Integration Directory, Cache Notifications with error

Guys,
In Integration Directory, I create one Comunication Channel, but, when i actived one, it dosnt appears in RWB Comunication Channel Monitoring.
In Integration Directory -> Environment -> Cache Notifications, show the following error:
Integration Server (Central Adapter Engine) | Directory Change List | pisuper | Standard Change List
With "Standard Change List" as: Not Yet Started
Details: Never change Status.
Can anybody help me?

Also check in SLD technical system for Exchange Infraustructure.
Check weather Adapter enginer is registered or not.
Your XI domain should contains 6 entries
1.Adapter engine
2.Domain
3.Integration Directory
4.Integration Repository
5.Integration Server
6.RWB

Similar Messages

Integration Directory - Cache Notifications Error!!

Hi ,
When i try to select "Cache Notifications" in directory i am facing this error below.
Unable to determine the name of the central Adapter Engine from the System Landscape Directory at this time. Notifications to the central Adapter Engine are therefore listed using the technical name of the Adapter Engine. This is usually structured as follows: af.<SAP System ID>.<Name of application server>
I can see in SLD -> technical system -> exchange infrastructure, the entry for Integration Directory is missing. I ve applied note 764176 , but it is not helping. Similarly the entry for RWB is also missing here.
ve checked in SLD -> Admin -> Content Manitenance and the assocations are missing for IR & RWB. I beleive these errors are closely related. ve chked exchange profile XIDIRUSER & XIRWBUSER pwds , chked the roles , they are the same as our DEV / QA envionments.
Can anyone pls point what am i missing here
Thanks
Saravana

Hi Saravana,
About the roles for XIRWBUSER...you can check the same in the ABAP stack...go to transaction SU01 and check the Roles attached...it should have the following entries...
SAP_SLD_CONFIGURATOR
SAP_XI_RWB_SERV_USER
SAP_XI_RWB_SERV_USER_MAIN
These should be sufficient as it is working for us...also...the roles gets passed along from the abap stack to the J2ee stack....
Now to your original issue...we had to change our sld in our system to a new box and had to re-configure....we got the same error that you were getting...
we corrected it by doing the following...
Corrected the entries in the Visual Admin under SLD data supplier service... for the HTTP tab as well as the CIM tab.
Did the SLDCHECK(TCODE on abap stack) and made sure everything was ok....
Did a CPACache refresh full...and of course a restart....
that solved the issue for us...
Thanks,
Renjith

Integration Directory - Cache Notifications

I just installed QA box. I am trying to move my Integration Directory objects. When I do cache notifications in ID I get an error in the cache notifications Integration Server (ABAP Cache).
Any help is appreciated.

Hi Michael,
What type of error are you getting ?
Anyway if you did not go thru this document, then please have a look into this-
https://websmp101.sap-ag.de/~sapidb/011000358700003163902004E/HowTo_handle_XI_30_Caches.pdf
Hope this helps,
Regards,
Moorthy

Putting a row into a pageable cache failed with error 9 and error message

Hi Guys,
I am fetting the follwoing message when the job is scheduled.
Putting a row into a pageable cache failed with error <9> and error message <Db::put: Bad file descriptor>
I read the forum and Manoj has suggested to one of the forum member to change the size of the Pcache setting through the server manager. But I do not see the setting there. can any one please let me know where exactly I can see and increase the size of the Pcache.
Thanks

Hi
I've had the same problem. We know from other (more meaingful) error messages that we ran out of space for the Pageable Cache, but we've just increased it by 50GB and still get the same error.
Anyone??
Btw i don't think you there is a setting for PCache size - it will just use all the free disk you have on the drive where you have located the PCache directory.
Richard

SXI_CACHE - Integration Directory Cache problem

hi
im getting this on 001 but not xxx client.
I id post installation also. i switch client 001 to another.
while SXI_CACHE - Integration Directory Cache TC i can't see cache also manu option that adpter engine.
Thanks
Sachin

Check if the right client has been identifies as integration server in SLD and check right URL has been mentioned in SXMB_ADM.
VJ

Directory Caching issue with Cisco Jabber client for Windows

Hi ,
I am facing cache issue with Cisco Jabber client for Windows. If I do any change related to modification or deletion of contacts in Active Directory/ Callmanager, it does not reflect in the Jabber. Because jabber takes the contacts from the locally stored cache file in the Windows system.
Every time I have to remove the cache file to overcome this issue, practically it's not possible to do the same with all the Widows users. As, if any employee leaves the company and still I can see his contact appears in the "Cisco Jabber client". I have not seen this issue with Android/Apple iOS.
Is there any automated way to remove the cache file?
Here is the detail of CUCM,Presence and Jabber.
CUCM version: 9.1.x
Presence : 9.1.X
Jabber : 10.5 and 10.6

Hello
On our environment we had to install a dedicated Microsoft Certificate Authority "just for Cisco Jabber usage" to house the
Network Device Enrollment Service.
Our certificate for the CUPS were generated on this Certification Authority too.
I discussed this certificate matter with my colleagues this afternoon and nobody seems to remember how these certificates were deployed into the
Enterprise Trust store for the users.
But I think they asked all 400 users to accept the 3 certificates by answering "yes" to the popup instead of using a script deployed by GPO...
I wish you success with that deployment and really hope you have a technical partner that *Knows* this subject.
Our partner left us alone with that unfortunately.
Florent
EDIT: If the "Certutil script method" works, please let me know. This could be useful in our own deployment.

To get notification with error's code

Hi everyone,
Database Control
OMS:
OMS_VERSION=10.1.0.4.0
EMAgent10.1.0.4.1
When some error happend in Database, by Notification I just get like this on mail:
Name=test
Type=Database Instance
Host=dba
Metric=Generic Alert Log Error Status
Timestamp=29.04.2008 12:35:03 GMT+05:00
Severity=Critical
Message=2 distinct types of ORA- errors have been found in the alert log.
Rule Name=Database Availability and Critical States
Rule Owner=SYSMAN
but in message just "distinct types of ORA- errors" without code of error like ORA-01550 or any other kind of code.
Is it possible to get distinct code of error in message through Notification ?
Will be glad to any helpfull advice.

DBMS Direct,
But in the post How to be notified for all ORA- Errors recorded in the alert.log file
11iuser complain about that why he/she just get error number without any explain of arrised error.
In my situation I just get "distinct types of ORA- errors" without even any error code.
Perhaps I need to change something in emoms.properties or emd.properties.
By the way I select Message format -- Long Format
Sorry for my poor English

Integration of OA notification with workflow

Hi,
In AP Invoice Hold Notification workflow i have to add one more new column and show in the notification page.
Eventhough i add link in notification page tru personalization but it wont displayed in workflow mail. but i can able to see in notification page.
can any one help me achive this....
Jai

not sure.. but just make sure that you are testing this for new notifications after you done changes. Don't test it for old notifications.
Please tell me all the steps done by you in detail..

Cache Notifications Error in Integration Directory

Hello,
I'm having an interesting problem at my client's PI 7.0 system. When I update my changelist, I can see problems in Integration Directory - cache notifications. Integration Builder works fine. When I retry the cache refresh manually, I turns to green.
But, Communication Channels with adapter type XI are not created even when I activate my changelist and manually fix the cache refresh if there are errors. All other adapters can be seen in Component Monitoring - Adapter Engine - CC Monitoring, but XI type adapters are not there.
How can we resolve this problem?
Thank you,
Gökhan

Hi,
Check all steps in this doc (Especially from Page 20 to 24): [https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/c0332b2a-eb97-2910-b6ba-dbe52a01be34|https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/c0332b2a-eb97-2910-b6ba-dbe52a01be34]
Thanks,
- Gujjeti.

Error in Directory Cache Update

Hi,
because we changed from two SLDs (PROD & DEV) to one (DEV) we did all changes like given in note 720717.
Everything seems to run fine except the Adapter Engine - ok parts of it.
When checking the Cache-Infos in Integration Directory we get following error in Integration Server (Central Adapter Engine). What do we need to do?!
br
com.sap.aii.ib.server.abapcache.CacheRefreshException: Unable to find an associated SLD element (source element: SAP_XIIntegrationDirectory, [CreationClassName, SAP_XIIntegrationDirectory, string, Name, directory.px1.sapru03, string], target element type: SAP_XIIntegrationServer)
 at com.sap.aii.ibdir.server.abapcache.content.CacheCPA.addContent(CacheCPA.java:483)
 at com.sap.aii.ibdir.server.abapcache.content.CacheCPA.addContent(CacheCPA.java:154)
 at com.sap.aii.ibdir.server.abapcache.CacheRefreshRequest.addContent(CacheRefreshRequest.java:388)
 at com.sap.aii.ibdir.server.abapcache.CacheRefreshRequest.addContent(CacheRefreshRequest.java:326)
 at com.sap.aii.ibdir.server.abapcache.CacheRefreshRequest.processHTTPRequest(CacheRefreshRequest.java:145)
 at com.sap.aii.ibdir.server.abapcache.CacheRefreshRequest.handleHTTPRequest(CacheRefreshRequest.java:103)
 at com.sap.aii.ibdir.web.abapcache.HmiMethod_CacheRefresh.process(HmiMethod_CacheRefresh.java:67)
 at com.sap.aii.utilxi.hmis.server.HmisServiceImpl.invokeMethod(HmisServiceImpl.java:169)
 at com.sap.aii.utilxi.hmis.server.HmisServer.process(HmisServer.java:178)
 at com.sap.aii.utilxi.hmis.sbeans.HmisBeanImpl.process(HmisBeanImpl.java:86)
 at com.sap.aii.utilxi.hmis.sbeans.HmisLocalLocalObjectImpl10.process(HmisLocalLocalObjectImpl10.java:259)
 at com.sap.aii.utilxi.hmis.web.HmisServletImpl.processRequestByHmiServer(HmisServletImpl.java:290)
 at com.sap.aii.utilxi.hmis.web.workers.HmisExternalClient.doWork(HmisExternalClient.java:75)
 at com.sap.aii.utilxi.hmis.web.HmisServletImpl.doWork(HmisServletImpl.java:496)
 at com.sap.aii.utilxi.hmis.web.HmisServletImpl.doPost(HmisServletImpl.java:634)
 at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
 at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
 at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:390)
 at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:264)
 at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:347)
 at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:325)
 at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:887)
 at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:241)
 at com.sap.engine.services.httpserver.server.Client.handle(Client.java:92)
 at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:148)
 at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
 at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
 at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
 at java.security.AccessController.doPrivileged(AccessController.java:207)
 at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
 at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)

Hi,
Hereu2019s a list of common errors/problems in SAP XI and their possible resolutions. This Guide will help you troubleshoot your integration scenarios in SAP XI/PI. This is in no way an exhaustive list. You can add your points/ideas to this list. Please feel free to post your inputs using the comments form at the end of this article.
Cache Update Problems
Use transaction SXI_CACHE to update the Integration Directory cache. Alternatively, you can use the following URLs to update the CPA cache. Use XIDIRUSER to refresh the cache.
For complete cache refresh - http://<hostname>:<port>/CPACache/refresh?mode=full
For delta cache refresh - http://<hostname>:<port>/CPACache/refresh?mode=delta
If this does not solve the issue, check transaction SLDCHECK to ensure that connection to SLD is available. If the connection fails, check the configuration in the transaction SLDAPICUST. Make sure that the password maintained is correct and the maintained service user is not locked.
Now in the Integration Repository go to Environment u2192 Clear SLD Data Cache. Also go to Integration Directoy and clear the cache using menu Environment u2192 Clear SLD Data Cache.
Open the XI Start Page and click on Administration. On the Repository tab, choose Cache Overview. Refresh the cache using the buttons/icons on the right. Use XIDIRUSER to refresh the cache. Carry out cache refresh in the same way on the Directory and Runtime tabs.
If you are facing cache update problems in your BPM (say you have modified the BPM, but when executed old version of the BPM is picked up instead of the new one), run the transaction SWF_XI_CUSTOMIZING and press F9 carry out automatic BPM/Workflow Customizing.
Routing Errors
NO_RECEIVER_CASE_BE or NO_RECEIVER_CASE_ASYNC
This means no receiver could be found. Check your Receiver Determination. Activate and update cache. Asysnchronous messages can be manually restarted.
TOO_MANY_RECEIVERS_CASE_BE
More than one receiver found. Check your ID configuration to ensure that there is exactly one receiver for the synchronous message. Multiple receivers for synchronous interfaces are not permitted.
Mapping Errors
JCO_COMMUNICATION_FAILURE
Check whether RFC destination AI_RUNTIME_JCOSERVER is correctly configured
NO_MAPPINGPROGRAM_FOUND
Ensure that mapping program exists and is activated. If it exists then update the cache.
EXCEPTION_DURING_EXECUTE
This error occurs due to erroneous XML formatting. Check your mapping program and ensure that you supply valid input data.
Messages stuck in queues
Check the queues using transactions SMQ1 (outbound)/SMQ2 (inbound). Resolve the displayed errors. You can cancel the messages from SXMB_MONI. Execute LUW if necessary and avoid deleting entries manually.
Conversion Errors
Unable to convert the sender service XXXX to an ALE logical system
This error occurs in case of scenarios with IDoc adapters. Whenever you use business systems, make sure that the corresponding logical system name is maintained in the SLD.
Open your business system in the Integration Directory. Switch to Change mode. Access the menu path Service u2192 Adapter Specific Identifiers. Click the button that says u2018Compare with System Landscape Directoryu2019 and chose Apply. Save and activate your change list.
In case of business services, you can manually type a logical system name in the Adapter Specific Identifiers if required. This name should match the corresponding logical system name defined in the partner SAP systemu2019s partner profiles.
Errors on the outbound side
Sometimes the link between SAP XI and the target system (say ERP) goes down and messages fail on the outbound side. It may not be possible to restart them from using RWB or the transactions like SXI_MONITOR/SXMB_MONI. In such cases, you can follow the procedure outlined in the following article - Dealing with errors on the outbound side.
Refer this article:
http://help.sap.com/saphelp_nwpi71/helpdata/en/0d/28e1c20a9d374cbb71875c5f89093b/content.htm
Refer this portal
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/ep/pointers%2bfor%2btroubleshooting%2bportal%2bruntime%2berrors
Regards,
Suryanarayana

Error 10218 while integrating scom 2012 r2 with scvmm 2012 r2

hello,
We are working to integrate the SCOM 2012 R2 With SCVMM 2012 R2 .But while creating connection of integration it got failed with error in job on scvmm as below :
Error (10218)
Setup could not import the System Center Virtual Machine Manager Management Pack into Operations Manager server because one or more required management packs are missing. The VMM Management Packs cannot be deployed unless the following component management
packs are present in Operations Manager :
Windows Server Internet Information Services 2003,
Windows Server 2008 Internet Information Services 7,
Windows Server Internet Information Services Library,
SQL Server Core Library.
Recommended Action
To provide the missing component management packs, ensure that the following management packs have been imported into Operations Manager server:
Microsoft Windows Server 2003 Internet Information Services Management Pack for OpsMgr 2012 (version 6.0.6278.0 or later)
Microsoft SQL Server 2005 Management Pack(version 6.0.5000.0 or later)
You can download the management packs from the System Center Operations Manager Catalog at http://go.microsoft.com/fwlink/?LinkId=86411
Reference link used :- http://technet.microsoft.com/en-us/library/hh882396.aspx ,We have imported all the required MPs as mention in above link on scom.
Regards
Richa KM

Have you imported all of the packs it mentions:
Windows Server Internet Information Services 2003,
Windows Server 2008 Internet Information Services 7,
Windows Server Internet Information Services Library,
SQL Server Core Library.
There's a good walkthrough
here which details all the pre-reqs.
It was some time ago but i also did a walk-through with pictures
http://myopsmgrblog.wordpress.com/2013/04/23/scom-integration-with-scvmm/
Hope this helps

Unable to log into Integration Directory / Repository

Hi, I can't log on to Integration Directory nor Repository with user PISUPER (which I could some days ago) and I get the error: "Authorization error; unknown user name or incorrect password".
I still CAN log in via the Easy Access with the same user/password.
Any ideas? Why cant I log on to java but not to ABAP?
Thanks in advance

Hi Hans,
1. Login into XI and use Tcode SU01 then enter the user name "PISUPER" and then press the lock/unlock button, if user will be locked u can unlock it and then u can try to login into xi. But if still it doesn't work then..
2. Tcode SU01, after entering the user name press the change/edit button, then come to logon data tab and give some pasword (some temp password e.g. pass123). Now press save button and just logout.
3. Now login into XI (ABAP not IR, ID) with user "PISUPER" and enter the password pass123, it will ask to change the password, change the password.
4. Now you logon to browser (portal) to login into IR & ID with changed (same password which you have entered in XI-ABAB) password.
Regards,
Sarvesh

Unable to open Integration directory

Hi,
I am trying to open Integration directory but getting an error. Its saying
"Unable to launch Integration Directory".
Can someone help?

Hi,
I am including a list of possible solutions. There could be many reasons to this problem so i am giving you all possible solutions.
I think you need to clera your JWS cache. to do this, just open your Java Web Start, go to FILE-->PREFERENCES >Advanced> and select the option CLEAR APPLICATION FOLDER.
or
I tried sldcheck transaction and found out that sld is not working .
When I go through system log user was locked which is used for sldaccess maintained in sldapicust transaction.
After unlocking same user , problem was resolved.
or
suggest you try installing j2sdk-1_4_2_09.
or
Go thru this blog Unable to open Integration Builderchecklist
https://www.sdn.sap.com/sdn/weblogs.sdn?blog=/pub/wlg/1688 [original link is broken] [original link is broken] [original link is broken]
or
Java Web Start
/people/sameer.shadab/blog/2005/11/27/java-web-start
Regards
joel

Integration directory is not getting displayed..

Hi Gurus,
Our developers are facing an issue here- they are not able to view the Integration Directory (ID) window with their own ID's as well as PISUPER. They are able to view the same instance ID from a different server. But I'm able to view to ID from my machine. When they key in their login credentials in the integration directory, after which a window will be opened and that they cannot see it.The process and the application keeps running in the windows task manager. Is this sort of a display problem or something?
Any thoughts would be appreciated!
Regards,
Sriram

Hi,
Also make sure they are have JDK1.5 and not any other version installed. Try to delete your temporary Java files on your PCs and do the re-initialization Raj mentioned, and try again. You can also enable Java console from control panel to see where you're getting stuck.
Regards,
Gökhan

SAPCAR returns with error 139

Hi, I'm installing the SAP R3SETUP version 4.6c and Sun 10 with Oracle as DB and my new issue is when I execute..
./R3SETUP -f CENTRAL.R3S
>> Extracting the Database-Dependent SAP system Executables
>>
>> MM-DD HH:MM:SS EXTRACTSAPEXE_IND_IND InternalInstallationDo:0
>> /<My installation directory>/SAPCAR returns with error 139.
In advance thank you.

Hi,
You can manually extract the SAPEXEDB.SAR ...
First copy .SAR (file you want to extract) and SAPCAR file in /sapmnt/SID/exe (in the kernel directory)
Then go to /sapmnt/SID/exe and give the following command
SAPCAR -xvf SAPEXEDB.SAR
if it fails at SAPCAR
then rename existing SAPCAR to SAPCAR1
then use the below command
SAPCAR1 -xvf SAPEXEDB.SAR
it will work...
Regards.
Rajesh Narkhede

Integration Directory, Cache Notifications with error

Similar Messages

Maybe you are looking for