Integration Crystal 2008 in C++ builder ?

Hi,
I use c++ builder developpement tool. How can i integrate or connect to crystal report 2008 viewer.
I search since several weeks but i found nothing.
Best regards.

Hi Microside,
You can download the Crystal Report Integration kit in C++ builder from bellow:
http://www.businessobjects.com/products/reporting/crystalreports/vcl/default.asp
All the Best,
Madhu...

Similar Messages

  • Integrating Crystal Report 2008 Developer with Visual Studio 2008 Standard

    I have Crystal Reports 2008 Developer version 12.0.0.683 on my computer. I also have Visual Studio 2008 Standard. I know the standard edition of VS 2008 does not have the bundled crystal reports, but since I bought the full version of CR 2008 separately, I figure I should be able to use CR within VS 2008. The problem I am facing is integrating Crystal Reports with Visual Studio, so I can create reports from within visual studio.
    Crystal Reports was installed first and then Visual Studio. As per suggestions on this and other forums, I repaired my installation of Crystal Reports, but that did not help. I then ran Visual Studio integration manager, but when I run it, it only detects Visual Studio as the currently installed IDE, but does not detect CR 2008. I downloaded service pack 2 for CR, but have not installed it yet. I do not want to install it if it is not going to help. I would also like to avoid uninstalling my copy of CR if at all possible.
    I am a newbie at development in visual studio. Any help will be highly appreciated.
    Thanks,
    Rajib

    Don't want to go against what Jason said as it may be correct - if we go strictly by the documentation provided (sorry Jason, Dan says...). However, here is something to try;
    Uninstall CR. Look for any left overs; c:\program files\business objects\... and delete all of that.
    Look in the registry for HKLM\software\business objects and remove the business objects entry.
    Download CR 2008 from here:
    http://www.sap.com/solutions/sapbusinessobjects/sme/freetrials/index.epx
    That is a trial version and I believe it is already at SP 1. Use your keycode to install. Once this is done, you should have the ability to use CR in .NET. I'd recommend you do apply sp 2 now also.
    Ludek
    Follow us on Twitter
    http://twitter.com/SAPCRNetSup

  • Integrating Xcelsius into Crystal 2008

    Post Author: Treznor
    CA Forum: Xcelsius and Live Office
    Hi there,
    I'm trying out Crystal 2008 and Xcelsius but seem to have run into a problem... When I go into the Flash Data Expert I only seem to have the tab for creating variables... Not for binding fields from my existing report.
    Could someone tell me if the beta is in some way restricted in this sense or (much more likely) that I don't know what I'm doing.
    Cheers in advance for any help you can offer.
    Mat

    There is a good whitepaper available here:
    http://diamond.businessobjects.com/node/4621

  • Error while Connecting Crystal 2008 to SAP.

    Hi Experts,
    We have a trial version of crystal 2008 installed (The SAP integration Kit is also installed) and I am trying to connect to SAP and develop a report on the SAP Cubes. But when I try to make a Connection to SAP, I get the following error:
    Database Connector Error: 'The License key does not include use of the BW Query Driver. Please Contact Business objects for information on how to obtain such a license key.'
    Is this a licensing issue with SAP integration kit or Crystal?
    Please let me know what would be the probable problem and solution for it.
    Thanks for your help in advance!
    Phani.

    hi,
    for SAP Integration Kit license kay updation; follow the steps
    Go to windows start menu>Run>type regedit> HKEY_LOCAL_MACHINE>Softwares>Business Objects>Suite 12.0>SAP>keycode.

  • Installing Crystal Reports 2008 fix pack 2.6 is breaking Crystal 2008 exe.

    I have a package created to deploy Crystal 2008.  I have included in my package SP1 and SP2 and that all works great.  However, the issue is when I push fix pack 2.6, once that is pushed, and done running, then I try and open up Crystal 2008 I get an error that says, the exe can't be found or is corrupt, try to reinstall the program again.  I can get the fix pack 2.6 to work fine when I manually install it.  Is this an issue because fix pack 2.6 has to self extract first? 
    Please let me know what I can do to get everything working in the package, so I don't have to manually run the fix pack 2.6 manually.
    Thank you.

    What you are doing is not supported at all and may be a violation of the licensing. For users to get Crystal Reports Designer they must purchase a copy from SAP sales only unless you are an OEM partner and licensed to distribute in this way.
    In all cases though we don't support building your own MSI in this way, only for distributing the runtime for an application you wrote. Installing Crw32.exe must be done from one of our CD's.
    Please explain why you are building the MSI this way and if you are OEM Partner? If you are an OEM who is Account Manager here?
    Thank you
    Don

  • Crystal 2008 - Changing Paper Trays

    I am building a report using Crystal 2008.  I need to have page one print to one paper tray and the subsequent pages print to another paper tray using the same printer.  I have not been able to find an option to modify the paper tray or paper source in Crystal 2008.  Is this possible?

    No

  • Problems getting Excelsius 2008 line chart to integrate into Crystal 2008

    I am playing around with integrating excelsius 2008 into Crystal 2008 and I can't and am getting rather frustrated.  I have a simple output of the following:
    Month     % 1st delivery - Actl
    1                   65.00
    2                   89.80
    3                   85.00
    4                   87.50
    5                  
    6                   91.90
    7                   94.80
    8
    I set up a line chart for 1 series, the series being the month and charting the delivery %.  Very simple.
    The way I have the xcelsius data manager set up is that my Row Headers go from A2:A13 and the data goes from B2:B13 and my chart is set up to ignore blank cells.  I then saved that as an SWF file and pulled that into Crystal.  I mapped the Month column into the row label and the % 1st delivery - Actl into the data value.  What I get is a chart with just a value of 1 across the bottom and values of 0, 1, 2, 3, 4, 5 and 6 going up the left.  Basically, nothing.
    Now, if I go back into the Flash Data Binding Expert on the Crystal report, click on my data column, click on the options button and change the summary from sum to count, it seems to work.  I get a chart that has 1 - 8 across the bottom and a value of 1 on the chart for months 1 - 4, 6 and 7.  Now, if I go into my database and add another row for month 6, the chart now shows 2 for month 6.
    So basically, I can't get anything charted on this xcelsius chart exept for a count of my data values.  Any ideas?  I'm stumped and frustrated and would great appreciate any assistance.  Thanks in advance.

    Hi Joe,
    This is a known issue for CR 2008 and was fixed for CR 2008 and MS SQL Server 2008. It was not fixed for SQL Server 2005 using the SQL 2008 native driver as we do not support the MS SQL 2005 native client.
    I never tested it against MS SQL 2005 because we did not support the native driver for 2005. It may work using the 2008 native client but you'll have to download Fix Pack 2.7 for CR 2008, requires Service Pack 2 first.
    The cause is CR does not recognize the new SQL server native dll so it reverts to a default SQL syntax for that function.
    If it does not work, not officially supported, we won't be able to fix it. Options are to upgrade MS SQL server or use ODBC or OLE DB to connect using the MDAC client for MS SQL server 2005.
    Thank you
    Don

  • Inserting table in Crystal 2008

    Do I have an option to use tables to display data . I am trying to work on crystal 2008 report, but I am unable to find option for inserting table. I had to use line/boxes for making a table format.  I tried to do best to properly aligned them uniformly but I guess still not able to do perfectly. Do I have an option in Crystal 2008 where I can use tabular structure to display my data?
    Please let me know. Thanks

    Hi,
    There is a CR2008 format called Cross-tab report. You can run the Expert to help generate a report from scratch or add one to an existing report. The x-tab report works similar to pivot tables in Excel.
    Depending on the content, this pre-defined layout may work out nicely and saves a lot of time. If not, you may have to build your own from scratch, which I have had to do because of the way the x-tab report works.
    If you are trying to line up columns of data and that is where the layout needs tweaking, display the Ruler and you can use the 'guidelines' (look like tab markers in Word - little gray arrows) to align your cells. You may also want to check your Options setting (under "File") to see if 'snap to grid' is active or not as this can making aligning cells more difficult. I always remove 'snap to grid' and set 'grid size' to 0.01in, smallest setting. Once I have the report done, then I apply any lines/boxes as it can make it very troublesome to have to make changes once they're added.
    Heather

  • Can not see two fields in Crystal 2008 Developer explorer/designer view

    I am currently developing crystal 2008 reports against the salesforce.com database using version 12.0.0.683 CR Developer Full version. I am using an updated driver that was provided in July or Aug 08 in order to view self referencing fields. The problem is that when I try and report against one of the tables (lead history) I cannot view two of the fields (New Value and Old Value)? I can see these two field (New Value and Old Value) in the database expert as the last two fields in the actual table, but the two fields are missing when I go into the explorer/designer view. In Salesforce, these two fields can not be filtered on, but I can export all the values in this table using Salesforece Apex data loader.

    Please re-post if this is still an issue to the OnDemand Forum or purchase a case and have a dedicated support engineer work with you directly

  • Crystal 2008 - Selected table names are blank or end in 1

    I am creating a new report in Crystal 2008.  I am connecting to a database using ODBC.  The tables show up correctly in the available tables column of the Database Expert.  Once I select a table the table shows up in the selected tables list as an icon only - no name or as an icon with a table name ending in 1.  The table name that ends in 1 is not a duplicate.
    Furthermore, in the field explorer the fields all show but I can not add any to the report.
    Any ideas, this just started happening this week.

    Hi Russell
    Which database you are reporting off?
    You can try following workaround and create indirect ODBC connection.
    Create a report using OLEDB connection and select Microsoft OLE DB Provider for ODBC drivers and then create a report .
    This will point to your existing ODBC connection through OLEDB provider.
    For the tables name that are blank do you have hyphen '-' in their names?
    As advised by Jayendra you can try with Service Pack 1for Crysatl Reports 2008.
    Hope this helps..
    Regards
    Ankeet

  • Viewing Crystal 2008 ActiveX  on Access 2007 forms

    Ok, i am a little confused as there seems to be a some doubt whether Crystal 2008 ActiveX can be used on Access forms. Another thread even has a reply that mentions that the ActiveX control is no longer included in Crystal Reports 2008..... Take a look at this, you can clearly see i have embedded the 2008 ActiveX control onto an Access form. link:[http://www.moktar.pwp.blueyonder.co.uk/AX.JPG]
    I have just installed 2008 and will get round to looking at this, however in my brief look, i couldnt see the run time library for 2008. By all accounts you can freely distribute the run time files for Crystal Reports 2008 as MSI or exe packages to your clients. I hope this is the case and i can get the ActiveX working.
    If anyone has some information on this subject i will welcome reading it.
    This is how its used to be done;
    1) Open the Access form in design view.
    2) Click on Add Tool button on the toolbar.
    3) Select Crystal Reports ActiveX toolbar control from the list of controls.
    4) Place the control on the form.
    5) Click on the View Code toolbar button to open the code for the form
    6) Choose u2018Referencesu2019 from the u2018Toolsu2019 menu
    7) Select u2018Crystal Reports ActiveX Design and Runtime Library 11.Xu2019 from the list of references and add to the project.
    8) On the Form_Load() event, please use the code given below to pass the report to the viewer:
    Dim crReport as CRAXDRT.Report
    Dim crApplication as New CRAXDRT.Application
    u2018 Use the appropriate path for the report
    Set crReport = crApplication.OpenReport(u201CC:\Report1.rptu201D)
    u2018 ReportSource property and ViewReport method will not be displayed on the viewer control
    CrystalActiveXReportViewer0.ReportSource = crReport
    CrystalActiveXReportViewer0.ViewReport
    'Hey Presto, the Crystal control on the Access form is now displaying a report. However, you had the age old issue of distributing the runtime files to clients that dont have crystal reports installed, and even more so of an issue, as this is Access and no method of doing it. I was hoping that 2008 with its MSI and EXE versions of the runtime files would solve this age old problem.
    Thanks
    Simon.

    Hello Simon,
    The RDC was retired after Crystal Reports XI R2 and no longer exists in CR 2008.
    The viewer control you are seeing is not meant for RDC applications.
    You will need to move to Java or .NET if you plan on using CR 2008.
    Best Regards,
    Jason

  • App coded in Crystal XI need to be compatiable with Crystal 2008. Options?

    Dear All,
    The product I am working on, works fine with Crystal XI. But now task is to make it work for clients that have just Crystal 2008 (not Crystal XI). (Even assuming there is no new feature that Crystal 2008 offer is planned in this existing application.)
    I was wondering what would be the best bet to make that application compatiable? Certainly we do not want to have two seperate application coded separatly for Crystal XI and Crystal 2008.
    I will appreciate any information, feedback, guidance that you can provide on this.
    Thanks

    am actually using Visual Studio .NET 2008 only with Crystal Reports XI R2. I was not aware of the fact that Crystal Reports XI R2 does not work with Visual Studio 2008. It could be that since I have both Visual Studio 2005 and 2008 in my machine, and this could be referring to old one.
    I believe Visual Studio 2008 came with .NET framework 3.5 and in theory 3.5 does all that 2.0 used to do. So I am not sure what would be the reason of .NET 2008 not supporting it. May be I am missing something, please help me clarify?
    - See the supported platforms doc here:
    https://websmp106.sap-ag.de/~form/sapnet?_SHORTKEY=01100035870000712240&_SCENARIO=01100035870000000202
    (choose Business Objects XI release2 / crystal reports -> crystal reports -> crystal reports XI r2 -sp2 - supported platforms.
    .NET 2008 is not listed. That is as far as this discussion should need to go. E.g.; do not use CR XI r2 with .NET 2008, or .NET 2010 when it comes out - if you do, you're on your own.
    Option-1) Now my worry is can same application; when installed on a client who has just crystal report 2008 (not upgrade from XI-R2) run-time installed, will work OK?
    As long as you run CR XI r2 with the supported version of .NET (e.g.; in your case .NET 2005) there will be no issues after installing CR 2008 as CR 2008 and CR XI r2 are side by side compatible. One thing I would highly discourage is running reports created in CR 2008 with CR XI r2.
    Option-2) Is there any change in existing code, I need to do so that irrespective of what run-time environment client has (XI R2 or, Crystal 2008), my application runs fine without any issue?
    If you install CR 2008 SP0 after installing .NET 2008, you should not need any code modification to an already working app. All that will happen is that the CR assemblies will get upgraded to version 12.x. Of course, you then need to distribute the CR 2008 runtime to your client / server computers.
    Any other option...
    Not sure where the confusion is, but I am not sure why we'd want to look for other options(?).
    Ludek

  • Prompts to install Crystal 2008 SP1 each time I double-click .rpt file

    Every time I want to open a report (.rpt) file from Windows Explorer, I get a message box stating:
    Preparing to install...
    Followed by another message box:
    Please wait while Windows configures Crystal 2008 SP1
    Followed by another message box:
    The feature you are trying to use is on a CD-ROM or other removable disk that is not available.
    Insert the 'Crystal Reports 2008 SP1' disk and click OK.
    I select cancel at this point (I've already got Crystal Reports 2008 SP1 installed on my machine).
    After I select cancel, the following error appears:
    Error 1706.  No valid source could be found for product Crystal Reports 2008 SP1. The Windows installer cannot continue.
    I click OK and the report does not open.
    If I start Crystal Reports itself, then select File, Open and select the report to open, it opens fine (without error).
    The version of Crystal Reports (from Help, About Crystal Reports) is:  Version 12.1.0.892
    How can I resolve this without searching for the Crystal 2008 SP1 files (which were downloaded from the SAP/BO website).

    Hi Nancy,
    I've seen this happen usually when Windows Office has also been installed. The installer gets confused as to what should be installed or some dependency is missing. Not sure exactly what causes it.
    Go into Control and Add/Remove Programs and try doing a repair install for both CR and SP1. Then open up Explorer and click on Tools, Folder Options and then File Type. Scroll down to RPT and click on Change or Restore. Ther main be something missing from the File type association.
    Be sure to do this when you are logged in as local Administrator and/or your account is also configured to be part of the Local Admin group.
    Thank you
    Don

  • Getting Error while integrating Crystal reports with Java

    Hi All,
    I am getting below error while integrating crystal report with java
    [java] os.arch = x86
    [java] java.lang.NoSuchMethodError: com.crystaldecisions.Utilities.d.<init>
    (Ljava/awt/Image;I)V
    [java] at com.crystaldecisions.Utilities.af.try(Unknown Source)
    [java] at com.crystaldecisions.Utilities.af.a(Unknown Source)
    [java] at com.crystaldecisions.Utilities.af.<init>(Unknown Source)
    [java] at com.businessobjects.crystalreports.viewer.applet.g.a(Unknown
    Source)
    [java] at com.crystaldecisions.ReportViewer.ReportViewer.start(Unknown
    Source)
    [java] at ReportViewerFrame.<init>(ReportViewerFrame.java:51)
    [java] at JRCViewReport.launchApplication(JRCViewReport.java:29)
    [java] at JRCViewReport$1.run(JRCViewReport.java:50)
    [java] at java.awt.event.InvocationEvent.dispatch(InvocationEvent.java:
    178)
    [java] at java.awt.EventQueue.dispatchEvent(EventQueue.java:443)
    [java] at java.awt.EventDispatchThread.pumpOneEventForHierarchy(EventDi
    spatchThread.java:190)
    [java] at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDisp
    atchThread.java:144)
    [java] at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.j
    ava:138)
    [java] at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.j
    ava:130)
    [java] at java.awt.EventDispatchThread.run(EventDispatchThread.java:98)
    Any help can be appreciated
    Kalyan

    Hi All,
    For got to mention i am using crystal reports XI release 2 with JDK1.4.
    Kalyan

  • Authentication issues on Windows 7 with Internet Explorer 8 (Crystal 2008)

    Hi,
    We are in the process of migrating from Windows XP to Windows 7 (with Internet Explorer 8).
    I have noticed that a web application which depends on Crystal 2008 is behaving differently in the new environment. For example, when I try to load a report I get this error:
    Access to report file denied. Another program may be using it.
    I know that this error can be caused by a permissions problem on the Windows temp folder, and I know there are various ways of pinpointing the exact permissions problem and various ways of resolving if that's the case. The fix that worked for us in Windows XP does not seem to work in Windows 7. My gut feeling is that IE is passing credential in some way differently from how it did before.
    Since many aspects of security are so different in Windows 7 compared with XP, I was hoping to find some general guidelines from SAP/Crystal re: how to deploy or configure the client/server in this environment.
    Are there any general guidelines available?
    Thank you for any help... shannon

    Hi Shannon,
    Not really, CR assumes it can access all of it's dependencies so it is a permission issue. Other than the usual config issues with IIS, full access to the      emp folder, full permissions on the Viewer folder, setting the framework in App pool correctly, etc.
    Do you have Service Pack 3 installed for Cr 2008 and the latest Fix Pack 3.5?
    https://smpdl.sap-ag.de/~sapidp/012002523100009989492010E/cr2008_sp3_fullbuild.zip ( requires uninstall first -  keycode is required )
    Incremental for SP2 - https://smpdl.sap-ag.de/~sapidp/012002523100007123572010E/cr2008_sp3.exe
    Fix Pack: https://smpdl.sap-ag.de/~sapidp/012002523100006341722011E/cr2008fp35.exe
    References for WEB app's:
    [Crystal Report Viewers in Visual Studio .NET u2013 Toolbar Images|http://www.sdn.sap.com/irj/boc/index?rid=/library/uuid/50aa68c0-82dd-2b10-42bf-e5502b45cd3a]
    This one could be a great reference also:
    [Deploying Crystal Reports 10 .NET Applications|http://www.sdn.sap.com/irj/boc/index?rid=/library/uuid/30c6d7c6-7164-2b10-90b8-d6020b116f4d]
    You could also use Process Monitor from Microsoft and scan the log file for Access Denied on the IIS Process.
    And also search [Microsoft's Forums|http://social.msdn.microsoft.com/Search/en-US?query=iis%207%20configuration%20and%20security&Refinement=123&ac=3] on how to:
    Thank you
    Don

Maybe you are looking for