Integration between Time Management and Payroll

I configured Time Management and Payroll....
Before It created a problem in time management in absence quotas...
for testing payroll I deactivated schema DAYPR that is time data processing....
Generated absence quotas correctly
Now I activated DAYPR still in display log i dont see any integration with time management....
I changed the time management status to 7 and 9
still its not integrating with Time Management
what is that I want to do to integrate time management with payroll

Payroll is not integrating with Time Management
In Log I can see No Time Management Integration
I configured Time Management and Payroll....
Before It created a problem in time management in absence quotas... it throwed an error in DAPPR
for testing payroll I deactivated schema DAYPR that is time data processing....
Generated absence quotas correctly
Now I activated DAYPR still in display log i dont see any integration with time management....
I changed the time management status to 7 and 9
Payroll is running with out time management
still its not integrating with Time Management
l

Similar Messages

Difference between Time Management and Time Evaluation

Hello
Is there any Difference between Time Management and Time Evaluation? if yes, then what is it? I guess there's no diff, time evaluation is a report..
please advice
Thanks

Hi Charlene,
Time management can be divided into 3 steps
1.Time Recording
2.Time Evaluation
3. Planning
Time Evaluation :
The recorded time data is grouped and converted to wage types which can be used by payroll for compensation.SAP provides a time evaluation program RPTIME00 for this purpose.
Standard schemas TM00 and TM04 are used for evaluation of time data got from positive and negative time recording approaches.
time evaluation program RPTIME00 also calculates accrual and entitlement for employees.
Regards,
Swapnil

Integration between Soluiotn Manager and HP Quality Center

Hi Folks,
I am currently configuring the integration between Solution Manager and HP Quality Center, and during the set up of communication user, I get the following error:
User hpqc_comm is not authorized to access projects
Message no. QC_INTEGRATION016
Diagnosis
You want to access projects in the Quality Center with the communication user hpqc_comm. This causes an error because the user either does not exist in the Quality Center or is not assigned to any project.
Procedure
Check whether the user hpqc_comm is in the Quality Center, and whether it is assigned to at least one project. Ask the Quality Center administrator to create the user and assign it to projects, if necessary.
You can use another user for the communication
Well, I have created that user in HPQC and assigned it to projects.
Thanks for your help
Marco

the error is in Solution Manager. I am defining the communication parameters in SOLAR_PROJECT_ADMIN / <selected project> / edit / Connection to HP Quality Center. I choose the corresponding project in Quality Center, but when I validate the screen, I get the error I mentioned before, even though the communication user exists in HPQC and is assigned to that specific project.
Thanks for your reply.
Marco

Integration between case management and C-folder

Dear Experts ,
Can you help regarding integration between Case Managment and C-folder ???
Kind Regards

Hi,
Simple answer: There is no specific integration existing.
Case Management is using DMS as one option to save documents like Word, Excel.
The cFolders solution is normally on a separate server and DMS documents can be checked out from the content server to cFolders and vice versa in SAP standard.
I have experience from both solutions and I really don't see how these two solutions should be linked to each other from a business perspective.
Regards, Johan

Time management and Payroll

Hi Team,
_My first question:_
Kindly can you let me know how does the data go and get process in Payroll apart from the below points?
I would like to share with you my knowledge on it.
Integration between IT0007 and IT0008-Capacity utilization
After running Time evaluation Time results will get procerssed in Payroll through cluster B2.
In the payroll schema XT00 is the sub schema where Payroll takes the Time data and process in Payroll.
_My second question_
Does XT00 reads cluster B2?
_My third question_
Whether TC:PT60/Report :RPTQTA00 is used to generate quotas?
I would like to share with you my knowledge on it.
I see that in both ways they can be generated.But let me know in what cases we use PT60 and RPTQTA00.
_My fourth question_
How can we carry forward the balance quota of the previous year to the next year with specific validity dates ?
And also how can we carryforward only certain no.of quota ?
Team sorry for such a long questionnaire .Kindly help me in getting answer and clarity on the above questions.
Regards,
Vimal
Edited by: Vimal Kumar on Sep 21, 2009 4:55 PM
Edited by: Vimal Kumar on Sep 21, 2009 5:02 PM

Hi,
Q1:Kindly can you let me know how does the data go and get process in Payroll apart from the below points?
A1:Time evaluation integration with payroll: just as you said, but if no time eavluation run for some days in the payroll period, TC00 will be perform to run time data processing in payroll without B2 written.
Without time evaluation: sub schema TC00 will be performed to run time data processing in payroll without B2 written.
Q2:Does XT00 reads cluster B2?
A2: Yes, but depends on time management status of infotype 0007(time evaluation inte. with payroll)
Q3:Whether TC:PT60/Report :RPTQTA00 is used to generate quotas?
A3: Yes, both can generate quotas. For some simple case, or not implement time evaluation or have nothing to do with time type, you should use RPTQTA00. But for some special case, or time quota gen. with time types, you should use PT60.
Example:
case 1:Total 12 days one year, but 1 day increased each month, you should use PT60 to generate montly and increase.
case 2:Overtime transfer to leave: you should use PT60, because it relates to time type (overtime)
case 3:12 days one year, accrual at the beginning of year, you should use PT60 if you do not implement time evaluation.
Q4:How can we carry forward the balance quota of the previous year to the next year with specific validity dates ?
And also how can we carryforward only certain no.of quota ?
A4:We can use time evaluation and write some PCR to achieve or just simple to set the validity dates and deduction priority.
Hope helps,
Chen Jian

Integration between organizational management and personnel administration

Dear Sirs/Madams,
I am trying to integrate organizational management and personnel administration to have see positions, jobs, and units which are assigned in PPOME. I made some configuration in T77SO and correct the needed integration in PLOGI position and especially for ORGA.
Nevertheless, the integration problems did not solve. Now, I was wondering if you would mind helping me in this case.
Thanks for your considerations,
Kind Regards,
Mohammad Hassan Salmani.

To set up/fix full integration between PA and PD, run below reports in this sequence:
1. RHINTE00 – Transfer PA records into PD positions –batch
2. RHINTE20 – Create OM objects in PA tables – Online
3. RHINTE30 – Bulk update of infotype 0001
4. RHINTECHECK – Program to check PA to PD
5. RHCHECKV - Checks all inverse relationships
Also,It is important to realize that in PA, there are tables that contain objects from OM, i.e. for those items displayed on infotype 0001 Organizational Assignment. Sometimes the tables can get ‘out of step’ with those in PD – table HRP1000. Check those as well. The tables are:
T513,T513S Object type C (Job)
T528B,T528T Object types S (Position) and A (Work center)
T527X Object type O (Organizational unit)
Regards,
Mukesh

Integration between SAP HR and PS (Project System)

Hi Guys,
Is there any integration between Project System and HR in SAP. My client is service oriented company.
Every month New customers will join and each customer they call it as one project & maintain in PS. Now my client requirement is, through PS recruitment requisition should have to come to HR (For ex XYZ customer requires 2 Supervisors, 1 Manager), so that HR will recruit employees for the project.
So is there any integration between PS & HR
Regards
Prasad

Hi Vikram Patil,
In my client place we are not implementing SAP Payroll, hence if any new project is created in PS, I need only man power requirement from PS, how can I proceed now
If is there any documents on PS and HR integration please forward to my mail ID
[email protected]
Regards
Prasad

Lost connection between ovm-manager and ovm-server (ovm 3.1)

Hi,
I have a manager as a VM on my laptop and a physical server as an ovm-server. Everything is fine when i boot the server but after some time, the manager stop to show the information from the server. in the ovs-agent log file the following messages are repeated regulary
[2013-08-29 13:06:19 6160] DEBUG (notification:289) Trying to connect to manager.
[2013-08-29 13:06:20 6160] DEBUG (notification:291) Connected to manager.
[2013-08-29 13:06:20 6160] ERROR (notification:316) No manager Core API server object for 10:60:4b:88:bc:24:10:60:4b:88:bc:25:fe:ff:ff:ff.
[2013-08-29 13:06:34 6171] ERROR (notification:64) Unable to send notification: (111, 'Connection refused')
I did not reboot neither the server nor the manager. No IP change. Rebooting the manager has no effect.
The only way to restore communication is to restart the ovs-agent on the server, but this restart disable the network card. I must be physical on the server to restart the network.
any help will be very helpful
best regards
Jean-Marc

Hi,
The are many steps to verify:
Verify with your firewall on the Oracle VM Manager system (service iptables stop).
Verify with a ping between OVM Manager and OVM Server using the IP Address and using the hostname for each one (from OVM Manager : ping ovm-server ; and from OVM Server: ping ovm-manager).
I hope this can help you
Best Regards

What is a maximum remoteness between time capsule and device for having a good wifi signal?

What is a maximum remoteness between time capsule and device for having a good wifi signal?

In open air.. line of sight you should work very well over 100M and most likely still work at 200M.
Unfortunately in houses.. there is almost no way to tell. But you can assume signal on 5ghz will dimish very rapidly.. 2 or 3 walls/floors/major obstacles and nothing left.. 2.4ghz should manage your whole house but you might find signal in far corners unusable. Count the number of walls, floors/ceilings it is going through in a straight path, router to client. You can think of it as a 4" pipe.. and even the angles are important.. if it hits a wall made of brick at acute angle it is twice as thick as hitting it dead on. Mirrors, tinted glass are metal reflectors.. reinforced concrete is both a reflector with metal bars and absorber with concrete.. add a bit of moisture content and it is a great block.

Is there link between account receivable and payroll module ?

In Account Receivable :( I have This Case )
How to record a sale to an employee? How to record it as an employee loan without effecting bank or cash records.
is there link between account receivable and payroll module ?
this solution i suggets bellow , is valied solution?
Define Invoice transaction type "Employee Sales "
This Type will affect (Receivable ) Employee Account
In Payroll Module :
( Manually )TheEmployee Sales invoice will sent to payroll department to extract amount from employee , this extract Will credit the same "Receivable" Employee account

Employee Loan in AR can be tied with Element Balance of payroll.you should have to develop some mechism to get the money from AR and update into Payroll element balance, this way you can manage your employee loan without touching bank.
There is no seeded functionality comes with AR that have such capability.

Time Management without Payroll?

Has anyone implemented Time Management without Payroll? I am in the process of coming up with a design on retrieving payable hours from the B2 cluster and send them to an external payroll system. The problem I am running into is knowing what has changed (if hours were added or deleted in the past) without having to keep my own version of the cluster the last time Time Eval was run and comparing to this time.
Any help is appreciated...

I had this problem view years ago (Release 4.0)
You have to use the Report RPTEZL00 to made the wagetypes for the other payroll - the problem was the table T599Z - that is used to translate the SAP LGA into the other LGA - the check ends in both times in T512W

Integration between Sales Order and Inventory module

Hi....
Plz tel me d ans for.........
a)Integration between Sales Order and Inventory module.
    b)Integration between Delivery and Inventory module
    c)Integration between Invoice and FI module.
Thanks

>
manoja c wrote:
> Hi....
>
> Plz tel me d ans for.........
>
> a)Integration between Sales Order and Inventory module.
>     b)Integration between Delivery and Inventory module
>     c)Integration between Invoice and FI module.
>
>
> Thanks
HI Manoja,
a) Integration between Sales Order and Inventory module.
While creating sales order due to Strategy group in MRP3 view of material master does an availability check and determines the first date of availability.
b)Integration between delivery and Inventory module.
At the time of PGI (Goods issue)
Cost of Goods Sold is debited due to configuration in OBYC GBB T-Key To Inventory Account
c)Integration between Invoice and FI module.
In account assignment(that reminds me of your previous que CONDITION TECHNIQUE is used for Account Determination as well)
Tcode VKOA
Also when Billing document is released to Accounting
Customer Account is debited for the amount in Invoice.
and credited to Sales Revenue Account
Hope this clarifies to some extent
Post for further clarification
Reward if helpful
-Abhishek

What is the recommended Delay/Latency between Call manager and The SRST setup

Hi ,
Need to understand the readability between the CUCM and SRST.
What is the recommended Delay/Latency, Bandwidh between Call manager and The SRST gateway setup.
Regards,
Velu S

Hi Manish,
I've been struggling to get this information and what I could understand from the SRND is that this 80ms is just related to the Intra-Cluster communications (Between Servers UCS), there is no relation with SRST Gateways:
"The maximum one-way delay between any two Unified CM servers should not exceed 40 ms, or 80 ms round-trip time."
From that I assume that the RTD between the SRST and the Cluster should be based on the affirmation below:
"If a voice service is hosted across a WAN where the one-way latency is 200 ms, for example, users might experience issues such as delay-to-dialtone or increased media cut-through delays. For other services such as presence, there might be no problem with a 200 ms latency."

The Question about stock transfer between HU-Management and WM-Management

Hi,
There is a scenario about stock transfer between HU-Management and WM-Management storage location. I use transaction MB1B , movement type 313 , 315. After Good issue from WM-management storage location, outbound delivery will genarated, then Pack, Create/Confirm TO, at last post goods issue for the outboud delivery. But when i do movement type 315, there is a warning message "Data of preceding document was not transmitted", and from the F1 help i find this system reponse "You can maintain an indicator that makes information about preceding documents in this delivery available under delivery type in Customizing. For some characteristics of this indicator, the type of preceding document and the related document and item numbers must be transmitted to delivery creation. At least one of these parameters is missing.".
So, My questions are:
1. Generallily, Outbound delivery is created by SO, inbound delivery is created referenc PO, but how the stock transfer for 2 steps generate the outbould delivery and inbound delivery? Could you pls tell me the where i can config this in the IMG?
2. What's "Data of preceding document was not transmitted" mean ? how to fix this issue ?
Best Regards
Boxer Du
I am the SAP fans, focus on MM and WM. I am interesting TRM Yard Management and Cross Docking now.Very Gladly to talk you about these areas. I want to exchange the knowledge with you, and want to be a good friend of you. Pls contact me. You can find My MSN in the profile. Thanks.

Hi,
Sure, The inbound delivery type is set up in the IMG->Logistics General -> HU management -> Basics ->Delivery type -> Delivery type determination.
For Inbound delivery type 'HID' is maintained in this view.
Best Regards.
Some One want to discuss the details , can contact me. Thanks.

What's the difference between time capsule and time machine?

What is the difference between time capsule and time machine?

See Using Time Machine with a Time Capsule.

Integration between Time Management and Payroll

Similar Messages

Maybe you are looking for