Integration Broker Setup Problem

I'm trying to setup Integration Broker/AppMessaging between portal and finance databases. I'm able to set up the default local nodes in both Portal and Finance and am able to ping them correctly. I'm also able to configure the Remote Finance node in Portal and ping that correctly as well. However when I try to ping the Remote Portal node in Finance I get an error UserName not defined in database UserName not defined in database. (158,55) .
Not sure what I'm doing wrong. The username and password are correct and exist in Portal. Anyone have any idea what I might be doing wrong?
Also another thing which is kind of strange. If when I ping the remote Node in Portal I change the UserID to an ID I know does not exist in Portal I get a different error message. I also get the same error message if I change the password to something that's incorrect (*the error is username and password incorrect*). If both UserID and PWD are correct I get the UserName not defined in database error.
Thanks for all help in advance!!
Edited by: Dosteov on Sep 23, 2009 12:55 PM

Dosteov wrote:
Hey Jim. Both our local gateways have the same URL (/PSIGW/PeopleSoftListeningConnector). I'm not a system admin but I think the same WebServer is hosting both gateways. I think all the listening/target connectors are written in Java right? So I assume they each will have their own Listening/Target objects instantiated on the same WebServer.
We opened up a case with Oracle and they just got back to me yesterday and told me the same thing. To point both gateways to the higher PT version.Frankly speaking, I'm surprise, unless I misunderstand something.
1. it is not secure to share same webserver
2. I've never had to do that for cross-version messaging to make it working (unless this is specific of your both PT version)
Nicolas.

Similar Messages

Please help : Integration Broker setup issue.

Hello All,
I'm working on integrating Peoplesoft HRMS 9.0 with Peoplesoft ELM 9.0 with Peopletools 8.49. Referring PeopleBooks, I'm able to successfully setup;
1. Local and remote nodes (able to ping successfully)
2. Message
3. Nodes
4. Service operations and Security
5. Routings.
Next, when I open respective messages in application designer, the message definition properties USE tab is blank.
I'm not able to figure out the reason even after going through documents. I would appreciate if some one can help to figure out the reason.
Thanks,
TH

That is correct. IB was rewritten in 8.48. The Use tab is a
"hangover" to allow for converting from an earlier version to
8.48 and (within reason) a back convert.

'&' in Integration broker message

We are currently sending information from a third party system to PeopleSoft financials using Integration Broker and I have run into somewhat of an issue. The message from the outgoing system has a field called 'DESCRIPTION'. One of our messages recently failed because the message contained the following value for the description 'substations & switch yards'.
(Colon will be used instead of semicolon as the terminator for the escape sequence to keep the browser from unescaping the escape sequence.....)
The description looks like : <DESCRIPTION>substations &amp: switchyards </DESCRIPTION>
As I would expect the '&' symbol is escaped in the output.
The problem is PeopleSoft does not seem to be handling this correctly. When the message arrives PeopleSoft turns it into the following:
<?xml version="1.0"?>
<AsyncRequest>
<data PsNonXml="Yes">
<![CDATA[.........<DESCRIPTION>substations & switchyards </DESCRIPTION>
]]>
</data>
</AsyncRequest>
It appears to unescape the &amp: appropriately but then does not treat the resulting xml as valid. It says it is non PS xml.
If in the stylesheet I say <xsl:value-of select="//DESCRIPTION" disable-output-escaping="yes"/>
Then the message is successfully processed, meaning it is recognized as valid PeopleSoft xml but the description is truncated to become
<DESCRIPTION>substations </DESCRIPTION>
It appears the parser cannot parse the '&' symbol if it is not escaped.
I was hoping someone could verify that this is in fact the case and suggest a workaround if it is. In my opinion it is not the behavior that would be desired. It should handle the parsing of the &amp: correctly and treat the resulting xml as valid PS xml.
In our case there is a premium on the number of characters that can be sent therefore doing something like translating the '&' to the word 'and' in the stylesheet is not the ideal solution. It would also be possible to disallow the '&' from being entered in the description field of the source system but this is not ideal either given the same constraint as above.
I believe somewhere I read a suggestion to move the data to an attribute but I don't think this is a viable solution either. I would assume since something like CopyRowset and CopytRowsetDelta "copies all data from the source rowset to the like-named fields in the message object executing the method" that it would not transfer the description from the message to the record if it were in an attribute as opposed to text as a child of the element. Assuming it would even be valid according to the xsd to begin with.
Ryan

Hi Jim,
If I capture the output generated by the third party system, transform it locally using the xsl the resulting xml is in fact well formed. Also as long as the description does not contain any special characters the result of the transformed message from the third party system is successfully processed by PS. This leads me to believe it is a direct a result of the special characters and not the format of the message after being transformed. Given that we are using Oracle's SOA Suite I am also able to capture the payload after it is transformed and prior to being routed to PS and this confirms the local test as well. The '&' is properly escaped and should be handled not as a special character but as simple character data.
The structured vs. unstructured is an interesting idea. Hadn't thought of it but will let you and the community how it goes if I go that route.
I may take your advice and go home for the weekend :)
Thanks for the insight.
Ryan

Peoplesoft HCM 9.0 Integration with Oracle R12 through Integration Broker

We are having the two latest application at our site.
1 Peoplesoft HCM 9.0 for HR + Payroll
2 Oracle R12 for remaining business process like SCM + CRM
Now we have an requirement to transfer data between peoplesoft and oracle finacial.
presently we have written the interfaces to transfer data between these systems.
Can anyone suggest me that is it possible to transfer data between these two systems through Integration Broker ?
your suggestions are welcome.
Thanks
Parth

Thanks HakanBiroglu for the response.
I went through the post. I am aware of these steps.
But I need help on point 2.
2.There should be single sign on setup between these DB's
How to achieve this ?

I need to upgrade my 10.5.1 os on my G4/1.25 (I'm having some audio-midi setup problems), but it's a machine that is not connected to the internet. Do I have any options? Thanks!

Friends,
I'm having some audio-midi setup problems on my G4/1.25/10.5.1 machine. I'm thinking that a routine OS upgrade might help. However, this machine is not connected to the internet. Are there any alternate methods for upgrading system software? Thanks in advance!

OK, what you should do is download the updates on another machine and burn them to a disc. Start at this link http://support.apple.com/downloads/#leopard for downloads and find, among other things, the 10.5.8 combo updater that works on PPC machines, plus security, QuickTime and other updates. Going from 10.5.1 to 10.5.8, there will probably be a bunch of things that you should install. Being off the internet with the machine, you can't have Software Update sort it out, so something might get missed, unfortunately.
My suggestion is this: if it looks like you might need a download, get it onto that disc.

Setup problem, windows xp, firefox upgrade to 4 and asked to reboot but did not progress. keeps asking to restart even if I try to remove

setup problem, windows xp, firefox upgrade to 4 and asked to reboot but did not progress. keeps asking to restart even if I try to remove

Hi marsano,
Usually the only reason it will ask you to reboot is if there is a file that must be modified that the updater doesn't currently have access to. You should try running the Firefox program once as Administrator:
* Right-click the icon and choose ''Run as Administrator''
If that doesn't help then do a clean reinstall.
# Download a fresh copy of Firefox from the [http://www.mozilla.org/firefox/fx/ Mozilla download page] and save the file to the desktop.
# [[Uninstalling Firefox|Uninstall]] your current version of Firefox and remove the Firefox program folder before running the new installer.
# Run installer
Remember that you don't want to remove personal data when uninstalling. That way you'll still have your personal information.
Hopefully this helps!

Integration Directory(Configuration) Problem

Hi All,
I am facing one Probelm. I am working one the client through Citrix. I am not able to open Integration Directory(Configuration Problem) . In onsite it's working fine. Reming all other applications(Integartion Repository and SLD and Runtime work bench) are working fine.
if I open Integration Directory i am getting this messge.
<jnlp spec="1.0+" codebase="http://filp55.group.upm-kymmene.com:50100/dir">
    <information>
        <title>Integration Builder</title>
        <vendor>SAP AG</vendor>
        <homepage href="http://www.sap.com" />
        <description type="one-line">Directory</description>
        <description type="short">Directory</description>
        <description type="tooltip">Directory</description>
        <icon hight="64" href="start/graphics/sap6464.gif" type="splash" width="64" />
        <icon hight="32" href="start/graphics/SAP3232.gif" width="32" />
    </information>
    <security>
        <all-permissions />
    </security>
    <resources>
        <j2se version="1.4+" initial-heap-size="32m" max-heap-size="1024m" />
        <jar href="directory/aii_ibdir_client.jar" />
        <jar href="directory/aii_ibdir_core.jar" />
        <jar href="directory/aii_ibdir_sbeans.jar" />
        <jar href="directory/aii_ibdir_rb.jar" />
        <jar href="directory/aii_ib_client.jar" />
        <jar href="directory/aii_ib_core.jar" />
        <jar href="directory/aii_ib_sbeans.jar" />
        <jar href="directory/aii_ib_rb.jar" />
        <jar href="directory/aii_util_icons.jar" />
        <jar href="directory/aii_util_swing.jar" />
        <jar href="directory/aii_util_xml.jar" />
        <jar href="directory/aii_util_xsd.jar" />
        <jar href="directory/aii_utilxi_misc.jar" />
        <jar href="directory/aii_util_rb.jar" />
        <jar href="directory/clientaii_ib_sbeans.jar" />
        <jar href="directory/clientaii_ibdir_sbeans.jar" />
        <jar href="directory/frog.jar" />
        <jar href="directory/focus14.jar" />
        <jar href="directory/sapxmltoolkit.jar" />
        <jar href="directory/jta.jar" />
        <jar href="directory/ejb20.jar" />
        <jar href="directory/exception.jar" />
        <jar href="directory/logging.jar" />
        <jar href="directory/guidgenerator.jar" />
        <jar href="directory/jperflib.jar" />
        <jar href="directory/sapni.jar" />
        <jar href="directory/sapj2eeclient.jar" />
        <property name="sap.theme" value="Streamline" />
        <property name="jnlp.log.initialConfiguration" value="FILE, SIMPLE" />
    <property name="jnlp.com.sap.aii.ib.client.properties" value="com.sap.aii.ib.client., com.sap.aii.ib.core., com.sap.aii.util.xml., com.sap.aii.connect., com.sap.aii.repository.mapping.additionaltypes, com.sap.aii.docu., com.sap.aii.ibrep.core., com.sap.aii.ibdir.core.*" /><property name="jnlp.com.sap.aii.connect.integrationserver.r3.sysnr" value="01" /><property name="jnlp.com.sap.aii.connect.landscape.contextroot" value="sld" /><property name="jnlp.com.sap.aii.connect.cr.name" value="filp40.group.upm-kymmene.com" /><property name="jnlp.com.sap.aii.ib.client.content.languages" value="EN,DE" /><property name="jnlp.com.sap.aii.connect.repository.contextroot" value="rep" /><property name="jnlp.com.sap.aii.ib.client.login.languages" value="EN,DE" /><property name="jnlp.com.sap.aii.connect.directory.rmiport" value="50104" /><property name="jnlp.com.sap.aii.connect.cr.contextroot" value="sld" /><property name="jnlp.com.sap.aii.connect.rwb.r3.client" value="790" /><property name="jnlp.com.sap.aii.connect.directory.contextroot" value="dir" /><property name="jnlp.com.sap.aii.connect.rwb.contextroot" value="rwb" /><property name="jnlp.com.sap.aii.connect.landscape.httpsport" value="@com.sap.aii.server.httpsport.lcr@" /><property name="jnlp.com.sap.aii.connect.repository.rmiport" value="50104" /><property name="jnlp.com.sap.aii.connect.repository.httpport" value="50100" /><property name="jnlp.com.sap.aii.connect.directory.name" value="filp55.group.upm-kymmene.com" /><property name="jnlp.com.sap.aii.connect.cr.httpsport" value="@com.sap.aii.server.httpsport.cr@" /><property name="jnlp.com.sap.aii.connect.repository.name" value="filp55.group.upm-kymmene.com" /><property name="jnlp.com.sap.aii.connect.integrationserver.contextroot" value="run" /><property name="jnlp.com.sap.aii.connect.integrationserver.name" value="filp55.group.upm-kymmene.com" /><property name="jnlp.com.sap.aii.connect.rwb.httpsport" value="@com.sap.aii.connect.rwb.httpsport@" /><property name="jnlp.com.sap.aii.connect.landscape.httpport" value="50000" /><property name="jnlp.com.sap.aii.docu.languages" value="null" /><property name="jnlp.com.sap.aii.ib.client.jnlp.j2se.initialheapsize" value="32m" /><property name="jnlp.com.sap.aii.util.xml.parserFactory" value="com.sap.engine.lib.jaxp.SAXParserFactoryImpl" /><property name="jnlp.com.sap.aii.connect.directory.httpport" value="50100" /><property name="jnlp.com.sap.aii.connect.directory.httpsport" value="@com.sap.aii.server.httpsport.directory@" /><property name="jnlp.com.sap.aii.connect.integrationserver.r3.httpport" value="8001" /><property name="jnlp.com.sap.aii.connect.rwb.name" value="filp55.group.upm-kymmene.com" /><property name="jnlp.com.sap.aii.connect.integrationserver.r3.client" value="790" /><property name="jnlp.com.sap.aii.connect.cr.httpport" value="50000" /><property name="jnlp.com.sap.aii.connect.landscape.name" value="filp40.group.upm-kymmene.com" /><property name="jnlp.SAPMYNAME" value="filp55_GTX_01" /><property name="jnlp.com.sap.aii.connect.rwb.httpport" value="50100" /><property name="jnlp.com.sap.aii.docu.url" value="null" /><property name="jnlp.com.sap.aii.ib.client.applicationname.directory" value="sap.com/com.sap.xi.directory/" /><property name="jnlp.com.sap.aii.util.xml.transformerFactory" value="com.sap.engine.lib.jaxp.TransformerFactoryImpl" /><property name="jnlp.com.sap.aii.ib.client.applicationname.repository" value="sap.com/com.sap.xi.repository/" /><property name="jnlp.com.sap.aii.ib.client.login.InitialContextFactory" value="com.sap.engine.services.jndi.InitialContextFactoryImpl" /><property name="jnlp.com.sap.aii.connect.integrationserver.httpport" value="50100" /><property name="jnlp.client" value="true" /><property name="jnlp.com.sap.aii.connect.repository.httpsport" value="@com.sap.aii.server.httpsport.repository@" /><property name="jnlp.com.sap.aii.ib.client.jnlp.j2se.maxheapsize" value="1024m" /><property name="jnlp.com.sap.aii.connect.integrationserver.httpsport" value="@com.sap.aii.connect.integrationserver.httpsport@" /><property name="jnlp.com.sap.aii.connect.integrationbuilder.startpage.url" value="rep/start/index.jsp" /><property name="jnlp.com.sap.aii.connect.integrationserver.r3.httpsport" value="@com.sap.aii.connect.integrationserver.r3.httpsport@" /><property name="jnlp.com.sap.aii.connect.rwb.r3.sysnr" value="01" /><property name="jnlp.com.sap.aii.util.xml.schemaValidator" value="com.sap.engine.lib.schema.validator.SchemaValidator" /><property name="jnlp.rc.release" value="7_00" /><property name="jnlp.rc.applname" value="DIRECTORY" /><property name="jnlp.rc.supportpackage" value="09" /><property name="jnlp.rc.synctime" value="${sync.time}" /></resources>
    <application-desc main-class="com.sap.aii.ibdir.gui.appl.ApplicationImpl">
        <argument>webstart</argument>
    </application-desc>
</jnlp>
Please help me on this..........
Thanks in Advacne.
Regards,
Chandra

Hello,
1)
May be the problem is a network connectivity issue. Do one thing copy the "cahce" folder from some other client PC(which has successfully opened IR and ID) to your client PC. The folder resides in "C:Documents and Settings<yourUserProfile>Application DataSunJavaDeploymentjavaws".
Copy "cache" folder to your client PC under the above path.
/people/shabarish.vijayakumar/blog/2006/02/13/unable-to-open-iresrid-xipipi-71-updated-for-pi-71-support
https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/1688 [original link is broken] [original link is broken] [original link is broken]
2) Go to http://filp55.group.upm-kymmene.com:50100/rep/
Click on Administration -> Java Web Start -> Java Web Start Administration ->
Try
1. Re-initialization (then try logging)
2. Re-initialization and force-signing (then try logging)
3. Delete lock (then try logging)
Do this for IR and ID tabs.
3) Check can be a firewall issue.
4) Check wether sufficient roles have been assigned -> Tcode -> SU01 -> roles tab. These roles need to be assigned to your username
SAP_BC_AI_LANDSCAPE_DB_RFC
SAP_SLD_CONFIGURATOR
SAP_SLD_DEVELOPER
SAP_XI_BPE_CONFIGURATOR_ABAP
SAP_XI_BPE_MONITOR_ABAP
SAP_XI_DEVELOPER
SAP_XI_DEVELOPER_ABAP
SAP_XI_DEVELOPER_J2EE
SAP_XI_MONITOR
SAP_XI_MONITOR_ABAP
SAP_XI_MONITOR_J2EE
<b>*******************Reward,if found useful</b>
Edited by: BVS on May 7, 2008 3:01 PM

How to Send a .txt file through FTPTARGET connector of Integration Broker

Hi,
Is it possible to send a .txt file(infact anyfile other than xml format) to a host server using FTP Target connector of Integration Broker. If so can someone explain the steps to achieve it.
Regards,
Uday

Yes, you can do that. I've done exactly that couple years ago.
If I remember currently, below is a high level of how I did it.
Read the file you want to send into the buffer using GetString function like:
+/*A single string containing the entire contents of the file including line terminator.+
+ After this method completes successfully, the temp file is deleted.*/+
+&FileData = &FiletoRead.GetString();+
The function deletes the file so I had to create a temp copy of what i want to send and read that copy instead of the original file. Also, IB will have issues if you are trying to send an empty file. so i did a basic check, if the file is empty then put something in it.
rem -- IB message will fail if we are trying to send an empty file;
If None(&FileData) Or
+&FileData = "" Or+
+&FileData = " " Then+
MessageBox(0, "", 0, 0, ("File " | &sTargetFileName | " is empty."));
+&FileData = "No Data Found!";+
End-If;
Next, you need to load the file data that are now in &FileData to IB:
+&MSG = CreateMessage(@&sServiceOperation);+
+/* Generate the XML doc. */+
+&dFtp = CreateXmlDoc("");+
rem -- &bReturn = &dFtp.LoadIBContent("Some text inside of a file to send through IB!");
+&bReturn = &dFtp.LoadIBContent(&FileData);+
Then put XML into the message and publish it:
+/*put the XML in the message*/+
+&MSG.SetXmlDoc(&dFtp);+
+%IntBroker.Publish(&MSG);+
You might need to load some IBConnectorInfo and override them using your PC. I had to do that to get the password for the FTP transmission encrypted:
/* Encrypt the password */
&pscipher = CreateJavaObject("com.peoplesoft.pt.integrationgateway.common.EncryptPassword");
&encPassword = &pscipher.encryptPassword(&sPassword);
&pscipher = Null;
Good luck and hope this helps.

PeopleSoft Integration Broker from FSCM9 [PT8.48] to CRM9 [PT8.49]

Dear Team,
We are trying to integrate between Finance 9 with PT 8.48 to CRM9 with PT 8.49 using Integration Broker. We followed the following steps
1. Configured the "LOCAL" Gateway which was successfully pinging in both the instances finance9 and crm9 and the domain status is active in both the
instances. We are using "PSFTTARGET co"nnector
2. Configured the default local node PSFT_EP in FSCM9 and PSFT_CR in CRM9 instances and successfully pinging the node.
3. For remote node, we are using PSFT_CR node in FSCM9 portal and PSFT_EP in CRM9 portal which are failing to ping.
4. Defined custom Message,custom queue, custom Services, custom Service operations, custom routing in FSCM9 portal.
5. We defined custom fields, custom records, custom pages, custom components, custom menu and successfully registed with the portal with Public access
in FSCM9 portal.
6. Now we are trying to add new values or add new record in the newly customized page in FSCM9 and trying to get the same record values in CRM9 database
using Integration broker with above integration configuration.
Can you please help with appropriate screenshots for the integrations between FSCM9 and CRM9
Require Screenshots for
1. How to configure the remote nodes.
2. How to configure Routings
3. How to configure Queue
4. How to assign custom message into custom message channel
5. What to configure in the PSAAPSRV.cfg and PSAAPSRV.ubx ?
6. What are the configurations required in "Main Menu > PeopleTools >Integration Broker > Configuration > Service configuration"

Hi,
Pls ensure you have the following in place...
1. All nodes being used for Integration should be defined on the Single Sign On Page in both the env's.
2. The passwords on all the 4 nodes should be same.
3. The external Alias of the Sv Ops in question should be identical.
4. Ensure that the User ID's initiating the request should be defined in the Target env along with access to that Sv Op and have the PeopleSoft User role.
What is the error message you are getting when you try pinging the nodes?
Also, the Sv Ops should be granted access preferably to the PL that the Role PeopleSoft User uses (PTPT1000). In case you have custom security in place then kindly refer to your security matrix to identify the correct PL...
Would also like to point out that in most of the Async Integrations its advisable to use existing queues, unless you have very specific purpose to use your custom queue.
Thanks!
Prashant

Vendors in Integration Broker

Peopletools 8.49.05
HCM 9.0 and Fins 9.0
In Integration Broker, we have a service operation vendor_sync set up between fins and hcm. All Vendor transactions are showing up as moving successully from fins to hcm. All vendors, however, are not required to go to HCM and they are not showing up in the HCM database (which is fine) -- but -- my question is : Why do all vendors have to go through IB if only those for HCM are required?
Edited by: chiqid on Oct 29, 2009 6:19 AM
Edited by: chiqid on Oct 29, 2009 8:12 AM

Hi Jim,
If I capture the output generated by the third party system, transform it locally using the xsl the resulting xml is in fact well formed. Also as long as the description does not contain any special characters the result of the transformed message from the third party system is successfully processed by PS. This leads me to believe it is a direct a result of the special characters and not the format of the message after being transformed. Given that we are using Oracle's SOA Suite I am also able to capture the payload after it is transformed and prior to being routed to PS and this confirms the local test as well. The '&' is properly escaped and should be handled not as a special character but as simple character data.
The structured vs. unstructured is an interesting idea. Hadn't thought of it but will let you and the community how it goes if I go that route.
I may take your advice and go home for the weekend :)
Thanks for the insight.
Ryan

Integration Broker Application Messages Issue

Hi Gurus,
We are having an issue with the Integration Broker Application Messages.
Here's the issue, when we run Dynrole it process Application Messages. All messages go to Done status, but checking the instance, the Footer comes first, where the header should comes first. This issue happens from time to time, we only run 8 application messages at a time (header and footer included). BTW, failover is enabled on our server.
We are trying to find a solution on this, please help us.
Thanks,
Red

Hi,
Did it resolved? If yes, please share here if possible.
Cheers,
Elvis.

Issue synchronizing with Integration Broker

I need some guidance in troubleshooting XenApp integration with VMware Workspace 2.1. It seems like I have successfully installed and configured the Integration broker.
I followed the steps from the installation guide.
Verify PowerShell remoting.
This sample command string applies to Citrix Server Farm 6.5.
Get-XAApplication -ComputerName CITRIX SERVER NAME
-> Works!
Type http://hostname /IB/API/RestServiceImpl.svc/ibhealthcheck to verify that the Integration Broker Web application is running.
The expected output displays.
All ok
Type https://hostname /IB/API/RestServiceImpl.svc/ibhealthcheck to verify that the Integration Broker Web application is running.
The expected output displays.
All ok
_> Works!
But then I added the Integration broker to the workspace portal and when I press "Sync Now" I get the message:
Calculating sync actions.
This takes a long time. When I look at the troubleshooting tab I see the following error:
Failed Sync Action: Could not pull objects from Integration Broker.
I use a self signed certificate on the Integration Broker. Any tips on how to troubleshoot, what to check?
I'm using Windows 2012R2 with IIS 8.5. I'm not sure if that is supported.

The IB healthcheck results seem ok indicating that the IB has been installed properly.
We need to check if the IB is able to communicate with the XenFarm server properly and able to fetch the resources and entitlements.
Please refer to the Workspace Documentation - Setting Up Resources in VMware Workspace Portal > Troubleshooting Workspace Resource Configuration ->
Citrix-Published Resources Are Not Available in Workspace.
Please follow instructions here to check if the IB is able to contact the xen farm server. Please send us the IB and connector logs when the failure happens.

Simple VISA Setup Problem

Hi all,
I'm having issues working with VISA in LabVIEW. Previously, I've used Peek/Poke VIs (before they were VISA VIs) that allowed me to read and write directly to registers at a given Windows address. I have a new, custom PCI Express board that uses the same architecture that I've worked with previously only this time I'm trying to access the registers using VISA.
As this is my first time using VISA, I'm having some setup problems. Yesterday I got to a state where logically things should work but I still end up getting an error when I try to run a simple VISA Open command (see attached screenshot).
The initial problem I had was I was not able to acquire a VISA resource that opens a session to my PCIe board...it would simply not show up on the resource list. After reading around I discovered I needed to create a custom VISA driver for my board. Once I did that using the VISA Driver Wizard, the device showed up in my list (as seen in the screenshot). I wrote the simplest of all VIs where I simply open that VISA resource, however, the error seen in the screenshot is produced.
I'm pretty sure this is a simple setup issue, but does anyone know what I'm doing wrong?
Attachments:
Screenshot1.JPG ‏145 KB

Hi bonhomme,
I see you're having some issues using VISA. It sounds like you're new to VISA, so I wanted to pass along some information that we have availble on this software. This link gives good general information about VISA, and the related links are extremely helpful in finding specific issues.
Thank you for attaching your error. This is extremely helpful in debugging since we can actually see the numbers. There is another forumn that talks about these at this link and at this link.
Hope this helps you out!!
Lea D.
Applications Engineering
National Instruments

Integration builder login problem

hi all,
i am not able to login into integation builder,while i am trying to open the integration builder,it is giving
the error, i.e ERROR com.sap.aii.utilxi.swing.toolkit.ExceptionDialog: Throwable
Thrown:
MESSAGE ID: com.sap.aii.utilxi.misc.api.ReconnectRuntimeException
com.sap.aii.utilxi.misc.api.ReconnectRuntimeException:
please help me what could be the problem,
regards,
subba reddy

Hi Reddy,
Possible checks
1) Have you added the Host file in the following path
C:\WINDOWS\system32\drivers\etc--Hosts
2) Ping the IP address of the XI Server from Your Local Machine whcih you are trying to conect.
3) Check whether you have Installes the J2SDK on Your Local Machine
to check goto Run-cmd--java -version
Refer these threads same exception came here and It was solved.
Re: Integration Repository and Integration Directory access problem.
cannot connect to server using message server ms://host:8120/P4
Thanks.

Error while installing B1 Integration Addon Setup

Dear All,
        Myself working on SAP B1 8.81 PL 7. Now When I am installing B1 Integration Addon Setup, I am receiving the below error.
        Failed to install SAP Business One Integration Service.
        Kindly help.
Regards
Hitesh Parsawala

Hi,
Please refer to link
<a class="jive_macro jive_macro_message" href="" __jive_macro_name="message" modifiedtitle="true" __default_attr="10642347"></a>
Make sure to backup your database first or do it your test server.
Thanks.
Clint

Integration Broker Setup Problem

Similar Messages

Maybe you are looking for