INTEGRATION_DIRECTORY_HMI

Hi,
I am configuring INTEGRATION_DIRECTORY_HMI in SM59.When i select Basic Authentication under logon/security i get error saying that SSL client PSE DAFAULT does not exist.This is new installation XI 3.0 640
Thanks
Venkat

Choose the following parameters:
For Logon procedure select -- Basic Authentication
In Status of Secure Protocol
For SSL select -- Inactive
for SSL Client Certificate select -- DFAULT SSL Client (Standard)
Regards,
Sridhar

Similar Messages

Error in SXI_CACHE and reading HTTP destination: INTEGRATION_DIRECTORY_HMI

I have been going over many posts etc trying to figure out why this quit working. Basically everything was working fine, and I did a Integration Process Scenario and uploaded that, once that was complete I started getting cache errors that where affecting everything else already configured in XI.
I have tested in SM59 INTEGRATION_DIRECTORY_HMI and when I put in path
/dir/hmi_cache_refresh_service/ext I get back a 200 response on connection test
and put in path /dir/cacheRefresh I get a 500 response which I assume both are fine,
I have also tested by the ping test in sicf using PIISUSER along with the url test of http://<host name>:<port>/dir/hmidiag/ext?method=info all was successful
So the error seems to come when I run sxi_cache
If I do a delta cache it comes up with the following error Prefix number: entry missing for system PIT client 300
If I do a full cache refresh it runs in the background (and while it runs all the other scenario's work) but after the full cache comes back it has Unable to refresh cache contents with the message of Error when reading HTTP destination: INTEGRATION_DIRECTORY_HMI.
Also once this error is checked all other scenerio's quite working again with the following message
XIServer:UPDATE:Error when reading HTTP destination: INTEGRATION_DIRECTORY_HMI
Does anyone have any ideas?
I def award points
Cheers
Devlin

Hi,
I don't know if this is the exactly case we have here... but in our PI DEV and PRD environments it does not happen. In our QAS environment this error occurs everytime we create/change some integration scenario object and activate it. Then, all outbound interfaces start with this error. To solve it we go for a full refresh, delete Adapter Engine cache and restart ICM.
We are trying for a long time to search why this happens only on QAS environment without success... But thanks good it does not happen in PRD
regards.
roberti

Error in INTEGRATION_DIRECTORY_HMI and CACHE REFRESH

Hi guys, well after checking the forum and several blogs i can't get rid of my problem!
I have a problem concerning INTEGRATION_DIRECTORY_HMI and CACHE REFRESH.
i wanted to get a file from a FTP-Server via CC and i got error:
<SAP:AdditionalText>Error when reading HTTP destination: INTEGRATION_DIRECTORY_HMI.</SAP:AdditionalText>
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Error while refreshing the XI runtime cache</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
Because of this i tried to update my cache (SXI_CACHE). When i do a Delta Cache Refresh i get:
Prefix Number: entry missing for system SSID client 100.
When i do a complete Cache Refresh nothing happens at all. I also checked the cache notification in IB - Integration Directory where i fin dout that only the Integration Server (ABAP Cache) won't refresh. Well status is started but nothing else is happening.
Then i checked the RFC INTEGRATION_DIRECTORY_HMI, did a connection test where i get an Internal Server error.
Let me tell u that the systems runs very well in the last days but now i have no clue what might be wrong.
Can somebody please advice me? I already read all blogs concerning this and also did a complete system-restart....
br Jens

when you check INTEGRATION_DIRECTORY_HMI with SM59 it is normal to get
HTTP Response 500 - Internal Server Error. In this case it meens everything OK
see the rediness check, that is attached to SAP note 817920
when you start the complete cache refresh, you can see
the function module SAI_CACHE3_REFRESH_BACKGROUND in SM58. As long as you can see this entry, the cache
refresh is ongoing. If the refresh takes too long and runs on an error, try to specify another timeout in INTEGRATION_DIRECTORY_HMI or in the ICM
Best Regards
Alexander
Message was edited by:
 Alexander Wrobel
Message was edited by:
 Alexander Wrobel
Message was edited by:
 Alexander Wrobel

What is the service number in INTEGRATION_DIRECTORY_HMI

Can any one tell me What is the service number in INTEGRATION_DIRECTORY_HMI.
Is it J2EE PORT (THE WE FIND IN xi home page URL)OR HTTP PORT (the one we find in SMICM > Goto > services)
-Naveen.

Hi,
It should be 5<Java inst no.>00
Also have a look into this document
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/1a69ea11-0d01-0010-fa80-b47a79301290
Regards,
Prakash
Message was edited by: Prakash Arunachalam

Error when reading HTTP destination: INTEGRATION_DIRECTORY_HMI

Hi, PI experts.
When refreshing XI cache I get following error:
Error when reading HTTP destination: INTEGRATION_DIRECTORY_HMI.
Status of XI Runtime Cache is
Unable to refresh cache contents
Error during last attempt to refresh cache
When starting cache delta refresh I get an error OBJECTS_OBJREF_NOT_ASSIGNED
HTTP-destination INTEGRATION_DIRECTORY_HMI works correct (gives an error 500)
In Cache Connectivity Test - Java IS and Adapter Engine are green and ABAP IS is yellow giving message Attempt to fetch cache data from Integration Directory not yet started or still in process
I also read forum threads:
sxi_cache
Error while refreshing the XI runtime cache
and How To Handle XPI Caches in SAP NetWeaver 04s but didnt find there a solution
Can anybody give me an advice how to solve this problem

Hi
You please check the INTEGRATION_DIRECTORY_HMI in SM59.
Check the following fields:
Target host:host name of xi
Service No:xxxxx(ex:53000)
Path Prefix:/dir/hmi_cache_refresh_service/ext
make sure the service no is not Java port.
Logon credentials:
User:XIISUSER

404 Not Found Error while testing INTEGRATION_DIRECTORY_HMI

Hi,
I am installing XI 3.0 SR1 on Win2000 sp4. I got struck at page 40 of installation guide trying to configure rfc destination INTEGRATION_DIRECTORY_HMI. I gave all the parameters as specified in the guide and clicked on "Test". I am getting the 404 Not Found error. The detalied error log is attached below. Can some one please let me know what could be the reason for the error?
Thanks
Sireesha
HEADER NAME HEADER VALUE
~response_line HTTP/1.1 404 Not Found
~server_protocol HTTP/1.1
~status_code 404
~status_reason Not Found
connection close
pragma no-cache
cache-control no-cache
expires 0
content-type text/html
content-length 1539
server SAP J2EE Engine/6.40
date Fri, 03 Feb 2006 04:00:56 GMT
HTTP BODY
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN"> <html>
<head> <title>Error Report</title> <style> td {font-family : Arial,
Tahoma, Helvetica, sans-serif; font-size : 14px;} A:link A:visited A:active </style
> </head> <body marginwidth="0" marginheight="0" leftmargin="0" topmar
gin="0" rightmargin="0"> <table width="100%" cellspacing="0" cellpaddin
g="0" border="0" align="left" height="75"> <tr bgcolor="#FFFFFF">
<td align="left" colspan="2" height="48"> 404 &nbsp Not Found</td> </tr> <tr bgcolor="#3F73A3"> <td height="23" width="8
4"><img width=1 height=1 border=0 alt=""></td> <td height="23"><img
width=1 height=1 border=0 alt=""></td> <td align="right" height="2
3">SA
P J2EE Engine/6.40 </td> </tr> <tr bgcolor="#9DCDFD">
 <td height="4" colspan="3"><img width=1 height=1 border=0 alt=""></
td> </tr> </table> The requested
resource does not exist. <table><tr><td valign="top">&nbsp
;Details:</td><td valign="top"><PRE>Go to <A HREF="/" target="_paren
t">main page</A> of this application!</PRE></td></tr></table></fo
nt> </body> </html>
Time (ms) 134

Hi Sireesha -
>>>As per your suggestion. I am trying to reinstall the XI Component again. But the setup is not asking me for any uninstallation of the existing setup nor any message saying that you already have the XI Component installed. Does it mean that the XI Component got deleted automatically?
It's hard for me to say not being able to see your system, but here are some things you can check:
- check link http://<xi_host>:<j2ee_port>/sap/monitoring/ComponentInfo
You should be able to see components like SAP_XITOOL, SAP_XIAF, SAP_XIAFC which would indicate that XI components are installed. You need role SAP_J2EE_ADMIN to access this.
- Using SDM, you can see what's currently deployed in the SDM repository for XI related components.
- Using Visual Admin, you can look for XI related services within the Server instance.
But in any case, try reinstalling the XI Java components (which is really what you're installing following the SR1 Installation Guide). If you run into problems during the installation and it's possibly due to already existing XI components, I would recommend, cleaning the slate and uninstalling the J2EE Add-in and starting again from the J2EE add-in part. Instructions for deleting the add-in are in the corresponding WebAS Java 6.40 <platform/db> install guide (in the last section - "Additional Information").
Regarding the central adapter engine, yes, this is installed automatically when you do the main installation of the XI Java components. Instructions in the SR1 guide specifically referring to the Adapter Engine are for a decentral adapter engine.
Hope that helps.
Best regards,
Jin

Connection Test issue with newly created INTEGRATION_DIRECTORY_HMI in PI7.0

Hi Pals,
Due to change in password for user "PIISUSER" in our system, i changed the login credentials in sm59 -> INTEGRATION_DIRECTORY_HMI.
But the test connection failed, popping up the username/password login dialog again and again.
So i deleted the RFC Connection "INTEGRATION_DIRECTORY_HMI" and recreated it with all the care mentioned in the XI installation guide, manually, step by step.
But again the test connection failed, popping up the username/password login dialog again and again.
I tried this exercise for almost 15 times but without success.
NOTE: I am able to login with "PIISUSER" from SAP system Login successfully.
Looking forward for your kind suggestions.
Thank you!
Saravanan

hi
could be the problem with password..we also faced the same problem while using an alphanumeric one.
after changing to a completely numeric one it started working fine
rgds
Arun

RFC destination - INTEGRATION_DIRECTORY_HMI

While creating the
RFC destination - INTEGRATION_DIRECTORY_HMIin the integration server, on logon & security tab, what is the user that should be given.
As the source is ID, I thought it could be PIDIRUSER.
Correct me
-Naveen.

Lars,
The logged in user should have proper authorizations for SU01 transaction.
Go to SU01 > type PIISUSER and reset the user's pw, if u r not sure of the PW.
-Naveen.

Error in :--INTEGRATION_DIRECTORY_HMI :--Solved

hello frnds,
after a fresh installation in configured a soap 2 rfc syn scenario ..and i encountered a XIAdapter Exception.
after struggling a lot with all the connections..
i got into the Http connection for
INTEGRATION_DIRECTORY_HMI:-- in target host the path
prefix was "/dir/CacheRefresh" i changed it to
"/dir/hmi_cache_refresh_service/ext "
Then it started working fine..
CAN ANYONE TELL WHAT WAS THE REASON OF SUCH ERROR AND WHAT IS THE DIFFRENCE BETWEEN THESE TWO...
waitingh for ur replies.
simraan.

Hi,
That answer is gr8. Itz solved my error also, with status code 200. Status text as OK.
I was getting the status code as 500, & status text as Internal server error.
Thanks & Regards,
Balaji

Internal Error: INTEGRATION_DIRECTORY_HMI

Hi,
In XI Server, T.Code SM59, HTTP Connections to ABAP System->
INTEGRATION_DIRECTORY_HMI
if i do the Connection test, it is showing one popup box:
Response from Web Server Contains Cookies
Accept?
if i click yes or no,
in the test result tab,
it is showing Status Text as
Internal Server Error
Also,
In the Runtime Workbench, when i click Message Monitoring tab, it is showing this error:
javax.ejb.CreateException: Unable to log on to system IDS in language en with user PIRWBUSER
Also, in the Component Monitoring,
Components>Integration Engines>
Proxy Runtime BS_IDES_765
Here, BS_IDES_765 is the business system i created in SLD.
Showing error as:
Details for 'Ping Status'
Message: Unable to log on to system BS_IDES_765 in language en with user PIRWBUSER
Stacktrace:
com.sap.aii.rwb.exceptions.OperationFailedException: Unable to log on to system BS_IDES_765 in language en with user PIRWBUSER
at com.sap.aii.rwb.core.XIAbapRTCComponent.getConnector(XIAbapRTCComponent.java:114)
at com.sap.aii.rwb.core.XIRTCComponent.ping(XIRTCComponent.java:199)
at com.sap.aii.rwb.web.componentmonitoring.model.CompTestModel.doPing(CompTestModel.java:583)
at com.sap.aii.rwb.web.componentmonitoring.viewcontroller.CmDynPage.doPing(CmDynPage.java:298)
at com.sap.aii.rwb.web.componentmonitoring.viewcontroller.CmDynPage.updateTests(CmDynPage.java:372)
at com.sap.aii.rwb.web.componentmonitoring.viewcontroller.CmDynPage.selectNode(CmDynPage.java:388)
at com.sap.aii.rwb.web.componentmonitoring.viewcontroller.CmDynPage.process_treeClick(CmDynPage.java:339)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:324)
at com.sapportals.htmlb.page.DynPage.doProcessCurrentEvent(DynPage.java:172)
at com.sapportals.htmlb.page.PageProcessor.handleRequest(PageProcessor.java:115)
at com.sapportals.htmlb.page.PageProcessorServlet.handleRequest(PageProcessorServlet.java:62)
at com.sapportals.htmlb.page.PageProcessorServlet.doPost(PageProcessorServlet.java:22)
at com.sap.aii.rwb.web.componentmonitoring.viewcontroller.CmPageProcessor.doPost(CmPageProcessor.java:35)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sap.engine.services.servlets_jsp.server.runtime.RequestDispatcherImpl.doWork(RequestDispatcherImpl.java:321)
at com.sap.engine.services.servlets_jsp.server.runtime.RequestDispatcherImpl.forward(RequestDispatcherImpl.java:377)
at jsp_FC_Secure1208243635625._jspService(jsp_FC_Secure1208243635625.java:24)
at com.sap.engine.services.servlets_jsp.server.jsp.JspBase.service(JspBase.java:112)
at com.sap.engine.services.servlets_jsp.server.servlet.JSPServlet.service(JSPServlet.java:544)
at com.sap.engine.services.servlets_jsp.server.servlet.JSPServlet.service(JSPServlet.java:186)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:390)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:264)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:347)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:325)
at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:887)
at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:241)
at com.sap.engine.services.httpserver.server.Client.handle(Client.java:92)
at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:148)
at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
at java.security.AccessController.doPrivileged(Native Method)
at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
Regards,
Balaji

This error only you should get when you test. Check this document (Point 23 and 24). An HTTP return code 500 (Internal Server Error)indicates that everything is okay.
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/c0332b2a-eb97-2910-b6ba-dbe52a01be34
The RFC destination (SM59) INTEGRATION_DIRECTORY_HMI is used to store the data in the cache. This data is about the connection Between the Integration Builder and Runtime
Solution
1. On the Technical Settings tab page, check target host and port (this has to be that of the Integration Directory)
2. Check for the password.
SAP Note 721548
1)Check out the following SAP Notes 807000, 928038 and 804124
2)This error might occur if you are using lower version of JRE/J2SE.
3)Check the logs from the VIsual Admin -> server -> Services -> Log viewer.
This might help you
/people/shabarish.vijayakumar/blog/2006/02/13/unable-to-open-iresrid-xipipi-71-updated-for-pi-71-support
pls reward points if solution found helpfull
regards
chandrakanth

INTEGRATION_DIRECTORY_HMI rfc returning error 403

Dear Experts,
I have installed SAP Netweaver 7.4 PI server on windows and MS sql 2012.
i have below issues which i could not get proper solution
1)RFC INTEGRATION_DIRECTORY_HMI returning error as 403: forbidden . This RFC is pointing to /dir/CacheRefresh
2)while creating demo scenarios in Advance adapter engine the file location is showing "/", i tried putting some different directory but getting error as "directory does not exist" so can you tell me which is a default directory for same and in which parameter we can change it.
3)In advance adapter engine some of components are not working and showing in red. what to do in that case
4) I am using Java 6 for opening ESB but it is taking long time and second time it is not opening without restart.
Warm Regards,
Sumit

Hi Sumit,
Please see the below link. Seems to be the same issue.
INTEGRATION_DIRECTORY_HMI 403 Forbidden
Regards,
Jannus Botha

Error when testing INTEGRATION_DIRECTORY_HMI rfc port

hi friends,
I have created a RFC port of type HTTP INTEGRATION_DIRECTORY_HMI it was working fine tillyesterday..
All of a sudden 2day when i am executing the proxy i got error. when i check the rfc is not working.. and giving this error ..
ICM_HTTP_CONNECTION_FAILED
Please suggest me what can i do for that..
Regards
Vijay

hi
In my case all the four rfcs
INTEGRATION_DIRECTORY_HMI
2.        SAPISU_XID
3.        LCRSAPRFC
4.        SAPSLDAPI
are working fine..
and now sproxy is not working now ..
Repository Version   UNKNOWN
when i check =>Check/maintain with report SPROX_CHECK_IFR_ADDRESS
i am geeting this error.
Regards
Vijay

INTEGRATION_DIRECTORY_HMI - Response Code 200

Hi Experts,
Readiness Check Document for PI 7.1 suggests that HTTP Response code for INTEGRATION_DIRECTORY_HMI should be 500. But when I am testing this on my PI 7.1 EHP1 server, I am getting 200 as HTTP response. Is this normal? If not, please let me know what to do. Thanks in Advance.
Cheers,
Phani Akella.

Hi Phani,
As you have mentioned according to the sap pi 7.1 documentation
http://help.sap.com/saphelp_nwpi71/helpdata/en/8f/770f41218ff023e10000000a155106/content.htm
the test is successful if the response status code is 500 and you find REQID not found in the response body.
in PI 7.1 when i checked ,i am getting 500 status code.
could you please let us the message that you are getting any different error message.If you are getting the same message which used to come when response code is 500.if yes this might be a change in EHP1.
Regards,
Srinivas

INTEGRATION_DIRECTORY_HMI: Test failed

Hi! ALL
We have installed PI 7.1 and were going over our check list to make sure installation is complete and system is ready..
However, going over the standard check list we found that the following RFC connection failed:
INTEGRATION_DIRECTORY_HMI : When we clicked test connection; it had the Status Text as "Internal Server Error"
However, our messages are flowing fine thru PI ...
Would like to know where the INTEGRATION_DIRECTORY_HMI is used; as it seems to have an error when tested...but, we haven't seen any problems in terms of message flow through PI.
Please, let us know the purpose/functionality of INTEGRATION_DIRECTORY_HMI and how we can fix this error.
Thank you,
Ritu

Hi
That indicates everything is OK
check this guide, page 15 and 16
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/1a69ea11-0d01-0010-fa80-b47a79301290
Regards
Vishnu

INTEGRATION_DIRECTORY_HMI test connection

on SM59, INTEGRATION_DIRECTORY_HMI,
when i tried to test connection,
always WINDOW POP UP to input ID and password
otherwise, SXI_CACHE, same issue happened
but, after type XIISUSER and password, it goes ok
as up-to-date green icon
does anyone know to eliminate logon pop up window?
and according to post-installation guide,
500 errror come up is normal when test connectoin on INTEGRATION_DIRECTORY_HMI, is it ok?
thasks in advance

This is a old trick, except after entering the description and RFC Dest type, do not press ENTER button at all.
This trick was mentioned by one of our members a year ago.
regards
Shravan

INTEGRATION_DIRECTORY_HMI

Similar Messages

Maybe you are looking for