Integration builder connection failure

Hi All,
     when i run the transaction sldcheck , i get the error message connection failed.
     can somebody tell me the required parameters that i should give in sm59.
Thanks.
Regards.
Disney.

Hi Disney,
Where exactly you are trying to run SLDCHECK ? in XI system or in the applcation systems(business systems) for proxy connection ?
Check...
https://websmp205.sap-ag.de/instguides -> SAP Netweaver -> Release 04-> Installation -> SAP XI-> 'Configuration Guide - SAP XI 3.0'    for configuring XI.
Check the sections 4.4 and 8.3 for more information..
Regards
Anand

Similar Messages

  • How to configure the Integration Builder connection Parameters

    Hi,
    If I leave the integration builder for a while, then I explore objects, the pop up message is:
    "Connection to server lost You can log on again once the server is available again Do you want to log on again?"
    I input password, some times regain the connection, most time not, then if not, I have to restart integration builder. I would like to know where I can adjust parameters to allow connection kept longer.
    Thanks
    Liang

    Hi, Swarup:
    Thanks for your reply.
    The reality here is that we could not get solid support from BSAIS team, we came to many situations that we have to search around and tell them how to do the job like this (They are all afraid of Java Stack
    I will keep search, if you have detailed information how to and where to configure those parameters, please let me know.
    Regards!
    Liang

  • Integration Builder Connect Problem

    Hi
    I'm working on an installation of XI3.0. When trying to connect to IB Repository or Directory it gives the following problem.
    #431 21:22:01 [AWT-EventQueue-1] ERROR com.sap.aii.util.swing.toolkit.ExceptionDialog: Throwable
    Thrown:
    MESSAGE ID: com.sap.aii.ib.core.ejbutil.rb_all.SERVER_NOT_AVAILABLE
    com.sap.aii.ib.core.login.ServerAccessException: Unable to connect to server iga51067:50000. Check server availability
         at com.sap.aii.ib.core.ejbutil.EJBHomeFactory.initRemoteFactory(EJBHomeFactory.java:163)
         at com.sap.aii.ib.clsif.login.LoginServiceProvider$LoginServiceImpl.login(LoginServiceProvider.java:159)
         at com.sap.aii.ib.gui.login.SplashLogin.doLogin(SplashLogin.java:155)
         at com.sap.aii.ib.gui.login.SplashLoginFrame$7.run(SplashLoginFrame.java:264)
         at java.awt.event.InvocationEvent.dispatch(InvocationEvent.java:171)
         at java.awt.EventQueue.dispatchEvent(EventQueue.java:448)
         at java.awt.EventDispatchThread.pumpOneEventForHierarchy(EventDispatchThread.java:197)
         at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:150)
         at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:144)
         at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:136)
         at java.awt.EventDispatchThread.run(EventDispatchThread.java:99)
    Serialized server exceptions:
    MESSAGE ID: javax.naming.NoInitialContextException (serialized)
    javax.naming.NoInitialContextException: Cannot instantiate class: com.sap.engine.services.jndi.InitialContextFactoryImpl
         at java.net.URLClassLoader$1.run(URLClassLoader.java:198)
         at java.security.AccessController.doPrivileged(Native Method)
         at java.net.URLClassLoader.findClass(URLClassLoader.java:186)
         at java.lang.ClassLoader.loadClass(ClassLoader.java:299)
         at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:265)
         at java.lang.ClassLoader.loadClass(ClassLoader.java:255)
         at java.lang.ClassLoader.loadClassInternal(ClassLoader.java:315)
         at java.lang.Class.forName0(Native Method)
         at java.lang.Class.forName(Class.java:217)
    Initially, it said 'cannot connect to server xxxxx:50004'.I followed up the threads to find that the port is 50000 and not 50004 and so changed it 50000. But I still get the same error (as shown above).
    In the complete log, it also says at some point the following:
    Root exception is java.lang.ClassNotFoundException: com.sap.engine.services.jndi.InitialContextFactoryImpl
    I changed this port for 'directory.rmiport' and 'repository.rmiport' from 50004 to 50000.
    All other ports in the profile are 50000.
    Please also let me know which entry should have which port!!
    What am i missing?
    Appreciate any help regarding this. I seem to be stuck!
    Thanks,
    Rajit
    Message was edited by: Rajit Srinivas

    Hi Rajit,
    I have got the same problem recently and solved it the following way:
    Go to SAPJ2ee engine --> instance no. --> tools --> configtool.
    A screen pops up.In the left panel select the Dispatcher, drill down to Services and select P4.
    Now in the right panel u will find binding host. Enter the value for the binding host as follows.
    If u r using single NIC.
    <ur IP address>:localhost:127.0.0.1:<servername>
    for multiple NICs enter the value as follows
    <IP address1>:<IP address2>: localhost:127.0.0.1:<servername>:<servername>
    Now try connecting to IntDir or IntRep..
    It should work now. Please let me know if you need any more information.
    Regards,

  • Integration Builder connection fails

    Hi guys,
    I have the following problem for 4-5 days now: When I open IR or ID, it takes too much time to open and edit objects inside them (such as mappings, communication channels etc). It seems to me that the connection is too loose. And even sometimes the connection is suddenly terminated and a small pop-up window appears that asks me to re-logon. Any ideas??
    Evaggelos

    Hi Ram,
    >>>>Reinstall or restart J2ee server.
    I dont think Reinstall is the best idea ?
    restart would be a gud idea..
    If you face the same problem after restart you can raise a support message.
    https://service.sap.com/message
    Regards,
    Sumit

  • No Connection to Integration Builder

    I have connected one our SAP Systems to our XI system in the XI technical and business landscape.
    Whats weird is that when I log into the system that is connected and try to run the transaction sproxy, I get a message saying that there is no connection to the integration builder.
    I do now know how to proceed.
    Thoughts anyone?

    Hello
    I have a similar problem. I am trying to configure my Application System (not XI) so that SPROXY works.
    My systems are:
    - Application System asystem -> host = ahost, port = aport
    - Integration System isystem-> host = ihost, port = iport
    At first I opened http://<ahost>:<iport>/exchangeProfile. Because I received errors I went to "Connections" (http://<ahost>:<aport>/exchangeProfile/connection.jsp) and entered the connection parameter for my isystem.
    Afterwards my Exchange Profile was filled with the entries of my isystem. This means:
    com.sap.aii.connect.repository.name = ihost
    com.sap.aii.connect.repository.httpport = iport
    com.sap.aii.connect.repository.contextRoot = rep
    com.sap.aii.connect.integrationbuilder.startpage.url = rep/start/index.jsp
    Is this correct?
    Any help is appreciated
    Best regards
    Markus

  • We are unable to connect to Integration builder through VPN.

    Hi,
    We are unable to connect to Integration builder through VPN.
    Below are the errors we get:
    a. In two of the PI 7.0 Systems  we get:
         i. Cannot open connection on host x and port y.
         ii.com.sap.engine.services.rmi_p4.P4IOException: Cannot open connection on host: x and port:y
         iii. java.net.SocketException: Malformed reply from SOCKS server
    b. In the other two PI 7.1 systems we get:
         i. MESSAGE ID: com.sap.aii.ib.core.ejbutil.rb_all.SERVER_NOT_AVAILABLE
         ii. com.sap.engine.services.jndi.persistent.exceptions.NamingException: Exception while trying to get InitialContext. [Root exception is com.sap.engine.interfaces.cross.DestinationException: cannot establish connection with any of the available instances:
    uvw.xyz.abc.net:51504 Reason: com.sap.engine.services.rmi_p4.P4IOException: Cannot open connection to host: x and port:y]
         iii. com.sap.engine.interfaces.cross.DestinationException: cannot establish connection with any of the available instances:
    uvw.xyz.abc.net:51504 Reason: com.sap.engine.services.rmi_p4.P4IOException: Cannot open connection to host: x and port: y
    The hosts and ports are accessible. (Telnets and tracerts work fine for all the systems)
    We are able to access the SLD and Runtime workbench on all the environments. However, Integration Builder tools are not accessible.
    Any clue on what the problem might be?
    Thank you,
    Siva.

    Hi Siva,
    When you execute SXMB_IFR from PI, do you get  Integration Builder page?
    Are you trying to directly access the PI server by the known URLs?
    Also, Following links may be of your use:
    Integration Builder -Configuration is not openning?
    Re: unable to logon to Enterprise Services Builder or Integration Builder
    Regards,
    Nipun

  • XI Configuration: Integration Builder..Cannot connect to repository

    Dear All,
    I am facing a strange problem in our XI7 server SP11. When I click on the Tools-->Configuration Wizard in Integration Builder I am getting a error message "Cannot connect to repository "
    "com.sap.aii.utilxi.misc.api.BaseRuntimeException: Cannot connect to Repository"
    Please let me know the cause of the error. I have checked the configurations in Exchange Profile and its fine.
    Please advice what should be done to correct the error.
    Warm regards
    Mazdul

    Dear Jai,
    One of the blog tells about the front end configurations..but this is not applicable in our case as evryone is facing the same issue.
    The other blog mentions about the rfc connections and they are working fine.
    Can you advice further ??
    Mazdul

  • SPROXY: No connection to Integration Builder (only local data visible)

    ¡Hola!
    When I try to access the transaction SPROXY I get the message "No connection to Integration Builder (only local data visible)".
    I already did the configuration steps described in the XI Configuration Guide, section 8: Connecting Business Systems with an Integration Engine to the Central Integration Server.  I also checked that the parameters in the Exchange Profile were correct.
    Transaction SLDCHECK is working ok.  The TCP/IP connections SAPSLDAPI & LCRSAPRFC work OK when I do Test Connection.
    In transaction SPROXY, when I do Connection Test the first 2 steps work fine, but I get an error on the last two:
    1.  The address of the Integration Builder must be stored in the R/3
         System
         =>Check/maintain with report SPROX_CHECK_IFR_ADDRESS
    Result: OK: Address maintained
    2. The HTTP connection of the R/3 application server must function
    correctly
    =>Check with report SPROX_CHECK_HTTP_COMMUNICATION
    Result: HTTP communication functioning
    The following 2 steps return an error:
    3. The Integration Builder server must be running correctly
    =>Check with report SPROX_CHECK_IFR_RESPONSE
    Result: Integration Builder data not understood
    4. Proxy generation must correctly interpret the data of the
    Integration Builder
    ==>Check with report SPROX_CHECK_IFR_CONNECTION
    Result: Integration Builder data not understood
    I've been looking in the forums and weblogs but haven't been able to figure out what could be wrong with my system.   Can someone please help?
    Thanks and Regards,
    Carlos

    Carlos,
    Check Global Configuration data in R3  using TC : SXMB_ADM.
    You need to set values..Role of Business System : Application System and Corresponding Integration server details.
    Also check your HTTP RFC connection : INTEGRATION_DIRECTORY_HMI
    Nilesh
    Message was edited by:
            Nilesh Kshirsagar

  • SPROXY - No connection to the Integration Builder

    Hi,
    While generating a ABAP Proxy the communication between R/3 system and XI 3.0 repository did not work; transaction SPROXY displayed the following error message, 'No connection to the Integration Builder, only local data is visible'.
    Can someone please help me out.
    Regards,
    Jigisha

    Hi,
    I had the same problem and I have solved it.
    You have just to apply the following sap notes :
    1232805 - Saint: Queue calculation for an add-on with CRT´s fail.
    769120 - Support Package for APPINT 200_620
    The first one is to update tha SPAM/SAINT to v 30 and the second one allow you use the pi/xi objects on application system.
    There is another sap note 689847, but you just apply this if the sap notes above described did not work.
    Paulo Correa

  • No connection to the Integration Builder while using ABAP Proxies

    Hi All,
    Here am getting an error when i say SPROXY in R3 system.
       No connection to the Integration Builder while using ABAP Proxies.
    For this i have gone through the blog no 3022.
    and i did all the connection.And then i have gone through the steps
    Go to---->test connection steps.I added the address called com.sap.aii.server.name.repository in SPROXSET table.
    and i run the Tcode SPROXY.Now am getting into DUMP when is say SPROXY.
    And also i run a program called SPROX_CHECK_IFR_ADDRESS to add the address
    but i didn't found the path for Excahnge Profile it was disable.
    and later i run a program SPROX_CHECK_IFR_CONNECTION
    now it went into DUMP.
    Can Anyone suggest me how to fix this error.
    Thanks,
    Kalyan.

    hi kalyan
    1)check whether your R/3 system is based on WEBAS 640 or WEBAS620 (if it is on WEBAS 620 you need to install xi ADD ON,if on WEBAS 640 no need)
    2)check the report SPROX_CHECK_IFR_ADDRESS
    The address is taken the from following parameters in the exchange profile (section 'connections'):
    http://server:port/exchangeProfile --> Connection
    com.sap.aii.connect.repository.name: Server (e.g. pwdf0436)
    com.sap.aii.connect.repository.httpport: Port (e.g. 1080)
    com.sap.aii.connect.repository.contextroot: Root (e.g. rep)
    Furthermore, the logon data is also read from the exchange profile(section 'ApplicationSystem'):
    com.sap.aii.applicationsystem.serviceuser.name: User
    com.sap.aii.applicationsystem.serviceuser.pwd: Password
    rgrds
    kummari

  • SPROXY No connection to Integration Builder SLDCHECK working okay

    Hi,
    In R/3, when I run SPROXY transaction, I get "No connection to Integration Builder ".
    I have gone thru blog
    [How do you activate ABAP Proxies? |How do you activate ABAP Proxies?]- Activate Proxy.
    I have done all the config in R/3 and sldcheck is working fine.
    I have also edited "Integration Engine Configuration".
    I have added 2 entries in Specific Configuration.
    RUNTIME     ENGINE_TYPE     LOC
    RUNTIME     IS_URL                 http://xidpro100:8000/sap/xi/engine?type=entry
    But still getting this error.
    Regards,
    Anirudh.

    Hi,
    check, have you maintain values in sldapicust.
    and check the host file entries in os level.
    check the rfc is working properly  INTEGRATION_DIRECTORY_HMI
    In integration engine configuration  role of business system as Application sytem
    and corresponding integ server as dest://SAPISU_XID
    check this values are there
    then get back we will resolve this issue..
    Regards
    Vijay
    Edited by: vijay Kumar on Sep 20, 2008 8:28 AM

  • SPROXY:No connection to integration builder

    hi friends..
                      While i am trying to access the transaction <b>sproxy</b> in my receiver R/3 system i am getting message saying "<b>No connection to integration builder</b>(only local data visible)"..
                      I searched in xi forums also.. i couldn't find any solution for that.. Please anybody an help me .. to solve this problem... I am trying to solve last three hours.. Please help to solve this issue...
    Thanks friends
    kumar

    Hi Kumar,
    The same provlem was solved here
    No connection to Integration Builder
    To understand in detail have a look at this
    https://websmp102.sap-ag.de/~sapidb/011000358700001697502004E.PDF
    Topic: 8 Connecting Business Systems with an Integration Engine to the Central Integration Server
    Regards,
    Prateek

  • No connection to integration builder (Only local data visible)

    Hi,
    I am created Interface objects in IR but it is not reflected in SPROXY (ECC 5.0). It is showing like this no connection to integration builder (Only local data visible) please can you  help me necessary configuration.
    Regards,
    -Prabakar.A

    HI Prabakar,
    the Business System SM59 destinations LCRSAPRFC & SAPSLDAPI
      should have the Program IDs
    SAPSLDAPI _UNICODE.
    LCRSAPRFC_UNICODE
    See the online help for connecting Biusiness Systems
    [Connecting Unicode Business Systems|http://help.sap.com/saphelp_nwpi71/helpdata/en/c9/7a1041ebf0f06fe10000000a1550b0/frameset.htm]
    see also
    [Connecting to the Integration Server|http://help.sap.com/saphelp_nwpi71/helpdata/en/c9/7a1041ebf0f06fe10000000a1550b0/frameset.htm]
    Regards
    Kenny
    Edited by: Kenny Scott on Feb 25, 2010 5:02 PM

  • No connection to Integration Builder (only generic data visible)

    hi,
    I am facing one problem in IDES system when connecting to proxy from my XI system.
    No connection to Integration Builder (only generic data visible)
    For this when I tried to create rfcu2019s type G and H in the IDES system, in that both rfcu2019s when testing it is giving the following msg.
    ICM_HTTP_CONNECTION_FAILED
    Is anything I need to do before connecting to RFCu2019s type G and H.
    thanks in advance.

    Hi,
    Check this URL:
    SAP NetWeaver Troubleshooting Guide:
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/bd5950ff-0701-0010-a5bc-86d45fd52283
    Thanks,
    Boopathi

  • No connection to Integration Builder (only generic data visible)(SPROXY)

    Dear All,
    I am Establishing connection between BW and XI.
    I am getting "No connection to Integration Builder (only generic data visible)" error while opening SPROXY T-Code, also it shows user Menu Disable.
    Please suggest me to solve the error.
    thanks,
    RP

    hi RP,
    I too had same problem, below are the things taken care and finally fixed.
    1. SLDAPICUST settings pointing to SLD system & port
    2. Create SAPSLDAPI & LCRSAPRFC RFCs pointing to program ID created with SLD and XI system using VA (JCo RFC provider)
    3. Set the require settings with RZ70 pointing to XI system name & HTTP port
    4.Create ABAP based HTTP RFC pointing to Target system (XI system ) with HTTP port (smicm-goto-services) and path prefix with "/sap/xi/engine?type=entry" (without quotes). Ensure this RFC is existing at both the ends (source & target).
    5. If incase all ready the Technical System & Business existing at SLD for your business system, you may require to remove them and add them back/manually.
    Please let me know if any more info require.
    Thanks
    Chandra

Maybe you are looking for