Integration Builder address not maintained
When I go to https://<servername>:port/exchangeProfile
I don't see any setting, anybody who can help me,
Thanks
Jagraj Dhillon
Hi Peter,
1) Were you able to open in exchange profile?
To findout, try the following URL
http://<hostname>:<port>/exchangeProfile
2) Make sure to check connection parameters in Exchange Profile and the following values are set
com.sap.aii.connect.repository.name
com.sap.aii.connect.repository.httpport
3)Make sure your J2EE server is running. You can find out by going to the URL http://hostname:50000.
Also complete all your post installation activities.
Hope this helps.
Rgds,
Sam Raju
Similar Messages
-
ABAP Proxy Error - Integration Builder address not maintained
I intend to use ABAP proxy between R/3 (ECC 6.0) and XI (PI 7.0).
On configuring the relevant connections, I run SPROXY and get the following error:
Integration Builder address is not maintained in the Exchange profile (Connections)
I have created the connx LCRSAPRFC & SAPSLDAPI from R/3 to PI but the connectivity does not work.
On running the reports
SPROX_CHECK_IFR_RESPONSE
SPROX_CHECK_HTTP_COMMUNICATION
SPROX_CHECK_IFR_ADDRESS
SPROX_CHECK_IFR_CONNECTION
My question is:
What is the Program to be used in LCRSAPRFC & SAPSLDAPI? I have used LCRSAPRFC_<sys id of XI server>
and SAPSLDAPI_<sys id of XI server>
Should the XI Integration Builder address be maintained in R/3?
If yes, is there any place where IB address can be maintained in R/3 (I believe there is no such thing as exchange profile in R/3. then how can IB address be maintained in R/3??...pls correct if I am wrong)
If IB address of XI has to be maintained in R/3 then can anyone pls tell me how to do it?Just recheck the steps with this and come up with doubts then
How do you activate ABAP Proxies?
Regards,
Prateek -
Intigration builder address not maintained error
Hi All,
While accessing intigration builder in ECC5, i am getting the following error.
"Intigration Builder address not maintened"
Along with this error teh following directory was opened automatically..
"C:\Documents and Settings\sundaramj\SapWorkDir"
can any one provide solution for this problem?
regards,
sundaramjHi,
Are you getting this error in the Browser ?
These blogs will help you on the logon issuses-
https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/1688 [original link is broken] [original link is broken] [original link is broken] [original link is broken] [original link is broken] [original link is broken] [original link is broken]
/people/shabarish.vijayakumar/blog/2006/02/13/unable-to-open-iresrid-xipipi-71-updated-for-pi-71-support
Integration Builder Address not maintained
REgards,
Moorthy -
Logon Error Message - Enterprise Services Builder address not maintained
Hi Experts,
I'm about to start the configuration on PI PROD (PI 7.1) server, but I keep encountering an error, saying "Service cannot be reached"
Service cannot be reached
What has happened?
URL http://hostname:port/nwa call was terminated because the corresponding service is not available.
Note
The termination occurred in system PIP with error code 404 and for the reason Not found.
The selected virtual host was 0 .
What can I do?
Please select a valid URL.
If it is a valid URL, check whether service /nwa is active in transaction SICF.
If you do not yet have a user ID, contact your system administrator.
ErrorCode:ICF-NF-http-c:000-u:SAPSYS-l:E-i:XXXXX_PIP_00-v:0-s:404-r:Notfound
HTTP 404 - Not found
Your SAP Internet Communication Framework Team
What's more weird is that I can't launch sxmb_ifr because 'Enterprise Services Builder address not maintained'.
I already made some RFC Destination such as AI_DIRECTORY_JCOSERVER, AI_RUNTIME_JCOSERVER, LCRSAPRFC, and SAPSLDAPI and when I test the connection, here's the error message said 'Error when opening an RFC connection (CPIC-CALL: 'ThSAPOCMINIT' : cmRc=2 thRc=67'
Thanks for the reply.Hello,
Check if you have more than one system. If so, check whether host, port and URL of startpage are maintained on the correct one.
Also, please follow the MANUAL steps of the SAP Help link below:
http://help.sap.com/saphelp_nw2004s/helpdata/en/a0/40084136b5f423e10000000a155106/content.htm
Ensure you have created the RFC Destinations in the ABAP and Java Environment
You need to create the following RFC destinations in transaction SM59
(ABAP) and the Visual Administrator (Java):
AI_RUNTIME_JCOSERVER
AI_DIRECTORY_JCOSERVER
LCRSAPRFC
SAPSLDAPI
Last, please check whether, In tcode SM59, the destination INTEGRATION_DIRECTORY_HMI.
The user maintained in the Logon tab should be PIISUSER
and ensure he password is correct,and check if the destination will test successfully.
All of those will solve this issue
Regards,
Caio Cagnani -
SPORXY Integration Builder data not understood
Hello everybody,
I want to connect a 6.20 System to our XI 7.0 (SP13). The Integration Engine in the 6.20 is maintained correctly (Application System, Destination works), the sldcheck works fine.
I use the table SPROXSET instead of the exchangeprofile. The profile is empty, the SPROXSET has an valid entry (IFR_ADDRESS: http://systemDNSName:57000/rep).
The SPROX_CHECK_HTTP_COMMUNICATION says: HTTP communication functioning
But the test =>Check with report SPROX_CHECK_IFR_RESPONSE and ==>Check with report SPROX_CHECK_IFR_CONNECTION both show the failure: Integration Builder data not understood
Normally I connect 6.40 Systems to the XI, they work without a problem. Is there something special with 6.20 Systems?
Regards,
Thomas
Edited by: Thomas Weinschenk on Apr 1, 2008 10:04 AMThe Add-On is isntalled.
I found out something else. When I try the Connection Test No.3 - SPROX_CHECK_IFR_RESPONSE (in the SPROXY), the IE opens the following Url:
http://myHost:57000/rep/ifraccess?service=query&type=namespace
and I get a HTTP 404 Error. What is the correct Adress here?
Regards,
Thomas
Edited by: Thomas Weinschenk on Apr 4, 2008 4:49 PM -
Integration Builder data not understood - Problem
Hi all,
i have a problem with XI.
I want to generate Proxies from XI Content in a SAP System.
in SPROXY i can't see any data from the repository.
SLDCHECK runs successfully.
If i run SPROX_CHECK_IFR_CONNECTION i get the failure message "Integration Builder data not understood". I have already changed all passwords for the service users in XI and Exchange Profile.
can you give me a hint what the problem could be ?
br,
martinHi martin,
Make sure your business system is set up as follows:
1. Transaction SXMB_ADM
- Role of System: Application System
- Corresponding Integration Server:
dest://<your_sm59_http_destination>
2. Ensure that the RFC destinations LCRSAPRFC and SAPSLDAPI are
maintained and working
3. Run SLDCHECK to verify that the connection to the System Landscape
Directory works.
4. Check that the Integration Repository is running and data is maintained there.
check out the 18th page of this link
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/bd5950ff-0701-0010-a5bc-86d45fd52283
Message was edited by:
MANIKANDAN subash chandran
Message was edited by:
MANIKANDAN subash chandran -
Error: Integration Builder can not start
Hi,
Before installing SP 12 XI worked fine.
But while deploying with the SDM I got an error when I want to deploy this file "SAPXITOOL12P_5-20000274.SCA".
So when I start the intergration Builder, Web Start shows an error like "Integration Builder can not start?
Can anybody help me??
Thanks.
Regards
StefanHi Shravan,
it is a really big one:
Starting Deployment of com.sap.xi.rwb
Aborted: development component 'com.sap.xi.rwb'/'sap.com'/'SAP
AG'/'3.0.1220050720142859.0000':
Caught exception during application deployment from SAP J2EE Engine's
deploy service:
java.rmi.RemoteException: Cannot deploy application
sap.com/com.sap.xi.rwb.. Reason: Errors while
compiling:D:/usr/sap/XI3/DVEBMGS00/j2ee/cluster/server0/apps/sap.com/com.sap.xi.rwb/EJBContainer/temp/temp1127721952087/com/sap/aii/mdt/server/MessageMonitoringObjectImpl10.java:13:
com.sap.aii.mdt.server.MessageMonitoringObjectImpl10 is not abstract
and does not override abstract method getLoggingAttributes
(java.lang.String) in com.sap.aii.mdt.server.MessageMonitoring
public class MessageMonitoringObjectImpl10 extends
com.sap.engine.services.ejb.session.stateful.StatefulEJBObjectImplFP
implements MessageMonitoring {
^
D:/usr/sap/XI3/DVEBMGS00/j2ee/cluster/server0/apps/sap.com/com.sap.xi.rwb/EJBContainer/temp/temp1127721952087/com/sap/aii/mdt/server/MessageMonitoringObjectImpl10.java:1112: setRwb(boolean) in
com.sap.aii.mdt.server.MessageMonitoringObjectImpl10 cannot implement
setRwb(boolean) in com.sap.aii.mdt.server.MessageMonitoring; overridden
method does not throw
com.sap.aii.mdt.api.exceptions.OperationFailedException
public void setRwb(boolean arg1) throws java.rmi.RemoteException
^
D:/usr/sap/XI3/DVEBMGS00/j2ee/cluster/server0/apps/sap.com/com.sap.xi.rwb/EJBContainer/temp/temp1127721952087/com/sap/aii/mdt/server/MessageMonitoringObjectImpl10.java:412: setDomain(java.lang.String) in
com.sap.aii.mdt.server.MessageMonitoringObjectImpl10 cannot implement
setDomain(java.lang.String) in
com.sap.aii.mdt.server.MessageMonitoring; overridden method does not
throw com.sap.aii.mdt.api.exceptions.OperationFailedException
public void setDomain(java.lang.String arg1) throws
java.rmi.RemoteException
^
D:/usr/sap/XI3/DVEBMGS00/j2ee/cluster/server0/apps/sap.com/com.sap.xi.rwb/EJBContainer/temp/temp1127721952087/com/sap/aii/mdt/server/MessageMonitoringObjectImpl10.java:740: getMessageData(java.lang.String) in
com.sap.aii.mdt.server.MessageMonitoringBean cannot be applied to
(java.lang.String,boolean)
result = ((IntegrationEngineMonitoringBean)ctx.getInstance
()).getMessageData( arg1, arg2);
^
D:/usr/sap/XI3/DVEBMGS00/j2ee/cluster/server0/apps/sap.com/com.sap.xi.rwb/EJBContainer/temp/temp1127721952087/com/sap/aii/mdt/server/MessageMonitoringObjectImpl10.java:786: cannot resolve symbol
symbol : method getMessageList ()
location: class
com.sap.aii.mdt.server.integrationengine.IntegrationEngineMonitoringBean result = ((IntegrationEngineMonitoringBean)ctx.getInstance
()).getMessageList();
^
D:/usr/sap/XI3/DVEBMGS00/j2ee/cluster/server0/apps/sap.com/com.sap.xi.rwb/EJBContainer/temp/temp1127721952087/com/sap/aii/mdt/server/MessageMonitoringObjectImpl10.java:1092: getLoggingAttributes(java.lang.String) in
com.sap.aii.mdt.server.MessageMonitoringBean cannot be applied to
(java.lang.String,boolean)
result = ((IntegrationEngineMonitoringBean)ctx.getInstance
()).getLoggingAttributes( arg1, arg2);
^
D:/usr/sap/XI3/DVEBMGS00/j2ee/cluster/server0/apps/sap.com/com.sap.xi.rwb/EJBContainer/temp/temp1127721952087/com/sap/aii/mdt/server/MessageMonitoringObjectImpl10.java:1217: cannot resolve symbol
symbol : method hasVersions ()
location: class
com.sap.aii.mdt.server.integrationengine.IntegrationEngineMonitoringBean result = ((IntegrationEngineMonitoringBean)ctx.getInstance
()).hasVersions();
^
D:/usr/sap/XI3/DVEBMGS00/j2ee/cluster/server0/apps/sap.com/com.sap.xi.rwb/EJBContainer/temp/temp1127721952087/com/sap/aii/mdt/server/MessageMonitoringObjectImpl10.java:1259: cannot resolve symbol
symbol : method getMessageVersions (java.lang.String,boolean)
location: class
com.sap.aii.mdt.server.integrationengine.IntegrationEngineMonitoringBean result = ((IntegrationEngineMonitoringBean)ctx.getInstance
()).getMessageVersions( arg1, arg2);
^
D:/usr/sap/XI3/DVEBMGS00/j2ee/cluster/server0/apps/sap.com/com.sap.xi.rwb/EJBContainer/temp/temp1127721952087/com/sap/aii/mdt/server/MessageMonitoringObjectImpl10.java:1305: cannot resolve symbol
symbol : method getPureMessageList ()
location: class
com.sap.aii.mdt.server.integrationengine.IntegrationEngineMonitoringBean result = ((IntegrationEngineMonitoringBean)ctx.getInstance
()).getPureMessageList();
^
D:/usr/sap/XI3/DVEBMGS00/j2ee/cluster/server0/apps/sap.com/com.sap.xi.rwb/EJBContainer/temp/temp1127721952087/com/sap/aii/mdt/server/MessageMonitoringObjectImpl10.java:1350: cannot resolve symbol
symbol : method getVersionDetailsUrl (java.lang.String)
location: class
com.sap.aii.mdt.server.integrationengine.IntegrationEngineMonitoringBean result = ((IntegrationEngineMonitoringBean)ctx.getInstance
()).getVersionDetailsUrl( arg1);
^
D:/usr/sap/XI3/DVEBMGS00/j2ee/cluster/server0/apps/sap.com/com.sap.xi.rwb/EJBContainer/temp/temp1127721952087/com/sap/aii/mdt/server/MessageMonitoringObjectImpl10.java:1392: cannot resolve symbol
symbol : method getFeedback ()
location: class
com.sap.aii.mdt.server.integrationengine.IntegrationEngineMonitoringBean result = ((IntegrationEngineMonitoringBean)ctx.getInstance
()).getFeedback();
^
D:/usr/sap/XI3/DVEBMGS00/j2ee/cluster/server0/apps/sap.com/com.sap.xi.rwb/EJBContainer/temp/temp1127721952087/com/sap/aii/mdt/server/MessageMonitoringObjectImpl10.java:1432: cannot resolve symbol
symbol : method setMaxMessages (int)
location: class
com.sap.aii.mdt.server.integrationengine.IntegrationEngineMonitoringBean ((IntegrationEngineMonitoringBean)ctx.getInstance
()).setMaxMessages( arg1);
^
D:/usr/sap/XI3/DVEBMGS00/j2ee/cluster/server0/apps/sap.com/com.sap.xi.rwb/EJBContainer/temp/temp1127721952087/com/sap/aii/mdt/server/IntegrationEngineHomeImpl10.java:11:
com.sap.aii.mdt.server.IntegrationEngineHomeImpl10 is not abstract and
does not override abstract method create() in
com.sap.aii.mdt.server.MessageMonitoringHome
public class IntegrationEngineHomeImpl10 extends
com.sap.engine.services.ejb.session.EJBHomeImpl implements
IntegrationEngineHome {
^
D:/usr/sap/XI3/DVEBMGS00/j2ee/cluster/server0/apps/sap.com/com.sap.xi.rwb/EJBContainer/temp/temp1127721952087/com/sap/aii/mdt/server/MessageMonitoringObjectImpl11.java:13:
com.sap.aii.mdt.server.MessageMonitoringObjectImpl11 is not abstract
and does not override abstract method getLoggingAttributes
(java.lang.String) in com.sap.aii.mdt.server.MessageMonitoring
public class MessageMonitoringObjectImpl11 extends
com.sap.engine.services.ejb.session.stateful.StatefulEJBObjectImplFP
implements MessageMonitoring {
^
D:/usr/sap/XI3/DVEBMGS00/j2ee/cluster/server0/apps/sap.com/com.sap.xi.rwb/EJBContainer/temp/temp1127721952087/com/sap/aii/mdt/server/MessageMonitoringObjectImpl11.java:1112: setRwb(boolean) in
com.sap.aii.mdt.server.MessageMonitoringObjectImpl11 cannot implement
setRwb(boolean) in com.sap.aii.mdt.server.MessageMonitoring; overridden
method does not throw
com.sap.aii.mdt.api.exceptions.OperationFailedException
public void setRwb(boolean arg1) throws java.rmi.RemoteException
^
D:/usr/sap/XI3/DVEBMGS00/j2ee/cluster/server0/apps/sap.com/com.sap.xi.rwb/EJBContainer/temp/temp1127721952087/com/sap/aii/mdt/server/MessageMonitoringObjectImpl11.java:412: setDomain(java.lang.String) in
com.sap.aii.mdt.server.MessageMonitoringObjectImpl11 cannot implement
setDomain(java.lang.String) in
com.sap.aii.mdt.server.MessageMonitoring; overridden method does not
throw com.sap.aii.mdt.api.exceptions.OperationFailedException
public void setDomain(java.lang.String arg1) throws
java.rmi.RemoteException
^
D:/usr/sap/XI3/DVEBMGS00/j2ee/cluster/server0/apps/sap.com/com.sap.xi.rwb/EJBContainer/temp/temp1127721952087/com/sap/aii/mdt/server/MessageMonitoringObjectImpl11.java:740: getMessageData(java.lang.String) in
com.sap.aii.mdt.server.MessageMonitoringBean cannot be applied to
(java.lang.String,boolean)
result = ((IntegrationServerMonitoringBean)ctx.getInstance
()).getMessageData( arg1, arg2);
^
D:/usr/sap/XI3/DVEBMGS00/j2ee/cluster/server0/apps/sap.com/com.sap.xi.rwb/EJBContainer/temp/temp1127721952087/com/sap/aii/mdt/server/MessageMonitoringObjectImpl11.java:786: cannot resolve symbol
symbol : method getMessageList ()
location: class
com.sap.aii.mdt.server.integrationserver.IntegrationServerMonitoringBean result = ((IntegrationServerMonitoringBean)ctx.getInstance
()).getMessageList();
^
D:/usr/sap/XI3/DVEBMGS00/j2ee/cluster/server0/apps/sap.com/com.sap.xi.rwb/EJBContainer/temp/temp1127721952087/com/sap/aii/mdt/server/MessageMonitoringObjectImpl11.java:1092: getLoggingAttributes(java.lang.String) in
com.sap.aii.mdt.server.MessageMonitoringBean cannot be applied to
(java.lang.String,boolean)
result = ((IntegrationServerMonitoringBean)ctx.getInstance
()).getLoggingAttributes( arg1, arg2);
^
D:/usr/sap/XI3/DVEBMGS00/j2ee/cluster/server0/apps/sap.com/com.sap.xi.rwb/EJBContainer/temp/temp1127721952087/com/sap/aii/mdt/server/MessageMonitoringObjectImpl11.java:1217: cannot resolve symbol
symbol : method hasVersions ()
location: class
com.sap.aii.mdt.server.integrationserver.IntegrationServerMonitoringBean result = ((IntegrationServerMonitoringBean)ctx.getInstance
()).hasVersions();
^
D:/usr/sap/XI3/DVEBMGS00/j2ee/cluster/server0/apps/sap.com/com.sap.xi.rwb/EJBContainer/temp/temp1127721952087/com/sap/aii/mdt/server/MessageMonitoringObjectImpl11.java:1305: cannot resolve symbol
symbol : method getPureMessageList ()
location: class
com.sap.aii.mdt.server.integrationserver.IntegrationServerMonitoringBean result = ((IntegrationServerMonitoringBean)ctx.getInstance
()).getPureMessageList();
^
D:/usr/sap/XI3/DVEBMGS00/j2ee/cluster/server0/apps/sap.com/com.sap.xi.rwb/EJBContainer/temp/temp1127721952087/com/sap/aii/mdt/server/MessageMonitoringObjectImpl11.java:1392: cannot resolve symbol
symbol : method getFeedback ()
location: class
com.sap.aii.mdt.server.integrationserver.IntegrationServerMonitoringBean result = ((IntegrationServerMonitoringBean)ctx.getInstance
()).getFeedback();
^
D:/usr/sap/XI3/DVEBMGS00/j2ee/cluster/server0/apps/sap.com/com.sap.xi.rwb/EJBContainer/temp/temp1127721952087/com/sap/aii/mdt/server/MessageMonitoringObjectImpl11.java:1432: cannot resolve symbol
symbol : method setMaxMessages (int)
location: class
com.sap.aii.mdt.server.integrationserver.IntegrationServerMonitoringBean ((IntegrationServerMonitoringBean)ctx.getInstance
()).setMaxMessages( arg1);
^
D:/usr/sap/XI3/DVEBMGS00/j2ee/cluster/server0/apps/sap.com/com.sap.xi.rwb/EJBContainer/temp/temp1127721952087/com/sap/aii/mdt/server/IntegrationServerHomeImpl10.java:11:
com.sap.aii.mdt.server.IntegrationServerHomeImpl10 is not abstract and
does not override abstract method create() in
com.sap.aii.mdt.server.MessageMonitoringHome
public class IntegrationServerHomeImpl10 extends
com.sap.engine.services.ejb.session.EJBHomeImpl implements
IntegrationServerHome {
^
24 errors
; nested exception is:
com.sap.engine.services.ejb.exceptions.deployment.EJBFileGenerat
ionException: Errors while
compiling:D:/usr/sap/XI3/DVEBMGS00/j2ee/cluster/server0/apps/sap.com/com.sap.xi.rwb/EJBContainer/temp/temp1127721952087/com/sap/aii/mdt/server/MessageMonitoringObjectImpl10.java:13:
com.sap.aii.mdt.server.MessageMonitoringObjectImpl10 is not abstract
and does not override abstract method getLoggingAttributes
(java.lang.String) in com.sap.aii.mdt.server.MessageMonitoring
public class MessageMonitoringObjectImpl10 extends
com.sap.engine.services.ejb.session.stateful.StatefulEJBObjectImplFP
implements MessageMonitoring {
^
D:/usr/sap/XI3/DVEBMGS00/j2ee/cluster/server0/apps/sap.com/com.sap.xi.rwb/EJBContainer/temp/temp1127721952087/com/sap/aii/mdt/server/MessageMonitoringObjectImpl10.java:1112: setRwb(boolean) in
com.sap.aii.mdt.server.MessageMonitoringObjectImpl10 cannot implement
setRwb(boolean) in com.sap.aii.mdt.server.MessageMonitoring; overridden
method does not throw
com.sap.aii.mdt.api.exceptions.OperationFailedException
public void setRwb(boolean arg1) throws java.rmi.RemoteException
^
D:/usr/sap/XI3/DVEBMGS00/j2ee/cluster/server0/apps/sap.com/com.sap.xi.rwb/EJBContainer/temp/temp1127721952087/com/sap/aii/mdt/server/MessageMonitoringObjectImpl10.java:412: setDomain(java.lang.String) in
com.sap.aii.mdt.server.MessageMonitoringObjectImpl10 cannot implement
setDomain(java.lang.String) in
com.sap.aii.mdt.server.MessageMonitoring; overridden method does not
throw com.sap.aii.mdt.api.exceptions.OperationFailedException
public void setDomain(java.lang.String arg1) throws
java.rmi.RemoteException
^
D:/usr/sap/XI3/DVEBMGS00/j2ee/cluster/server0/apps/sap.com/com.sap.xi.rwb/EJBContainer/temp/temp1127721952087/com/sap/aii/mdt/server/MessageMonitoringObjectImpl10.java:740: getMessageData(java.lang.String) in
com.sap.aii.mdt.server.MessageMonitoringBean cannot be applied to
(java.lang.String,boolean)
result = ((IntegrationEngineMonitoringBean)ctx.getInstance
()).getMessageData( arg1, arg2);
^
D:/usr/sap/XI3/DVEBMGS00/j2ee/cluster/server0/apps/sap.com/com.sap.xi.rwb/EJBContainer/temp/temp1127721952087/com/sap/aii/mdt/server/MessageMonitoringObjectImpl10.java:786: cannot resolve symbol
symbol : method getMessageList ()
location: class
com.sap.aii.mdt.server.integrationengine.IntegrationEngineMonitoringBean result = ((IntegrationEngineMonitoringBean)ctx.getInstance
()).getMessageList();
^
D:/usr/sap/XI3/DVEBMGS00/j2ee/cluster/server0/apps/sap.com/com.sap.xi.rwb/EJBContainer/temp/temp1127721952087/com/sap/aii/mdt/server/MessageMonitoringObjectImpl10.java:1092: getLoggingAttributes(java.lang.String) in
com.sap.aii.mdt.server.MessageMonitoringBean cannot be applied to
(java.lang.String,boolean)
result = ((IntegrationEngineMonitoringBean)ctx.getInstance
()).getLoggingAttributes( arg1, arg2);
^
D:/usr/sap/XI3/DVEBMGS00/j2ee/cluster/server0/apps/sap.com/com.sap.xi.rwb/EJBContainer/temp/temp1127721952087/com/sap/aii/mdt/server/MessageMonitoringObjectImpl10.java:1217: cannot resolve symbol
symbol : method hasVersions ()
location: class
com.sap.aii.mdt.server.integrationengine.IntegrationEngineMonitoringBean result = ((IntegrationEngineMonitoringBean)ctx.getInstance
()).hasVersions();
^
D:/usr/sap/XI3/DVEBMGS00/j2ee/cluster/server0/apps/sap.com/com.sap.xi.rwb/EJBContainer/temp/temp1127721952087/com/sap/aii/mdt/server/MessageMonitoringObjectImpl10.java:1259: cannot resolve symbol
symbol : method getMessageVersions (java.lang.String,boolean)
location: class
com.sap.aii.mdt.server.integrationengine.IntegrationEngineMonitoringBean result = ((IntegrationEngineMonitoringBean)ctx.getInstance
()).getMessageVersions( arg1, arg2);
^
D:/usr/sap/XI3/DVEBMGS00/j2ee/cluster/server0/apps/sap.com/com.sap.xi.rwb/EJBContainer/temp/temp1127721952087/com/sap/aii/mdt/server/MessageMonitoringObjectImpl10.java:1305: cannot resolve symbol
symbol : method getPureMessageList ()
location: class
com.sap.aii.mdt.server.integrationengine.IntegrationEngineMonitoringBean result = ((IntegrationEngineMonitoringBean)ctx.getInstance
()).getPureMessageList();
^
D:/usr/sap/XI3/DVEBMGS00/j2ee/cluster/server0/apps/sap.com/com.sap.xi.rwb/EJBContainer/temp/temp1127721952087/com/sap/aii/mdt/server/MessageMonitoringObjectImpl10.java:1350: cannot resolve symbol
symbol : method getVersionDetailsUrl (java.lang.String)
location: class
com.sap.aii.mdt.server.integrationengine.IntegrationEngineMonitoringBean result = ((IntegrationEngineMonitoringBean)ctx.getInstance
()).getVersionDetailsUrl( arg1);
^
D:/usr/sap/XI3/DVEBMGS00/j2ee/cluster/server0/apps/sap.com/com.sap.xi.rwb/EJBContainer/temp/temp1127721952087/com/sap/aii/mdt/server/MessageMonitoringObjectImpl10.java:1392: cannot resolve symbol
symbol : method getFeedback ()
location: class
com.sap.aii.mdt.server.integrationengine.IntegrationEngineMonitoringBean result = ((IntegrationEngineMonitoringBean)ctx.getInstance
()).getFeedback();
^
D:/usr/sap/XI3/DVEBMGS00/j2ee/cluster/server0/apps/sap.com/com.sap.xi.rwb/EJBContainer/temp/temp1127721952087/com/sap/aii/mdt/server/MessageMonitoringObjectImpl10.java:1432: cannot resolve symbol
symbol : method setMaxMessages (int)
location: class
com.sap.aii.mdt.server.integrationengine.IntegrationEngineMonitoringBean ((IntegrationEngineMonitoringBean)ctx.getInstance
()).setMaxMessages( arg1);
^
D:/usr/sap/XI3/DVEBMGS00/j2ee/cluster/server0/apps/sap.com/com.sap.xi.rwb/EJBContainer/temp/temp1127721952087/com/sap/aii/mdt/server/IntegrationEngineHomeImpl10.java:11:
com.sap.aii.mdt.server.IntegrationEngineHomeImpl10 is not abstract and
does not override abstract method create() in
com.sap.aii.mdt.server.MessageMonitoringHome
public class IntegrationEngineHomeImpl10 extends
com.sap.engine.services.ejb.session.EJBHomeImpl implements
IntegrationEngineHome {
^
D:/usr/sap/XI3/DVEBMGS00/j2ee/cluster/server0/apps/sap.com/com.sap.xi.rwb/EJBContainer/temp/temp1127721952087/com/sap/aii/mdt/server/MessageMonitoringObjectImpl11.java:13:
com.sap.aii.mdt.server.MessageMonitoringObjectImpl11 is not abstract
and does not override abstract method getLoggingAttributes
(java.lang.String) in com.sap.aii.mdt.server.MessageMonitoring
public class MessageMonitoringObjectImpl11 extends
com.sap.engine.services.ejb.session.stateful.StatefulEJBObjectImplFP
implements MessageMonitoring {
^
D:/usr/sap/XI3/DVEBMGS00/j2ee/cluster/server0/apps/sap.com/com.sap.xi.rwb/EJBContainer/temp/temp1127721952087/com/sap/aii/mdt/server/MessageMonitoringObjectImpl11.java:1112: setRwb(boolean) in
com.sap.aii.mdt.server.MessageMonitoringObjectImpl11 cannot implement
setRwb(boolean) in com.sap.aii.mdt.server.MessageMonitoring; overridden
method does not throw
com.sap.aii.mdt.api.exceptions.OperationFailedException
public void setRwb(boolean arg1) throws java.rmi.RemoteException
^
D:/usr/sap/XI3/DVEBMGS00/j2ee/cluster/server0/apps/sap.com/com.sap.xi.rwb/EJBContainer/temp/temp1127721952087/com/sap/aii/mdt/server/MessageMonitoringObjectImpl11.java:412: setDomain(java.lang.String) in
com.sap.aii.mdt.server.MessageMonitoringObjectImpl11 cannot implement
setDomain(java.lang.String) in
com.sap.aii.mdt.server.MessageMonitoring; overridden method does not
throw com.sap.aii.mdt.api.exceptions.OperationFailedException
public void setDomain(java.lang.String arg1) throws
java.rmi.RemoteException
^
D:/usr/sap/XI3/DVEBMGS00/j2ee/cluster/server0/apps/sap.com/com.sap.xi.rwb/EJBContainer/temp/temp1127721952087/com/sap/aii/mdt/server/MessageMonitoringObjectImpl11.java:740: getMessageData(java.lang.String) in
com.sap.aii.mdt.server.MessageMonitoringBean cannot be applied to
(java.lang.String,boolean)
result = ((IntegrationServerMonitoringBean)ctx.getInstance
()).getMessageData( arg1, arg2);
^
D:/usr/sap/XI3/DVEBMGS00/j2ee/cluster/server0/apps/sap.com/com.sap.xi.rwb/EJBContainer/temp/temp1127721952087/com/sap/aii/mdt/server/MessageMonitoringObjectImpl11.java:786: cannot resolve symbol
symbol : method getMessageList ()
location: class
com.sap.aii.mdt.server.integrationserver.IntegrationServerMonitoringBean result = ((IntegrationServerMonitoringBean)ctx.getInstance
()).getMessageList();
^
D:/usr/sap/XI3/DVEBMGS00/j2ee/cluster/server0/apps/sap.com/com.sap.xi.rwb/EJBContainer/temp/temp1127721952087/com/sap/aii/mdt/server/MessageMonitoringObjectImpl11.java:1092: getLoggingAttributes(java.lang.String) in
com.sap.aii.mdt.server.MessageMonitoringBean cannot be applied to
(java.lang.String,boolean)
result = ((IntegrationServerMonitoringBean)ctx.getInstance
()).getLoggingAttributes( arg1, arg2);
^
D:/usr/sap/XI3/DVEBMGS00/j2ee/cluster/server0/apps/sap.com/com.sap.xi.rwb/EJBContainer/temp/temp1127721952087/com/sap/aii/mdt/server/MessageMonitoringObjectImpl11.java:1217: cannot resolve symbol
symbol : method hasVersions ()
location: class
com.sap.aii.mdt.server.integrationserver.IntegrationServerMonitoringBean result = ((IntegrationServerMonitoringBean)ctx.getInstance
()).hasVersions();
^
D:/usr/sap/XI3/DVEBMGS00/j2ee/cluster/server0/apps/sap.com/com.sap.xi.rwb/EJBContainer/temp/temp1127721952087/com/sap/aii/mdt/server/MessageMonitoringObjectImpl11.java:1305: cannot resolve symbol
symbol : method getPureMessageList ()
location: class
com.sap.aii.mdt.server.integrationserver.IntegrationServerMonitoringBean result = ((IntegrationServerMonitoringBean)ctx.getInstance
()).getPureMessageList();
^
D:/usr/sap/XI3/DVEBMGS00/j2ee/cluster/server0/apps/sap.com/com.sap.xi.rwb/EJBContainer/temp/temp1127721952087/com/sap/aii/mdt/server/MessageMonitoringObjectImpl11.java:1392: cannot resolve symbol
symbol : method getFeedback ()
location: class
com.sap.aii.mdt.server.integrationserver.IntegrationServerMonitoringBean result = ((IntegrationServerMonitoringBean)ctx.getInstance
()).getFeedback();
^
D:/usr/sap/XI3/DVEBMGS00/j2ee/cluster/server0/apps/sap.com/com.sap.xi.rwb/EJBContainer/temp/temp1127721952087/com/sap/aii/mdt/server/MessageMonitoringObjectImpl11.java:1432: cannot resolve symbol
symbol : method setMaxMessages (int)
location: class
com.sap.aii.mdt.server.integrationserver.IntegrationServerMonitoringBean ((IntegrationServerMonitoringBean)ctx.getInstance
()).setMaxMessages( arg1);
^
D:/usr/sap/XI3/DVEBMGS00/j2ee/cluster/server0/apps/sap.com/com.sap.xi.rwb/EJBContainer/temp/temp1127721952087/com/sap/aii/mdt/server/IntegrationServerHomeImpl10.java:11:
com.sap.aii.mdt.server.IntegrationServerHomeImpl10 is not abstract and
does not override abstract method create() in
com.sap.aii.mdt.server.MessageMonitoringHome
public class IntegrationServerHomeImpl10 extends
com.sap.engine.services.ejb.session.EJBHomeImpl implements
IntegrationServerHome {
^
24 errors
(message ID:
com.sap.sdm.serverext.servertype.inqmy.extern.EngineApplOnlineDeployerImpl.performAction(DeploymentActionTypes).REMEXC)
Deployment of com.sap.xi.rwb finished with Error (Duration 12172 ms)
Can you help me??
Thanks
Regards
Stefan -
Please Help PI Data Dependent Integration Builder Authorizations NOT Workng
Dear Friends / Experts,
I had spend many days and explored all Weblog and links on this website and implemented all the steps required to acheive Data Dependent Integration Builder Security and I am not successful so far. I am just giving up now - Please Help Me ---
As I said, I already read all the important Forum Links and SAP Web links and Followed Each and Every Step - service.sap.com/instguidesNW04 ® Installation ® SAP XI
Security Requirement - Data Dependent/Object Level Authorizations in XI / PI
In distributed teams or in a shared PI environment it might be necessary to limit authorization for a developer or a group of developers to only one Software Component or objects within a Software Component or to specific Configuration Objects.
Our Environment - PI 7.0 SP 16
Created a new role in the Integration Builder Design
u2013Add Object Types of any Software Component and Namespace
- Enable usage of Integration Builder roles in Exchange Profile
Integration Builder u2013Integration Builder RepositoryParameter com.sap.aii.util.server.auth.activation to true
Assign users to the newly created Integration Builder roles
u2013Create dummy roles in Web AS ABAP, these roles are then available as groups in Web AS Java
u2013Assign users to these roles
u2013Assign the Integration Builder roles to the above groups in Web AS Java
u2013Assign unrestricted roles to Super Users
Please help - How to validate whether Data Dependent Authorizations are Activated?
I am working with XI Developers and Basis Team and we did updated all the Required Exchange profile parameters.
Per this Document - User Authorizations in Integration Builder Tools - Do we need to update the server.lockauth.activation in Exchange Profile. When We updated, It removed Edit Access from all XI Developers in PI
In both the Integration Repository and the Integration Directory, you can define more detailed authorizations that restrict access to design and configuration objects.
In both tools, you define such authorizations by choosing Tools ® User Roles from the menu bar. The authorization for this menu option is provided by role SAP_XI_ADMINISTRATOR_J2EE. Of course, this role should only be granted to a very restricted number of administrators. To activate these more detailed authorizations, you must set exchange profile parameter com.sap.aii.ib.server.lockauth.activation to true.
The access authorizations themselves can be defined at the object-type level only (possibly restricted by a selection path), where you can specify each access action either individually as Create, Modify, or Delete for each object type, or as an overall access granting all three access actions.
http://help.sap.com/saphelp_nw04/helpdata/en/f7/c2953fc405330ee10000000a114084/frameset.htm
I was able to control display and maintain access from ABAP Roles, but completely failed to implement Integration Builder Security?
Are there any ways to check Whether Data Dependent authorization or J2EE Authorizations are activated?
Thanks a lot
SatishHello,
so to give you status of our issue.
We were able to export missing business component .
But we also exported some interfaces after that and we had some return code 8, due to objects still present in change list on quality system (seems after previous failed transports , the change list was not cleared completley...).
So now we have checked that no objects is present in the change list of quality system and we plan to export again our devs on quality system.
Hope after that no more return code 8 during imports and all devs transported correctly on quality system.
Also recommending to read that, which is pretty good.
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/7078566c-72e0-2e10-2b8a-e10fcf8e1a3d?overridelayout=t…
Thanks all,
S.N -
Browser (integration builder ) is not getting opened in tcode SXMB_IFR
hi
i am working on SAP XI 7.0 sp12 . recently we are facing one problem like when we hit tcode SXMB_IFR , the message shows : "start of application: start integration builder " but it does not starts browser(integration builder ) .. did any body face this problem.. please help
akhilHi,
I think one or more of below mentioned services are not up and running.
1. Start the Visual Administrator of the J2EE engine.
2. Choose Cluster u2192 Server u2192 Services u2192 Deploy
3. In the right frame, select the radio button Application.
A list of the deployed services appears.
4. Check if the following services are running
u2022 All services beginning with
u2212 sap.com/com.sap.aii*
u2212 sap.com/com.sap.lcr*
u2212 sap.com/com.sap.xi*
u2022 sap.com/com.sap.rprof.remoteProfile
If one of the services is not running, select the services and choose Start Application.
After doing the above steps try again, you should be able to see the IB.
Regards,
Sarvesh -
Integration builder can not start up after sp9 to sp15 upgrade
ID cann't start up, but IR can.
java web start error is :
can;t download http://sp001:50000/dir/directory/iaik_jsse.jar
I have tried re-Initialization but not work.hi
ref this
Java Web Start
https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/1688 [original link is broken] [original link is broken] [original link is broken]
Unable to open IR/ESR/ID ? (XI/PI/PI 7.1) [Updated for PI 7.1 support]
XI Integration Builder run on top of Javau2122 Web Start 1.4.2, which is part of J2SE 1.4.2.
You need to download Javau2122 WebStart 1.4.2
Troubleshooting:
Probably Javau2122 WebStart does not detect the correct Proxy Settings .
This could be set to None or to specific for values HTTP Proxy and HTTP Port .
Contact your network administrator for the correct settings.
To change the Proxy Settings:
Select Windows Start menu -> All Programs -> Java Web Start -> Java Web Start
Choose File -> Preferences -> General
Choose None to switch off the proxy settings or Manual to set the HTTP Proxy and HTTP Port.
ChooseOK
Close Javau2122 Webstart -
New Build Address not recognised
I am trying to transfer my bt phobe line to my new address, it is registered with royal mail, but when I ring customer services they say that the address is not showing up on the system,
How do I add my address to the BT/Openreach database?Hi Ahmeddeshmukh,
Welcome to the forum and thanks for posting. I've got your email and I'll get back to you this evening.
Cheers
David
BTCare Community Mod
If we have asked you to email us with your details, please make sure you are logged in to the forum, otherwise you will not be able to see our ‘Contact Us’ link within our profiles.
We are sorry but we are unable to deal with service/account queries via the private message(PM) function so please don't PM your account info, we need to deal with this via our email account :-) -
Help - How to invoke Integration Builder
Hello Gurus,
It's a great forum to know more about XI, scenarios, blogs etc. I have a very simple question as a basic for all the scenarios -
How to invoke / start integration builder and integration repository. I am getting message "Integration Builder address not maintained" while running the SXMB_IFR.
Any comments, pointers will be great.
regards,
SmHi Sri,
1) Were you able to open in exchange profile?
To findout, try the following URL
http://<hostname>:<port>/exchangeProfile
2) Make sure to check connection parameters in Exchange Profile and the following values are set
com.sap.aii.connect.repository.name
com.sap.aii.connect.repository.httpport
3)Make sure your J2EE server is running. You can find out by going to the URL http://hostname:50000.
Also complete all your post installation activities.
Also go through these links which will surely help you.....
https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/1688 [original link is broken] [original link is broken] [original link is broken] [original link is broken] [original link is broken]
/people/shabarish.vijayakumar/blog/2006/02/13/unable-to-open-iresrid-xipipi-71-updated-for-pi-71-support
Integration Builder Address not maintained
Regards,
Abhy -
SPROXY: No connection to Integration Builder (only local data visible)
¡Hola!
When I try to access the transaction SPROXY I get the message "No connection to Integration Builder (only local data visible)".
I already did the configuration steps described in the XI Configuration Guide, section 8: Connecting Business Systems with an Integration Engine to the Central Integration Server. I also checked that the parameters in the Exchange Profile were correct.
Transaction SLDCHECK is working ok. The TCP/IP connections SAPSLDAPI & LCRSAPRFC work OK when I do Test Connection.
In transaction SPROXY, when I do Connection Test the first 2 steps work fine, but I get an error on the last two:
1. The address of the Integration Builder must be stored in the R/3
System
=>Check/maintain with report SPROX_CHECK_IFR_ADDRESS
Result: OK: Address maintained
2. The HTTP connection of the R/3 application server must function
correctly
=>Check with report SPROX_CHECK_HTTP_COMMUNICATION
Result: HTTP communication functioning
The following 2 steps return an error:
3. The Integration Builder server must be running correctly
=>Check with report SPROX_CHECK_IFR_RESPONSE
Result: Integration Builder data not understood
4. Proxy generation must correctly interpret the data of the
Integration Builder
==>Check with report SPROX_CHECK_IFR_CONNECTION
Result: Integration Builder data not understood
I've been looking in the forums and weblogs but haven't been able to figure out what could be wrong with my system. Can someone please help?
Thanks and Regards,
CarlosCarlos,
Check Global Configuration data in R3 using TC : SXMB_ADM.
You need to set values..Role of Business System : Application System and Corresponding Integration server details.
Also check your HTTP RFC connection : INTEGRATION_DIRECTORY_HMI
Nilesh
Message was edited by:
Nilesh Kshirsagar -
Error while setting up the configuration for XI integration builder
Hi experts,
I am trying to configure the XI integration builder.
I have created an entry in table SPROXSET and created an RFC destination of type G.
After that I am trying to execute the SPROXY, I am getting an error "IFR_HTTP_DEST must not be set in table SPROXSET;"
( IFR_HTTP_DEST is the entry in the table SPROXSET)
Please give me solution to this error....This is very urgent.....
Thanks,
Madhuri.I am having the same problem:
detail:
I have set the echange parameters
com.sap.aii.server.contextRoot.repository.services=rep
com.sap.aii.server.httpport.repository=50000
com.sap.aii.server.name.repository=xiserver
TA: SLDAPICUST hostname=xiserver
=>Check/maintain with report SPROX_CHECK_IFR_ADDRESS
returns
im exchange profilealdxi01:50000/rep
=>Check with report SPROX_CHECK_IFR_RESPONSE
givers: Integration Builder data not un
se38 shows a wrong url when debuging
http://xiserver:50000/rep/ifraccess?service=query&type=namespace
any suggesting
sproxy only shows the local entries and not the XI interfaces -
No Connection to Integration Builder (only local data visible): from R/3
Hi,
I am also facing the same problem. I maintained the RFC destinations in R/3 properly. I did Test Connection and for RFC destination its working fine. I maintained proper values in SLDAPICUST. When I run SLDCHECK I got the following error.
<b>Calling function LCR_LIST_BUSINESS_SYSTEMS
Retrieving data from the SLD server...
Function call returned exception code 4
=> Check whether the SLD is running!
Summary: Connection to SLD does not work
=> Check SLD function and configurations</b>
Otherwise access to XI Profile works fine. But then when I run SPROXY I am getting the same message <b>No Connection to Integration Builder (only local data visible)</b>
I also checked the following report =>Check with report SPROX_CHECK_IFR_RESPONSE (3rd option) its giving informational message <b>Integration Builder data not understood</b>, for the 4th report ==>Check with report SPROX_CHECK_IFR_CONNECTION, it is also showing the same above information message.
Looking forward for the response,
Appreciate your help,
Thanks and Regards,
JagadishHi,
I had the same problem and I have already solved it.
You have just to apply the following sap notes :
1232805 - Saint: Queue calculation for an add-on with CRT´s fail.
769120 - Support Package for APPINT 200_620
The first one is to update tha SPAM/SAINT to v 30 and the second one allow you use the pi/xi objects on application system.
There is another sap note 689847, but you just apply this if the sap notes above described did not work.
Paulo Correa
Maybe you are looking for
-
Print to a Laserjet 4050 networked on an XP machine from my iPad
How can I print to a Laserjet 4050 networked on an XP machine from my iPad? Can I use the AIO app? does not find the printer. Thanks.
-
Using a Samsung SyncMaster T220 1680X1050 resolution monitor
Whenever I try using the above external monitor at the listed native resolution, my Macbook displays it for a split second before becoming a black screen. All of the lower resolutions listed in the Display PreferencePane work, but it's blurry and not
-
Mac Pro 5,1 mid 2010 motherboard memory module pins damaged
Hi everyone, This morning, after another computer crash I've decided to get rid of the dust inside of the tower. When I put back the bottom, memory bodule I've noticed that it wasn't going in very smoothly - to realise that I've damanged some pins co
-
Greetings, I have a cascading parameter extracted from a query. After assignment (in data filtering option) to the fields the parameter splits into parameter-field1 and parameter-field2. Parameter-field1 is a combo box and parameter-field2 is pa
-
Xmod: Line-out too much near usb p
Sorry for my english, I'm italian... I can't connect my belkin pure AV cable to Xmod because the space between usb and line out is too small, i think this is a serious planning problem because many good quality cable present a connector more larger t