Integration between EP & BW (with multiple application server)
Hello Experts,
We are configuring JCo Rfc Provider using visual administrator.
We have Successfully used Note No##Note 917950 - SAP NetWeaver 2004s:
Setting Up BEx Web,For Our Development & QAS BW & EP Server.(Single application Server)
But on our Production systems which have multiple application servers ( 3 each for EP & BW) at the step of creating RFC Creation we find that the RFC connection (JCO provider) only works when we specify the individual Apps server in the BW Host Field. We are not able to Specify the BW message server in the JCO Connection.
Kindly help us to resolve this issue.
With Regards,
Anshul
Hi Jim,
The reason that the documentation specifically spells out IBM Websphere is most likely because it was the application server that we developed and tested with at the time. The important requirement for this type of integration is that this server be an Intel based server running a Microsoft OS. The reason for this is because there are dlls with the Oracle IPM product that enable communication between the IPM functions and the JDE Business functions. If the Enterprise server for JDE is intel based then a JAS can exist on the same server, the dlls can be on that machine and the extra server is not required. This server is only required if the Enterprise server is not intel based. As far as your choice to use Oracle Application Server goes, I really have no basis to say if this works or not. My thought is that it shouldn't matter as long as the JAS server is an intel based, 32 bit server running a Microsoft OS. There are many other variables and lots of experience implementing this type of integration with JDE within the Oracle IPM consulting team. Give us a call if we can help.
Hope this helps,
Matt
Similar Messages
-
SNC configuration in multiple application server environment
Hello Experts,
We are planning for SNC configuration between ECC 6 and NW04s Portal systems.
ECC 6.0 is running with Central Instance and two application servers.
NW04s EP is running with 4 server nodes.
I am very much clear about setting up SNC between ABAP and JAVA running with single application server and server node.
But totally confused about SNC/SSL setup in multiple server environment. Would really appreciate if you can provide some ideas/docuements on setting up SNC/SSL in multiple server environment.
1. Do we need to create multiple PSE for each of the ABAP application server? If yes then would the CN should be same or different.
2. If we create only one PSE for central instance and copy this to other application server - will this work.
Looking forward to hear from your experiences.
Regards
DavinderHi,
Please check the link http://help.sap.com/saphelp_nw04/helpdata/en/69/b0bbd6dde71141bee8806586144796/frameset.htm
Regards,
Gowrinadh -
Dear gurus,
I have configured OID 10.1.4.0.1 and MRCA 10.1.4.0.1 on database 10.2.0.3 with Oracle Application Server 10.1.3.3 (HTTP Server and OC4J Server). it went well, i could login into my oid or sso page. then i deployed a simple jar file into OAS 10.1.3.3 and i updated few lines in mod_osso.conf on midtier 10.1.3.3, so it look like this :
==================================================================================================
LoadModule osso_module libexec/mod_osso.so
<IfModule mod_osso.c>
OssoConfigFile /u01/oraias/midtier/Apache/Apache/conf/osso/osso.conf
OssoIpCheck off
OssoIdleTimeout off
# Insert Protected Resources: (see Notes below for how to protect resources)
# Notes
# 1. Here's what you need to add to protect a resource,
# e.g. <ApacheServerRoot>/htdocs/private:
# <Location /private>
# require valid-user
# AuthType Basic
# </Location>
<Location /JABSUAT>
require valid-user
AuthType Basic
</Location>
<Location /HR>
require valid-user
AuthType Basic
</Location>
</IfModule>
# If you would like to have short hostnames redirected to
# fully qualified hostnames to allow clients that need
==================================================================================================
my application faces name is HR, so i called the URL http://devel.sas.co.id:7778/HR/faces/HomeMenu.jspx, the output was sso login page, so i did login with username : orcladmin and password : oracle1 but it turned me error page on browser, it said :
=========================================================
Internal Server Error
The server encountered an internal error or misconfiguration and was unable to complete your request.
Please contact the server administrator, [email protected] and inform them of the time the error occurred, and anything you might have done that may have caused the error.
More information about this error may be available in the server error log.
=========================================================
and i found that in /u02/oid/Apache/Apache/logs/error_log.1249430400 contains these lines :
[Wed Aug 5 09:13:33 2009] [notice] Accept mutex: fcntl (Default: sysvsem)
[Wed Aug 5 09:13:33 2009] [warn] long lost child came home! (pid 4924)
[Wed Aug 5 09:14:01 2009] [error] [client 172.16.2.14] [ecid: 1249438441:172.16.5.11:5080:0:2,0] File does not exist: /u02/oid/Apache/Apache/htdocs/favicon.ico
[Wed Aug 5 09:14:04 2009] [error] [client 172.16.2.14] [ecid: 1249438444:172.16.5.11:5068:0:3,0] File does not exist: /u02/oid/Apache/Apache/htdocs/favicon.ico
[Wed Aug 5 09:14:24 2009] [error] [client 172.16.2.14] [ecid: 1249438464:172.16.5.11:5093:0:2,0] \n[OSSO] E34: Unable to assure integrity of communication with SSO server.\n
[Wed Aug 5 09:49:36 2009] [error] [client 172.16.2.14] [ecid: 1249440576:172.16.5.11:5074:0:20,0] \n[OSSO] E34: Unable to assure integrity of communication with SSO server.\n
[Wed Aug 5 10:30:01 2009] [error] [client 172.16.2.14] [ecid: 1249443001:172.16.5.11:5096:0:25,0] \n[OSSO] E34: Unable to assure integrity of communication with SSO server.\n
[Wed Aug 5 10:34:13 2009] [error] [client 172.16.2.14] [ecid: 1249443253:172.16.5.11:5102:0:26,0] \n[OSSO] E34: Unable to assure integrity of communication with SSO server.\n
[Wed Aug 5 10:58:58 2009] [error] [client 172.16.2.14] [ecid: 1249444738:172.16.5.11:5093:0:40,0] File does not exist: /u02/oid/Apache/Apache/htdocs/favicon.ico
[Wed Aug 5 10:59:09 2009] [error] [client 172.16.2.14] [ecid: 1249444749:172.16.5.11:5093:0:41,0] \n[OSSO] E34: Unable to assure integrity of communication with SSO server.\n
Oracle-Application-Server-10g/10.1.2.0.2 Oracle-HTTP-Server Server at devel.sas.co.id Port 7782
Note : 172.16.2.14 is my pc and 172.16.5.11 is OID and MRCA's IP, please need your suggestion, Many Thanks.
Regards
Edited by: andes on Aug 4, 2009 9:23 PM
Edited by: andes on Aug 4, 2009 9:28 PMDear gurus,
i have solved my problem, i re-run ssoreg.sh and re-configure mod_osso.conf, now it's working.
Regards -
About integration between SAP and non-SAP applications via javaidoc classes
Hi,All
Now we are implementing a SAP-Retail project,we encounter a problem of integration between SAP and non-SAP applications(POS),we want to set Inbound/Outbound between SAP and POS applications realtimely,POS can connect to the SAP system via VPN,weather it can be implemented?
I conceive to implement it with SAP Java Connector IDoc Class,I don't know weather it is the best solution?If not,please give some other proposal.
I have download the classes from SAP website and try it with the samples provided by SAP(JCoIDocSample1.java/JCoIDocSample3.java),In my testing,Inbound is succeed,but,in SAP-Retail IS,standard Outbound message type is defined via file port,some one told me that SAP Java Connector IDoc Class can only receive idocs from tRFC port?is it true?If not,please tell me how to deploy in SAP so java program can receive idocs from file port?We too are interested in finding information on integration between SAP and Intergraph. Were you able to obtain information and I was wondering if could share this with us.
Thanks,
Sue
City of Edmonton -
Session cleanup issue with multiple Application servers
Hi ,
I am facing a strange problem with multiple application servers. The java Webdynro session does not get cleaned up completely when user closes the browser ( without using logoff ). On re-login it gets handle of old session and then fails for consecutive view on other webdynpro iviews with an invalid session error. It again starts working with a refresh event.
Any ideas/suggestion if you have seen something similar before ?
Thanks and regards,
Amit.Hi Amit
It seems that issues is not server related, but caused by your client browser. I know, for example, that IE8.0 keeps user session even if two separate browser instances opened on the same client machine. IE 7.0 and lower behave differently - they are separate user sessions per browser instance.
BR, Siarhei -
SP2013: Scaling search with multiple app server
Hi Team,
I am scaling a new SP environment with multiple App Server.
I have used AutoSPINstaller to install SP2013 and Search. My search components are spread across all servers. All Search components on all servers and I have a blank publishing site as part of my content source.
My issue is when i start full/Incremental crawl. It keeps on crawling for the whole day and do not produce any crawl error neither it stops. We waited for even 2 das but the crawl kept on going on.
Any help will be really appreciated.
Thanks Ba$vaHi Basva ,
Follow these steps (one at the time) to reset the Content Source crawl:
Start -> Run -> Services.msc -> Restart the “SharePoint Server Search 15”.
Make sure the Application Server Administration Service Timer Job working .
Navigate to Central Administration-> Manage service application->
Search Service Application,
Reset Index and see if that fixes the problems.
Go into the Services.msc on each server and change the "RECOVERY" method of the “SharePoint Server Search 15” from "FIRST FAILURE" to "TAKE NO ACTION" so that the service did not restart before
all the servers had their "SharePoint Server Search 14" stopped.
Best Regards,
Eric
Eric Tao
TechNet Community Support -
Hi all,
I'd like to know if it's possible and how to use JavaMail 1.4 with Oracle Application Server 10g (9.0.4.0.0), Windows version.
With the following code, I can see that the mail.jar used by the server is the one included in the jdk installation :
// I'm testing InternetAddress.class because I want to use commons-email-1.2.jar that requires mail.jar 1.4 (or higher) and activation.jar 1.1 (or higher)
// and I know that inside the commons-email-1.2.jar file, I need to call the InternetAddress.validate() method that throws a java.lang.NoSuchMethodError: javax.mail.internet.InternetAddress.validate()V if it is used with mail.jar 1.2.
Class cls = javax.mail.internet.InternetAddress.class;
java.security.ProtectionDomain pDomain = cls.getProtectionDomain();
java.security.CodeSource cSource = pDomain.getCodeSource();
java.net.URL location = cSource.getLocation();
System.out.println(location.toString());
This code returns : file:/C:/oracle/app/jdk/jre/lib/ext/mail.jar and this mail.jar file has an implementation version number: 1.2
- I've tried to include my own mail.jar (1.4.2) and activation.jar (1.1.1) files in the war file that I deploy, but it doesn't work (the server still uses the same mail.jar 1.2)
- I've tried to put the mail.jar (1.4.2) and activation.jar (1.1.1) files in the applib directory of my OC4J instance, but it doesn't work (the server still uses the same mail.jar 1.2)
- I know that a patch exists : I've read the following document: How to Make Libraries such as mail.jar and activation.jar Swappable ? [ID 552432.1]
This article talks about the Patch 6514136, but this patch only applies to : Oracle Containers for J2EE - Version: 10.1.3.3.0
Can you please help me ?
Thanks in advance for your answers,
LaurentI strongly suggest to upgrade to AS 10.1.3 to get this.
Think of future support of AS 9.0.4. You will get not critical patch updates anymore.
--olaf -
Problems with multiple applications crashing or not opening.
My computer has issues with multiple applications, which mostly are connected to itunes/ilife. iPhoto, iWeb, Front Row and iTunes all crash at certain points, but iMovie opens fine, although I haven't tested anything within it other than playback. YouControlTunes (an iTunes controller) also has issues. Reinstalling the OS has made no difference, nor has reinstalling iTunes. I will try reinstalling iLife (again).
iTunes did work after reinstalling the OS the first time after trashing iTunes and iLife and other applications that used up hard drive space (was running low so wanted to make sure Mac OS X installed fine), but after reinstalling iLife and Firefox and other applications then iTunes stopped working again. Garageband and iDVD weren't reinstalled.
I shall try trashing the iTunes library.
Also, the application Mactracker and the installers for 1.0.4 & 1.0.5 of Age of Empires III did not work, so the problem is presumably not iLife.There are some simple troubleshooting steps you can take.
Be sure you drive is not overly full. Rule of thumb would be over 85%.
Create a new User go to System Preferences >> Accounts >> "+" (make it an admin acct) and test the apps in this new account, if they work the problem is isolated to your User and not systemwide.
If the issue is limited to your user account try starting up Safe Mode (It will take more time to startup in Safe Mode because it runs a directory check.)
If your apps functions correctly that way, go to System Preferences >> Accounts >> Login Items, and remove them. Boot normally and test. If not go to ~(yourHome)/Library/Contextual Menu Items and move whatever is there to the desktop. Then do the same with /Library/Contextual Menu Items. Lastly, try moving ~(yourHome)/Library/Fonts to your desktop and restarting.
Log out/in or restart, if that sorts it start putting items back one at a time until you find the culprit.
If the issue is systemwide then, you may be able to repair this with the The 10.6.3 Combo Update This is a fuller install, as opposed to an incremental "delta" update so it should overwrite any files that are damaged or missing. It does not matter if you have applied it before.
Remember to Verify Disk before update and repair permissions after update from /Applications/Utilities/Disk Utility.
-mj -
Is Oracle E-Business Suite 12.1.3 certified with Oracle Application Server
Is Oracle E-Business Suite 12.1.3 certified with Oracle Application Server Single Signon 10.1.4.3.0 on Linux x86-64 SLES 11 (not SLES 10) ?
I do see Oracle Application Server Single Signon 10.1.4.3.0 listed on the certification matrix for R12.1.3 , however when I click on the OAS, it does not list SLES 11 , it only lists SLES10
Database is 11.2.0.3.0
https://support.oracle.com/epmos/faces/ui/certify/CertifyHome.jspx?_adf.ctrl-state=bxnumz1z8_277&_afrLoop=862843359573928
Please advise ?
Thanks!
Edited by: userAnne on Sep 25, 2012 11:11 AM
Edited by: userAnne on Sep 25, 2012 11:20 AMuserAnne wrote:
Is Oracle E-Business Suite 12.1.3 certified with Oracle Application Server Single Signon 10.1.4.3.0 on Linux x86-64 SLES 11 (not SLES 10) ?
I do see Oracle Application Server Single Signon 10.1.4.3.0 listed on the certification matrix for R12.1.3 , however when I click on the OAS, it does not list SLES 11 , it only lists SLES10
Database is 11.2.0.3.0
https://support.oracle.com/epmos/faces/ui/certify/CertifyHome.jspx?_adf.ctrl-state=bxnumz1z8_277&_afrLoop=862843359573928
Please advise ?
Thanks!Oracle E-Business Suite 12.1.3 is certified on SLES 11 (64-bit).
Oracle Application Server Single Signon 10.1.4.3.0 is certified on SLES 9/10 only and it is not certified on SLES 11 for (64-bit).
Thanks,
Hussein -
Anybody help on integration between IS-RETAIL and CRM application?
hello experts!!
anybody help on how is the business process (or) functionality between IS-RETAIL and CRM application?
i mean integration between IS-RETAIL and CRM application.......Hi Subha
Since IS-Retail is an Industrial Solution package which was built above the Baseline package,all the Business processes which were there in 4.7 is supported by IS - Retail. You can access the Retail Menu in W10T and S000 for your normal Menu in ECC6..
Regards
Anis -
Issue listeneing queue from Weblogic Cluster server with multiple managed server
Haveing issue listeneing queue from Weblogic Cluster server with multiple managed server.
Weblogic Cluster structure is like
Weblogic Cluster01
--ManagedServer01(http://server01.myhost.com:7001)
--ManagedServer02(http://server02.myhost.com:7001)
JMS Servers
JMSserver01 targeting: ManagedServer01
JMSserver02 targeting: ManagedServer02
JMSmodule
ConnectionFactory01 targeting:JMSserver01,JMSserver02
UDQueue01 targeting:JMSserver01,JMSserver02
Uniform Distributed Queue in Monitoring tab showing like this
mysystemmodule!JMSserver01@UDQueue01
mysystemmodule!JMSserver02@UDQueue01
So when I am sending message to any Host(by specifying the provider URL) its distributing equally on both server like
mysystemmodule!JMSserver01@UDQueue01 10
mysystemmodule!JMSserver02@UDQueue01 10
But when try to listen message from these queue, it is listening from one server, for which URL given to connect.
mysystemmodule!JMSserver01@UDQueue01 0
mysystemmodule!JMSserver02@UDQueue01 10
untill I connect to other server by giveing its URL, will not able to access other message left on the queue.
Solutions that tried
1) we have tried give both server URL coma sparated in provider URL
we need to configur same scenario for 5 managed server with 3 listener on other servers.
Do any one have solution for this.You need to have:
1. Consumers connected to each UDQ member
OR
2. If no consumers in some of the members is expected, you can configure Forward Delay (specify the amount of time, in seconds, that a queue member with messages, but with no consumers, will wait before forwarding its messages to other queue members that do have consumers):
http://docs.oracle.com/cd/E12839_01/apirefs.1111/e13952/taskhelp/jms_modules/distributed_queues/ConfigureUDQGeneral.html
For example you can set it to 10 (10s)
Additional Information here:
http://docs.oracle.com/cd/E23943_01/web.1111/e13727/dds.htm#i1314228
http://docs.oracle.com/cd/E23943_01/apirefs.1111/e13951/mbeans/DistributedQueueBean.html?skipReload=true#ForwardDelay
How Does JMS Load Balancing Work with Distributed Queues and Uniform Distributed Queues? (Doc ID 827294.1)
I hope this helps
Best Regards
Luz -
Problem with multiple applications using one audio output
Hey there, I'm having issues setting up my 5.1 headset seen here (http://www.sharkoon.com/?q=en/content/x-tatic-digital) to work with multiple applications.
Right now I have audio streaming from a flash video, when I try run "$ speaker-test -c 6" I get the following error:
speaker-test 1.0.25
Playback device is default
Stream parameters are 48000Hz, S16_LE, 6 channels
Using 16 octaves of pink noise
ALSA lib pcm_dmix.c:1018:(snd_pcm_dmix_open) unable to open slave
Playback open error: -16,Device or resource busy
If I try open another application which uses this device, the first application has its sound cut off.
2 more things to note:
- My preference for setup would be audio output through S/PDIF and input through USB, with the USB output disabled (To not waste system resources).
- I unmuted all channels in ALSA, however when I ran the test only 2 channels seemed to be working (Front L&R), it may have been defaulting to the USB connection, in which case, that explains only 2 channels being in use, is there a method of setting the S/PDIF as default system wide?
Thanks in advance for any help given!brebs wrote:It's put the comments on multiple lines - fix that.
Woops, I guess my paste messed up, new .asoundrc: http://pastie.org/3706033
I can run both at the same time, however I cannot hear any audio. Do I somehow have to change the default device, if so how can I do that?
Edit:
Restarted system now I get:
speaker-test 1.0.25
Playback device is default
Stream parameters are 48000Hz, S16_LE, 2 channels
Using 16 octaves of pink noise
Rate set to 48000Hz (requested 48000Hz)
Buffer size range from 2048 to 8192
Period size range from 1024 to 1024
Using max buffer size 8192
Periods = 4
was set period_size = 1024
was set buffer_size = 8192
0 - Front Left
Segmentation fault
(That's with both commands)
EDIT 2:
Interesting, apparently 2 audio streams are working, however the console thing still doesn't work..?
EDIT 3:
Didn't last long, now flash crashes and html 5 doesn't work -.-
EDIT 4:
Flash only works when other audio is active, however it has constant popping sound. I went through the system logs to get the errors of when flash crashes, it's audio crashing it, here's the error:
Apr 1 02:04:15 localhost kernel: [ 7057.499787] AudioThread[6227]: segfault at 7f2e2f7a8008 ip 00007f2e413a2786 sp 00007f2e33614ae8 error 7 in libasound.so.2.0.0[7f2e4131e000+eb000]
Last edited by B3NW (2012-04-01 01:11:04) -
Help me with Report Application Server SDK
Please, I need help with Report Application Server SDK.
public static void rpt2xml(ReportClientDocument rcd) {
IXMLExportFormat xmlExportFormat = new XMLExportFormat();
XMLExportFormats xmlExportFormats = new XMLExportFormats();
IXMLExportFormatOptions xmlExpFormatOpts = new XMLExportFormatOptions();
PrintOutputController rcdPrint = rcd.getPrintOutputController();
xmlExportFormats = rcdPrint.getSavedXMLExportFormats(); // <------ ERROR HERE
//" This method is undefined
// for the type PrintOutpupController", ¿why?
int index = xmlExportFormats.getDefaultExportSelection();
xmlExpFormatOpts.setXMLExportSelection(index);
xmlExportFormat = xmlExportFormats.getXMLExportFormat(index);
Edited by: Diego XMunch on Mar 1, 2011 3:35 PMI819738 wrote:
Ok, so you do have the right version of Crystal Reports. I would like to see which assemblies you have referenced in your project and their assembly versions. Might also be good to list your imports/using statements as well.
Hi, I´m trying to use Report Engine SDK buy I have this error:
com.businessobjects.rebean.wi.ServerException: Error interno al llamar a la API 'openDocumentMDP'. (Error: ERR_WIS_30270)
at com.businessobjects.rebean.wi.occa.OccaDocumentComAdapter.checkOpenDocError(Unknown Source)
at com.businessobjects.rebean.wi.occa.OccaDocumentComAdapter.openDocument(Unknown Source)
at com.businessobjects.rebean.occa.OccaReportEngineComAdapter.openDocument(Unknown Source)
at com.businessobjects.rebean.wi.ReportEngineImpl.openDocument(Unknown Source)
at com.businessobjects.rebean.wi.occa.WebiReportEngine.openDocument(Unknown Source)
at org.apache.jsp.login_jsp._jspService(login_jsp.java:163)
at org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.java:97)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:802)
at org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:334)
at org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:314)
at org.apache.jasper.servlet.JspServlet.service(JspServlet.java:264)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:802)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:252)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:173)
at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:213)
at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:178)
at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:126)
at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:105)
at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:107)
at org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:148)
at org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:869)
at org.apache.coyote.http11.Http11BaseProtocol$Http11ConnectionHandler.processConnection(Http11BaseProtocol.java:664)
at org.apache.tomcat.util.net.PoolTcpEndpoint.processSocket(PoolTcpEndpoint.java:527)
at org.apache.tomcat.util.net.LeaderFollowerWorkerThread.runIt(LeaderFollowerWorkerThread.java:80)
at org.apache.tomcat.util.threads.ThreadPool$ControlRunnable.run(ThreadPool.java:684)
at java.lang.Thread.run(Thread.java:619)
Edited by: Diego XMunch on Mar 10, 2011 3:37 PM -
Installing Forms&Report Services with Oracle Application Server 10g Rel 3
Can I Install Forms & Report Services with Oracle Application Server 10g Release 3 some how?
I am thinking of installing Forms & Reports Services in separate home with Oracle Application Server 10g Rel 3.
Does any body has any different idea so that they both can run more smoothly together.
Thanks
Raj
www.oraclebrains.comThey WILL NOT RUN TOGETHER. We have discussed this many times before. They must be in separate homes.
Check the search function for this forum to find the previous discussions. -
I/PM ERP Integration with Oracle Application Server instead of Websphere
I'm just starting an integration between IPM 7.7.1 and JDE EnterpriseOne v8.12.
In the EIS documentation for 7.7.1 has some specific assumptions regarding integrations with JDE EnterpriseOne (8.12), specifically using IBM Websphere. We opted to go with the Oracle Portal and Oracle Application Server. Just curious if the integration approach/instructions would require some adjustments because of the non-Websphere selection my JDE team chose. Or if it just plan won't work.
JimHi Jim,
The reason that the documentation specifically spells out IBM Websphere is most likely because it was the application server that we developed and tested with at the time. The important requirement for this type of integration is that this server be an Intel based server running a Microsoft OS. The reason for this is because there are dlls with the Oracle IPM product that enable communication between the IPM functions and the JDE Business functions. If the Enterprise server for JDE is intel based then a JAS can exist on the same server, the dlls can be on that machine and the extra server is not required. This server is only required if the Enterprise server is not intel based. As far as your choice to use Oracle Application Server goes, I really have no basis to say if this works or not. My thought is that it shouldn't matter as long as the JAS server is an intel based, 32 bit server running a Microsoft OS. There are many other variables and lots of experience implementing this type of integration with JDE within the Oracle IPM consulting team. Give us a call if we can help.
Hope this helps,
Matt
Maybe you are looking for
-
My location bar, tool bar (file, edit, tools, bookmarks, help) all disappeared and cannot be restored. I have no back button, home button etc. the top of the screen is just an empty blue bar. Internet still works if I click on a hyperlink on the main
-
No update can improve speed on Quad 6600?..
Have I, as an owner of a G5 Quad with a NVidia 6600-video card, understood this correctly: 1. Aperture relies heavily on videocard performance, as opposed to Light Room, Photoshop, Canon DPP etc. 2. The NVidia 6600 is not sufficent for Aperture to ru
-
Create an outbound flat file .txt file from SAP to UAPM.
How to Create an outbound flat file .txt file from SAP to UAPM (Unicenter Asset Portfolio Management).
-
Offline Files: Win 7 client - Encrypt files only went halfway, now neither?
Hi all. I was just doing some testing with this Offline Files feature. This is my first time testing some of the additional management options for it. Client is Win 7 Pro (64bit), server is 2008 R2 and AD is a basic single-server type design (a fe
-
I am having problems using a custom view handler with my JSF 2.0 web application. The custom view handler worked fine under JSF 1.2, but now when the application is configured to use this handler, I get an IndexOutOfBoundsException as soon as I click