Integration between organizational management and personnel administration

Dear Sirs/Madams,
I am trying to integrate organizational management and personnel administration to have see positions, jobs, and units which are assigned in PPOME. I made some configuration in T77SO and correct the needed integration in PLOGI position and especially for ORGA.
Nevertheless, the integration problems did not solve. Now, I was wondering if you would mind helping me in this case.
Thanks for your considerations,
Kind Regards,
Mohammad Hassan Salmani.

To set up/fix full integration between PA and PD, run below reports in this sequence:
1. RHINTE00 – Transfer PA records into PD positions –batch
2. RHINTE20 – Create OM objects in PA tables – Online
3. RHINTE30 – Bulk update of infotype 0001
4. RHINTECHECK – Program to check PA to PD
5. RHCHECKV - Checks all inverse relationships
Also,It is important to realize that in PA, there are tables that contain objects from OM, i.e. for those items displayed on infotype 0001 Organizational Assignment. Sometimes the tables can get ‘out of step’ with those in PD – table HRP1000. Check those as well. The tables are:
T513,T513S  Object type C (Job)
T528B,T528T Object types S (Position) and A (Work center)
T527X Object type O (Organizational unit)
Regards,
Mukesh

Similar Messages

  • Integration between Soluiotn Manager and HP Quality Center

    Hi Folks,
    I am currently configuring the integration between Solution Manager and HP Quality Center, and during the set up of communication user, I get the following error:
    User hpqc_comm is not authorized to access projects
    Message no. QC_INTEGRATION016
    Diagnosis
    You want to access projects in the Quality Center with the communication user hpqc_comm. This causes an error because the user either does not exist in the Quality Center or is not assigned to any project.
    Procedure
    Check whether the user hpqc_comm is in the Quality Center, and whether it is assigned to at least one project. Ask the Quality Center administrator to create the user and assign it to projects, if necessary.
    You can use another user for the communication
    Well, I have created that user in HPQC and assigned it to projects.
    Thanks for your help
    Marco

    the error is in Solution Manager. I am defining the communication parameters in SOLAR_PROJECT_ADMIN / <selected project> / edit / Connection to HP Quality Center. I choose the corresponding project in Quality Center, but when I validate the screen, I get the error I mentioned before, even though the communication user exists in HPQC and is assigned to that specific project.
    Thanks for your reply.
    Marco

  • Integration between case management and C-folder

    Dear Experts ,
    Can you help regarding integration between Case Managment and C-folder ???
    Kind Regards

    Hi,
    Simple answer: There is no specific integration existing.
    Case Management is using DMS as one option to save documents like Word, Excel.
    The cFolders solution is normally on a separate server and DMS documents can be checked out from the content server to cFolders and vice versa in SAP standard.
    I have experience from both solutions and I really don't see how these two solutions should be linked to each other from a business perspective.
    Regards, Johan

  • Integration between Time Management and Payroll

    I configured Time Management and Payroll....
    Before It created a problem in time management in absence quotas...
    for testing payroll I deactivated schema DAYPR that is time data processing....
    Generated absence quotas correctly
    Now I activated DAYPR still in display log i dont see any integration with time management....
    I changed the time management status to 7 and 9
    still its not integrating with Time Management
    what is that I want to do to integrate time management with payroll

    Payroll is not integrating with Time Management
    In Log I can see   No Time Management Integration
    I configured Time Management and Payroll....
    Before It created a problem in time management in absence quotas... it throwed an error in DAPPR
    for testing payroll I deactivated schema DAYPR that is time data processing....
    Generated absence quotas correctly
    Now I activated DAYPR still in display log i dont see any integration with time management....
    I changed the time management status to 7 and 9
    Payroll is running with out time management
    still its not integrating with Time Management
    l

  • Difference between remote management and vnc

    Difference between remote management and vnc

    By VNC I will presume you mean 'Screen Sharing'.
    Screen Sharing in System Preferences - Sharing is purely for remote control and is based on the VNC protocol with a few extra features added by Apple.
    Remote Management in System Preferences does everything Screen Sharing does and is fully compatible with another Mac doing just Screen Sharing, i.e. it allows remote control. However it can also do additional things. It is intended for use with Apple's Remote Desktop Administration software which can use this to send files to a Mac, send (Unix) commands to a Mac and ask for a report from the Mac (e.g. how much RAM it has).
    If you don't have Apple Remote Desktop there is no real point enabling Remote Management instead of Screen Sharing.
    Both Screen Sharing and Remote Management can also be configured to allow 100% standard VNC connectivity from say a PC, as standard they only accept connections from Macs.

  • Regd : Integration Between Portal Layer And Process Layer

    Hi Experts,
       I have a query regarding the integration between Portal layer and the process layer in CE. How does the interaction happens or what is the process behind the integration of these two layers. I was going through some help documents at help.sap.com.
    But from there I could not get much of information. So need your inputs on the same.
    Thanks
    Pradipta Kumar Mishra

    Hi Pradipta,
    If you are referring to Guided Procedures as the "Process Layer", then you have one of the three options that I can think of:
    1) Deliver the GP processes via UWL in CE Portal
    2) Deliver the GP processes via UWL in EP (if your organization has one)
    3) Delvier the GP processes via GP Runtime in CE Portal
    Of the three mentioned above, option 2 is preferred since your business users get to access their tasks via a single interface. But you need a EP. If that's not the case, I would suggest Option 1. For integrating GP and UWL, please refer to following link.
    http://help.sap.com/saphelp_nwce10/helpdata/en/43/ef06a7860c7061e10000000a1553f6/frameset.htm
    Thanks!
    - Rao

  • Integration between SAP HR and PS (Project System)

    Hi Guys,
    Is there any integration between Project System and HR in SAP. My client is service oriented company.
    Every month New customers will join and each customer they call it as one project & maintain in PS. Now my client requirement is, through PS recruitment requisition should have to come to HR (For ex XYZ customer requires 2 Supervisors, 1 Manager), so that HR will recruit employees for the project.
    So is there any integration between PS & HR
    Regards
    Prasad

    Hi Vikram Patil,
    In my client place we are not implementing SAP Payroll, hence if any new project is created in PS, I need only man power requirement from PS, how can I proceed now
    If is there any documents on PS and HR integration please forward to my mail ID
    [email protected]
    Regards
    Prasad

  • Lost connection between ovm-manager and ovm-server (ovm 3.1)

    Hi,
    I have a manager as a VM on my laptop and a physical server as an ovm-server. Everything is fine when i boot the server but after some time, the manager stop to show the information from the server. in the ovs-agent log file the following messages are repeated regulary
    [2013-08-29 13:06:19 6160] DEBUG (notification:289) Trying to connect to manager.
    [2013-08-29 13:06:20 6160] DEBUG (notification:291) Connected to manager.
    [2013-08-29 13:06:20 6160] ERROR (notification:316) No manager Core API server object for 10:60:4b:88:bc:24:10:60:4b:88:bc:25:fe:ff:ff:ff.
    [2013-08-29 13:06:34 6171] ERROR (notification:64) Unable to send notification: (111, 'Connection refused')
    I did not reboot neither the server nor the manager. No IP change. Rebooting the manager has no effect.
    The only way to restore communication is to restart the ovs-agent on the server, but this restart disable the network card. I must be physical on the server to restart the network.
    any help will be very helpful
    best regards
    Jean-Marc

    Hi,
    The are many steps to verify:
    Verify with your firewall on the Oracle VM Manager system (service iptables stop).
    Verify with a ping between OVM Manager and OVM Server using the IP Address and using the hostname for each one (from OVM Manager : ping ovm-server ; and from OVM Server: ping ovm-manager).
    I hope this can help you
    Best Regards

  • The Question about stock transfer between HU-Management and WM-Management

    Hi,
    There is a scenario about stock transfer between HU-Management and WM-Management storage location. I use transaction MB1B , movement type 313 , 315. After Good issue from WM-management storage location, outbound delivery will genarated, then Pack, Create/Confirm TO, at last post goods issue for the outboud delivery. But when i do movement type 315, there is a warning message "Data of preceding document was not transmitted", and from the F1 help i find this system reponse "You can maintain an indicator that makes information about preceding documents in this delivery available under delivery type in Customizing. For some characteristics of this indicator, the type of preceding document and the related document and item numbers must be transmitted to delivery creation. At least one of these parameters is missing.".
    So, My questions are:
    1. Generallily, Outbound delivery is created by SO, inbound delivery is created referenc PO, but how the stock transfer for 2 steps generate the outbould delivery and inbound delivery? Could you pls tell me the where i can config this in the IMG?
    2. What's "Data of preceding document was not transmitted" mean ? how to fix this issue ?
    Best Regards
    Boxer Du
    I am the SAP fans, focus on MM and WM. I am interesting TRM Yard Management and Cross Docking now.Very Gladly to talk you about these areas. I want to exchange the knowledge with you, and want to be a good friend of you. Pls contact me. You can find My MSN in the profile. Thanks.

    Hi,
    Sure, The inbound delivery type is set up in the IMG->Logistics General -> HU management -> Basics ->Delivery type -> Delivery type determination.
    For Inbound delivery type 'HID' is maintained in this view.
    Best Regards.
    Some One want to discuss the details , can contact me. Thanks.

  • Difference between Time Management and Time Evaluation

    Hello
    Is there any Difference between Time Management and Time Evaluation? if yes, then what is it? I guess there's no diff, time evaluation is a report..
    please advice
    Thanks

    Hi Charlene,
    Time management can be divided into 3 steps
    1.Time Recording
    2.Time Evaluation
    3. Planning
    Time Evaluation :
    The recorded time data is grouped and converted to wage types which can be used by payroll for compensation.SAP provides a time evaluation program RPTIME00 for this purpose.
    Standard schemas TM00 and TM04 are used for evaluation of time data got from positive and negative time recording approaches.
    time evaluation program RPTIME00 also calculates accrual and entitlement for employees.
    Regards,
    Swapnil

  • Anybody help on integration between IS-RETAIL and CRM application?

    hello experts!!
    anybody help on how is the business process (or) functionality between IS-RETAIL and CRM application?
    i mean integration between IS-RETAIL and CRM application.......

    Hi Subha
    Since IS-Retail is an Industrial Solution package which was built above the Baseline package,all the Business processes which were there in 4.7 is supported by IS - Retail. You can access the Retail Menu in W10T and S000 for your normal Menu in ECC6..
    Regards
    Anis

  • Connection Establishment between Solution Manager and BW

    Hi,
    Could you pl let me know the steps to follow for establishing the connection between Solution Manager and BI 7 system?
    Thanks & Regards,
    Vijaya

    Thanks!

  • Confused between knowledge management and knowledge warehouse

    Dear all,
    I'm confused on knowledge management in EP and knowledge warehouse.
    What is the difference between them?
    After reading several documents, I still don't understand...
    Could anybody help me about the concept, please?
    Thanks
    Regards

    Hi,
    See this link
    /thread/175875 [original link is broken]
    What is the difference between Knowledge Management and Knowledge Warehouse?
    Senthil K.

  • Integration between Sales Order and Inventory module

    Hi....
    Plz tel me d ans for.........
    a)Integration between Sales Order and Inventory module.
        b)Integration between Delivery and Inventory module
        c)Integration between Invoice and FI module.
    Thanks

    >
    manoja c wrote:
    > Hi....
    >
    > Plz tel me d ans for.........
    >
    >  a)Integration between Sales Order and Inventory module.
    >     b)Integration between Delivery and Inventory module
    >     c)Integration between Invoice and FI module.
    >
    >
    > Thanks
    HI Manoja,
    a) Integration between Sales Order and  Inventory module.
    While creating sales order due to Strategy group in MRP3 view of material master does an availability check and determines the first date of availability.
    b)Integration between delivery and  Inventory module.
    At the time of PGI (Goods issue)
    Cost of Goods Sold is debited due to configuration in OBYC GBB T-Key To Inventory Account
    c)Integration between Invoice and FI module.
    In account assignment(that reminds me of your previous que CONDITION TECHNIQUE is used for Account Determination as well)
    Tcode VKOA
    Also when Billing document is released to Accounting
    Customer Account is debited for the amount in Invoice.
    and credited to Sales Revenue Account
    Hope this clarifies to some extent
    Post for further clarification
    Reward if helpful
    -Abhishek

  • What is the recommended Delay/Latency between Call manager and The SRST setup

    Hi ,
    Need to understand the readability between the CUCM and SRST.
    What is the recommended Delay/Latency, Bandwidh  between Call manager and The SRST gateway setup.
    Regards,
    Velu S

    Hi Manish,
    I've been struggling to get this information and what I could understand from the SRND is that this 80ms is just related to the Intra-Cluster communications (Between Servers UCS), there is no relation with SRST Gateways:
    "The maximum one-way delay between any two Unified CM servers should not exceed 40 ms, or 80 ms round-trip time."
    From that I assume that the RTD between the SRST and the Cluster should be based on the affirmation below:
    "If a voice service is hosted across a WAN where the one-way latency is 200 ms, for example, users might experience issues such as delay-to-dialtone or increased media cut-through delays. For other services such as presence, there might be no problem with a 200 ms latency."

Maybe you are looking for