Integration between FCPX and Motion ?
How do I move from/to the two softwares to edit a clip already in my timeline and have it back once edited ?
Thanks
You create in Motion, publish it as a Final Cut Generator. It shows up in the Generators palette in FCP X. You then edit it in Motion by right-clicking on the generator and selecting Open In Motion. You do your edit in Motion, save it, go back to FCP X, drag the generator over the existing one in the timeline to replace. I have no clue why it just doesn't update it in the timeline for you.
It's funny because the integration of FCP X and Motion 5 is way more advanced than After Effects and Premiere Pro because of rigging and publishing (very powerful stuff) but it doesn't do true roundtripping.
Robbie75VRI wrote:
what I need is some "connection", when I edit in motion I want to see the updated files in my fcpx timeline, just like premiere and after effects... I think that's not possible
Similar Messages
-
Best way to move files between FCPX and Motion?
What is the best protocol for bringing files back and forth between Motion and FCPX?
How do I save out from Motion for import to FCP? Is it with Templates?
Whats the drill?
I have looked at both the helps and am coming up short.
Thanks.If you're simply working in generic Motion project, ProRes 422 Quicktime files are the best format for going back and forth.
If you want to save a Motion project to use as a template in FCP X, it has to be one of the template Motion project types. Title, Generator, Effect, Transition. You would select these from the Template Browser that opens first when Motion is initially launched.
If you want to start creating templates, I stronly recommend Ripple Training's "Rigging and Publising" video course for Motion 5. -
How do i transfer videos between FCPX and Motion 5?
there is no "Send To" option. The only option i have is under "Share" and it is "Send to Compressor"
Basically, the only work-around is to create a new project containing the exact clip (or section of a clip) you want to "send" to motion, export that project (to quicktime), then open that exported .mov in motion. Do whatever you want to do to it. Then, export the motion project to quicktime. Finally add that result to your FCPX event/timeline where you want it.
We can only hope that Apple will add back the "Send to Motion" feature and rectify this glaring inadequacy. -
Fonts get switched between FCPX and Compressor
I edit my video, make some simple intro and outro titles with specific fonts (Gill Sans, Adobe Garamond Pro) and although the fonts look fine in Final Cut Pro X when I send the video to Compressor 4 FCPX swaps out the fonts. It's driving me nuts.
I've run Font Book and verified the fonts and they pass. I've done the share to Compressor twice and both times it swapped out the fonts, each time for different fonts.
Anyone have this problem or have a solution?
The video I'm editing hasn't been brought in and optimized, it's H.264 video in place, no audio. Very frustrating.
Here's a link to the video, you can see three different types of fonts due to the fonts being lost between FCPX and C4. http://www.hawaii247.com/?p=56608I spoke with Apple Tech support, the first line told me if I had Adobe CS 5 installed on my system it would break the fonts, and suggested I create a new user, install fcpx under that user, and do my editing from there. I asked to have the case escalated.
The second line tech support indicated they have had no reports of this issue, however he was able to duplicate the problem 100% of the time using his "clean system" running Snow Leopard. He said he woulde further escalate the bug to the engineers.
As as work around he suggested I creat all titles in motion (alpha chanel only) and then bring into fcpx as a .mov file. Great, I only have a few hundred titles..
I suggest every user that is experiancing this either make a bug report via FCPX or call apple tech support and report it, otherwise it might be way down on the list of fixes.
So it is a bug, and has nothing to do with fonts, prefs, or Adobe products. -
Is it a Bug? Integration between Dreamweaver and Fireworks is broken in somewhere?
I can not upload images related my topic here but you can see
it in the same topic at
http://www.fireworksguruforum.com/index.php?showtopic=14282
I use CS3 Suite. It is a big trouble for me in working on
real pages. Integration is broken in somewhere else and after that
point it becomes impossible to work on Fireworks through
Dreamweaver.
I've made test to show this trouble and I narrowed the
problem to the pictures as shown in the figures below,
1) In figure one I am creating a completely new Fireworks
file as arrow.png with two frames and one slice in it. After I am
saving it as .png I am exporting it as .html with images in /images
subfolder.
2) After saving and closing the file in Fireworks, in figure
two, I am opening the html in Dreamweaver and changing the page
properties by writing zeros to page margins and by changing the
default font.
-----I guess in this point something happens which breaks the
integration between FW and DW--------because;
3) In figure three I am opening the .png through Dreamweaver
(by "Edit") and changes the place and size of the slice a little
bit
4) When I press Done in Fireworks I see this picture in
figure four in Dreamweaver which shows integration between FW and
DW about table structure is broken. (In this point if I add any
behaviur to the slice DW doesn't recognize it, or any other change
in FW can not be recognized by DW)
5) In order to show this broken integration in table
sturucture, I am putting a new slice to png when Editing from DW in
FW.
6) When I click on Done in DW I see this picture on the
figure six. Beacuse FW doesn't have any effect on html's table
structure code.
I can not upload images related my topic here but you can see
it in the same topic at
http://www.fireworksguruforum.com/index.php?showtopic=14282damlays wrote:
> I can not upload images related my topic here but you
can see it in the same
> topic at
>
http://www.fireworksguruforum.com/index.php?showtopic=14282
>
>
> I use CS3 Suite. It is a big trouble for me in working
on real pages.
> Integration is broken in somewhere else and after that
point it becomes
> impossible to work on Fireworks through Dreamweaver.
>
> I've made test to show this trouble and I narrowed the
problem to the pictures
> as shown in the figures below,
>
> 1) In figure one I am creating a completely new
Fireworks file as arrow.png
> with two frames and one slice in it. After I am saving
it as .png I am
> exporting it as .html with images in /images subfolder.
>
> 2) After saving and closing the file in Fireworks, in
figure two, I am opening
> the html in Dreamweaver and changing the page properties
by writing zeros to
> page margins and by changing the default font.
>
> -----I guess in this point something happens which
breaks the integration
> between FW and DW--------because;
>
> 3) In figure three I am opening the .png through
Dreamweaver (by "Edit") and
> changes the place and size of the slice a little bit
>
> 4) When I press Done in Fireworks I see this picture in
figure four in
> Dreamweaver which shows integration between FW and DW
about table structure is
> broken. (In this point if I add any behaviur to the
slice DW doesn't recognize
> it, or any other change in FW can not be recognized by
DW)
>
> 5) In order to show this broken integration in table
sturucture, I am putting
> a new slice to png when Editing from DW in FW.
>
> 6) When I click on Done in DW I see this picture on the
figure six. Beacuse FW
> doesn't have any effect on html's table structure code.
>
>
> I can not upload images related my topic here but you
can see it in the same
> topic at
>
http://www.fireworksguruforum.com/index.php?showtopic=14282
>
>
>
I can reproduce your results, but I don't consider this a
bug; just a
limitation of Roundtrip editing.
You can't add or change slices without re-exporting the html
from
Fireworks. Roundtrip is for image editing, not for altering
the table
structure. If I edit, and re-export, my table remains intact.
If you want to edit the slices and resulting html, open the
PNG file
independently of Dreamweaver, change your slices and images
and then
choose File > Update HTML (this option is not available
when in
Roundtrip mode). FW will ask you to locate the html file.
When located,
you will have the options of
Replace Images and Their HTML - replaces the previous
Fireworks HTML.
Update Images Only - overwrites only the images.
As an aside, the rigid table created by FW is rarely
desirable for a
production web site.
HTH
Jim Babbage - .:Community MX:. & .:Adobe Community
Expert:.
http://www.communityMX.com/
CommunityMX - Free Resources:
http://www.communitymx.com/free.cfm
.:Adobe Community Expert for Fireworks:.
Adobe Community Expert
http://tinyurl.com/2a7dyp
.:Author:.
Lynda.com -
http://movielibrary.lynda.com/authors/author/?aid=188
Peachpit Press -
http://www.peachpit.com/authors/bio.aspx?a=d98ed798-5ef0-45a8-a70d-4b35fa14c9a4
Layers Magazine -
http://www.layersmagazine.com/author/jim-babbage -
Can any one send procedure for integration between XI and Geographic inform
can any one send procedure for integration between XI and Geographic information System(GIS).
Please clarify ASAP..
ThanksHi,
Please see the below links
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/d53af8ca-0801-0010-08b0-dce9e02130a8
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/d53af8ca-0801-0010-08b0-dce9e02130a8
GIS VS XI
Regards
Chilla..
Points rewarded if it is usefull..<i></i> -
How does the integration between CRM and SD occur
How does the integration between CRM and SD occur? Is only via ALE and are there config steps in CRM to ensure the correct data mapping between CRM and SD?
So, if I create an order or quote in CRM how is it then created in SD? Or do they share the same data store.
thanksHi John,
Here is good documentation regarding Data Exchange for Sales Transactions: the CRM Enterprise and the ERP System are two different repositories, If you create the Sales Order in CRM then they will be replicated into SD (using CRM Middleware, BDoc's)
http://help.sap.com/saphelp_crm60/helpdata/en/52/2d0c38941e5666e10000009b38f8cf/frameset.htm
Also you can check the best practice guide for CRM 2007 there you have plenty of information
http://help.sap.com/bp_crmv12007/CRM_DE/HTML/index.htm
Hope this help,
Regards,
Ramon -
Business Process & Integration between FI and CML
Hi,
Could you please brief about Business Process & Integration between FI and CML.
Thanks in advance
PrabhakarAny Inputs please for CML
-
hai sap family memebers,
Can anybody lit me the integration between hr and sd
as per as my knowledge
xd02--> we can integrate hr an sd
if any thing new plz let me know
all the best
madhuHi Madhu,
I think Integration will also happen through Infotype 0900 (Sales Data).
Here we will assign Employee to Sales Organization, Sales Office and Sales Group
Thanks
Uday -
About integration between SAP and non-SAP applications via javaidoc classes
Hi,All
Now we are implementing a SAP-Retail project,we encounter a problem of integration between SAP and non-SAP applications(POS),we want to set Inbound/Outbound between SAP and POS applications realtimely,POS can connect to the SAP system via VPN,weather it can be implemented?
I conceive to implement it with SAP Java Connector IDoc Class,I don't know weather it is the best solution?If not,please give some other proposal.
I have download the classes from SAP website and try it with the samples provided by SAP(JCoIDocSample1.java/JCoIDocSample3.java),In my testing,Inbound is succeed,but,in SAP-Retail IS,standard Outbound message type is defined via file port,some one told me that SAP Java Connector IDoc Class can only receive idocs from tRFC port?is it true?If not,please tell me how to deploy in SAP so java program can receive idocs from file port?We too are interested in finding information on integration between SAP and Intergraph. Were you able to obtain information and I was wondering if could share this with us.
Thanks,
Sue
City of Edmonton -
Session variable filters in the integration between OBIEE and webcenter
Hello All,
I have a customer with the requirement to make sure that reports created in answers and containing sessions variables in filters definition will be correctly filtered once called from webcenter.
So if an OBI report is diplayed in webcenter and contains the same type of filters (based on session variable), will the results be filtered based on the specified variable?
In other words can we use session variables in the integration between OBIEE and webcenter?
Thanks OlayinkaHave you follow all the steps written here :
http://download.oracle.com/docs/cd/E10415_01/doc/bi.1013/e12188/T421739T475591.htm#T480640
Do you have create the groups ?
Do you connect as a member of the group XMLP_ADMIN ?
Cheers
Nico -
Custom Integration between CLM and SRM
Hi
Can any body help me how to do custom integration between CLM 2.0 and SRM for contracts using PI. On SRM side we have customised API. More specifically I need what is to be done in PI for custom integration between CLM and SRM.
Thanks in Advance
M G REDDYHi There,
Has anybody managed to custom integrate CLM & SRM?
If so please kindly share how this was achieved.
Thanks,
Sheena -
Integration between Finance and service management
Hi,
Does anybody know integration between Finance and Service management? If you have any documentation please send to [email protected] It is urgent!! Please help me I will reward you with points.
Thanks,
NeeliHello
Check this link.
http://help.sap.com/erp2005_ehp_02/helpdata/en/3c/05ce40c3e10366e10000000a1550b0/frameset.htm
Reg
*assign points if useful -
Integration between SAP and third party tax software
can some body explain me or provide me docs regarding integration between sap and third party tax software like vertex.
ThanksHi
First configure the same via the following menu path:
1.) IMG>Financial accounting>Financial accounting global settings>Taxes on sales/purchases>Basic settings>External tax calculation>Define physical destination
2.) Then test connection (option is available there).
3.) If the connection is successful, also verify that the external tax package installed supports the R/3 4.6 version of the API. You do that by going to:
System Information>Function List
Check if the following functions are listed:
RFC_CALCULATE_TAXES_DOC
RFC_UPDATE_TAXES_DOC
RFC_FORCE_TAXES_DOC
RFC_DETERMINE_JURISDICTION
4.) Then test the tax data retrieval:
From SE37, select the relevant function modules like RFC_DETERMINE_JURISDICTION.
The above 4 steps are necessary to satisfy that the RFC connection is established
Hope useful
S Jayaram -
About integration between hr and mm
hai sap friends,
As per my knowledge integration between Hr and mm
the transaction code is "oowiz5" and "oomm"
that means if Training and Event management is implemented, integration happens otherwise
In any way any scenaio plz
thanks in advance
madhuApart from Travel MMis integrated with Time Management
Valuating work performed by external employees, and monitoring them in Purchasing
Maybe you are looking for
-
Need help on Consolidation at higher level of hierarchy
Hi gurus, I have a scenario where in I need to load one cube from other cube. The first cube has geography stored at lowest level i.e. country level. I need to load data in other cube by consolidating at region level. Hierarchyu2019s a
-
Hoping a tech Whiz can solve my Xmas blues. Mac boots up but about 1min into boot up the system powers off. I have tried all of the reset and restart options in the manual to no avail. I have used the utility disk but it returns an error after 30secs
-
Integrating a little Flash in Dreamweaver
Hello All, I am a newbie and just finished a Flash class. However we didn't hardly talk at all about integrating Flash with Dreamweaver. What I want to do is create an intro page that has Flash and then you have to click on a Button to go into the ma
-
Synch to iPad from Photoshop Album
When I synch photos to iPad using Photoshop Album not all my photos synch. They were all taken with teh same camera & are the same size. I thought maybe the ones I edited were not synching, but that's not so. I have 63 photos in an album adn only 34
-
Connection problems after waking from sleep????
I'm having a strange issue with my 2012 Macbook Pro running OSx v10.8. I take my computer with me between home and school, and I usually just put it to sleep during the commute. For the last few weeks, when I got to school and woke up my MBP, it woul