Integration between SAP HR and PS (Project System)

Hi Guys,
Is there any integration between Project System and HR in SAP. My client is service oriented company.
Every month New customers will join and each customer they call it as one project & maintain in PS. Now my client requirement is, through PS recruitment requisition should have to come to HR (For ex XYZ customer requires 2 Supervisors, 1 Manager), so that HR will recruit employees for the project.
So is there any integration between PS & HR
Regards
Prasad

Hi Vikram Patil,
In my client place we are not implementing SAP Payroll, hence if any new project is created in PS, I need only man power requirement from PS, how can I proceed now
If is there any documents on PS and HR integration please forward to my mail ID
[email protected]
Regards
Prasad

Similar Messages

Integration between SAP HR and FICO module regarding advance payments

Hi friends,
Can anybody tell me that is there any type of integration possible in SAP HR and FICO module regarding advance payments?
I mean to say that, if any advance payment made in cash department through FICO module on behalf of any employee vender and the amount is recover from that employee salary ( in full or installment ) through HR module in time of salary process. Is it possible that the recovery will reflect in FICO module also.
Eg. : Suppose one employee has taken an advance of Rs. 10000 from Accounts & the amount is recovered from his salary by Hr as Rs. 5000 per month. After first month salary is it show as Rs. 5000 to be recovered from him in the FICO module.
Please let me inform that is it possible in SAP. If yes then how?
I shall wait for your warm response.
With regards,
Diptendu

Hi Sikindar,
Thanks for your reply, it's really helpful for me. But can you please tell me that, is there any way to automatized it.
I want to mean that, what ever fitment is made by the accounts in FICO it will reflect in payslip and related reports of HR module.
Eg. :-
If anyone take any advance from accounts, after make an entry in FICO, it will directly reflect in his payslip as a note and also display in the salary related report of HR.
In time of recovery, it will automatically deduct the amount from his salary and reflect in his payslip ( in the deduction part ) and reports as per mansion installment ( The no. and amount of installment should be maintain in FICO. )
With regards,
Diptendu

PI Configuration and connection settings between SAP ERP and peoplesoft

Can someone please share some docs or the link for the PI Configuration and connection settings for the connection between SAP ERP and people soft system. Thanks in advnce
Regards
krish

Hello,
The following links will be helpful in this regard:
http://help.sap.com/saphelp_nw04s/helpdata/en/14/39084136b5f423e10000000a155106/frameset.htm
http://help.sap.com/saphelp_nwpi711/helpdata/en/d9/f3d22f01c741bdb0e62a2f4205411c/content.htm

About integration between SAP and non-SAP applications via javaidoc classes

Hi,All
Now we are implementing a SAP-Retail project,we encounter a problem of integration between SAP and non-SAP applications(POS),we want to set Inbound/Outbound between SAP and POS applications realtimely,POS can connect to the SAP system via VPN,weather it can be implemented?
I conceive to implement it with SAP Java Connector IDoc Class,I don't know weather it is the best solution?If not,please give some other proposal.
I have download the classes from SAP website and try it with the samples provided by SAP(JCoIDocSample1.java/JCoIDocSample3.java),In my testing,Inbound is succeed,but,in SAP-Retail IS,standard Outbound message type is defined via file port,some one told me that SAP Java Connector IDoc Class can only receive idocs from tRFC port?is it true?If not,please tell me how to deploy in SAP so java program can receive idocs from file port?

We too are interested in finding information on integration between SAP and Intergraph. Were you able to obtain information and I was wondering if could share this with us.
Thanks,
Sue
City of Edmonton

Integration between SAP and third party tax software

can some body explain me or provide me docs regarding integration between sap and third party tax software like vertex.
Thanks

Hi
First configure the same via the following menu path:
1.) IMG>Financial accounting>Financial accounting global settings>Taxes on sales/purchases>Basic settings>External tax calculation>Define physical destination
2.) Then test connection (option is available there).
3.) If the connection is successful, also verify that the external tax package installed supports the R/3 4.6 version of the API. You do that by going to:
System Information>Function List
Check if the following functions are listed:
RFC_CALCULATE_TAXES_DOC
RFC_UPDATE_TAXES_DOC
RFC_FORCE_TAXES_DOC
RFC_DETERMINE_JURISDICTION
4.) Then test the tax data retrieval:
From SE37, select the relevant function modules like RFC_DETERMINE_JURISDICTION.
The above 4 steps are necessary to satisfy that the RFC connection is established
Hope useful
S Jayaram

Integration between SAP server & External System

Dear all,
would you explain the pros and cons of integration between SAP and external system. what types issue i can face on SAP and external system respectively.
regards,
diya

Hi,
I don't know what is a COSMOS system and I don't know your company....
You will never get meaningful answers on an internet forum for questions so dependent on your specific environement and requirements. If you know your ECC6 system, then read the COSMOS documentation and ask the COSMOS vendor.
Regards,
Olivier

Connection Between SAP GTS and Legacy systems

Hi GTS Experts,
Could you please let me know how to connect between SAP GTS and Legacy systems.
This is for transfer of Customers, Vendors,Materials(Products in GTS),Transaction Data.
Could you please provide any documentation on this and is it PI team will do or functional guy.
One more question:
Customer created a sales order with sold to and ship to(both contains same address) in legacy system.
Then it will be sent to SPL screening in GTS.
Now he will change ship to address and this should not be passed to SPL screening-- how to do this.
Regards,
Murali

Hi Murali,
Apart from what Dave mentioned as above, although there is no such document available apart from SAP Standard content document but its something that is very standard to other modules as well.
Actually, you need to have a middle ware like SAP PI or any non SAP Product between SAP and Non SAP Legacy system. Also, mapping should be defined well in advance in this. Then it will also involve the EDI at the SAP GTS system end and Web skills( or applicale connection skills) at the Legacy system end to ensure appropriate mapping and interchange of realistic data.
Here, I would like to know if your legacy system had already some SAP system connected to it?.
Regards,
Aman

What is difference between SAP R3 And SAP IS Mills Product

HI Friends
What is difference between SAP R3 And SAP IS Mills Product
What are the futures are availables in IS MIlls
Regards

Hi,
SAP R/3 is the central enterprise version. It is not specifically designed for any inducstry sectors and it can cater many of the industry types.
Is is developed for specific industries an for SMB's (small and medium business). It will have components specifically for the industry.
The SAP Mill Products component adds sector-specific functionality to an ERP system to satisfy the complex requirements of mill industries (e.g. metal, wood, paper, textiles, construction materials, and cable sectors).
These industry segments differ from others primarily in that the materials used have a large number of characteristics and variants. The materials in the segments listed above are also predominantly area-based (e.g. paper, textiles, plastic film) or length-based (e.g. cables, piping). Account must be taken of these material characteristics throughout the entire supply chain.
To cater for the particularities of these industry segments, SAP Mill Products features processes and functions that cover the entire supply-chain cycle from product design and configuration, through planning, order processing, capacity planning and production, to final delivery. Additional functions are available in costing and inventory management. SAP Mill Products are also integrated into Quality Management, Financial Accounting, and Controlling.
Prase

Data reconciliation between R/3 and the BW Systems

How do we do data reconciliation between R/3 and the BW system for the following areas?
Purchasing
Controlling:
Project System:
COPA
SD
AP
Trgards,
Tony G

Tony
Have you looked these documents??
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/biw/how%20to%20validate%20infocube%20data%20by%20comparing%20it%20with%20psa%20data
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/7a5ee147-0501-0010-0a9d-f7abcba36b14
Re: BW v. R/3 data reconciliation
Hope this helps
Thanks
Sat

SNC between SAP BO and SAP BW for MS Advanced Analysis

Hy experts, i have configured the SNC between SAP BO and SAP BW but for any user i have this issue:
when the user launch a Bex Query by MS Advanced Analysis, this error message occurs:
No applicable data found.
On the SAP BW system, on ST22 there is this runtime error:
CALL_FUNCTION_SEND_ERROR.
An error occurred when executing a Remote Function Call.
"SNCERR_INVALID_FRAME#A received frame is invalid/truncated or is no SNC-frame"
What happened?
"CPIC-CALL: 'ThCMSEND' : cmRc=6 thRc=766#General SNC error "
An error occurred when executing a Remote Function Call.
An error occurred when executing a Remote Function Call.
"CPIC-CALL: 'ThCMSEND' : cmRc=6 thRc=766#General SNC error "
Status of connection.... "CODE=CM_SECURITY_NOT_VALID CM_SEND_RECEIVED
CM_COMPLETE_DATA_RECEIVED SAPCODE=766 CONV=91584639"
Internal error code.... "RFC_IO5"
There is an error in the communication system. To clarify
and resolve the error, contact your system administrator.
Last error logged in SAP kernel
Component............ "SNC (Secure Network Communication)"
Place................ "CPIC (TCP/IP) on host ANDREA_13"
Version.............. 5
Error code........... "-12"
Error text........... "SNCERR_INVALID_FRAME#A received frame is
invalid/truncated or is no SNC-frame"
Description.......... "SncProcessInput"
System call.......... " "
Module............... "sncxx.c"
Line................. " "
The error reported by the operating system is:
Error number..... " "
Error text....... " "
User and Transaction
Client.............. 100
User................ 00000015
Language Key........ "E"
Transaction......... " "
Transactions ID..... "6A3E22E031EEF13395AE0019BBCB620C"
Program............. "SAPLRSBOLAP_BICS_PROVIDER"
Screen.............. "SAPMSSY1 3004"
Screen Line......... 2
Information on caller of Remote Function Call (RFC):
System.............. "########"
Database Release.... 720
Kernel Release...... 720
Connection Type..... "E" (2=R/2, 3=ABAP System, E=Ext., R=Reg. Ext.)
Call Type........... "synchron and non-transactional (emode 0, imode 0)"
Inbound TID.........." "
Inbound Queue Name..." "
Outbound TID........." "
Outbound Queue Name.." "
Client.............. "###"
User................ "############"
Transaction......... " "
Call Program........."C:\Program Files\Microsoft Office\Office1"
Function Module..... "BICS_PROV_GET_INITIAL_STATE"
Call Destination.... "GBP_boe_Default"
Source Server....... "ANDREA_13"
Source IP Address... "10.101.3.80"
Additional information on RFC logon:
Trusted Relationship " "
Logon Return Code... 0
Trusted Return Code. 0
Note: For releases < 4.0, information on the RFC caller are often
only partially available.
Information on where terminated
Termination occurred in the ABAP program "SAPLRSBOLAP_BICS_PROVIDER" - in
"BICS_PROV_GET_INITIAL_STATE".
The main program was "SAPMSSY1 ".
In the source code you have the termination point in line 1
of the (Include) program "LRSBOLAP_BICS_PROVIDERU13".
Could you help me?
Thank's a lot and best regards.
Andrea Maraviglia

Ciao Andrea,
just a couple of hints:
- Did you already tried to skip logon to BOE and instead directly select BW system? this should avoid to involve snc and then BEx query should be accessible. This would be a further confirmation that issue is the SNC, even if the log you posted is pretty clear about that.
- Do you have snc installed even in local PC running MS Advanced Analysis? I Think it is necessary for the described workflow (page 24 of Admin Guide):
"With SAP BusinessObjects Enterprise as the BI platform, single sign-on works if the following conditions
are true:
u2022 BusinessObjects Enterprise XI 3.1 is configured correctly for single sign-on. For more information,
see u201CConfiguring SAP authenticationu201D in the Integration for SAP Solutions Install and Admin Guide
at http://service.sap.com/bosap-instguides SAP BusinessObjects Business Intelligence (BI) >
Integration for SAP Solutions > XI 3.1.
u2022 Secure Network Communications (SNC) is installed on each client PC. For more information, see
SAP Help Portal at http://help.sap.com SAP NetWeaver > SAP NetWeaver Library > SAP
NetWeaver by Key Capability > Security > Network and Transport Layer Security > Secure
Network Communications.
u2022 Each end user has a user account in the connected BW system."
Furthermore, if I rember correctly, there could be restriction in license using SAP Cryptographic Library (client connection is not supported: SAP notes 597059 and 397195), so you should check your SNC software.
Hope it could hep.
Regards.
Roberto.

Re: what is difference between sap locking and database locking

hi,
    what is difference between sap locking and database locking. Iam locked the table mara by using lock objects.
But iam unable to unlock the mara table. I give u the coding. Please check it.
REPORT zlock .
CALL FUNCTION 'ENQUEUE_EZTEST3'
EXPORTING
   MODE_MARA            = 'S'
   MANDT                = SY-MANDT
   MATNR                = 'SOU-1'.
call transaction 'MM02'.
CALL FUNCTION 'DEQUEUE_EZTEST3'
     EXPORTING
          mode_mara = 'E'
          mandt     = sy-mandt
          matnr     = 'SOU-1'.
IF sy-subrc = 0.
WRITE: 'IT IS unlocked'.
ENDIF.

Hi Paluri
Here is the difference between SAP locks and Database locks, i will try to find the solution to your code.
Regards
Ashish
Database Locks: The database system automatically sets database locks when it receives change statements (INSERT, UPDATE, MODIFY, DELETE) from a program. Database locks are physical locks on the database entries affected by these statements. You can only set a lock for an existing database entry, since the lock mechanism uses a lock flag in the entry. These flags are automatically deleted in each database commit. This means that database locks can never be set for longer than a single database LUW; in other words, a single dialog step in an R/3 application program.
Physical locks in the database system are therefore insufficient for the requirements of an R/3 transaction. Locks in the R/3 System must remain set for the duration of a whole SAP LUW, that is, over several dialog steps. They must also be capable of being handled by different work processes and even different application servers. Consequently, each lock must apply on all servers in that R/3 System.
SAP Locks:
To complement the SAP LUW concept, in which bundled database changes are made in a single database LUW, the R/3 System also contains a lock mechanism, fully independent of database locks, that allows you to set a lock that spans several dialog steps. These locks are known as SAP locks.
The SAP lock concept is based on lock objects. Lock objects allow you to set an SAP lock for an entire application object. An application object consists of one or more entries in a database table, or entries from more than one database table that are linked using foreign key relationships.
Before you can set an SAP lock in an ABAP program, you must first create a lock object in the ABAP Dictionary.

What is the diffrence between sap events and application events

Hi all,
what is the diffrence between sap events and application events.Can any one tell me with examples.
regards,

Hi,
Look at this,
System Events (Default)
The event is passed to the application server, but does not trigger the PAI. If you have registered an event handler method in your ABAP program for the event (using the SET HANDLER statement), this method is executed on the application server.
Within the event handler method, you can use the static method SET_NEW_OK_CODE of the global class CL_GUI_CFW to set a function code and trigger the PAI event yourself. After the PAI has been processed, the PBO event of the next screen is triggered.
The advantage of using this technique is that the event handler method is executed automatically and there are no conflicts with the automatic input checks associated with the screen. The disadvantage is that the contents of the screen fields are not transported to the program, which means that obsolete values could appear on the next screen. You can work around this by using the SET_NEW_OK_CODE method to trigger field transport and the PAI event after the event handler has finished.
Application Events
The event is passed to the application server, and triggers the PAI. The function code that you pass contains an internal identifier. You do not have to evaluate this in your ABAP program. Instead, if you want to handle the event, you must include a method call in a PAI dialog module for the static method DISPATCH of the global class CL_GUI_CFW. If you have defined an event handler method in your ABAP program for the event (using the SET HANDLER statement), the DISPATCH method calls it. After the event handler has been processed, control returns to the PAI event after the DISPATCH statement and PAI processing continues.
The advantage of this is that you can specify yourself the point at which the event is handled, and the contents of the screen fields are transported to the application server beforehand. The disadvantage is that this kind of event handling can lead to conflicts with the automatic input checks on the screen, causing events to be lost.
Hope u understood.
Thanks&Regards,
Ruthra.R

What is the diffrence between SAP View and CAD View ?

What is the diffrence between SAP View and CAD View ?
What is the main purpose of SAP View
and
What is the main purpose of CAD View
On SAP help i found
SAP View is used for :The SAP view displays the SAP structure (document-based structure) for the active CAD object, or another document info record (header document), with a single-level or multilevel document structure in a tree structure. You can variably configure the fields using the layout editor.
CAD View is used for :The CAD view displays the document-based structure of the currently active CAD object, such as the structure of an assembly. The CAD system determines the complete (multilevel) structure and copies it either completely or in stages to the SAP system, in accordance with the default explosion level.
BUT I did not understand it well
Can someone explain this with an example
THanks
Raj

Hello Raj,
SAP View can be further described as the view that is based on what is existing already in the SAP system. This view is generally used by SAP purchasing, MM people etc
CAD view is nothing but the replication of the model tree view in the SAP system. This is used by the design engineer and this view replicates only the parts that are actively displayed on the CAD tool window.
hope this helps. Let me know if you have further questions else please close the message.
regards
N K

Establishing a connection between SAP SRM and MM

Dear All,
I am working for a multi-national company and now we are thinking to implement SAP SRM but I have some questions about communication between SAP MM and SRM. Firstly I want so share with you our as-is status and then my doubts and question that I have.
In our case we have two different locationed organizations which are using different version of SAP system and SAP MM. In this two sap system mostly codes are and descriptions are different for all materials and now we want gather all data and we want to have one global code system and (local code also will remain). I mean we want to call same materials with one global unique code instead of two different codes. We are thinking to implement something like coding center that will take local master data from local organization then will assign global code, update table then with somehow will update SAP SRM.
For example:
We have local master data on R/3 is maintained manually by local user and net item is created locally each country by local user.Coding center will be aware of new creation by mail, automatically. Coding center will update table (adding a new row for each new item) on translator (tool for assigning global code for materials) assign to each new item a global code and category and in this way SRM will be updated automatically based on translator.
I am thinking to develeop a tool (excel,access etc.) that will take new item creation manually or auto from local organization then will assign a global code and category then will update SAP SRM automatically
Regarding to tool I have some questions:
1)     which are the standard communication channel between R/3 and SRM or How they can speak with each other ?
2)     Is there any standart batch file (BI or BAPI) to be able to perform this.Is it possible to develop tool using excel or access etc. which will manage coding task.
3)     When we are trasferring for the first time Master Data from MM to SRM is there any standard transaction?
4)     how the two MD are aligned (i.e. what if a new item is created or modified on MM)?
5)     standard program (transaction) for aligning available ?
6)     ) how this process can be triggered (scheduled using SAP scheduler, event or user driven)
7)     Where the translator (tool) should be (R/3 local, SRM, BW, other) --> Enrichment table
8)     How we can build the communication transaction?
Thank you very much
Any comments and answers will appreciated and rewarded
Regards,

Hi,
Have you considered using CCM. You generally use an industry standard code (perhaps UNSPSC) in CCM as your vendors would all have different number (similar to your scenario). CCM is a plug-in to SRM, supplied by SAP.
The authoring tool is where you can enrich your catalogue, and have approval dependant on rules that you setup. In your case you would possibly have a catalogue per locationed organisation (or R/3 system). These would then be mapped to a master catalogue, and assigned to users as views. This tool is a BSP on SRM. You could also upload these catalogues from Excel (as a CSV) or through XI as XML. We use the automatic transfer of materials from R3 and then there is a report in SRM to feed that through to the catalogue.
The only thing that needs to be thought through is how you feed the selected catalogue item back to the differing R3 systems, but this shouldn't be a stumbling point.
Cheers
Rob

Between SAP Licenses and Employee Records Realtinship

Hi Experts
The Scenario of the issue is as below.
SAP Licenses held by the company is -- numbers.
And the employee records including PD(appraisal),PA & OM exceeds the allowed records numbers.
Qn1 Whats the realtion between SAP license and records ?
Qn2 How to go about in this scenario?
Qn3. Should i prioritise the existance of records in appraisals and delete the least priority after consulting the client?anyway OM & PA records should not be deleted.
Please throw some light on the issue.

Abhilash,
Usually the SAP Licenses are with respect to named users and their rights to the system....
If you have N licences of various types and M employees accessing SAp ( M > N ) then it will be an issue .. usually for services like ESS - you have a licence called employee user and for more access you have professional licenses etc...
You could check the type of licenses that the company has and the number of licenses of each type and also the Contract signed with SAP as to the licensing policy..
Arun
Hope it helps...

Integration between SAP HR and PS (Project System)

Similar Messages

Maybe you are looking for