information
    http://help.sap.com/bp_crmv12007/CRM_DE/HTML/index.htm
    Hope this help,
    Regards,
    Ramon

  • Integration between CRM and PM

    I am working on a utility project for the very first time and I don't really understand the integration between CRM and PM.
    Can somebody please provide me some documentation with it?
    I am trying to understand how a service order that arises out of CRM goes to PM..does it go?
    I need the help urgently
    Cheers
    Vidya

    Dear Konda Reddy,
    Visit the following link:
    http://help.sap.com/saphelp_crm50/helpdata/en/4f/81bfc33e624f148710800b04971033/content.htm
    Regards,
    Naveen.

  • Very Very Urgent Please help me  Integration between OIM and Siebel CRM

    1.The system is proprietary of nature and hence not out of the box provisioning agents exist to integrate the system.
    Integration options for COPS(Customer Organisation Profiling System) ) is a proprietary CRM system holding contact, billing and other profile information as the authoritative source on customers;
    I need complete solution.Please help me its very very urgent.

    As mentioned in your Subject, if it is integration between OIM and Siebel CRM, we have an OOTB connector available for it. Even if your application is similar to Siebel CRM, you can refer the OOTB Siebel connector and do some reverse engineering on it to make a similar one..
    Hope it helps.. otherwise .. all the best and go ahead with writing a new connector and share your exp with the other forum members.
    cheers

  • Need to establish Connection between CRM  and   Virtual Directories.

    Dear All,
    I am working for Telecom project.
    I have one requirement that we need to establish Connection between CRM and   Virtual Directories.
    This is existing in Access management system.( SAP EP environment )
    The basic requirement is, with  SAP EP environment we are integrating 8 different application. But for all this Application we have a one more system called Access management system (like Basis in Sap). This will validate the user access and BP(Business Partner ) data for users who logon to a different respective application. For all this applications Company data (Master Data) has to provide from CRM and the changes took place for Company data in CRM will be updated in to Virtual Directories .For this service we need to establish Delta mode connection between SAP CRM and Virtual Directories.
    Which is existing in Access management system .
       Do we have any standard connectors from SAP CRM to connect and who we can achieve this .
    Please let us know..Certainly there will be a reward points
    Thanks & regards.
    BNP

    Try posting this question on the BPA Suite forum - http://forums.oracle.com/forums/category.jspa?categoryID=194

  • Need to transfer field KLABC (ABC Classification) between CRM and R/3

    Hello Group,
    We plan to make the R/3 field KLABC (ABC Classification) of a customer (R/3 Table KNVV, Attribute KLABC) available in SAP CRM under Customer's sales area data. It should also be maintainable in SAP CRM.
    After some analysis we found out, that this field also exists in SAP CRM (Table SMOKNVV, Attribute KLABC) but it is not replicated between CRM and R/3 (and vice versa). Also this field is not displayed in SAP GUI as well as not in the PCUI.
    Now we are analyzing the two options:
    1) Make KLABC from table SMOKNVV available in SAP CRM (and PCUI) for maintenance and extend the Middleware to enable the replication of KLABC between CRM and R/3
    2) Extend the customers sales area data in CRM (PCUI) by a new attribute „ZKLABC“ and extend the Middleware to enable replication between R/3 KLABC and the newly created ABC attribute in CRM
    We have the following questions:
    - What would be the better & easier approach ? Any recommendation or comment is highly appreciated.
    - If we choose option 2, to what extend would the SAP CRM Easy Enhancement Workbench (EEWB) support this development (Is it possible to extend the business partners sales area data with EEWB ? Does the EEWB also extend BDocs if you add new fields to Business Partner tables ?)
    Background Information:
    We have SAP CRM 4.0 SP8, R/3 4.7 and SAP Enterprise Portal 6.0
    Thanks a lot for help,
    Erik

    Hello Frédéric,
    no, I do not have the middleware enhancement guide. Do you have it electronically and could send it to me erikmueller (at) gmx.de ?
    In CRM would make the field KLABC from table SMOKNVV available in PCUI? Or would you use the Easy Enhancement Workbench to introduce a new field?
    Either way I the middleware would need to be enhanced, but I would like to understand what is easier in CRM to have the field available in PCUI.
    Thanks for the info.
    Regards,
    Erik

  • Is it a Bug? Integration between Dreamweaver and Fireworks is broken in somewhere?

    I can not upload images related my topic here but you can see
    it in the same topic at
    http://www.fireworksguruforum.com/index.php?showtopic=14282
    I use CS3 Suite. It is a big trouble for me in working on
    real pages. Integration is broken in somewhere else and after that
    point it becomes impossible to work on Fireworks through
    Dreamweaver.
    I've made test to show this trouble and I narrowed the
    problem to the pictures as shown in the figures below,
    1) In figure one I am creating a completely new Fireworks
    file as arrow.png with two frames and one slice in it. After I am
    saving it as .png I am exporting it as .html with images in /images
    subfolder.
    2) After saving and closing the file in Fireworks, in figure
    two, I am opening the html in Dreamweaver and changing the page
    properties by writing zeros to page margins and by changing the
    default font.
    -----I guess in this point something happens which breaks the
    integration between FW and DW--------because;
    3) In figure three I am opening the .png through Dreamweaver
    (by "Edit") and changes the place and size of the slice a little
    bit
    4) When I press Done in Fireworks I see this picture in
    figure four in Dreamweaver which shows integration between FW and
    DW about table structure is broken. (In this point if I add any
    behaviur to the slice DW doesn't recognize it, or any other change
    in FW can not be recognized by DW)
    5) In order to show this broken integration in table
    sturucture, I am putting a new slice to png when Editing from DW in
    FW.
    6) When I click on Done in DW I see this picture on the
    figure six. Beacuse FW doesn't have any effect on html's table
    structure code.
    I can not upload images related my topic here but you can see
    it in the same topic at
    http://www.fireworksguruforum.com/index.php?showtopic=14282

    damlays wrote:
    > I can not upload images related my topic here but you
    can see it in the same
    > topic at
    >
    http://www.fireworksguruforum.com/index.php?showtopic=14282
    >
    >
    > I use CS3 Suite. It is a big trouble for me in working
    on real pages.
    > Integration is broken in somewhere else and after that
    point it becomes
    > impossible to work on Fireworks through Dreamweaver.
    >
    > I've made test to show this trouble and I narrowed the
    problem to the pictures
    > as shown in the figures below,
    >
    > 1) In figure one I am creating a completely new
    Fireworks file as arrow.png
    > with two frames and one slice in it. After I am saving
    it as .png I am
    > exporting it as .html with images in /images subfolder.
    >
    > 2) After saving and closing the file in Fireworks, in
    figure two, I am opening
    > the html in Dreamweaver and changing the page properties
    by writing zeros to
    > page margins and by changing the default font.
    >
    > -----I guess in this point something happens which
    breaks the integration
    > between FW and DW--------because;
    >
    > 3) In figure three I am opening the .png through
    Dreamweaver (by "Edit") and
    > changes the place and size of the slice a little bit
    >
    > 4) When I press Done in Fireworks I see this picture in
    figure four in
    > Dreamweaver which shows integration between FW and DW
    about table structure is
    > broken. (In this point if I add any behaviur to the
    slice DW doesn't recognize
    > it, or any other change in FW can not be recognized by
    DW)
    >
    > 5) In order to show this broken integration in table
    sturucture, I am putting
    > a new slice to png when Editing from DW in FW.
    >
    > 6) When I click on Done in DW I see this picture on the
    figure six. Beacuse FW
    > doesn't have any effect on html's table structure code.
    >
    >
    > I can not upload images related my topic here but you
    can see it in the same
    > topic at
    >
    http://www.fireworksguruforum.com/index.php?showtopic=14282
    >
    >
    >
    I can reproduce your results, but I don't consider this a
    bug; just a
    limitation of Roundtrip editing.
    You can't add or change slices without re-exporting the html
    from
    Fireworks. Roundtrip is for image editing, not for altering
    the table
    structure. If I edit, and re-export, my table remains intact.
    If you want to edit the slices and resulting html, open the
    PNG file
    independently of Dreamweaver, change your slices and images
    and then
    choose File > Update HTML (this option is not available
    when in
    Roundtrip mode). FW will ask you to locate the html file.
    When located,
    you will have the options of
    Replace Images and Their HTML - replaces the previous
    Fireworks HTML.
    Update Images Only - overwrites only the images.
    As an aside, the rigid table created by FW is rarely
    desirable for a
    production web site.
    HTH
    Jim Babbage - .:Community MX:. & .:Adobe Community
    Expert:.
    http://www.communityMX.com/
    CommunityMX - Free Resources:
    http://www.communitymx.com/free.cfm
    .:Adobe Community Expert for Fireworks:.
    Adobe Community Expert
    http://tinyurl.com/2a7dyp
    .:Author:.
    Lynda.com -
    http://movielibrary.lynda.com/authors/author/?aid=188
    Peachpit Press -
    http://www.peachpit.com/authors/bio.aspx?a=d98ed798-5ef0-45a8-a70d-4b35fa14c9a4
    Layers Magazine -
    http://www.layersmagazine.com/author/jim-babbage

  • Steps involved in setting up communication between CRM and R3 / ECC

    Hi all,
    Can you please tell what are the steps involved in setting up communication between CRM and R3 or ECC.
    I know that initially logical systems, RFC connections and other technical settings need to be done by Basis consultants.
    From a functional consultants viewpoint, what all config settings need to be done so that data transfer between the systems can take place?
    Thanks in advance.

    Hi,
    There are a series of steps that are to be done...
    These include creating sites and subscription in CRM, setting up filters, and number ranges....
    All these are in the connectivity guide C71 and replication guide B09.
    Refer C71 first and then B09. These would suffice.
    You can get these both in the follwoing reference:
    http://help.sap.com/bp_crmv340/CRM_DE/index.htm
    If you dont get, then gimme your email id, i shall forward these docs to you.
    Kindly reward with points in case helpful
    Sharif.

  • Can any one send procedure for integration between XI and Geographic inform

    can any one send procedure for integration between XI and Geographic information System(GIS).
    Please clarify ASAP..
    Thanks

    Hi,
    Please see the below links
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/d53af8ca-0801-0010-08b0-dce9e02130a8
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/d53af8ca-0801-0010-08b0-dce9e02130a8
    GIS VS XI
    Regards
    Chilla..
    Points rewarded if it is usefull..<i></i>

  • Business Process & Integration between FI and CML

    Hi,
    Could you please brief about Business Process & Integration between FI and CML.
    Thanks in advance
    Prabhakar

    Any Inputs please for CML

  • Integration between Hr and SD

    hai sap family memebers,
    Can anybody lit me the integration between hr and sd
    as per as my knowledge
    xd02--> we can integrate hr an sd
    if any thing new plz let me know
    all the best
    madhu

    Hi Madhu,
    I think Integration will also happen through Infotype 0900 (Sales Data).
    Here we will assign Employee to Sales Organization, Sales Office and Sales Group
    Thanks
    Uday

  • About integration between SAP and non-SAP applications via javaidoc classes

    Hi,All
    Now we are implementing a SAP-Retail project,we encounter a problem of integration between SAP and non-SAP applications(POS),we want to set Inbound/Outbound between SAP and POS applications realtimely,POS can connect to the SAP system via VPN,weather it can be implemented?
    I conceive to implement it with SAP Java Connector IDoc Class,I don't know weather it is the best solution?If not,please give some other proposal.
    I have download the classes from SAP website and try it with the samples provided by SAP(JCoIDocSample1.java/JCoIDocSample3.java),In my testing,Inbound is succeed,but,in SAP-Retail IS,standard Outbound message type is defined via file port,some one told me that SAP Java Connector IDoc Class can only receive idocs from tRFC port?is it true?If not,please tell me how to deploy in SAP so java program can receive idocs from file port?

    We too are interested in finding information on integration between SAP and Intergraph.  Were you able to obtain information and I was wondering if could share this with us.
    Thanks,
    Sue
    City of Edmonton

  • How to establish the connection between crm and r/3

    Hi,
    Sorry for posting this question in this forum, i did not find any CRM forums.My question is,How to establish the connection between CRM and R/3...in my office i installed standard alone CRM system,but it is not talking to R/3.
    Could any one tell me where to find adapters and plugins for this.
    Thanks in advance.
    Ajey

    Hello Ajey,
    in the case you mean the connection between R/3 and SAP CRM you should read the Best Practice Guides:
    B01: CRM Generation
    C71: CRM Connectivity
    B09: CRM Replication
    from http://help.sap.com/bp_crmv240/index.htm. There is a CRM Forum at http://www.sap.com/community/ and also at http://www.sapfans.com/.
    Regards
    Gregor

  • Session variable filters in the integration between OBIEE and webcenter

    Hello All,
    I have a customer with the requirement to make sure that reports created in answers and containing sessions variables in filters definition will be correctly filtered once called from webcenter.
    So if an OBI report is diplayed in webcenter and contains the same type of filters (based on session variable), will the results be filtered based on the specified variable?
    In other words can we use session variables in the integration between OBIEE and webcenter?
    Thanks Olayinka

    Have you follow all the steps written here :
    http://download.oracle.com/docs/cd/E10415_01/doc/bi.1013/e12188/T421739T475591.htm#T480640
    Do you have create the groups ?
    Do you connect as a member of the group XMLP_ADMIN ?
    Cheers
    Nico

  • Custom Integration between CLM and SRM

    Hi
    Can any body help me how to do custom integration between CLM 2.0 and SRM for contracts using PI. On SRM side we have customised API. More specifically I need what is to be done in PI for custom integration between CLM and SRM.
    Thanks in Advance
    M G REDDY

    Hi There,
    Has anybody managed to custom integrate CLM & SRM?
    If so please kindly share how this was achieved.
    Thanks,
    Sheena

Maybe you are looking for