Integration Builder connection fails
Hi guys,
I have the following problem for 4-5 days now: When I open IR or ID, it takes too much time to open and edit objects inside them (such as mappings, communication channels etc). It seems to me that the connection is too loose. And even sometimes the connection is suddenly terminated and a small pop-up window appears that asks me to re-logon. Any ideas??
Evaggelos
Hi Ram,
>>>>Reinstall or restart J2ee server.
I dont think Reinstall is the best idea ?
restart would be a gud idea..
If you face the same problem after restart you can raise a support message.
https://service.sap.com/message
Regards,
Sumit
Similar Messages
-
How to configure the Integration Builder connection Parameters
Hi,
If I leave the integration builder for a while, then I explore objects, the pop up message is:
"Connection to server lost You can log on again once the server is available again Do you want to log on again?"
I input password, some times regain the connection, most time not, then if not, I have to restart integration builder. I would like to know where I can adjust parameters to allow connection kept longer.
Thanks
LiangHi, Swarup:
Thanks for your reply.
The reality here is that we could not get solid support from BSAIS team, we came to many situations that we have to search around and tell them how to do the job like this (They are all afraid of Java Stack
I will keep search, if you have detailed information how to and where to configure those parameters, please let me know.
Regards!
Liang -
Integration builder connection failure
Hi All,
when i run the transaction sldcheck , i get the error message connection failed.
can somebody tell me the required parameters that i should give in sm59.
Thanks.
Regards.
Disney.Hi Disney,
Where exactly you are trying to run SLDCHECK ? in XI system or in the applcation systems(business systems) for proxy connection ?
Check...
https://websmp205.sap-ag.de/instguides -> SAP Netweaver -> Release 04-> Installation -> SAP XI-> 'Configuration Guide - SAP XI 3.0' for configuring XI.
Check the sections 4.4 and 8.3 for more information..
Regards
Anand -
Integrated framework Connect failed
Dear all experts,
I have installed integrated framework for SBO
I have encountered the below error message:
XCE001 Nested exception: java.rmi.RemoteException: com.sap.b1i.xcellerator.XcelleratorException: XCE001 Nested exception: java.rmi.ConnectException: Connection refused to host: JCHONG-NB; nested exception is:
java.net.ConnectException: Connection refused: connect
when i 'test connection' in Integrated framework
Any ideas what i am missing out here?
Any ideas welcome....
:P
Thanks all
joannahi Rahul,
thanks for the prompt reply, but i have the following error when access the link;
403 Access denied
You do not have the permissions to access this resource
Error is logged with Tag:
Tue Nov 29 06:28:55 2011
Any way u can provide more info?
Thanks in advance
joanna -
Integration Builder Connect Problem
Hi
I'm working on an installation of XI3.0. When trying to connect to IB Repository or Directory it gives the following problem.
#431 21:22:01 [AWT-EventQueue-1] ERROR com.sap.aii.util.swing.toolkit.ExceptionDialog: Throwable
Thrown:
MESSAGE ID: com.sap.aii.ib.core.ejbutil.rb_all.SERVER_NOT_AVAILABLE
com.sap.aii.ib.core.login.ServerAccessException: Unable to connect to server iga51067:50000. Check server availability
at com.sap.aii.ib.core.ejbutil.EJBHomeFactory.initRemoteFactory(EJBHomeFactory.java:163)
at com.sap.aii.ib.clsif.login.LoginServiceProvider$LoginServiceImpl.login(LoginServiceProvider.java:159)
at com.sap.aii.ib.gui.login.SplashLogin.doLogin(SplashLogin.java:155)
at com.sap.aii.ib.gui.login.SplashLoginFrame$7.run(SplashLoginFrame.java:264)
at java.awt.event.InvocationEvent.dispatch(InvocationEvent.java:171)
at java.awt.EventQueue.dispatchEvent(EventQueue.java:448)
at java.awt.EventDispatchThread.pumpOneEventForHierarchy(EventDispatchThread.java:197)
at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:150)
at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:144)
at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:136)
at java.awt.EventDispatchThread.run(EventDispatchThread.java:99)
Serialized server exceptions:
MESSAGE ID: javax.naming.NoInitialContextException (serialized)
javax.naming.NoInitialContextException: Cannot instantiate class: com.sap.engine.services.jndi.InitialContextFactoryImpl
at java.net.URLClassLoader$1.run(URLClassLoader.java:198)
at java.security.AccessController.doPrivileged(Native Method)
at java.net.URLClassLoader.findClass(URLClassLoader.java:186)
at java.lang.ClassLoader.loadClass(ClassLoader.java:299)
at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:265)
at java.lang.ClassLoader.loadClass(ClassLoader.java:255)
at java.lang.ClassLoader.loadClassInternal(ClassLoader.java:315)
at java.lang.Class.forName0(Native Method)
at java.lang.Class.forName(Class.java:217)
Initially, it said 'cannot connect to server xxxxx:50004'.I followed up the threads to find that the port is 50000 and not 50004 and so changed it 50000. But I still get the same error (as shown above).
In the complete log, it also says at some point the following:
Root exception is java.lang.ClassNotFoundException: com.sap.engine.services.jndi.InitialContextFactoryImpl
I changed this port for 'directory.rmiport' and 'repository.rmiport' from 50004 to 50000.
All other ports in the profile are 50000.
Please also let me know which entry should have which port!!
What am i missing?
Appreciate any help regarding this. I seem to be stuck!
Thanks,
Rajit
Message was edited by: Rajit SrinivasHi Rajit,
I have got the same problem recently and solved it the following way:
Go to SAPJ2ee engine --> instance no. --> tools --> configtool.
A screen pops up.In the left panel select the Dispatcher, drill down to Services and select P4.
Now in the right panel u will find binding host. Enter the value for the binding host as follows.
If u r using single NIC.
<ur IP address>:localhost:127.0.0.1:<servername>
for multiple NICs enter the value as follows
<IP address1>:<IP address2>: localhost:127.0.0.1:<servername>:<servername>
Now try connecting to IntDir or IntRep..
It should work now. Please let me know if you need any more information.
Regards, -
SPROXY - No connection to the Integration Builder
Hi,
While generating a ABAP Proxy the communication between R/3 system and XI 3.0 repository did not work; transaction SPROXY displayed the following error message, 'No connection to the Integration Builder, only local data is visible'.
Can someone please help me out.
Regards,
JigishaHi,
I had the same problem and I have solved it.
You have just to apply the following sap notes :
1232805 - Saint: Queue calculation for an add-on with CRT´s fail.
769120 - Support Package for APPINT 200_620
The first one is to update tha SPAM/SAINT to v 30 and the second one allow you use the pi/xi objects on application system.
There is another sap note 689847, but you just apply this if the sap notes above described did not work.
Paulo Correa -
No Connection to Integration Builder (only local data visible): from R/3
Hi,
I am also facing the same problem. I maintained the RFC destinations in R/3 properly. I did Test Connection and for RFC destination its working fine. I maintained proper values in SLDAPICUST. When I run SLDCHECK I got the following error.
<b>Calling function LCR_LIST_BUSINESS_SYSTEMS
Retrieving data from the SLD server...
Function call returned exception code 4
=> Check whether the SLD is running!
Summary: Connection to SLD does not work
=> Check SLD function and configurations</b>
Otherwise access to XI Profile works fine. But then when I run SPROXY I am getting the same message <b>No Connection to Integration Builder (only local data visible)</b>
I also checked the following report =>Check with report SPROX_CHECK_IFR_RESPONSE (3rd option) its giving informational message <b>Integration Builder data not understood</b>, for the 4th report ==>Check with report SPROX_CHECK_IFR_CONNECTION, it is also showing the same above information message.
Looking forward for the response,
Appreciate your help,
Thanks and Regards,
JagadishHi,
I had the same problem and I have already solved it.
You have just to apply the following sap notes :
1232805 - Saint: Queue calculation for an add-on with CRT´s fail.
769120 - Support Package for APPINT 200_620
The first one is to update tha SPAM/SAINT to v 30 and the second one allow you use the pi/xi objects on application system.
There is another sap note 689847, but you just apply this if the sap notes above described did not work.
Paulo Correa -
BPEL server connection failed in Integration Server connect
I am creating an 'Integration server' in the JDeveloper.
After furnishing the details (App server name, Host, Port) on testing the connection it gets failed for BPEL process manager server:
Application Server: OK
BPEL Process Manager Server: FAILED
ESB Server: OK
The BPEL identity service failed to start because of the error: java.io.FileNotFoundException:http://hostname:8888/integration/services/testconnection/BPELConnection
Any ideas?
thanks in advance.
BinHi Françoise,
I think Application Server Test uses OPMN Port and for testing BPEL and ESB HTTP port is used.
Do you use default 8888 HTTP Port Number? When you create a Integration Server Connection it is default value, but maybe you have installed Oracle Application Server on another http port.
Regards,
J -
No Connection to Integration Builder
I have connected one our SAP Systems to our XI system in the XI technical and business landscape.
Whats weird is that when I log into the system that is connected and try to run the transaction sproxy, I get a message saying that there is no connection to the integration builder.
I do now know how to proceed.
Thoughts anyone?Hello
I have a similar problem. I am trying to configure my Application System (not XI) so that SPROXY works.
My systems are:
- Application System asystem -> host = ahost, port = aport
- Integration System isystem-> host = ihost, port = iport
At first I opened http://<ahost>:<iport>/exchangeProfile. Because I received errors I went to "Connections" (http://<ahost>:<aport>/exchangeProfile/connection.jsp) and entered the connection parameter for my isystem.
Afterwards my Exchange Profile was filled with the entries of my isystem. This means:
com.sap.aii.connect.repository.name = ihost
com.sap.aii.connect.repository.httpport = iport
com.sap.aii.connect.repository.contextRoot = rep
com.sap.aii.connect.integrationbuilder.startpage.url = rep/start/index.jsp
Is this correct?
Any help is appreciated
Best regards
Markus -
We are unable to connect to Integration builder through VPN.
Hi,
We are unable to connect to Integration builder through VPN.
Below are the errors we get:
a. In two of the PI 7.0 Systems we get:
i. Cannot open connection on host x and port y.
ii.com.sap.engine.services.rmi_p4.P4IOException: Cannot open connection on host: x and port:y
iii. java.net.SocketException: Malformed reply from SOCKS server
b. In the other two PI 7.1 systems we get:
i. MESSAGE ID: com.sap.aii.ib.core.ejbutil.rb_all.SERVER_NOT_AVAILABLE
ii. com.sap.engine.services.jndi.persistent.exceptions.NamingException: Exception while trying to get InitialContext. [Root exception is com.sap.engine.interfaces.cross.DestinationException: cannot establish connection with any of the available instances:
uvw.xyz.abc.net:51504 Reason: com.sap.engine.services.rmi_p4.P4IOException: Cannot open connection to host: x and port:y]
iii. com.sap.engine.interfaces.cross.DestinationException: cannot establish connection with any of the available instances:
uvw.xyz.abc.net:51504 Reason: com.sap.engine.services.rmi_p4.P4IOException: Cannot open connection to host: x and port: y
The hosts and ports are accessible. (Telnets and tracerts work fine for all the systems)
We are able to access the SLD and Runtime workbench on all the environments. However, Integration Builder tools are not accessible.
Any clue on what the problem might be?
Thank you,
Siva.Hi Siva,
When you execute SXMB_IFR from PI, do you get Integration Builder page?
Are you trying to directly access the PI server by the known URLs?
Also, Following links may be of your use:
Integration Builder -Configuration is not openning?
Re: unable to logon to Enterprise Services Builder or Integration Builder
Regards,
Nipun -
XI Configuration: Integration Builder..Cannot connect to repository
Dear All,
I am facing a strange problem in our XI7 server SP11. When I click on the Tools-->Configuration Wizard in Integration Builder I am getting a error message "Cannot connect to repository "
"com.sap.aii.utilxi.misc.api.BaseRuntimeException: Cannot connect to Repository"
Please let me know the cause of the error. I have checked the configurations in Exchange Profile and its fine.
Please advice what should be done to correct the error.
Warm regards
MazdulDear Jai,
One of the blog tells about the front end configurations..but this is not applicable in our case as evryone is facing the same issue.
The other blog mentions about the rfc connections and they are working fine.
Can you advice further ??
Mazdul -
SPROXY: No connection to Integration Builder (only local data visible)
¡Hola!
When I try to access the transaction SPROXY I get the message "No connection to Integration Builder (only local data visible)".
I already did the configuration steps described in the XI Configuration Guide, section 8: Connecting Business Systems with an Integration Engine to the Central Integration Server. I also checked that the parameters in the Exchange Profile were correct.
Transaction SLDCHECK is working ok. The TCP/IP connections SAPSLDAPI & LCRSAPRFC work OK when I do Test Connection.
In transaction SPROXY, when I do Connection Test the first 2 steps work fine, but I get an error on the last two:
1. The address of the Integration Builder must be stored in the R/3
System
=>Check/maintain with report SPROX_CHECK_IFR_ADDRESS
Result: OK: Address maintained
2. The HTTP connection of the R/3 application server must function
correctly
=>Check with report SPROX_CHECK_HTTP_COMMUNICATION
Result: HTTP communication functioning
The following 2 steps return an error:
3. The Integration Builder server must be running correctly
=>Check with report SPROX_CHECK_IFR_RESPONSE
Result: Integration Builder data not understood
4. Proxy generation must correctly interpret the data of the
Integration Builder
==>Check with report SPROX_CHECK_IFR_CONNECTION
Result: Integration Builder data not understood
I've been looking in the forums and weblogs but haven't been able to figure out what could be wrong with my system. Can someone please help?
Thanks and Regards,
CarlosCarlos,
Check Global Configuration data in R3 using TC : SXMB_ADM.
You need to set values..Role of Business System : Application System and Corresponding Integration server details.
Also check your HTTP RFC connection : INTEGRATION_DIRECTORY_HMI
Nilesh
Message was edited by:
Nilesh Kshirsagar -
No connection to the Integration Builder while using ABAP Proxies
Hi All,
Here am getting an error when i say SPROXY in R3 system.
No connection to the Integration Builder while using ABAP Proxies.
For this i have gone through the blog no 3022.
and i did all the connection.And then i have gone through the steps
Go to---->test connection steps.I added the address called com.sap.aii.server.name.repository in SPROXSET table.
and i run the Tcode SPROXY.Now am getting into DUMP when is say SPROXY.
And also i run a program called SPROX_CHECK_IFR_ADDRESS to add the address
but i didn't found the path for Excahnge Profile it was disable.
and later i run a program SPROX_CHECK_IFR_CONNECTION
now it went into DUMP.
Can Anyone suggest me how to fix this error.
Thanks,
Kalyan.hi kalyan
1)check whether your R/3 system is based on WEBAS 640 or WEBAS620 (if it is on WEBAS 620 you need to install xi ADD ON,if on WEBAS 640 no need)
2)check the report SPROX_CHECK_IFR_ADDRESS
The address is taken the from following parameters in the exchange profile (section 'connections'):
http://server:port/exchangeProfile --> Connection
com.sap.aii.connect.repository.name: Server (e.g. pwdf0436)
com.sap.aii.connect.repository.httpport: Port (e.g. 1080)
com.sap.aii.connect.repository.contextroot: Root (e.g. rep)
Furthermore, the logon data is also read from the exchange profile(section 'ApplicationSystem'):
com.sap.aii.applicationsystem.serviceuser.name: User
com.sap.aii.applicationsystem.serviceuser.pwd: Password
rgrds
kummari -
SPROXY No connection to Integration Builder SLDCHECK working okay
Hi,
In R/3, when I run SPROXY transaction, I get "No connection to Integration Builder ".
I have gone thru blog
[How do you activate ABAP Proxies? |How do you activate ABAP Proxies?]- Activate Proxy.
I have done all the config in R/3 and sldcheck is working fine.
I have also edited "Integration Engine Configuration".
I have added 2 entries in Specific Configuration.
RUNTIME ENGINE_TYPE LOC
RUNTIME IS_URL http://xidpro100:8000/sap/xi/engine?type=entry
But still getting this error.
Regards,
Anirudh.Hi,
check, have you maintain values in sldapicust.
and check the host file entries in os level.
check the rfc is working properly INTEGRATION_DIRECTORY_HMI
In integration engine configuration role of business system as Application sytem
and corresponding integ server as dest://SAPISU_XID
check this values are there
then get back we will resolve this issue..
Regards
Vijay
Edited by: vijay Kumar on Sep 20, 2008 8:28 AM -
SPROXY:No connection to integration builder
hi friends..
While i am trying to access the transaction <b>sproxy</b> in my receiver R/3 system i am getting message saying "<b>No connection to integration builder</b>(only local data visible)"..
I searched in xi forums also.. i couldn't find any solution for that.. Please anybody an help me .. to solve this problem... I am trying to solve last three hours.. Please help to solve this issue...
Thanks friends
kumarHi Kumar,
The same provlem was solved here
No connection to Integration Builder
To understand in detail have a look at this
https://websmp102.sap-ag.de/~sapidb/011000358700001697502004E.PDF
Topic: 8 Connecting Business Systems with an Integration Engine to the Central Integration Server
Regards,
Prateek
Maybe you are looking for
-
How can I disable a button ?
Hi! How can I disable the a button ? There is a if statement. If it returns a false the button must be disabled. Regards sas Edited by: erdem sas on Jan 15, 2008 3:06 PM Edited by: erdem sas on Jan 15, 2008 3:16 PM
-
I have problem like this with all websites lately.
problem loading sites with message like this: A script on this page may be busy, or it may have stopped responding. You can stop the script now, or you can continue to see if the script will complete. Script: http://www.careerbuilder.co.uk/A2EB891D63
-
Why Annyconecct is better than vpn client ?
why anyconnect is better than cisco vpn client ? what is its advangatges ? i think that both are remoteaccess vpn . why its better ?
-
Roaming profile problem?
I'm not sure it's a roaming profile problem or not, but I need help to fix it. we use MetaFrame citrix to connect a remote computer running a medical program. Every computer has Citrix online plug-in. If user uses computer user always use, everything
-
How can I attach any photos on lion to new emails in Outlook 2011
How can I attach any photos on lion to new emails in Outlook 2011. The problem is picure from file option is greyed out and I don't know why. You can do photo browser this just browses to photo and does not allow me to select it.