Integration Directory Not working

Hi All
When i click in Intergration Directory, i am getting the following message
"The requested client is unknown"
Regards
Madhan D

Hi Madhan,
Try restarting java stack it will work.
Unable to start integration builder: configuration
Regards,
Naveen

Similar Messages

Integrated ethernet not working

I have a K7N2 Delta ILSR mainboard. I was trying to use the integrated network adapter but it was NO GO. I updated to the latest drivers, but still NO GO. I installed a pci network card and that solved the problem, but I'm just a little pissed about these integrated features not working. Does anyone have any troubleshooting pointers for me?

I had problems with my system and my PCI ethernet card.... was giving me hell, downloaded drivers and everything... IRQ's are main problem with my board, and that was what it happened to be for me... I found this out 2 weeks after I set up my USB connection to my cable modem... I'd recommend using a USB connection, fast, efficient, and most of all....it's easy. As they say, patience is a vitue... Well, I happen to be a very sinful man, lol...goodluck with your Ethernet connection

Integration Directory not getting opened

hi All,
We are not able to open Integration Directory in XI 7.0 but IR (repository) works fine. While i was browsing through the Forum found (Forum ID# 135222) that we can just re-start the sap.com/com.sap.xi.directory in Visual Administrator but not sure where it's located in VA. Please help to resolve thi problem.
Thanks
Sekhar

Hi,
try re-initialization
from this blog:
Java Web Start
then is should start working
Regards,
Michal Krawczyk

Integration DIRECTORY not STARTING

HI all,
I am able to login to Integration reepository (IR). If i right click and do save as the file is saved as .JNLP file .
I am not able to login to Integartion Directory (ID).
If i right click and do save as the file is saved as .HTML file .
now i know this is the problem but i am not able to correct it. Can anyone guide me how to do ?
I am seen all the relevant blogs regarding ID not starting and done all checks .
It is really urgent .....
REgards
Niladri

Hi Niladri,
Why don't you try replcing your server name with the IP Address while starting the Integation Directory. I men when you open the Integration Directory it would say page not found , in the adress tool bar just replace your server name with IP address. it may work . If it works then the problem is there in the exchange profile which is created in the administration. Ask your basis guys to have a look at the exchange profile once again.
Cheers
Arvind

Absolute links on hml page in local directory not working

All the absolute links on my html pages (which are on my hardrive) are being treated as local links and are therefore not working - i.e. Firefox is adding the local file path before the url. For example, the original link is: http://www.insidehousing.co.uk/legal/criminal-conviction-for-illegally-subletting-tenant/6518844.article
But Firefox is adding the directory path so the url string becomes: /www.insidehousing.co.uk/legal/criminal-conviction-for-illegally-subletting-tenant/6518844.article%E2%80%9D
It is also being appended with: %E2%80%9D (which, when tested from a Word page, leads to site but generates page not found error).
For testing purposes, is there any way I can reconfigure Firefox to parse my links as absolute?
Many thanks

Thanks, both. I have carried out cor-el's suggestion of replacing the smart quotes with dumb quotes, then tried viewing link on file again using different encoading, including UTF-16 - same result as before.
Below I've set the HTML of the whole page, as per yalam96's request (it includes cor-el's suggested fix to the "prosecute" link):
<pre><nowiki><h3>Who do you need to inform (in the UK)?</h3>
If you have a mortgage, you will need to inform your provider (with most lenders this shouldn't be an issue – you do not need “consent to let” as you would if you were letting out the whole property) but you do still need to inform them; why? This is partly for the protection of your lodger, if you should default on the mortgage or die, but mostly for your own protection – if the property was destroyed or badly damaged because of the negligence of your lodger.
If own your property and it's leasehold, check the lease – you may need permission from the freeholder.
If you rent your property, you will need to firstly check with your landlord (this applies whether you rent privately or from a public landlord – Local Authority or Housing Association), and get their permission in writing, just as you would with a mortgage provider. Incidently, in the UK, a public landlord is only likely to object to the let if moving a lodger in would mean your home becomes over crowded (e.g. you have a two bed flat and your children would have to share your bedroom). They will also object – they might even <a href=”http://www.insidehousing.co.uk/legal/criminal-conviction-for-illegally-subletting-tenant/6518844.article">prosecute</a> - if you move out and let the whole property to the “lodger” (who wouldn't be a lodger in that case, but a full tenant, with full tenant's rights).
You may also need to cancel any existing residential home insurance and take out <a href=”http://www.landlordinsurance.biz/landlord-insurance-guides/landlord-insurance-faq/”>landlord insurance</a>. A few residential policies will, however, allow lodgers. Landlord insurance will not cover the lodger's possessions, they will need to get their own insurance, known as Tenant Insurance – policies can be compared on sites such as <a href=”http://www.confused.com/campaign/home-insurance/tenants-content-insurance?MediaCode=1054&kw=lodger+contents+insurance+broad&gclid=CPbbn9-Nj7MCFanItAod3GAAog”>confused.com</a>
If you get a single occupier's discount on your council tax, you will need to inform your local authority, unless your lodger is <a href=”https://www.gov.uk/council-tax/council-tax-exemptions”>exempt</a> from paying council tax (e.g. they're a university student).
NB People claiming Jobseeker's Allowance and most other benefit claimants are not exempt – they are, however, usually entitled to Council Tax Benefit to help with some or all the cost of their council tax.
If you're letting on a Monday – Friday basis (to someone who only needs a week night let), this person would not normally pay council tax at your property, as they already pay against their main (family) home. However, if for whatever reason you and your Monday – Friday lodger decided that they would use your address as their main home, they would then become liable to pay council tax at your address and you would lose any single occupier's discount.
If you claim any kind of means tested benefit (such as job seeker's allowance, housing benefit or council tax benefit) as benefit rules currently stand (January 2013) your rental income will affect this. Contribution based Job Seeker's allowance (JSA(C)) will be affected if your weekly rental income exceeds £50. If you're on income based jobseeker's allowance (JSA(I)), it's very likely to be affected; however, to what extent will depend on your rental earnings and circumstances and a DWP adjudicator will decide this.
However, from October 2013, when Universal Credit takes effect in the UK, <a href=”http://www.insidehousing.co.uk/tenancies/lodger-rules-to-ease-impact-of-bedroom-tax/6522846.article?MsgId=57059”>a public housing tenant's income from renting a room will no longer affect their benefit entitlement.</a></nowiki></pre>

Integration Builder: Configuration Integration Directory not start.

Hello,
After we patch PI from sp14 to sp 23 while we starting the Integration Directory, it result in the error "Unable to launch the application"while verifying the application:
com.sun.deploy.net.JARSigningException: Could not verify signing in resource: http://<hostname>:port/dir/directory/aii_ibdir_sbeans.jar.
we have jre 1.6.0_24.
I get this error:
com.sun.deploy.net.JARSigningException: Could not verify signing in resource: http://pint1.dlg.dk:50000/dir/directory/aii_ibdir_sbeans.jar
 at com.sun.deploy.cache.CacheEntry.writeManifest(Unknown Source)
 at com.sun.deploy.cache.CacheEntry.access$2000(Unknown Source)
 at com.sun.deploy.cache.CacheEntry$9.run(Unknown Source)
 at java.security.AccessController.doPrivileged(Native Method)
 at com.sun.deploy.cache.CacheEntry.writeFileToDisk(Unknown Source)
 at com.sun.deploy.cache.Cache.downloadResourceToTempFile(Unknown Source)
Regards

Hi,
When I start Internet Explorer with this url http://port:50000/rep/start/Main.jsp
I get this massage: on Additional Information
Webpage error details
User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 5.2; WOW64; Trident/4.0; .NET CLR 2.0.50727; .NET CLR 3.0.04506.30; .NET CLR 3.0.4506.2152; .NET CLR 3.5.30729)
Timestamp: Mon, 28 Mar 2011 09:20:36 UTC
Message: 'parent.InnerFr' is null or not an object
Line: 61
Char: 15
Code: 0
URI: http://port:50000/rep/start/XI.js
Can it be reason I can not start * Integration Builder: Configuration Integration Directory*. And get this massages:
com.sun.deploy.net.JARSigningException: Could not verify signing in resource: http://port:50000/dir/directory/aii_ibdir_sbeans.jar
Any Help
Regards

Erro to aplly note 764176 - Integration Directory not appear

Hi everyone...
After applied note 764176 (step 5) my Integration Directory is not appearing in SLD as tecnical system. Does anybody know how to solve this problem ?
Best Regards
Wendell

Hi All,
I got solved the error before, but now my Adapter Engine still is not appearing in Integration Directory. Could you help us ?
Note. I applied full note 764176.
Best Regards

N8 integrated GPS not working ANNA

Hi,
Integrated GPS is not working on my New N8 with anna. I tried Hard rest and even Google maps. OVI works with A-gps but position is highly inaccurate. I can see a notification which says GPS available but no satellites are locked. Confirmed this with Google maps. Is this a hardware issue?

Sounds like a dud antenna but...
If it was working before Anna then check your Positioning Settings under Settings/Application Settings/Positioning especially check that the Positioning server is set to supl.nokia.com
Have you tried the Battery Out Reset (Power off the hold power button for about 8 seconds until you feel three vibrations)
Try re-installing Anna using Ovi Suite or Nokia Software Updater.
Note: if your in an area with no Internet connection it may take 20 minutes or more to get an initial fix and it's best to be stationary while its doing it.
Good Luck.
N95 (RM159) V31.0.017, N8 (RM596) Belle 111.040.1511

Searchspec on Siebel Integration Component not working

Hi All,
Has anyone successfully applied the user property 'searchspec' on a Integration Component?
I have tested but it's not working for me. I have seen that this user property exist on some of the standard vanilla ICs.
Regards,
Hakan

I agree, we have not been able to get it to work. What you're supposed to be able to so is pass the SearchSpec as a parameter through the web service so the web service will apply that spec to the IO when querying, but that also does not work (though it's supposed to). I have an open ticket with Oracle and they are identifying the issue as we speak.

Leopard Client Tiger server mobile home directory not working... hmmm

Mobile home directory is not working for my leopard clients with my tiger server.
I can log in via the Apple server account that is set for mobile.
On my tiger clients it prompts me to confirm my mobile account on log in and everything works fine if i unplug the network cable.
on my leopard clients no prompt at log in. so i go to account under system prefs and see that the account says mobile..and i click on make mobile account in the account pane in system prefs says will reboot and make account.. prompts for password for mobile account i put it in and then it says there was an error in making mobile account and then it takes me back to the main log in window.
every client i have on leopard does this...
am i missing something?
thanks in advance,
Jesse

Tiger server can control mobile account syncing and other features present on Tiger clients.
See this post for some more info on setting Leopard mobile account preferences on Tiger servers:
http://discussions.apple.com/thread.jspa?messageID=6829482&#6829482

Lenovo x201 tablet laptop Integrated Webcam not working

I recently had to reinstall windows onto the Lenovo x201 tablet laptop and I can't get the integrated webcam to work on Google+. I tried downloading the integrated camera driver but during installation it stops about 3/4s of the way and the installation cancels. Not sure how to fix this , I checked under Device Manager and the camera driver is not listed under imaging devices. Does anyone have a solution to this? Thanks.

Hi
Welcome to the community.
As per our concern, I would suggest you to please re-install the camera driver from the below mentioned web link.
http://support.lenovo.com/en_SG/downloads/default.page?#
After that please perform the following steps.
1. Press Fn+F6 to enable the camera.
2. Click the Manage Settingsbutton. The Communications Utility window opens.
3. In the Communications Utility window, configure the camera settings depending on your individual needs.
Regards,
Sameer

Integrated camera not working windows 8 X201

I upgraded to Windows 8 some time ago and did not notice that my integrated camera is not recognized, the driver is not listed in the downloads for the laptop but states this is a Windows Inbox Driver. Where can I get the driver AND where in the device manager is it listed. Thanks.

I would not upgrade to Windows 8, lots of issues and the camera still does not work. It does work when I load Linux so its not the camera. I have tried everything, old drivers, new drivers. My wireless doesnt work either, not sure I'd get anothe Lenovo.

Integrated camera not working properly

Hej hej,
I just bought a new Thinkpad E540 laptop and my integrated camera was not working properly since the begining. I used Winodws 8 before, upadated it to 8.1, installed the last drivers (at least I think I did), but the problems stays the same. Camera is not working properly as it can clearly be seen from this picture:
Link to image
It used to work for few days froperly but only when using Windows Camera application, but never in skype or other applications, so it has to be software issue.
Thanks for your help.
Kind regards,
Matej
Moderator note: large image(s) converted to link(s): About Posting Pictures In The Forums

Lenovo has not yet released camera drivers for Windows 8.1. Below link gives list of camera drivers for Thinkpad E540. Select 'Camera and Card reader' and you get list of camera drivers.
http://support.lenovo.com/us/en/products/laptops-and-netbooks/thinkpad-edge-laptops/thinkpad-edge-e5...
In this case, you need to downgrade your OS to Windows 8 or contact Lenovo service center for Windows 8.1 camera driver.

Integrated Camera not working on X201

Hello
I have a X201 3626-A61. Installed windows XP.
1. I have a brand new hard disk, installed fresh windows XP and my integrated camera works perfectly from windows explorer. Through device manager, I checked that its sensed as a USB Video Device and uses I guess the default microsoft driver. I did this extra step to ensure that there is NO hardware problem with my camera.
2. Then I insert back my regular hard disk that I use daily. This is where the problem is. As soon as I right click on the "USB video device", I get error "Creation of Video preview failed". In device manager, it shows as USB video device and shows the default microsoft driver. I have tried downloading both versions of the drivers available on lenovo ( I dont know why there are 2 separate files) and it does not help. When I install them, device manager show's up as "integrated camera". Uninstall of lenovo driver actually does not uninstall it correctly. So I had to delete all the relevant entries from the registry and even from oem*.inf files. No luck
I even tried to un-install the "usb video device" from device manager and also uninstalled all the items listed under "universal serial bus controllers".. but no luck.
One thing I observed was that as soon as I uninstall all these and then do a scan for hardware changes, it installs the enhanced host controller, usb root hub, generic usb hub, and for a second it detects it as "integrated camera" with a yellow mark and then it automatically changes to "USB video device". I feel this is the error.. where the Lenovo driver remains are still there somewhere and it partially detects it as integrated camera and then it conflicts with the Microsoft USB video camera drivers......
Can some one please help ?

Serge1410 wrote:
hey manojpatil,
let me get this right
new hard drive with fresh XP, camera works correctly.?
old hard drive with (os?), camera fails to work?
I'm a bit curious to know, lets say with the old hard drive- will the camera work if you uninstall the drivers and let windows install generic drivers ?
If possible, try uninstalling on Lenovo software that you have installed on your unit and try again
Yes, when I insert a brand new hard disk and then install a fresh Windows XP on it, the camera works like a charm. It shows up as a USB Video device on my windows explorer and when clicked, it shows my face I carried out this experiement to ensure that there is no connections or hardware issue.
However, when I insert my original regular use hard disk that has 5 month old win XP ( which means i have installed softwares on it ), it does not WORK. I have tried installing, uninstalling the Lenovo software. No luck, even after uninstallation, the driver was still pointing to the lenovo binaries/dlls, so I did a clean up of those using regseeker in the registry... and then let windows xp find the hardware, which it does and installs the default windows drivers and the camera shows up as "USB video device" in device Manager. However, when I click on it in the windows explorer, I do not get any image but the error "video preview failed........". I even tried copying al the .ax, .dll and .sys files that device manager shows in the brand new hard disk / new XP onto my hard disk,,, but not luck..... This is just so very frustrating..... as I cannot install fresh my XP....
What is confusing to me that why is the driver that is available on the Lenovo website not fixing my problem when I install them fresh on my old hard disk ? Also, there are 2 links on the Lenovo website that point to 2 different binaries for the integrated camera drivre and I have tried using both.

Screen sharing mobile account (open directory) not working

Can anybody else verify that screen sharing, through Remote Management, does not work when trying to connect to mobile accounts on 10.7 Lion?
Please note, when I say through Remote Management, I mean that under System Prefs->Sharing->Screen Sharing is disabled but Remote Management is enabled. (Remote Management being able to provide it's own screen sharing)
Also I dont mean VNC... please make sure the "VNC viewers may control my screen with password" option is turned off under System Prefs->Sharing->Remote Management->Computer Settings

I can confirm this. Same experience here on a 10.7.2 Mac.
I get a "Please verify you have entered the correct name and password".
Does this work on 10.6? I'm unable to check at the moment.

Integration Directory Not working

Similar Messages

Maybe you are looking for