Integration between ECC PDF document and NW2004s portal ...

I am hoping someone can point me to some documentation to do the following ... I have an adobe forms pdf document in SAP ECC. I can pull up the PDF file in ECC and it looks fine. How do I create a request from a NW2004s EP7 SPS15 portal that will display the PDF on the portal?
We have installed Adobe Document Services (ADS) and I have tested all the connections and everything appears to be configured correctly.
I don't know how to make the call from the portal and have the PDF file that I can generate in ECC display on the portal.
Any help will be appreciated! Thanks.

Hi Angie,
If you have the PDF doc, you can upload that into the KM repository and create a KM document iview.
http://help.sap.com/saphelp_nw04/helpdata/en/fc/cf14bcd42911d5994400508b6b8b11/frameset.htm
Is this what you are looking for?
Cheers,
Sandeep Tudumu

Similar Messages

Difference between ECC 6.0 and earlier versions

Hi,
one of the difference between ECC 6.0 and earlier versions is that instead 'WS_UPLOAD' and 'WS_DOWNLOAD' in ECC we should use 'GUI_UPLOAD' and 'GUI_DOWNLOAD' respectively.
(of course SPDD and SPRO tcodes is known by everone i suppose)
Similarly can u all put down some differences here, atleast one entry by each, I think we can make a good docu. I have searched the net for the differences but could not get much, so by each of us contributing one each, it would become good docu..for all of us.
Thanx in advance

Unicode Errors Encountered and their Solutions
E1. In u201CTEXT MODEu201D the u201CENCODINGu201D addition must be specified.
     Error:
     OPEN DATASET FILE FOR OUTPUT IN TEXT MODE.
     Solution:
     OPEN DATASET FILE FOR OUTPUT IN LEGACY TEXT MODE.
E2. In Unicode, DESCRIBE DISTANCE can only be used with the IN BYTE MODE or IN
      CHARACTER MODE addition.
     Error:
     DESCRIBE DISTANCE BETWEEN T_KOMK AND T_KOMK-HIEBO01 INTO BPOS.
     Solution:
DESCRIBE DISTANCE BETWEEN T_KOMK AND T_KOMK-HIENR01 INTO BPOS
IN CHARACTER MODE.
E3. u201CUSR02-UFLAGu201D must be a byte-type field (Typ X or XSTRING )
     Error:
     IF USR02-UFLAG O YULOCK.
     Solution: Since the data type of USR02-UFLAG is type INT and is compared with data type
                X u2013 Hence the error. So we define a new variable ZULOCK and assign the
                value of USR02-UFLAG to ZULOCK.
              New variable
              DATA: ZULOCK(1) TYPE X.   "APBRP00
              Assign value
                            ZULOCK = USR02-UFLAG.
        Compare -
               IF ZULOCK = YULOCK.   u201Creplace IF USR02-UFLAG O YULOCK.
E4. HT cannot be converted to a Character type field
Error :
WRITE ht TO t_data+10(2).
Solution : Since the data type of ht is a type u2018Xu2019 and the data is been transfer to
         t_data which has a data type u2018Cu2019. value of one data type cannot be copy to
         another data type where one of them is type string .Hence the error occur,
         so the data type of ht is been change to Type u2018Cu2019
     OR
           A Tab ( value 09 ) is introduced as part of the row. The value 09 is not converted in Unicode environment. Instead we need to use class
     Error:
          DATA: BEGIN OF ht,
               x(1) TYPE x VALUE '09',
          END OF ht.
     Solution:
              Define Class after the Tables definition.
                   CLASS cl_abap_char_utilities DEFINITION LOAD.
              Data Defination : Comment internal table HT and define a variable HT type C.
       *   Insert + APRIA00 05/02/2007 Unicode project
       *   DATA: BEGIN OF ht,
     *         x(1) TYPE x VALUE '09'
       *   END OF ht.
     *   Insert - APRIA00 05/02/2007 Unicode project
       DATA HT type C.
       Before using HT assign Horizontal tab.
                 Ht = CL_ABAP_CHAR_UTILITIES=>HORIZONTAL_TAB.
E5. In Unicode programs the u201C#u201D cannot appear in names, as it is does here in the name    u201C#LINESu201D
     Error :
     #LINES                 TYPE I,
     Solution : Since the # is used in the start of name, it is not allowed. We need to
              remove it.
     Solution for the above
     V_LINES                 TYPE I,
E6. In u201CTEXT MODEu201D the u201CENCODINGu201D addition must be specified as well as the addition was required FOR OUTPUT,FOR INPUT, FOR APPENDING OR FOR UPDATE was expected.
     Error:
     OPEN DATASET PATH_NAME IN TEXT MODE.
     Solution:
     Download =     OPEN DATASET PATH_NAME FOR OUTPUT IN LEGACY TEXT MODE.
     Upload        = OPEN DATASET AUSZUG-FILE IN TEXT MODE FOR INPUT ENCODING DEFAULT.
E7. u201CTABu201D must be a character-type data object( data type C,N, D, T or String). Field string)
     Error:
            data: begin of tab,                   "Excel Parameter Split at TAB
        t type x value '09',          "Tabulator
       end of tab.
            concatenate 'Material' 'Package Status'
                into z_download-line separated by tab.
            ( In the above command the two field are to be separated with a horizontal Tab. The earlier      way of assigning the tab value u201809u2019 will not work in Unicode environment.
     Solution:
     Define a class just after the Table defination.
          CLASS cl_abap_char_utilities DEFINITION LOAD.
            Define variable Tab as shown below :
          Data : TAB           TYPE C.
     Before the concatenate statement assign the value of Tab using pre-defined attributes.
          TAB = CL_ABAP_CHAR_UTILITIES=>HORIZONTAL_TAB.
E8. Upload/Ws_Upload and Download/Ws_Download are obsolete, since they are not Unicode-
      enabled; use the class cl_gui_frontend_services
     Error-1: Function WS_DOWNLOAD is obsolete in Unicode environment.
            call function 'WS_DOWNLOAD'
                 exporting
                      filename = zfilename
                 tables
                      data_tab = z_download.
     Solutions-1: Instead of WS_DOWNLOAD use GUI_DOWNLOAD.
CALL FUNCTION 'GUI_DOWNLOAD'
EXPORTING
*   BIN_FILESIZE                  =
    FILENAME                      = zfilename
TABLES
    DATA_TAB                      = z_download.
E9. The "/" character is reserved for identification of namespaces. It must be entered twice.
        The name of a namespace must be at least 3 characters long.
     Error :
                 U/N(3)        TYPE C, "U/N    --> ERSETZT DURCH SPACE
     Solution :
     * Special character can not be used to define a data variable
     *      U/N(3)        TYPE C, "U/N    --> ERSETZT DURCH SPACE
              U_N(3)        TYPE C, "U/N    --> ERSETZT DURCH SPACE
     * Insert - APSUS02 07/02/2007 Unicode Project
E10. "LP_TAB" and "CS_TAB" are not mutually convertible. In Unicode programs,
         "LP_TAB" must have the same structure layout as "CS_TAB", independent of the length
         of a Unicode character.
     Error : This error is encountered when data from one internal table is copied to another
                         internal table which different structure. In this case its LP_TAB & CS_TAB.
                 LP_TAB[] = CS_TAB[].
     Solution :
          * Replace + APSUS02 07/02/2007 Unicode Project
*   LP_TAB[] = CS_TAB[].
              move-corresponding CS_TAB to LP_TAB.
          * Replace + APSUS02 07/02/2007 Unicode Project
E11. Could not specify the access range automatically. This means that you need a RANGE
          addition.
     Error : Range need to be specified as an addition to the command.
            DO 4 TIMES VARYING HELP_CHAR FROM ABCD(1) NEXT ABCD+1(1).
           Solution :
            DO 4 TIMES VARYING HELP_CHAR FROM ABCD(1) NEXT ABCD+1(1)
          * Insert + APSUS02 07/02/2007 Unicode Project.
                                                      RANGE ABCD+0(4).
* Insert - APSUS02 07/02/2007 Unicode Project.
E12 . Processing Terminated Error code: Error in opening /
                                          Path not found when downloading to Unix directory.
     Error : PARAMETER: outfile(92) DEFAULT
              '/CP/interface/NPP/data/MX/cbslaprcpts'
                    LOWER CASE,
               kmxmstrd AS CHECKBOX.
            This error is encountered when the path is missing. The above path is related to CCP.
     Solution: For testing purpose comment the original path and replace it with
                                 /CP/interface/CCD/Unicode_test/
E13.    Upload/Ws_Upload and Download/Ws_Download are obsolete, since they are not                                                                       Unicode- enabled; use the class cl_gui_frontend_services
     Error: Function WS_UPLOAD is obsolete in Unicode environment. (During UCCHECK)
               Call function 'WS_UPLOAD'
       Exporting
            Filename                = zfilename
            Filetype                = u2018DATu2019
       Tables
            data_tab                = z_upload
       Exceptions
            Conversion_error        = 1
            file_open_error         = 2
            file_read_error         = 3
            invalid_table_width     = 4
            invalid_type            = 5
            no_batch                = 6
            unknown_error           = 7
            gui_refuse_filetransfer = 8
            others                  = 9.
     Solution: Instead of WS_UPLOAD use TEXT_CONVERT_XLS_TO_SAP. Do not use temporary file put the file name as it is.
1) First define a type pool and a variable of type truxs_t_text_data.
TYPE-POOLS: truxs.
DATA: it_raw TYPE truxs_t_text_data.
     2) Use this it_raw in the function module in parameter i_tab_raw_data. Put file name and the internal table in the function module.
CALL FUNCTION 'TEXT_CONVERT_XLS_TO_SAP'
    EXPORTING
*     I_FIELD_SEPERATOR        =
*      i_line_header            = ' '
      i_tab_raw_data           = it_raw       " WORK TABLE
      i_filename               = zfilename
    TABLES
      i_tab_converted_data     = z_upload[]    "ACTUAL DATA
   EXCEPTIONS
      conversion_failed        = 1
      OTHERS                   = 2.
     Comment u201Ci_line headeru201D. It takes the first/ header line of the file which is to be uploaded.
Put square brackets after internal table as shown above.
E14.    CURSORHOLD may not be converted into a number.
     Error: GET CURSOR LINE CURSORHOLD VALUE CURSOR_HOLD.
     Solution: In the declaration part of CURSORHOLD, one field is of u2018Pu2019 type and one field is of u2018Iu2019 type, which is not allowed in Unicode environment.So change the the type of it to NUMC.

Difference between ecc 5.0 and 4.7 or earlier in MM

Hello masters,
would you briefly explain the diffrence between ecc 5.0 and 4.7. as per MM module is concerened ,any document or link given will be appriciated .
Thanks in Advance,
Suresh.

Please check these links...
Upgrading notes 4.7 Vs ECC6
Solution Browser would give the differences (Features):
http://solutionbrowser.erp.sap.fmpmedia.com/ Give source and target versions.
Release Info:
ECC 6.0:
http://help.sap.com/saphelp_erp2005/helpdata/en/43/68805bb88f297ee10000000a422035/frameset.htm
ECC 5.0:
http://help.sap.com/saphelp_erp2004/helpdata/en/c6/feda40ebccb533e10000000a155106/frameset.htm
You can find the difference in release notes of each SAP version.
Here are the links.
http://help.sap.com/saphelp_47x200/helpdata/en/fc/e3003deddfae4de10000000a114084/frameset.htm
http://help.sap.com/saphelp_scm50/helpdata/en/28/b34c40cc538437e10000000a155106/frameset.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/43/68805bb88f297ee10000000a422035/frameset.htm
Thanks
Senthil

Cant get the font on PDF document and alignment

I cant get the font on PDF document and alignment eventhough I have margins to 0 still getting some space from the top and left side.
I have added fonts to CF Admin and restarted too still same issue. I am able to see fonts are added in CF Admin.

I suspect there is a little bit of padding between the HTML content and the edge of the PDF page. You could solve the problem by specifying the fonts and margins using the HTML style property, like this, for example:
<cfdocument format="PDF" pageType="A4" marginBottom="0" marginLeft="0" marginRight="0" marginTop="0">
<head>
        <meta http-equiv="Content-Type" content="text/html; charset=utf-8" />
    <style>
        body{font-family:arial,sans-serif;font-size:100%;margin-top: 0px; margin-left: 0px; padding: 0;}
        p{font-family:"Times New Roman", Times, serif;font-size:14px}
    </style>
</head>
<body>

</body>
</cfdocument>

How to create RFC Destination Between ECC 6.0 and BI 7.0

HI,
My name is balu working in gucons,i was trying to create RFC between ECC 6.0 and BI 7.0,i have tried with the help of some documents but iam unable to do that,Iam very helpfull if you give a clear description regarding this problem.
Thank you,
Regards,
BALU.

Hi Balu
the error screen is from your BI system? If yes, then why the source system is showing to be of type BI? For ECC it should be of type r/3.
You can try to delete already created RFC from both your BI and ECC system and try to create source system connection from your BI end from RSA1>> Source System> right click..Create..
Choose "Automatically Create SAP system" . Enter the required credential then click on "Replicate as well"
If you do not want to delete any RFC for any reason please upload entries from RSBASIDOC, RSLOGSYST table.

How to make a Integration between jdev10.1.2 and vss

How to make a Integration between jdev10.1.2 and vss to enable a version control.the help document tell to make a extension file, but how to do? thank you!

http://www.oracle.com/technology/products/jdev/101/htdocs/partners/addins/905resources.html
There is a link there to:
Creating a Version Control System Extension
A project with sample code to get you started

Difference between ecc 4.0 and 6.0

Hello,
Please can someone tell me wht is the difference between ecc 4.0 and 6.0 in relation with BW.Like how will BW be affected with the change.
the other ques is that can we work on ECC 4.0 with BI7 ot BI7 will only work on ecc 6.0. Please can someone explain me tht.
thanks

For Functionality Differences pls refer to the below site -
http://solutionbrowser.erp.sap.fmpmedia.com/
After opening the site, please select the Source Release Version which is 4.0 b Then Select the Target Release Version which is "mySAP ERP 2005" or ECC 6.0
Select the Solution Area like Financials, Human Capital Management, Sales....
Select module like MM, PP, SD, QM.....
Click on Search
Then it displays the Release Version and the Delta Functionality. which can be downloaded to a word document if required.
and also check the release notes of ECC 6.0 in service.sap.com.
Hope this helps you.

Does anyone know of an e-reader app for the iphone that has text to speech capability? I have a Kindle 3G that can read whole pdf documents and books but I cannot figure out how to do it on my iphone 4.

Does anyone know of an e-reader app for the iphone that has text to speech capability? I have a Kindle 3G that can read whole pdf documents and books but I cannot figure out how to do it on my iphone 4.
All of the apps I have found on the App store either do not have the text to speech capability or if they have it they will only read a page at a time or simply read the text you paste into their window. I really do not understand what is so difficult about having this feature as Kindle provides it--though Amazon does not make the feature available on its iPhone 4 app.
Please help.

thanks. yes i am aware of the VoiceOver feature but it is NOT the solution to my problem. as you said, it is a solution to a different set of issues. i want the text to speech ability because i there are books i need to read but do not have the time to sit down and read them and have become used to listening to them read to me either by a professional human reader or with the text to speech software on the Kindle.
I think Apple makes the best audio devices but i am really disappointed in this inexplainable shortcoming. if apple can give us siri they ought to be able to design a nice little button that i can push to turn on text to speech while i am in a document, book, magazine or webpage. clearly it is possible as apple has added the "reader" button in safari to have web pages dropped into the reader format.
thanks for your suggestion though, it is what everyone suggests but it does not address the issue.

How to Create a PDF Document and apply Digital Signature in C# using the Adobe SDK?

Hi Everybody!
I have to do two distinct tasks here:
1) How can I create a PDF document using the Adobe SDK in my .NET Applications(C# - 2.0)?
I just need a basic sample to create a document with a simple text, for example. I did not find any useful information in the adobe documentation. I have the Acrobat Professional 8.0 in my computer, but it's very dificult to work whith de Acrobat.dll and .NET with a poor documentaion.
2)How can I apply digital signature in a existent pdf document?
I need to sign documents using the SDK, just a basic sample in c# would be helpful to start!
Anybody could help?
Thank in advance!

Leonard Rosenthol or anybody that can help, sorry to insist.
I will explain better my problem:
I have an ASP.NET WebPAge (C# - 2.0). In this page, the user make a request. The request should generate a PDF document with the informations of the request and with a field to add a digital signature. The document created will be send to a approver that will confirm the approval applying his digital signature (I need to do too, a webpage where the approver open the page, choose the pdf document, and sign, just selecting his own certificate and clicking in the button SIGN... but this is another problem).
That's the reason that I have to create a PDF document. If I create a WORD or HTML document, and then convert to PDF, how can I add a field to digital signature in this pdf document?
Is there any solution using Acrobat SDK?
Thank you very much!

How can I remove a page from a PDF document and save it as a new PDF document?

How can I remove a page from a PDF document and save it as a new PDF document?

Tools - Pages - Extract and tick the option to delete the extracted page from the original file.

I want to sign the SECOND page of a pdf document and this system won't let me scroll down past the first page!

I want to sign the SECOND page of a pdf document and this system won't let me scroll down past the first page!

Having the same issue, can someone please enlighten us?

How do extract one page from one pdf document and save as a new pdf?

How do I extract one page from a pdf document and create a new document?

In Acrobat: Tools - Pages - Extract.
In Reader it's not possible.
On Sat, Jan 31, 2015 at 10:29 PM, Ned Murphy <[email protected]>

Create a PDF document and attach it to a service order business transaction

Hi all,
I have following requirement. For a particular service order, i am reading the entire survey details and then my requirement is that i want to convert this details into a PDF document and then attach the document to the same service order.
Right now, i have created a SMARTFORM which prints the required details. I got the OTFDATA of the smartform and now my problem is to convert it into PDF and then attach it to the service order .
Kindly help.
Points will be rewarded.
Thanks in advance,
Karan

business object
business_object-instid = guid.
business_object-typeid = 'BUS2000116'.
business_object-catid = 'BO'.
PROPERTIES
ls_loio_properties-name = 'DESCRIPTION'.
APPEND ls_loio_properties TO l_loio_properties.
ls_loio_properties-name = 'KW_RELATIVE_URL'.
ls_loio_properties-value = 'Test'.
APPEND ls_loio_properties TO l_loio_properties.
CLEAR ls_loio_properties.
ls_loio_properties-name = 'DESCRIPTION'.
APPEND ls_loio_properties TO l_phio_properties.
ls_loio_properties-name = 'KW_RELATIVE_URL'.
ls_loio_properties-value = 'any name'.
APPEND ls_loio_properties TO l_phio_properties.
ls_loio_properties-name = 'LANGUAGE'.
ls_loio_properties-value = 'EN'.
APPEND ls_loio_properties TO l_phio_properties.
FILE_ACCESS_INFO
FILE_SIZE = l_filesize.
mimetype = 'application/pdf'.
file_name = 'any name'.
binary_flg = 'X'.
FILE_CONTENT_BINARY
pass the binary content
RAW_MODE
X
package_id -> to create package id
CONSTANTS: c_objtype   TYPE skwf_ioty VALUE 'P',
           c_sign      TYPE sdok_qusgn VALUE 'I',
           c_op        TYPE sdok_cxop VALUE 'NX'.
           c_class     TYPE sdok_class VALUE 'BDS_POC1'.
DATA: appl TYPE skwf_appl.
DATA: cspc TYPE sdok_ent VALUE 'CRM'.
        CALL FUNCTION 'CRM_KW_BOR_SET'
          EXPORTING
            iv_business_object = business_object.
        ls_selectors-type = c_objtype.
        ls_selectors-attribute = 'LANGUAGE'.
        ls_selectors-sign      = c_sign.
        ls_selectors-op        = c_op.
        APPEND ls_selectors TO lt_selectors.
        ls_selectors-type = c_objtype.
        ls_selectors-attribute = 'BDS_DOCUMENTTYPE'.
        ls_selectors-sign      = c_sign.
        ls_selectors-op        = c_op.
        APPEND ls_selectors TO lt_selectors.
KW Framework: Context Treatment
        CALL FUNCTION 'SKWF_CTX_CREATE'
          EXPORTING
            context_class      = 'CRM_CTXCL'
            x_reduce_to_one    = reduce_to_one
            description        = 'Default Context'
            x_transient        = 'X'
          IMPORTING
            context_id         = lv_context_id
          TABLES
            instance_selectors = lt_selectors.
KW Framework: Package Handling
        CALL FUNCTION 'SKWF_PKG_DYNAMIC_CREATE'
          EXPORTING
            package_desc   = 'PAKET'
            x_transient    = 'X'
            appl           = appl
            cspc           = cspc
            context_id     = lv_context_id
          IMPORTING
            new_package_id = l_pkgid
            error          = l_error.

Is any different between ECC 5.0 and ECC 6.0 for Excel export?

Dear all,
As you know, most standard SAP report allow Excel export. I just wonder is any different between ECC 5.0 and ECC 6.0 for excel report in standard SAP reports?
In ECC 5.0, Reports in profit center accounting, LIS, or PA, etc. has their own different way to export to excel and is any improvement in ECC 6.0? I Thanks.

In ECC 5.0, a lot of reports don't have Excel export function instead user has to go to system -> List -> Save -> Local file -> spreadsheet.
I just wonder is any improvement in ECC 6.0? just like LIS report, user can select export -> Transfer XXL to either pivot table or just plain excel but the function only exist in certain reports in some modules and not all.
Thanks again.

Functionality wise comparision between ECC 5.0 and 6.0 for QM Module

Dear QM Experts,
Can anybody brief the comprehensive functionality wise comparision along with business benifits between ECC 5.0 and 6.0 for QM Module? For example, what are the diffrence for Quality Notification, Inspection plan, etc and other QM functionalities between 5.0 and 6.0.
Best Regards,
Anand Rao

Hi,
http://erp.fmpmedia.com/Default.aspx?alias=erp.fmpmedia.com/english
This link can be used for same.
Vishal

Integration between ECC PDF document and NW2004s portal ...

Similar Messages

Maybe you are looking for