Integration connections to bring master data into APO and BW system.

Hi All,
Can somebody give step by stip activities to be done FOR creating integration connection for following requriment.
1)  To bring master data from R3 System to APO system through BI CUBES using BI type connection
2) APO/R3 type connection R3 system to APO system.
Regards

Nikhil,
Request you to let me know how can basis person helps in this.
  If this is an existing system, the applications team (APO and BW) will not require much assistance from you.  You can mostly sit back and watch them do all the work.
I suggest that you read the help link in its entirety provided by expert Datta.  Much of the info there is helpful for both solutions.
For the APO interface (question 2 in your original post) there is a complete step-by-step guide provided by SAP.  Check these two docs out.
http://help.sap.com/bp_scmv250/BBLibrary/Documentation/B02_BB_ConfigGuide_EN_DE.doc
http://help.sap.com/bp_scmv250/BBLibrary/Documentation/B05_BB_ConfigGuide_EN_DE.doc
If you are being asked to select from one of the two scenarios you outlined, the standard Core interface is by far the simpler to implement.  Plus, it has the advantage that SAP will support you when something goes wrong.
The BW solution is different, in that the developer (you?) MUST have detailed specifications before he can proceed.  Which master data?  At what organizational levels?  How often refreshed?  What will be the ultimate use of the data, and how must it be stored?  Where will it be stored? How to deal with inconsistencies?  Etc etc. SAP support will only solve technical problems in your solution, they won't solve errors of design or logic, unless you happen to get a very accommodating support person when you raise your message.
But in case a basis person need to create RFC how can it be done for above scenario.
The instructions for creating all the RFC stuff is contained in the connectivity doc I cited above.
Best Regards,
DB49

Similar Messages

  • Master Data in APO

    Hi All
    In APO , How we bring master data into APO from ECC ?
    How about delta synchronisation ?
    what are the prerequisite to this activity?
    Hope you might bring from only ECC or external system?
    Can APO talk to external system other than ECC ?
    are you storing any source of supply info in APO like contract, infor record , SA ?
    Are always pointing to ECC system only for all source of supply reference from ECC ?
    thanks
    Muthu

    OMG.. too many questions.. OK I am trying.
    In APO , How we bring master data into APO from ECC ?
    You do this through CIF, this is path for data transfering from ECC > to APO or APO>ECC
    How about delta synchronisation ?
    This is the change transfer, if any change is made in the datas in ECC you need to transfer those change to APO. You can make it as immediate or periodic.
    what are the prerequisite to this activity?
    which activity? delta transfer?.. you need to have the Open CIF and you have your datas in APO.
    Hope you might bring from only ECC or external system?
    You can. From external sys too. you need different interface or you can upload data from external server or local file tghrough custom transaction.
    Can APO talk to external system other than ECC ?
    Yes.
    are you storing any source of supply info in APO like contract, infor record , SA ?
    Yes.
    Are always pointing to ECC system only for all source of supply reference from ECC ?
    If you have the interface then you can, you need build it
    Now if you want more kindly follow the link below:
    http://help.sap.com/saphelp_scm70/helpdata/EN/9b/954d3baf755b67e10000000a114084/frameset.htm
    Thanks,
    Satyajit

  • Critical Error in master data: Transffered 250056  and added 0 enhancement

    Hi,
    First we have loaded master data into 0CUSTOMER and there after enhanced the datasource and mapped the same in transfer rules and update rules.
    We loaded data again into master data with full update. But  the enhaced fields data is not getting updated. But in PSA data is available.
    We deleted the all master data at Maitainence and relaoded data.
    Now its showing 250056 as transffered and added as 0
    we didnt seen any single record in master data now.
    I have actovated data and attributre change also done.
    But no success.
    Please suggest us what should i do now.
    Thnaks &Regards,
    Revathi

    Hi,
    The data is available for the all enhanced fields in PSA.
    For the master data Text also data there in infoobject maintainece.
    For the enhanced and all the other attributes data is not aviale.
    If i load data again with full load also it is Transffered 250056  and added 0
    But In data load monitor i obseved one thing ....
    in the details tabprocessingdatapavckages--update rules it saying Update rules ( 0 Records ) : No errors.
    But for transfer rules istep it is giving message Transfer rules ( 4139  Records ) : No errors .
    So till here data is processing...in update rules it is not.
    We dont have any routines in update rules. and its one to one mapping.
    Please suggest how to get it resolve.
    Thanks &Regards,
    Revathi

  • Error while loading the master data into hierarchy

    Hi,
    When i am trying to load the master data into a hierarchy, it is showing me the following error.
    "Invalid Entry, hierarchy xxxxxx does not exist".
    Can you please tell me what might be the possible cause for this error.
    Thanks,
    Prateek

    Hello
    Have you created a hierarchy, I mean go to Transfer structure->Hierarchy structure 
    ->create hierarchy, put a check of whether it is sorted or time dependent etc. after that while loading data through infopackage just check that you have selected an appropriate hierarchy name in hierarchy selection tab.
    Hope it will help!!
    Regards,
    Sandeep

  • Caller-70 Error while loading master data into infoobject

    hi ,
    I am getting following error while loading master data into infoobject (0tb-account). I am loading this master data in production environment for the first time. there are about 300000 records. All have got loaded upto PSA. Infopackage settings were PSA and then into data target.
    Short dump in the Warehouse
    Diagnosis
    The data update was not finished. A short dump has probably been logged in BI. This provides information about the error.
    System Response
    "Caller 70" is missing.
    ST22 dump analysis is as below:
    Termination occurred in the ABAP program "GP476CZYBEF2WX53UZ8TXFG6XOS" - in                  
    "VALUE_TO_SID_CONVERT_DB".                                                                  
    The main program was "RSMO1_RSM2 ".
    Please help as soon as you can..Production problem....
    Regards
    Rakesh

    Hi rakesh,
    May be IDOCs not processed completely,
    Idoc Problem, Either wait till time out & process Idoc from detail monitor screen, or go to BD87 & process Idoc with status = YELLOW ( be careful while processing IDOCS from BD87, choose only relevant Idocs
    Cheers
    Raj

  • How to include the UDF of items master data into PLD (Inventory in Warehouse Report (Detailed))

    Hi,
    Is there a way to include the UDF in the items master data into the <<Inventory In Warehouse Report (Detailed)>> PLD?
    I checked the default layout and found out all the column source type is "free text" and the content is #Item, how do I know the value of the UDF?
    Thanks

    Hi,
    Some of the standard reports are hardcoded in sap. Not possible to add UDF field in PLD.
    Also refer this thread Variables -  Sap business one
    Thanks & Regards,
    Nagarajan

  • How to downlaod vednor master data into excel sheet in SAP Application serv

    Hi friends
    I want to download SAP vendor master data into excel sheet and the file should be stored in SAP Application server Location with padding zeros.
    Please help me.
    Thanks

    Hi Ramesh,
    It is not possible to download data in Excel file on application server. You can better download the same in tab separated text file and then convert that text file to XLS.
    Please do not open multiple threads for same problem.
    Regards,
    Atish

  • How to downlaod vednor master data into excel sheet in SAP Application ser

    Hi friends
    I want to download SAP vendor master data into excel sheet and the file should be stored in SAP Application server Location with padding zeros.
    Please help me.
    Thanks

    Hi Ramesh,
    You can download the data into application server using the following code. You will have the vendor details in the internal table. Then you will open a file and transfer the data as follows.
    *   Download internal table to Application server file(Unix)
    DATA: e_file like rlgrap-filename value '/usr/sap/tmp/file.txt'.     
      open dataset e_file for output in text mode.
      lOOP AT it_datatab......
        transfer it_datatab to e_file.
      ENDLOOP.
      close dataset e_file.
    In application server you will have only files and not excel sheets.
    Reward points if useful,
    Aleem.

  • Loading InfoObject master data into Cube

    Hi Guys,
    I have a  question. I created an InfoObject as a data target and loaded data into that data target. I created a cube and I want to include this infoobject in the cube. Now How do I load data into this cube from the InfoObject.Because the InfoObject doesnt have any option to select data targets, since it is master data.
    Data is being loaded into the InfoObejct. But when I check the cube there is no data.
    How do I load this master data into the cube without update rules?
    Thanks in advance.

    Hi,
    i think u need load some value to transaction data so that you can report on it, but how you are going to decide which row will be having which value from master data? in general value for this should come from transactional data, or you could assign some constant value to it.
    Do you want to use any attribute of Inoobject in report? And if you have any key value for that coming from Transaction data, you can use rule type as read from master data
    It depends upon your requirememt.
    Since you want to restrict the values of the cube which are going into the report then you should include this object into the cube.
    In any case if you want to restrict the value of the transactional data in the cube with either the value of the objects ot the attributes of object you will have to add this object into the cube.
    As you said you can load master data and use in report but how you are going to use it..............you will have to include it in the cube to use it.
    Also you can check whether this object is attribute of some other object already in the cube in that case you can make it navigation attribute and then use it for the restrictions in the cube.
    In this case only you do need to add it to the cube,But if it not an attribute of any object then you must add it to the cube.
    You have to get the value of your infoobject into Cube from datasource, even though you want to use attributes only.
    You will have to add it and it wont have any effect the transaction data getting loaded into the cube will be different from the master data only SID's are matched during loading of the data.
    You should load separate master data into the 0recontract infoobject with the master data source and make the respective object contract type and contract category as navigation there.
    Also you should add 0recontract to the cube and update it from the transaction data source as you have said that it can be updated.
    Then just do the normal restrication at the report level
    You can make this display attribute as naviagatioonal first in the master data object and then in the cube make this attribute as navigational.
    then you can use it to restrict in the cube
    You can use Category as InfoObject in your cube, and while loading data for your infoobject in the rule type you can use option as reading from master data. It will take key of infoobject, and will update attribute value in your cube.
    http://help.sap.com/saphelp_nw04s/helpdata/en/e5/f913426908ca7ee10000000a1550b0/content.htm
    You can also restrict with attributes value, Just in the restrcition of your infoobject in query designer, slelect left-botton button of 'Dipaly Other Values', here you can select you attribute and its value for restriction as well
    Regards,
    Hareesh

  • Bringing xml data into flash

    I would like to know how to bring xml data into flash.
    Specifically images that someone can click on the thumbnail and
    view the larger image. please can anyone point me to some tutorials
    or sites that i can start to learn how to do this.
    thanks.

    Hi
    First of all, read every thing you can in Flash Help to get
    to know the different methods of loading XML.
    XML can be loaded with 'built-in' components or parsed in
    Actionscript, the Help files will explain both.
    Next - Google for 'XML Image or Picture Gallery' you'll find
    plenty
    Hope it helps

  • To load master data into infoobject 0mat_unit

    Hi Experts,
    Cud you pls give me any idea to load master data into infoject 0mat_unit from R/3.
    We need more than 10,000 master data into 0mat_unit. How can I collect data from R/3 for different attributes of infoobject 0mat_unit?
    I will assign full points for suitable solution.
    Thanks in advance!
    Sapna

    Hi Sapna,
    See
    <a href="http://help.sap.com/saphelp_nw04s/helpdata/en/e3/e60138fede083de10000009b38f8cf/frameset.htm">DataSource in the SAP Source System</a>
    Udo

  • Loading Master data into BPS through layouts

    Hi SAP Gurus,
    Is it possible to load the master data into BI-BPS through layouts(in BI 7.0
    Thanks in advance.
    Regards
    Pradeep

    Hi Pradeep,
    if its combination of charactertics & keyfigures, then you need to load master data in Info objects(Characterstics) and for key figures you can load directly in the layout, once you save it , these values get saved back in Cube.
    Hope this helps
    Regards
    Imran

  • Loading Master Data into a DSO

    Hi Experts,
    I am unable to analyse whether loading data from Master Data InfoObject into a DSO will cause performance issues or will that work fine.
    I was trying to do the same.  Awaiting for your inputs on that.
    Thanks,
    Vijay

    Latha,
    Loading master data into a DSO can be done using the following steps:
    1) Right click on the DSO and select Create transformation... option.
    2) In the dialog box that appears, select Object Type as InfoObject and in the text box right below you give the name of the object.
    3) In Subtype of Object selection, select attribute or text as per your needs.
    4) select ok and you should see the transformation, map and activate the transformation.
    5) create DTP and run it.
    Hope this helps, [ you got my name wrong im vijay]

  • Loading Master Data into ODS

    Hi,
         Can anyone tell me how to load the master data into the ODS?
    Thanks
    Yadav
    Edited by: yadav on Apr 12, 2008 8:04 PM

    Dear Yadav,,
    U can load the master data to ur ODS..
    The Process is same as loading Transaction Data into ODS but..
    1. U need to do  flexible Update instead of Direct Update...
    2. Maintain all the Attributes in ur DATA part...
    3. The record on which Updation depends should reside in the KEY FIELD section.
    But there is difference in loading master data to info object and ODS..
    If loaded in Info Objects..REusability is there.
    But in ODS no reusability...
    Hope this helps u...
    Assign points if helpful...
    Best Regards,
    VVenkat..

  • Can I reuse objects without Master data and load master data into it?

    Hai,
               I have a standard object that doesnot have Master data. Its already used somewhere else. It matches the name I want but I need to load some master data into it. Does resuing it in my catalogue and loading Master data into it hurt anything? Or should I create a new one?
    Thank you.

    Hi Visu,
    The same InfoObject can be included in more than one InfoObject catalog without any issue. Also loading master data would not hurt an existing InfoProviders where it is being used.
    Hope this helps...

Maybe you are looking for