INTEGRATION_DIRECTORY_HMI test connection
on SM59, INTEGRATION_DIRECTORY_HMI,
when i tried to test connection,
always WINDOW POP UP to input ID and password
otherwise, SXI_CACHE, same issue happened
but, after type XIISUSER and password, it goes ok
as up-to-date green icon
does anyone know to eliminate logon pop up window?
and according to post-installation guide,
500 errror come up is normal when test connectoin on INTEGRATION_DIRECTORY_HMI, is it ok?
thasks in advance
This is a old trick, except after entering the description and RFC Dest type, do not press ENTER button at all.
This trick was mentioned by one of our members a year ago.
regards
Shravan
Similar Messages
-
INTEGRATION_DIRECTORY_HMI: Test failed
Hi! ALL
We have installed PI 7.1 and were going over our check list to make sure installation is complete and system is ready..
However, going over the standard check list we found that the following RFC connection failed:
INTEGRATION_DIRECTORY_HMI : When we clicked test connection; it had the Status Text as "Internal Server Error"
However, our messages are flowing fine thru PI ...
Would like to know where the INTEGRATION_DIRECTORY_HMI is used; as it seems to have an error when tested...but, we haven't seen any problems in terms of message flow through PI.
Please, let us know the purpose/functionality of INTEGRATION_DIRECTORY_HMI and how we can fix this error.
Thank you,
RituHi
That indicates everything is OK
check this guide, page 15 and 16
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/1a69ea11-0d01-0010-fa80-b47a79301290
Regards
Vishnu -
BaseFileName cannot be nothing or an empty String during Test Connection
Dear All,
I have FDM+Foundation+HSF 11.1.2 installed
I have stacked with the following problem:
when I try to Test Connection (Authentication Provider Window) during Load Balance Configuration I am getting
+“BaseFileName cannot be nothing or an empty String+
Parameter name: value”
Can somebody help me with it?
Best Regards,
Siarheisame error i faced, i restarted the APP server and it worked then.
-
Error while Test Connection with Connector
hi all:
there is an error while Test Connection with Connector , I also test it through sys administration->sys configuration->
suport -> sap transaction, I got all errors, I put these two errors as folows, could you please tell me how to sovle it
***************ERROR 1 while *error while Test Connection with Connector ******************************************************
Test Details:
The test consists of the following steps:
1. Retrieve the default alias of the system
2. Check the connection to the backend application using the connector defined in this
system object
Results
Retrieval of default alias successful
Connection failed. Make sure that Single Sign-On is configured correctly
************error sys administration->sys configuration-> suport -> sap transaction ********************** 1.5 #0025B3E02892006100000A0800001798000487530FB0122E#1274690722265#com.sap.portal.prt.runtime#sap.com/irj#com.sap.portal.prt
.runtime#guodongdong#47472##n/a##690347f0670e11df98cc0025b3e02892#SAPEngine_Application_Thread[impl:3]
9##0#0#Error##Java###04:4524/05/10_0077_6087550
[EXCEPTION]
#1#com.sapportals.portal.prt.runtime.PortalRuntimeException: Exception in SAP Application Integrator occured: Application URL
&\#39;:///sap(ZT1KVXBWektldldTeV9QQXBXRjNaWTRBLS1OZmRvZzBRWWY2QmN0WThNUmgqdUlRLS0=)/bc/gui/sap/its/webgui&\#39; is not valid!
Please check the protocol and host entries for system &\#39;sapdev&\#39;.
at com.sapportals.portal.appintegrator.AbstractIntegratorComponent.doContentPass
(AbstractIntegratorComponent.java:123)
at com.sapportals.portal.appintegrator.AbstractIntegratorComponent.doContent(AbstractIntegratorComponent.java:98)
at com.sapportals.portal.prt.component.AbstractPortalComponent.serviceDeprecated(AbstractPortalComponent.java:209)
at com.sapportals.portal.prt.component.AbstractPortalComponent.service(AbstractPortalComponent.java:114)
at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:328)
at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:136)
at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:189)
at com.sapportals.portal.prt.component.PortalComponentResponse.include(PortalComponentResponse.java:215)
at com.sapportals.portal.prt.pom.PortalNode.service(PortalNode.java:645)
at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:328)
at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:136)
at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:189)
at com.sapportals.portal.prt.core.PortalRequestManager.runRequestCycle(PortalRequestManager.java:753)
at com.sapportals.portal.prt.connection.ServletConnection.handleRequest(ServletConnection.java:240)
at com.sapportals.portal.prt.dispatcher.Dispatcher$doService.run(Dispatcher.java:523)
at java.security.AccessController.doPrivileged(Native Method)
at com.sapportals.portal.prt.dispatcher.Dispatcher.service(Dispatcher.java:412)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sap.engine.services.servlets_jsp.server.servlet.InvokerServlet.service(InvokerServlet.java:156)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039)
at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process
(ApplicationSessionMessageListener.java:33)
at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
at java.security.AccessController.doPrivileged(Native Method)
at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:104)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:176)Hi,
As per this part of the trace:
Exception in SAP Application Integrator occured: Application URL &\#39;:///sap(ZT1KVXBWektldldTeV9QQXBXRjNaWTRBLS1OZmRvZzBRWWY2QmN0WThNUmgqdUlRLS0=)/bc/gui/sap/its/webgui&\#39; is not valid! Please check the protocol and host entries for system &\#39;sapdev&\#39;. at ...
You can clearly see that the system object 'sapdev' is not configured correctly/at all - you are trying to launch transaction iView
(WEBGUI) and in order to do so you should configure the 'internet transaction server' category of the system object
with the hostname of the ITS server.
Generally the template is
<System.Access.ITS.protocol>://<System.Access.ITS.hostname>/sap<ESID>/bc/gui/sap/its/webgui?\....
So that's why you got
Please check the protocol and host entries for system .. -
Trying to modify a script to use test-connections in multiple domains?
Hey Scripting Guy!
I've created the script (below) to use test-connection against a list of hosts and write the results of the machines that respond to a .txt file. The only issue is that one of my sites utilizes two separate domains, does anyone have any advice as far as
when a test connection fails, retrying the command using another domain name? (server.domain.com)
I'll take any advice at this point... Thanks!
New-PSDrive -Name S -PSProvider FileSystem -Root \\server\share -ErrorAction SilentlyContinue
Get-ChildItem "S:\Folder1\Folder2\backup\backup Audits\Host Audits" -Filter *.txt | `
Foreach-Object{
$content = Get-Content $_.FullName
#$SiteName = Get-ChildItem "S:\Folder1\Folder2\backup\backup Audits\Host Audits"
#Find alive machines, and write their hostnames to output file for auditing
Test-Connection -count 5 -ErrorAction SilentlyContinue $Content | Select-object -unique | Out-File "S:\Folder1\Folder2\backup\backup Audits\Audit results by Site\$_"what i would like to do is when my test-connection fails with an error, append another domain suffix to the hostname so that if:
test-connection computerxyz fails
then test-connection computerxyz.domain.corp.com
$server="$computer.domain1.com"
if(Test-Connection $server -count 1 -quiet){
$server="$computer.domain2.com"
... other code
¯\_(ツ)_/¯ -
I've had an iWeb site running for 4 months and I publish a monthly newsletter. Since August I've been unable to republish. The test connection under FTP settings works but I get an error message when I try to upload newsletter. Am I missing something?
Where are you hosting the site a what are you using to upload the site files to the server?
OT -
Error in Test Connection - Content Repository does not exist
Hi, I have created a content repository which points to our own external HTTP content server which is a DMS through transaction OAC0.
In transaction CSADMIN I can see our server's status as running, still it shows yellow icon "customizing missing" in CSADMIN and in transaction OAC0 whenver I click "Test Connection" it gives the message" Content Repository does not exist". CMS 106.
Kindly help.
Regards
NehaHi,
We are using OACO as follows:
Choose Tools ® Business documents, Environment ® Knowledge Provider® KPro® Content Repositories
Enter the following fields in the u201CChange Content Repositories : Detailu201D :-
1) Content Rep. :- ZO (Content Repository Name)
2) Description :- Content Repository
3) Storage type :- HTTP content server.
4) Version no :- 0045
5) HTTP svr:p :- IP or machine name of application server on which DMS has been deployed : Web port of the application server on which DMS has been deployed.
1) Program :- sap/sapDocView.jsp
Save the created Content Repository by clicking on u201CSaveu201D. We are working on SAP 4.7 versionon a SAP development server and the content repository has not been transported after creation. Will not transporting be causing this error ?
Please reward points
Thanks
Vikranth -
Test Connection failed in Crystal Reports for Eclipse using SQL Server 2008
I installed an SQL Server Express 2008 on my local PC (Window XP SP3). I downloaded sqljdbc4.jar to Crystal Reports for Eclipse
IDE library path and tried to Test Connection, but got the Ping failed message : The TCP/IP connection to the host localhost, port 1433 has failed. It said that check that an instance of SQL Server is running on the host (I saw SQL Server SQLEXPRESS is Running on my PC) and accepting TCP/IP connection at the port (I enabled TCP/IPin my PC's SQL Server Network Configuration),
and that no firewall is blocking TCP connection to the port(I turned OFF Window Firewall on my OC). Can anyone tell me how can I fix this problem ?Hi,
Check the below thread also:
http://scn.sap.com/thread/1634856
Thanks,
DJ -
Hi there,
I am having a serious issue with The Power BI Data Management Gateway which I am hoping that someone can help me with.
Basically I am setting a connection between a Power BI demo site and a SQL 2012 Database based on Azure. The Data Management Gateway and is up and running, and Power BI has managed to connect to it successfuly.
By following the tutorials at
here I was able to successful create my Data Connection Gateway with a self-signed certificate.
However, when trying to create the data source I come into problems. The Data Source Manager manages to successfully resolve the hostname, as per the screenshot below:
Bear in mind that I exposed the require ports in Azure as endpoints and I managed to modify my hosts file on my local machine so I could access the SQL server hosted in Azure using its internal name -- otherwise I would not be able to get this far.
However the creation of the data source also fails when trying to created it whilst logged in the SQL server in question:
The Data Source Manager returns the error when using the Microsoft OLE DB Provider for SQL Server:
Failed to test connection. [DBNETLIB][ConnectionOpen (Connect()).]SQL Server does not exist or access denied
I tried using the SQL Server Native Client 11.0 instead but I also get an error. This time the error is:
Failed to test connection. Login timeout expiredA network-related or instance-specific error has occurred while establishing a connection to SQL Server. Server is not found or not accessible. Check if instance name is correct and if SQL Server is configured to allow remote connections. For more information see SQL Server Books Online.Named Pipes Provider: Could not open a connection to SQL Server [53].
Some considerations
If I provide an invalid username/password, the Data Source Manager does say that the username and password is incorrect.
Firewall is turned off in the SQL Server (either way, this error also happens if I try top use the Data Source Manager whilst logged in the SQL Server itself).
SQL Profiler does not show any attempt of connection.
The SQL server instance in question is the default one.
The error happens regardless if I select the option to encrypt connection or not.
In SQL Configuration manager I can see that all protocols are enabled (TCP/IP, Named Pipes and Shared Memory.
The Event Viewer does not provide any further errors than the one I have copied in this post.
I'm at a loss here. Could someone please advise what might I be doing wrong?
Regards,
P.Here is what I had to do to solve this issue:
Basically I had to add the MSSQL TCP/IP port as an end-point in Azure. After I did that, then I was able to create the data-source. However, I was only able to authenticate with a SQL account, as any domain account would return me an error saying that the
domain isn't trusted.
What puzzles me here is how come the Data Source Manager would inform me that an account username/password was invalid, but it would fail/timeout if I provided valid credentials (!?!?!!?) -
I'm trying to sign in on my itunes account but windows error come's up saying test connection any ideas.....
Make sure you have the right version...
Camera Raw plug-in | Supported cameras
Camera Raw-compatible Adobe applications -
Error in Test Connection of Content Repositories
Hello All,
I m creating a Content Repositories via Trnaction OAC0.
But, when i click on "TEST Connection" icon for testing the Connection, its giving the error " HTTP ERROR : 400 BAD REQUEST".
I have checked, all my entries while creating Content Repository are Correct.
My Dcument type is Document Management System(DMS) and
Storage Type is HTTP Content Server.
Please Help.
Thanks,
DeepakHello,
Test Page of Content Server is working fine.I have already done the URL Check for Content Server.
Below are the details of my dev_http trace.
<Date time>
[5956] sccsid: @(#) $Id: //bas/710_REL/src/krn/ftp/http.c#16 $ SAP
[5956] Environment SAP_CODEPAGE = 4110
[5956] new codepage 1160
[5956] HTTP Start : argc - 6 a0 - saphttp
[5956] /H/<IP> sapgw00 39113162 CPIC_TRACE=2 IDX=4
<Date time>
[5956] elapsed time 4625 ms - active time 0 ms - wait time 0 ms
[5956] SAPHTTP end
Thanks,
Deepak -
RFC error with SAPOSS (test connection)
Hello All,
RFC error with SAPOSS Test connection
Language:EN
Client :001
User :OSS_RFC
Target system settings:
Balace load = Yes
RFC error is below:
Connection test SAPOSS
Connection type: R/3 connection
Connection error Error opening an RFC connection.
ERROR partner not reached (host 209.94.207.139, service sapdp99)
LOCATION SAP-Server orionbw_QBW_00 on host orionbw2 (wp 0)
DETAIL NiPConnect
CALL connect
COMPONENT NI (network interface)
COUNTER 9
ERROR TEXT Network is unreachable
ERROR NUMBER 101
MODULE nixxi.cpp
LINE 8628
RETURN CODE -10
SUBRC 0
RELEASE 640
TIME Wed Jul 30 10:06:05 2008
VERSION 37
Please let me know how to proceed.
Thanks in advance.
Best Regards,
PratyushaHi Markus,
I went to OSS1 transaction Menu ---> Parameter --> Settings -
> SAP Routers at Customer Site ---> SAP Router 1
i have Added Name and IP address and instance No.
Now its throwing another error:
=============================================
ERROR rgcwebsrv: route permission denied (orionbw2.rgc.corp to 147.204.2.5,
LOCATION SAProuter 37.11 on rgcwebsrv
COMPONENT NI (network interface)
COUNTER 5580
MODULE
LINE
RETURN CODE -94
SUBRC 0
RELEASE 640
TIME Wed Jul 30 10:41:28 2008
VERSION 37
=============================================
We are struck here.
Thanks in advance
Best Regards,
Pratyusha -
How to do "Test Connection " in WorkFlow
Hi All,
Can any one please tell, how to perform Test Connection to a particular resource in workflow? I am looking for a particular method which performs only connection.
Thanks in Advance.
regards,
RaviGPFAC
type in rule
click description tab
change language
maintain. -
Latest ODBC driver 9.0.1.5.0 does not work/ test connection
Hello,
I am using an Oracle 9.0.1 database. Before, I installed the 9.0.1.4.0 (6/25/02) and the test connection in the ODBC Administrator works perfectly. I have problems to access a timestamp column. So I installed the latest available driver 9.0.1.5.0 (11/1/02). The installation did not report any errors but the test connection fails with "Unable to connect ...[Driver Manager] driver's SQLAllocHandle on SQL_HANDLE_ENV failed". What's wrong? Can I have both drivers installed in parallel?You can only have one ODBC driver installed per Oracle home. Unless you have multiple Oracle 9.0.1 homes, you can't have multiple 9.0.1 ODBC drivers installed.
Have you tried re-creating the DSN you're using? This generally isn't necessary, but it's in the README that comes with new drivers because there are occasionally circumstances where it is necessary.
Justin -
Error on testing connection in IDT
Hello,
I got a BI 4.1 SP03 over SBO. Connection is to MS SQL 12.
got a strange error while trying to create measure inside IDT, after a while that evertyhing was working fine.
Continued the 'investigation' and found out the connection in the BO to the DB fails - while pressing "EDIT" on the connection and pressing "Test" inside the popup - succeed.
Important: This is happening since upgrade from BI 4.0 to 4.1 SP03 3 days ago.
The file attached is the error I get while creating a measure on IDT.
Webi working fine, dashboards working fine. data is coming from DB fine. only IDT and DS runs into error (same error in all actions)
Couldn't find in similar case around - anyone have any idea?
Thank you,
Or.Hi,
I have seen the BI4.1 SP03 IDT test connection failed while the test of the same connection succeed in edit connection in IDT.
It seems that the connection I created, which is an Oracle JDBC connection, in BI4.1 SP03 universe designer is somehow not compatible with IDT test although the JDBC connection works in BI Launchpad and in Webi rich client.
The workaround is to delete this problem JDBC connection IDT does not like, and recreate it in IDT instead of universe designer. After that, this recreated JDBC connection works successfully on both universe designer and IDT connection test.
Hope this helps,
Jin-Chong
Maybe you are looking for
-
Dynamically Delay message in PI 7.1
Hi Guys, We are on PI 7.1 EHP1. We have a scenario where PI picks up the files. ( There might be multiple files for PI to pick-up) On receiver we are doing a HTTP post. Receiver takes 20 sec to process each message. The requirement is that - PI has t
-
Loading Window Component with Button!
Hello! I found two tutorials that both contain pieces of what i am looking for but i cant seem to figure them out and get exactly what i want. Here is the first one: http://livedocs.adobe.com/flash/8/main/wwhelp/wwhimpl/common/html/wwhelp.htm?context
-
Migration from sun/solaris to windows
While performing a migration of SAP from solaris to windows OS what are the implications, issues and things to keep in mind. Also which database would give the best performance (Oracle or MS SQL) and what are the specific requirements if latest relea
-
How to Install Application Server Control on top of AS J2EE Installation.
Hi, I just installed AS 10g 10.1.2, upgraded it to 10.1.2.3 and applied Jul2008 CPU. It was initially a simple J2EE install (with only J2EE and OC4J). It seems there is no EM Application Server Control component since all attempts below failed: http:
-
ITunes crashes when I choose an artist
About 2 days ago, I started having a problem with iTunes on my Macbook Pro (mid 2010). Whenever I open iTunes, go into "Artists" and choose one, iTunes freezes and crashes a few seconds after I have no idea why this started to happen since I haven't