Integration between SRM and ERP in part of Business Partners
Hi all
Could we make integration between SRM and ERP in part of Business Partners if we use Standalone Scenario? Thanks
Hi
Any scenario, You have EBP system as well as you said you have ERP system too. so you can do BBPGETVD and pull the vendor records. Normally standalone system may not have ERP system. In standalone Your account payable system integrated with your EBP system.
If you want to create a vendors locally in SRM you can create local vendors via web BBPMAININT or BP in GUI.
regards
Muthu
Edited by: Muthuraman Govindasamy on Sep 10, 2008 9:14 AM
Similar Messages
-
MDM integrity between SRM and R/3
Hi All,
How MDM integrity of the process validations being made between SRM and R/3 for the creation of different documents.
Please share me any documents regarding MDM intergirty between SRM and R/3. This is not related to Catalogs,
1. Creation of documents like GOA in SRM and distributed to R/3. How MDM will validate that data.
2 If same material available in different backend system. while creating Contract in SRM, MDM should check the R/3 materials in MDM
3. How to integrity works for Vendors.
Thanks
raviHi,
Take a look in these threads:
[Re: material master replication|Re: material master replication]
[Master Data Synchronization between SRM and ERP|Master Data Synchronization between SRM and ERP]
[Re: Material replication|Re: Material replication]
Rgs,
Pedro Marques -
Remove RFC calls between SRM and ERP
Hi,
Did any of you ever worked on removing RFC calls between SRM and ERP systems?
Does SAP maintains a lost of these built-in RFC calls?
What are the known constraints to replace them by webservice calls ?
Thanks
YannHi Yann,
There is nothing on the SAP database for SRM and the backend using webservice.
There is for connections to SRM catalog.
I haven't heard anything about plans to change this.
Hope this helps,
Kind Regards,
Matthew -
Deactivate integration between SUS and ERP-MM
Dear Expert,
I have one requirement from user that all supplier invoices created in SUS must be block/park status in ERP-MM. I notice that there is ABAP effort here in order to facilitate the requirement. Prior to do that the automation invoice verification in ERP-MM must be disconnected from SUS, I believe somebody has experience before. Appreciate if you can share how to deactivate that setting.
Best regards,
MahnansaHI, Mahnansa
you can check the NOTE:501524.mybe helpful
Bestregards
Alex -
Custom Integration between CLM and SRM
Hi
Can any body help me how to do custom integration between CLM 2.0 and SRM for contracts using PI. On SRM side we have customised API. More specifically I need what is to be done in PI for custom integration between CLM and SRM.
Thanks in Advance
M G REDDYHi There,
Has anybody managed to custom integrate CLM & SRM?
If so please kindly share how this was achieved.
Thanks,
Sheena -
How does the integration between CRM and SD occur
How does the integration between CRM and SD occur? Is only via ALE and are there config steps in CRM to ensure the correct data mapping between CRM and SD?
So, if I create an order or quote in CRM how is it then created in SD? Or do they share the same data store.
thanksHi John,
Here is good documentation regarding Data Exchange for Sales Transactions: the CRM Enterprise and the ERP System are two different repositories, If you create the Sales Order in CRM then they will be replicated into SD (using CRM Middleware, BDoc's)
http://help.sap.com/saphelp_crm60/helpdata/en/52/2d0c38941e5666e10000009b38f8cf/frameset.htm
Also you can check the best practice guide for CRM 2007 there you have plenty of information
http://help.sap.com/bp_crmv12007/CRM_DE/HTML/index.htm
Hope this help,
Regards,
Ramon -
Link Table between CRM and ERP
Hi Experts,
Does anyone knows the link table between CRM and ERP for Contact Person (Buss Part) CRM and Contact Person ERP.
In my customer system, contacts are automatically duplicated in CRM.
When you make a change in ERP, this change is automatically done in CRM.
So I suppose that there is a table between the both systems to find the corresponding number...
Thank you for your help and hope my English is good enough to understand :o)
Best regards,
Luis.Hi Micky,
Thanks for your answer.
Unfortunatelly, number are differents...
I move this question to CRM forum ;o)
Kr,
Luis.
This has been solved in this thread:
Link Table between CRM and ERP
Edited by: Luis Loredo Marino on Feb 24, 2010 1:24 PM -
Difference between SRM and SNC
Hi all,
i frequently get this question from many of my friends who work on SRM, as what is the difference between SRM and SNC.Because the supplier collaboration part of SNC resemles with few functionalities of SRM.
What kind of industries go for SRM?
What kind of industries go for SNC?
Regards,
NandanHi Nandan
SRM and SNC have few functionalities common.
SUS and Plan driven procurement. Like SNC Purchase Order Collaboration, these are direct procurement(Supplier known).
Where SRM has other business process like Self Service Procurement, where in they can create quotations and then compare and select the best supplier(In direct Procurement)
In SNC we do not support Service Orders, We only support Quantity Orders. Where SRM can support both.
They have other Business process(SAP SRM Supplier Collaboration), where in the solutions and backend systems like SAP Supplier Relationship Management (SRM), SAP Product Lifecycle Management (PLM), Collaboration Folders (cFolders), and SAP Supply Chain Management (SCM), to provide collaborative planning, sourcing, procurement.
Where SNC plays a material monitor here communicating between OEM & Supplier Org
SRM support both quantity procurement and service procurement directly and indirectly.
Where in SNC supports direct quantity procurement.
It is the business need, upon which they select SNC or SRM.
Best Regards
Vinod -
Is it a Bug? Integration between Dreamweaver and Fireworks is broken in somewhere?
I can not upload images related my topic here but you can see
it in the same topic at
http://www.fireworksguruforum.com/index.php?showtopic=14282
I use CS3 Suite. It is a big trouble for me in working on
real pages. Integration is broken in somewhere else and after that
point it becomes impossible to work on Fireworks through
Dreamweaver.
I've made test to show this trouble and I narrowed the
problem to the pictures as shown in the figures below,
1) In figure one I am creating a completely new Fireworks
file as arrow.png with two frames and one slice in it. After I am
saving it as .png I am exporting it as .html with images in /images
subfolder.
2) After saving and closing the file in Fireworks, in figure
two, I am opening the html in Dreamweaver and changing the page
properties by writing zeros to page margins and by changing the
default font.
-----I guess in this point something happens which breaks the
integration between FW and DW--------because;
3) In figure three I am opening the .png through Dreamweaver
(by "Edit") and changes the place and size of the slice a little
bit
4) When I press Done in Fireworks I see this picture in
figure four in Dreamweaver which shows integration between FW and
DW about table structure is broken. (In this point if I add any
behaviur to the slice DW doesn't recognize it, or any other change
in FW can not be recognized by DW)
5) In order to show this broken integration in table
sturucture, I am putting a new slice to png when Editing from DW in
FW.
6) When I click on Done in DW I see this picture on the
figure six. Beacuse FW doesn't have any effect on html's table
structure code.
I can not upload images related my topic here but you can see
it in the same topic at
http://www.fireworksguruforum.com/index.php?showtopic=14282damlays wrote:
> I can not upload images related my topic here but you
can see it in the same
> topic at
>
http://www.fireworksguruforum.com/index.php?showtopic=14282
>
>
> I use CS3 Suite. It is a big trouble for me in working
on real pages.
> Integration is broken in somewhere else and after that
point it becomes
> impossible to work on Fireworks through Dreamweaver.
>
> I've made test to show this trouble and I narrowed the
problem to the pictures
> as shown in the figures below,
>
> 1) In figure one I am creating a completely new
Fireworks file as arrow.png
> with two frames and one slice in it. After I am saving
it as .png I am
> exporting it as .html with images in /images subfolder.
>
> 2) After saving and closing the file in Fireworks, in
figure two, I am opening
> the html in Dreamweaver and changing the page properties
by writing zeros to
> page margins and by changing the default font.
>
> -----I guess in this point something happens which
breaks the integration
> between FW and DW--------because;
>
> 3) In figure three I am opening the .png through
Dreamweaver (by "Edit") and
> changes the place and size of the slice a little bit
>
> 4) When I press Done in Fireworks I see this picture in
figure four in
> Dreamweaver which shows integration between FW and DW
about table structure is
> broken. (In this point if I add any behaviur to the
slice DW doesn't recognize
> it, or any other change in FW can not be recognized by
DW)
>
> 5) In order to show this broken integration in table
sturucture, I am putting
> a new slice to png when Editing from DW in FW.
>
> 6) When I click on Done in DW I see this picture on the
figure six. Beacuse FW
> doesn't have any effect on html's table structure code.
>
>
> I can not upload images related my topic here but you
can see it in the same
> topic at
>
http://www.fireworksguruforum.com/index.php?showtopic=14282
>
>
>
I can reproduce your results, but I don't consider this a
bug; just a
limitation of Roundtrip editing.
You can't add or change slices without re-exporting the html
from
Fireworks. Roundtrip is for image editing, not for altering
the table
structure. If I edit, and re-export, my table remains intact.
If you want to edit the slices and resulting html, open the
PNG file
independently of Dreamweaver, change your slices and images
and then
choose File > Update HTML (this option is not available
when in
Roundtrip mode). FW will ask you to locate the html file.
When located,
you will have the options of
Replace Images and Their HTML - replaces the previous
Fireworks HTML.
Update Images Only - overwrites only the images.
As an aside, the rigid table created by FW is rarely
desirable for a
production web site.
HTH
Jim Babbage - .:Community MX:. & .:Adobe Community
Expert:.
http://www.communityMX.com/
CommunityMX - Free Resources:
http://www.communitymx.com/free.cfm
.:Adobe Community Expert for Fireworks:.
Adobe Community Expert
http://tinyurl.com/2a7dyp
.:Author:.
Lynda.com -
http://movielibrary.lynda.com/authors/author/?aid=188
Peachpit Press -
http://www.peachpit.com/authors/bio.aspx?a=d98ed798-5ef0-45a8-a70d-4b35fa14c9a4
Layers Magazine -
http://www.layersmagazine.com/author/jim-babbage -
Something went wrong with sync. between pc and Ipad now part of the information is gone on the Ipad. How do I take the backup of the pc and put it back on the Ipad.
Same thing just happened to me. Help!
-
Can any one send procedure for integration between XI and Geographic inform
can any one send procedure for integration between XI and Geographic information System(GIS).
Please clarify ASAP..
ThanksHi,
Please see the below links
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/d53af8ca-0801-0010-08b0-dce9e02130a8
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/d53af8ca-0801-0010-08b0-dce9e02130a8
GIS VS XI
Regards
Chilla..
Points rewarded if it is usefull..<i></i> -
Business Process & Integration between FI and CML
Hi,
Could you please brief about Business Process & Integration between FI and CML.
Thanks in advance
PrabhakarAny Inputs please for CML
-
hai sap family memebers,
Can anybody lit me the integration between hr and sd
as per as my knowledge
xd02--> we can integrate hr an sd
if any thing new plz let me know
all the best
madhuHi Madhu,
I think Integration will also happen through Infotype 0900 (Sales Data).
Here we will assign Employee to Sales Organization, Sales Office and Sales Group
Thanks
Uday -
About integration between SAP and non-SAP applications via javaidoc classes
Hi,All
Now we are implementing a SAP-Retail project,we encounter a problem of integration between SAP and non-SAP applications(POS),we want to set Inbound/Outbound between SAP and POS applications realtimely,POS can connect to the SAP system via VPN,weather it can be implemented?
I conceive to implement it with SAP Java Connector IDoc Class,I don't know weather it is the best solution?If not,please give some other proposal.
I have download the classes from SAP website and try it with the samples provided by SAP(JCoIDocSample1.java/JCoIDocSample3.java),In my testing,Inbound is succeed,but,in SAP-Retail IS,standard Outbound message type is defined via file port,some one told me that SAP Java Connector IDoc Class can only receive idocs from tRFC port?is it true?If not,please tell me how to deploy in SAP so java program can receive idocs from file port?We too are interested in finding information on integration between SAP and Intergraph. Were you able to obtain information and I was wondering if could share this with us.
Thanks,
Sue
City of Edmonton -
Session variable filters in the integration between OBIEE and webcenter
Hello All,
I have a customer with the requirement to make sure that reports created in answers and containing sessions variables in filters definition will be correctly filtered once called from webcenter.
So if an OBI report is diplayed in webcenter and contains the same type of filters (based on session variable), will the results be filtered based on the specified variable?
In other words can we use session variables in the integration between OBIEE and webcenter?
Thanks OlayinkaHave you follow all the steps written here :
http://download.oracle.com/docs/cd/E10415_01/doc/bi.1013/e12188/T421739T475591.htm#T480640
Do you have create the groups ?
Do you connect as a member of the group XMLP_ADMIN ?
Cheers
Nico
Maybe you are looking for
-
which and how to download file manager in SE wt13i Solved! Go to Solution.
-
Compressor mucking up frame sizes? Totally confused. Help!
Here's the situation. I have some 720x486 (NTSC-CCIR) 16:9 23.976 video (nice, yummy, uncompressed 10-bit) in Final Cut. I want to compress this for DVD. But no matter what settings I use, Compressor mucks it up. If I use the Apple-provided MPEG-2 5.
-
Hi, I was looking at the example of ejb session in the toplink installation files. I noticed that after having acquire a uow, not any commit is done (I tested it with my application) and it works without a commit, is this because of the external tran
-
TFTP:Error:not defined
I have a sol10 jumpstart server for x86 sol10 clients. It has been working find until now. I now have two clients an X4200 and an X2100 to jumpstart but I get the following main error after it reads the menu.lst and before it loads the miniroot: dhcp
-
PNG files are grainy when opened in Illustrator.
Files that I create in Photoshop and save as PNG files are grainy and colored incorrectly when opened in Illustrator. The files are fine when opened in other programs. Please see the pictures below to illustrate my point. These are the same file, how