Integration_Directory_HMI connection test is very slow

HI all
This RFC connection test is success by giveing 500 status code. But it is taking lot of time like 20Min.
Can some one suggest what is the problem. How can I tune it?

Yeah this was fixed. This is due to my application where we are using the file and JDBC adapters. in one of the sender JDBC we written long SQL query with union statement. Where it is going to infinite loop. Hence the JAVA engine is going to die.
So for this we went to offline config tool and stop the file and JDBC services and started the SAP again and now it is smooth and fine.
Regards,
Venkat

Similar Messages

INTEGRATION_DIRECTORY_HMI Connection test fails

Hi ,
I am trying to configure INTEGRATION_DIRECTORY_HMI but the connection test fails as user cannot be authenticated. I found out that I need to put user XIISUSER in the logon tab. Now problem for me is that I do not know the password for XIISUSER.
Then I tried to search the user XIISUSER in SU01. For my surprise it was not there.
Can anyone tell me the steps to create XIISUSER and what roles I need to assign and where I have to register this user.
Thanks.
Regards,
Rahul

Hi,
Try to use PIISUSER instead.Its default password is the master password that you can be given from the basis.
Regards
Yu Ming

WRT54G V8 wired connection recently got very slow. HELP!

Hello, I have a WRT54G V8.0 wireless router. I bought it about 3 months ago, and it was working just fine. But on the last coupe of days, the connection speed became really slow.
The setup is as follow: 2 PCs connected directly by wire, and one connected through the wireless connection. All three of them use Windows XP.
I connected the modem directly to one of the PCs and speed improves a lot. Then I connected only that PC through the router (disabling the wireless connection) and speed goes down again, so I'm pretty sure it's the router.
I did some testing using the speedtest.net website and, with the modem directly connected to the PC, I get 1024 Kbps (my connection) all around the world, but with the router on, connection speed drops to 200-400 Kbps depending on how far the test server is located. I already had the latest firmware upgrade (8.0.0.5) and I've reseted the router back to factory settings, but speed still really slow.
I'm not using any firewall on neither of the PCs, except for Windows XP default firewall.
Any ideas?
Thanks in advance
Solved!
Go to Solution.

As you have tried all the possible settings on your router to improve the speed. I think it could be the problem with the router's firmware. May be your can do is, Re-Flash the firmware on your router, once the firmware is upgraded Press and hold the reset button for 1 minute...Release the reset button...Unplug the power cable from your router, wait for 1 minute and re-connect the power cable...Now re-configure your router...

Wifi connection become's very slow on my laptop

Hi guys... So, recently I had bought my new laptop and from the first day I have noticed that the internet on it is very very slow (wifi connection). AT FIRST I thought that there is some thing wrong with my router but after 2 hours I changed my mind because the Internet speed on my mobile (which connected in the same network and router) is more fast than it on my laptop , and it is also very fast on my old laptop (pavilion i5/win7).
As I have mentioned before I had bought this one recently so it's pure.. I didn't touch it is drivers or it's software just like stock.
I also need to to say that sometimes the wifi connection on my laptop becomes fine and quite fast and in sometimes becomes slow, the interesting part is that when it becomes slow I restart my laptop and it becomes fast again!! I can't find find where is the error in, hardware or software I have no idea
Hope u could help..
Thanks in advance ^^

fixed with this method:
http://bbs.archlinux.org/viewtopic.php?pid=319710

Printing to Airport Express connected Laserjet 1012 very slow after update to 10.6.8

After updating a pair of computers that we have here to 10.6.8, printing to our Airport Express connected HP LaserJet 1012 has become incredibly slow. I timed it and it is taking 2:30 to print a blank page, whereas printing the same blank page under 10.6.7 (on an external drive connected to the same MacBook Pro) happens within 2 seconds. One thing that I have noticed is that when I bring up the HP Printer Queue the computer says 'connecting to printer' for 20 - 30 seconds, then sits at 50% complete on the printing for some time - anyone else running into similar problems?

Because I am not experiencing the same issue I have not needed to apply the CNET article. But just to be clear, did you follow the instructions to the letter?
If you did and it's still not working then you can begin narrowing down where the problem is by following some basic trouble shooting steps. First thing I'd try is creating a new user account (call it TEST ACCOUNT) and leave it alone, then try printing from that account. If it works then you know it's a software issue in your normal user account. If it still doesn't work then what I'd do is:
1. Download 10.6.8 Combo Update at http://support.apple.com/kb/DL1399
2. Disconnect all peripherals (including the printer)
3. Backup using both Time Machine and/or a Bootable Clone using SuperDuper or Carbon Copy Cloner
4. Restart from the Bootable Clone or the Snow Leopard install discs.
     a) choose language
     b) Click Utililities Menu
     c) Disk Utility
     d) highlight the internal HD and the First Aid tab
     e) Repair Disk Permissions, Verify Disk & Repair Disk.
     f) exit Disk Utility and restart in Safe Mode
5. Install the Combo Update
6. Restart normally and test the system
7. Begin connecting peripherals one by one and testing each.

Help!! Flash CS3 and CS4 "Test Movie" very slow on OS X

This is a problem that, having read many forums, affects a
very large amount of people, though Adobe doesn't care at all. It
only affects OS X users. I know that it has been addressed many
times in different forums, but I never actually stumbled across
anyone having found a solution.
When I use Flash CS3, and I make any animation, even the
simplest tween, and I preview it with Test Movie, the result I get
is an extremely slow playback. Something like half the FPS it
should be.
However, when I export the SWF and preview it in the external
Flash Player or in a browser, it's just fine and fast.
Another interesting thing is that in CS3, when I open the
Help panel, the problem with Test Movie only happens like 20% of
the time. In that case, it only gets solved if I restart or Log Out
at least. I have no idea why the Help panel being open solves the
problem, this only shows that this is probably a little graphic
user interface bug, or something similar, that could be solved very
very easily.
In Flash CS4, there is no Help panel, so there is no solution
to the problem.
It would be nice to be able to press Cmd + Enter to see the
movie, and not have to do File > Export > bla bla bla, open
Finder, Find the SWF, double click it, wait for the browser to
open... etc...
I have a brand new 2.5 GHz MacBook Pro, and Test Movie runs
faster on my 900MHz Pentium III PC!! Funny...
Here are some links I found about this problem:
http://bugs.adobe.com/jira/browse/FP-878
http://kb.adobe.com/selfservice/viewContent.do?externalId=kb407896
http://www.kirupa.com/forum/archive/index.php/t-258991.html
This is quite ridiculous, and on Adobe's Support page, the
solution is "Do not use Test Movie."
And the funny thing is that they didn't even bother to fix
this in CS4...
So basically if something doesn't work, Adobe's solution is
"Don't use it."
I guess they're right!
Please, tell me if anyone has or does not have this problem
or knows anything about it!
Thanks,
Mate

This is a problem that, having read many forums, affects a
very large amount of people, though Adobe doesn't care at all. It
only affects OS X users. I know that it has been addressed many
times in different forums, but I never actually stumbled across
anyone having found a solution.
When I use Flash CS3, and I make any animation, even the
simplest tween, and I preview it with Test Movie, the result I get
is an extremely slow playback. Something like half the FPS it
should be.
However, when I export the SWF and preview it in the external
Flash Player or in a browser, it's just fine and fast.
Another interesting thing is that in CS3, when I open the
Help panel, the problem with Test Movie only happens like 20% of
the time. In that case, it only gets solved if I restart or Log Out
at least. I have no idea why the Help panel being open solves the
problem, this only shows that this is probably a little graphic
user interface bug, or something similar, that could be solved very
very easily.
In Flash CS4, there is no Help panel, so there is no solution
to the problem.
It would be nice to be able to press Cmd + Enter to see the
movie, and not have to do File > Export > bla bla bla, open
Finder, Find the SWF, double click it, wait for the browser to
open... etc...
I have a brand new 2.5 GHz MacBook Pro, and Test Movie runs
faster on my 900MHz Pentium III PC!! Funny...
Here are some links I found about this problem:
http://bugs.adobe.com/jira/browse/FP-878
http://kb.adobe.com/selfservice/viewContent.do?externalId=kb407896
http://www.kirupa.com/forum/archive/index.php/t-258991.html
This is quite ridiculous, and on Adobe's Support page, the
solution is "Do not use Test Movie."
And the funny thing is that they didn't even bother to fix
this in CS4...
So basically if something doesn't work, Adobe's solution is
"Don't use it."
I guess they're right!
Please, tell me if anyone has or does not have this problem
or knows anything about it!
Thanks,
Mate

Oracle 11g database Connection & Response are very slow

I have an ORACLE 11g R2 on lRed Hat Enterprise Linux Server release 5.3 (Tikanga).
initially it was working fine.
Now a days while attempting to connect into the database from network using @service_name
it takes a lot of time to establish the connection and even it gets connected the query response time is very high.
on the other hand if I connect from the native database machine's terminal without @service_name it works fine & the response time is convincing. But even from the native database machine's terminal with @service_name it is giving me the same pain.
can any body help me how to fix this.
Thanks in advance..
Arkesh

thanks for the reply & Query
Alert Log entry do look like this
ORACLE_BASE from environment = /u01/app/oracle
Thu Apr 22 07:29:10 2010
ALTER DATABASE MOUNT
Successful mount of redo thread 1, with mount id 4283520006
Database mounted in Exclusive Mode
Lost write protection disabled
Completed: ALTER DATABASE MOUNT
Thu Apr 22 07:29:15 2010
ALTER DATABASE OPEN
Beginning crash recovery of 1 threads
parallel recovery started with 7 processes
Started redo scan
Completed redo scan
read 15 KB redo, 23 data blocks need recovery
Started redo application at
Thread 1: logseq 449, block 8217
Recovery of Online Redo Log: Thread 1 Group 2 Seq 449 Reading mem 0
Mem# 0: /u01/app/oracle/oradata/ultimus/redo02.log
Completed redo application of 0.01MB
Completed crash recovery at
Thread 1: logseq 449, block 8248, scn 10502937
23 data blocks read, 23 data blocks written, 15 redo k-bytes read
Thread 1 advanced to log sequence 450 (thread open)
Thread 1 opened at log sequence 450
Current log# 3 seq# 450 mem# 0: /u01/app/oracle/oradata/ultimus/redo03.log
Successful open of redo thread 1
MTTR advisory is disabled because FAST_START_MTTR_TARGET is not set
SMON: enabling cache recovery
Successfully onlined Undo Tablespace 2.
Verifying file header compatibility for 11g tablespace encryption..
Verifying 11g file header compatibility for tablespace encryption completed
SMON: enabling tx recovery
Database Characterset is WE8MSWIN1252
No Resource Manager plan active
replication_dependency_tracking turned off (no async multimaster replication found)
Starting background process QMNC
Thu Apr 22 07:29:18 2010
QMNC started with pid=27, OS id=3611
Completed: ALTER DATABASE OPEN
Thu Apr 22 07:29:20 2010
db_recovery_file_dest_size of 10240 MB is 0.00% used. This is a
user-specified limit on the amount of space that will be used by this
database for recovery-related files, and does not reflect the amount of
space available in the underlying filesystem or ASM diskgroup.
Thu Apr 22 07:29:20 2010
Starting background process CJQ0
Thu Apr 22 07:29:20 2010
CJQ0 started with pid=28, OS id=3817
Thu Apr 22 07:34:18 2010
Starting background process SMCO
Thu Apr 22 07:34:18 2010
SMCO started with pid=19, OS id=3861
Thu Apr 22 07:59:23 2010
Thread 1 advanced to log sequence 451 (LGWR switch)
Current log# 1 seq# 451 mem# 0: /u01/app/oracle/oradata/ultimus/redo01.log
Thu Apr 22 10:09:23 2010
DM00 started with pid=34, OS id=6272, job ULTIMUS.SYS_EXPORT_SCHEMA_01
Thu Apr 22 10:09:25 2010
DW00 started with pid=35, OS id=6274, wid=1, job ULTIMUS.SYS_EXPORT_SCHEMA_01
Thu Apr 22 10:11:20 2010
Thread 1 cannot allocate new log, sequence 452
Private strand flush not complete
Current log# 1 seq# 451 mem# 0: /u01/app/oracle/oradata/ultimus/redo01.log
Thread 1 advanced to log sequence 452 (LGWR switch)
Current log# 2 seq# 452 mem# 0: /u01/app/oracle/oradata/ultimus/redo02.log
Thu Apr 22 10:13:28 2010
DM00 started with pid=45, OS id=6395, job ULTIMUSISL.SYS_EXPORT_SCHEMA_01
Thu Apr 22 10:13:29 2010
DW00 started with pid=46, OS id=6397, wid=1, job ULTIMUSISL.SYS_EXPORT_SCHEMA_01
Thu Apr 22 10:14:29 2010
Thread 1 cannot allocate new log, sequence 453
Private strand flush not complete
Current log# 2 seq# 452 mem# 0: /u01/app/oracle/oradata/ultimus/redo02.log
Thread 1 advanced to log sequence 453 (LGWR switch)
Current log# 3 seq# 453 mem# 0: /u01/app/oracle/oradata/ultimus/redo03.log
Thu Apr 22 10:15:40 2010
DM00 started with pid=43, OS id=6432, job IULTIMUS.SYS_EXPORT_SCHEMA_01
Thu Apr 22 10:15:41 2010
DW00 started with pid=45, OS id=6434, wid=1, job IULTIMUS.SYS_EXPORT_SCHEMA_01
Thu Apr 22 10:16:38 2010
DM00 started with pid=45, OS id=6450, job ULTIMUSEXT.SYS_EXPORT_SCHEMA_01
Thu Apr 22 10:16:38 2010
DW00 started with pid=46, OS id=6452, wid=1, job ULTIMUSEXT.SYS_EXPORT_SCHEMA_01
Thu Apr 22 10:26:18 2010
Fatal NI connect error 12537, connecting to:
(LOCAL=NO)
VERSION INFORMATION:
     TNS for Linux: Version 11.2.0.1.0 - Production
     Oracle Bequeath NT Protocol Adapter for Linux: Version 11.2.0.1.0 - Production
     TCP/IP NT Protocol Adapter for Linux: Version 11.2.0.1.0 - Production
Time: 22-APR-2010 10:26:18
Tracing not turned on.
Tns error struct:
ns main err code: 12537
TNS-12537: TNS:connection closed
ns secondary err code: 12560
nt main err code: 0
nt secondary err code: 0
nt OS err code: 0
opiodr aborting process unknown ospid (6587) as a result of ORA-609

4s trouble with wifi. it connects however is very slow then switches back to 3g

If anyone out there could help I would appreciate it!
iphone 4s brought as a replacement form Apple on the 6 September 2013 has developed an issue!
I can connect to my home BT HomeSpot however its so slow and will then go back to 3g, so frustrating! I have a BT Booster and the single is strong, we have no problem with any of our other devices.
i've been to the Apple store twice now and they've said there is nothing wrong with the device as it works on there wifi!
Can anyone help?

I have brought the Virgin Media super hub back to the manufacturing original configuration then changed the user name and password. Only my iphone was connected. Then I've switched to 5 Ghz = 30Mbpm BANG!; went back to 2.4Ghz=dead. Now is getting worst. At the beginning it was picking at least 2Mbpm. Then 1. Then 0.something. Now it doesn't even connect. I'm pretty sure the iphone 5 must have 2 antennas and the one that uses 2.4Ghz is just gone.
Any advice?

Connection creation is very slow in SJSAS

Hi All,
I am have deployed an CMP application and created a connection pool & datasource for Oracle Database (Non-XADatasource).
When i specify the connection pool min-size as 10 and max-size as 20, the application is responding fast.
But if i increase the pool size ( min=60 & max=70 ), the application takes time to respond.
Sun one app server is taking very long time approx- 15min to create 60 connections.
Any idea or I am missing something...
very urgent,
thanks,
Bobby.

Have you ruled out performance bottlenecks on the server itself? If you are memory starved, your performance will drop off a cliff. Check your available physical memory.
-Ian Evans

Time Capsule suddenly producing very slow internet connection

I use my TC as a router and back-up. The internet connection is suddenly very slow and unable to load some more complex web pages. I plugged the cable modem directly into my MacBook Pro and the connection is fine, so I do not believe it is our signal from the internet provider. Yesterday I was unable to locate my TC back-up files on my computer, but today I could.

thomsenbrønshøj wrote:
Same scenario. firmware 7.7.3. Drops from 8Mbit direct to 0,2Mbit through the Time Capsule (latest version 2TB).
Have a try naming the two wireless bands differently.
ie TC24ghz and TC5ghz .. then force the Sonos to use 2.4ghz and force the computer to use 5ghz.. do you get any improvement??
If not the TC could be faulty on the wan side.. to test you need to do actual file transfer tests between the client and the TC.. copy a large file to the and from the TC hard disk.. it should go at up to 50MB/s over ethernet and around 10-15MB/s over wireless.
The WAN issue with some modems is difficult to track down.. if the TC is new return it.. or still in warranty at least get apple to test it.

Wireless Internet connection very slow

The wireless connection has gotten very slow. I have restarted the modem but that has not improved the connection. I am about to restart the TC and see if that improves the connection. What is the best way to shut the TC down and restart it? The only way I know is to unplug for 15 seconds and then put the plug back in.
Thanks

Try the following ...
o Power-down the modem, Time Capsule (TC), and computer(s); wait at least 10-15 minutes. Order is not critical.
o Power-on the modem; wait at least 10-15 minutes.
o Plug-in the TC; wait at least 5-10 minutes.
o Power-on the computer(s).

Very slow 802.11n. 20" iMac, Vista, Broadcom, Belkin N1

I've been trying to get some drivers working with Windows Vista. I'll post the results I've been having and maybe someone can assist.
I have a 20" brand new iMac with Leopard running bootcamp windows vista ultimate. When I connect to a Belkin Pre-N wireless router I get 802.11g wireless speeds(expected) of about 36mb/s (it's a good distance away, 2 bars).
I have another wireless router Belkin N1 wireless and I get differing wireless speeds/connectivity depending on what drivers I use. I have 5 full bars and an "excellent" connection rating for it.
I understand that the specifications for 802.11n that both belkin and apple use are based on draft specifications and may not be compatible.
The drivers on the leopard disk are marked as 4.80.75.0. I can connect using those and use the internet. But at very, very slow speeds (27.0 mb/s Broadband tests show .5% of normal speeds for my provider, a wired connection will get 105.8% of normal speeds for my provider.)
I got some other drivers that were posted by other users at the following location
(http://www.versiontracker.com/php/dlpage.php?id=115683&db=win&pid=149836&kind=&l nk=ftp%3A%2F%2Fftp.support.acer-euro.com%2Fnotebook%2Ftravelmate_2480%2Fvista%2F Drivers%2F802.11b%2BgBroadcom+Wireless+Lan+Driver4.102.15.61.zip)
Those drivers are marked as 4.102.15.61. It will connect 1 out of 7 tries at 270mb/s but will disconnect after a few seconds.
There are some other drivers posted by another user at the following location:
http://discussions.apple.com/thread.jspa?threadID=1309942&tstart=0
These are marked as 4.150.31.0. Same issue as the ones on the leopard disk. I get connectivity, but at very slow speeds.
I believe I have the most up to date firmware for my router but will check that and post on the message board some results. Another option that I have is to completely disable the 802.11n protocol on the router and just use 802.11g.
Does anyone know any other drivers out there that I could try? I will post findings. Again this is only a problem while trying to connect to a Belkin N1 wireless router. I get much better speeds/connection using a Belkin Pre-N router.

I have a 24" Core 2 Duo iMac (2.4 GHz, 4 GB RAM) running Leopard and an Apple Airport Extreme base station, and am having the same problem with slow wireless speed under Vista Ultimate edition with Boot Camp. All Vista software updates as of March 11, 2008 have been applied.
I've reinstalled the driver from the Leopard disk (no effect) and updated the driver directly in Windows, using the one that Windows detects automatically (no effect). Under OS X, I get close to optimal bandwidth over the 802.11n connection to my cable modem. The Airport Extreme is set to use 5 GHz only and does not use the 802.11g-compatibility mode.
When I use a wired connection to my gigabit Ethernet switch, everything is fine.
Message was edited by: jeffkirk

Broadband is very slow and unusable!

For the last 2 nights running my connection is running very slow to the piont the BBC website or a youtube video fails to load. Ps3 gaming is impossible! Have rung BT India and gone though all they do with resets and whatnots and still stuck at square one wih no improvement.
My connection is option 3, 20mb home broadband and have been with BT broadband for 7 years with good service.
My stats below.
Line Mode
ADSL2+
Line State
Show Time
Line Power State
L0
Line Up Time
01:02:07:06
Line Coding
Trellis On
Line Up Count
1
Statistics
Downstream
Upstream
Line Rate
11421 Kbps
1069 Kbps
Noise Margin
3.1 dB
6.8 dB
Line Attenuation
42.5 dB
21.3 dB
Output Power
0.0 dBm
13.0 dBm
These above have been these figures for the last 12 months and have had no problems at all.
Speedtester refuses to test my speed saying there is an error at this time but using other speedtesters im only getting between 150-200kb download speed but getting my normal 902kb upload. Usually my speed is always about 9000-10000kb.
Is there a problem in the 0208 Essex area as two of my friends withing a mile away have the same broadband package as me also have the same speed problem??
Solved!
Go to Solution.

Hi there have been service outages and degraded service issusein London and the south east today I would suggest reseting your hub tomorrow morning and recheck the Bt speedtest and then posting the results back here we can then offer further advice
If you want to say thanks for a helpful answer,please click on the Ratings star on the left-hand side If the reply answers your question then please mark as ’Mark as Accepted Solution’

Internet conection very slow after upgrading to Leopard

Hi
after installing Leopard, my internet connection is often very slow. Opening a new website needs a much longer time as before upgading. Sometimes it works as fast as before and sometimes it just can not find the server.
Have you recognized similiar problems after upgrading and have any hints or is it only related to the internet connection/provider?
Thanks

First check to see if Spotlight is still indexing. Then go to
Applications/Safari and Control Click on the Safari icon and scroll to Get Info, make sure the Open Using Rosetta box is not checked. You can also go to Safari/Preferences and Reset safari, after Importing your bookmarks to reinstall later.
Did you use Migration from a PPC Mac to your Intel? How are the other Apps running?
Joe

WRT54G very SLOW Wireless

All-
I hope someone can help me with this problem. I have a WRT54G v8 router and a PC with Vista. My ISP is Comcast, and I am paying for 12 Mbps. When I plug my computer directly into the modem or router I get speeds usually about 6 Mbps, sometimes up to 8 or 10 Mbps. However, when I connect to the internet through my wireless connection it is VERY SLOW. The connection is only about 200-400 Kbps. I have all ready spoken to one of the technicians at Linksys. They advised me to change the following settings:
On the setup tab, Make MTU "Manual" and size 1365.
On the Wireless tab, set to Channel 11.
On the advanced wireless settings, set Beacon Interval 50 and Fragmentation Threshold and DTIM Interval to 2304.
In the Security Tab, uncheck "Block Anonymous Internet Requests" box.
I made these changes, but my connection is still very slow (380 Kbps).
Help!
Thanks!

As you have already made the changes on your router, and still its not working. Have you tried upgradeing the firmware of your router? If not then you can Go to website linksysbycisco.com/downloads.........insert model no of your router in serach tab......select proper version of your router........download the firmware file......save that file on desktop.
Follow these steps to upgrade the firmware on the device : -
Open an Internet Explorer browser page on a computer hard wired to the router...
In the address bar type - 192.168.1.1...Leave the username blank & in password use admin in lower case...
Click on the 'Administration' tab- Then click on the 'Firmware Upgrade' sub tab- Here click on 'Browse' and browse the .bin firmware file and click on "Upgrade"...Wait for few seconds until it shows that "Upgrade is successful" After the firmware upgrade, click on "Reboot" and you will be returned back to the same page OR it will say "Page cannot be displayed".
Now reset your router : Press and hold the reset button for 30 seconds...Release the reset button...Unplug the power cable from your router, wait for 30 seconds and re-connect the power cable...Now re-configure your router...
Once you configure all the settings on your router, Below are the wireless settings which you can change on your router.
Open an Internet Explorer browser page on your wired computer(desktop).In the address bar type - 192.168.1.1
Leave username blank & in password use admin in lower case...
For Wireless Settings, please do the following : -
Click on the Wireless tab
-Here select manual configuration...Wireless Network mode should be mixed...
-Provide a unique name in the Wireless Network Name (SSID) box in order to differentiate your network from your neighbours network...
- Set the Wireless channel to 11-2.462GHz...Wireless SSID broadcast should be Enabled and then click on Save Settings...
Please make a note of Wireless Network Name (SSID) as this is the Network Identifier...
For Wireless Security : -
Click on the Sub tab under Wireless > Wireless Security...
Change the Wireless security mode to WEP, Encryption should be 64 bits.Leave the passphrase blank, don't type in anything...Under WEP Key 1 type in any 10 numbers please(numbers only and no letters eg: your 10 digit phone number) and click on save settings...Please make a note of WEP Key 1 as this is the Security Key for the Wireless Network...
Click on Advanced Wireless Settings
Change the Beacon Interval to 75 >>Change the Fragmentation Threshold to 2304, Change the RTS Threshold to 2304 >>Click on "Save Settings"...
Now see if you can locate your Wireless Network and attempt to connect...

Integration_Directory_HMI connection test is very slow

Similar Messages

Maybe you are looking for