Integration Directory view by scenarios PI 7.1

Hi all.
In Integration Directory PI 7.1 in navigation area i have only 2 page: Objects and Change List.
In old system 7.0 i have 3 page: Scenarios, Objects and Change List.
How show in 7.1 page Scenarios there object grouping by scenarios.
Regards
Max

In addition to the FOlder option you also have the Configuration Scenario option present in PI7.1......there has been no deletion in the type of objects created....
Right-click---> New ---> Administration ---> Configuration Scenario.....
I hope this is what you are looking at!
Regards,
Abhishek.

Similar Messages

No service for system SAPNID, client 800 in Integration Directory

Hi All,
I am getting No service for system SAPNID, client 800 in Integration Directory in tRFC monitor (SM58).
My scenario is IDOC to File.
I did following step in R3.
1. Created RFC destination pointing to XI systems (name:XID)
2. Created IDOC port (name: SAPNID) and use above (XID) RFC in RFC destination.
3. Create Partner Type LI (Partner No. 3000) and add message type ORDERS, set the receiver port (SAPNID) created above.
XI Side.
1. Create Technical System (Name : XID)
2. Business Systems (Name: R3XID)
3. In Integration Repository.
 Created Data Type
 Import IDOC ORDERS.ORDERS04
 Created Message Interface
 Created Message Type
 In Mapping Object created Message Mapping and Interface Mapping.
4. In Integration Directory
 Created the Scenario (name : FILE_FROM_IDOC)
 Assign Business Systems as R3XID
 Create communication channel(name: FILE_ORDERS_COM_CHNL)
 Create Receiver Determination
 Interface Determination
 Receiver Agreement.
IDOC is triggered correctly but in tRFC monitor I am getting following error
No service for system SAPNID, client 800 in Integration Directory
With regards
Sunil

Hi Udo/Renjith and Rakesh,
Thanks for quick reply and appreciate you help.
Now I can say that there is some problem with my Technical Systems or Business Systems, let me give you details regarding my Technical/Business systems.
During post-Installation i created Technical/Business System, following are the details regarding these systems.
Technical Systems.Detail
System Name: XID
System Home: crmides
Installation Number: INITIAL Change...
Release: 640
Description:
Administrative Contact:
TMS Domain:
TMS Transport Group Name:
Clients: 100 800 Add...
Message Server: XID crmides
Central Application Server: crmides_XID_00
Secondary Application Servers: Add...
Internet Transaction Servers: Add...
Installed Products: SAP EXCHANGE INFRASTRUCTURE, SAP EXCHANGEINFRASTRUCTURE 3.0 XID
SAP R/3, 4.5B XID on crmides
SAP R/3, 4.6C XID on crmides
Add...
Installed Software Components
Business Systems:
1. R3XID
2. SAPNID
Earlier I have only one Client (100) and One Busines Systems (R3XID)
My XI Systems is XID Host : crmides Client : 100 System Number : 00
My R3 Systems is NID Host : netbw Client : 800 Systems Number : 02
Business Systems Detail
Name: R3XID
Description:
Administrative Contact:
Business System Role: Integration ServerApplication System
Pipeline URL:http://crmides:8000/sap/xi/engine?type=entry
Integrated Business Systems: SAPNID
Group: (No Group Assigned)Edit Groups...
Transport Targets:
Technical System: XID on crmides Change...
Client: 100 of XID
Logical System Name: SAPNID
Installed Products: SAP R/3, 4.5B XID on crmides
SAP R/3, 4.6C XID on crmides
SAP EXCHANGE INFRASTRUCTURE, SAP EXCHANGEINFRASTRUCTURE 3.0 XID
Software Components: ABC, 1.0 of knack
R/3 CORE 4.5B
SAP ABA 4.6C
SAP ABA 640
SAP APPL 4.6C
SAP BASIC JAVA LIBS 6.30
SAP BASIS 4.6C
SAP BASIS 6.40
SAP GUI FOR WINDOWS 4.5B
SAP GUI FOR WINDOWS 4.6C
SAP GUI FOR WINDOWS 6.20
SAP HR 4.5B
SAP HR 4.6C
SAP ITS 4.6B
SAP ITS 4.6C
SAP J2EE ENGINE 6.30
SAP J2EE ENGINE CORE 6.30
SAP JAVA TECH SERVICES 6.30
SAP JCO 6.30
SAP SOFTW. DELIV. MANAGER 6.30
XI ADAPTER FRAMEWORK 3.0
XI CONNECTIVITY SE 3.0
XI TOOLS 3.0
During Post Installation I had one Technical Systems (XID) and one Business Systems (R3XID), after that I created one more Business Systems (SAPNID).
SAPNID Business Systems Detail
Name: SAPNID
Description:
Administrative Contact:
Business System Role: Application System
Related Integration Server: R3XID
Group: (No Group Assigned)
Transport Targets:
Technical System: XID on crmides Change...
Client: 800 of XID
Logical System Name: SAPNID
Installed Products: SAP R/3, 4.5B XID on crmides
SAP R/3, 4.6C XID on crmides
SAP EXCHANGE INFRASTRUCTURE, SAP EXCHANGEINFRASTRUCTURE 3.0 XID
Software Components: ABC, 1.0 of knack
R/3 CORE 4.5B
SAP ABA 4.6C
SAP ABA 640
SAP APPL 4.6C
SAP BASIC JAVA LIBS 6.30
SAP BASIS 4.6C
SAP BASIS 6.40
SAP GUI FOR WINDOWS 4.5B
SAP GUI FOR WINDOWS 4.6C
SAP GUI FOR WINDOWS 6.20
SAP HR 4.5B
SAP HR 4.6C
SAP ITS 4.6B
SAP ITS 4.6C
SAP J2EE ENGINE 6.30
SAP J2EE ENGINE CORE 6.30
SAP JAVA TECH SERVICES 6.30
SAP JCO 6.30
SAP SOFTW. DELIV. MANAGER 6.30
XI ADAPTER FRAMEWORK 3.0
XI CONNECTIVITY SE 3.0
XI TOOLS 3.0
I do not know whether SAPNID is required or not, earlier I used R3XID as Business Systems at the time of configuration now I changed it to SAPNID. I am getting the same error in both the case.

Unable to Load the Integration scenario into the Integration directory

Hi All,
I am new to using SAP XI.
Require your help on the following issue.
I have built an Integration scenario, added Component Type: Product Version, inserted actions and connections.
I did check for any errors. I found no errors.
When I am trying to load this scenario into the Integration directory its not showing up the scenario in the popup.
Navigation:
Directory > tools> Transfer scenario from repository
The status of Integration Scenario in the builder shows as
"Being processed".
I created the scenario 2 days back.
Can some one help me in this?
Regards,
Meher

Hi All,
Thanks to all who helped me.
michal,divija : Can you please let me know in details how to activate Business Scenario?
I did not create any business process.
Sridhar: I did releases some locks on my process, no luck.
Can you please explain me in more details?
Should I have a process build for my Integration scenario to be activated?
Thanks,
Meher

Integration Directory - Business Scenarios organization

Hi,
In the Integration Directory for configuration, the business scenarios are the highest level for configuring a scenario.
After creating many scenarios, it is becoming hard for me to manage logically related business scenarios. I am resorting to structured naming to keep logically related scenarios grouped together.
Is there a better way that can be suggested ? Is SAP planning for similar grouping concept like software components / versions / namespaces for the configuration aspect too ?
thanks,
Manish

The link ...
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sapportals.km.docs/documents/a1-8-4/sap xi 2.0 customer developments modif. in integration rep.pdf
still works !
Regards,
Homiar.

Create scenario in Integration Directory eroor:java.lang.NullPointerExcept

Dear all,
I have create all thing under software component SAP BW 7: message interfarence and import object rfc, also create integration senario.
now while i am going to create scenario from Integration Directory > select internal communication and enter create getting error:
java.lang.NullPointerException
Internal problem occurred (INTERNAL_PROBLEM)
i have transferd Integaration scenario from IR and than try to do same, got same error,
whats the initial steps for importing Integration Repository design in to Integration Directory?
Best regards,
dushyant.

Hi Dushyant,
Actually it should work...
try first this one
In ID -->First import the Integration Scenario by clicking tolls -->Transfer IS from IR
Then
Click Create Object in ID then you will get the scrren 3 0f 4.5 as per the link...
Then click create ---> and enter the service name (if does not exist it is automatically created)
Then select remaining as required...
Or else...
follow this...
Just Double click the Configuration Scenario under Configuration Objects and Proceed ( No need of Configuration Wizard required) and select your Integration scenario created in IR...
and rest you can create all the remaining steps under the Scenario that you created by following the smae steps...
Regards,
sridhar

How to retrieve configuration scenarios in Integration Directory?

Hi All,
I am developing a Java program to read all configuration scenarios in Integration Directory. My plan is to find SAP's Java APIs available in the NetWeaver Java stack to read the info I need. I have done lots of searches for such the APIs but still got no luck. Could you help me out?
I'm on NetWeaver PI 7.1.
Thanks,
Viet
Edited by: Viet Phan on May 13, 2011 1:11 PM

Hi,
The 3rd party adapters must be installed via Deploy Tool or JSPM. But u should have a sda file with the adpater content.
see here for more details on JSPM
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/5006901f-925c-2910-5f98-9ae26cc07eca
Usually all these third-party developed adapters also developed pre-defined business content with mappings, but this does not mean that all the interfaces you have can use it. If you do not have any custom work, then you can automate it, but if there is custom work then you have to enhance or develop new maps.
For example, Seeburger has over 20 maps to convert EDI X12 to standard IDoc maps and vice-versa (INVOIC Idoc to 4010 etc).
http://service.sap.com/netweaver ->SAP NetWeaver in Detail -> Process Integration -> SAP Exchange Infrastructure ->SAP XI in Detail -> Connectivity.
Please reward points if it helps.
Thanks
Vikranth

Integration Directory Scenario object

Hi,
Can two screnario object exist in Integration Directory.
I had created one scenario for file adapter to idoc and another scenario for SRM.
The file adapter scenario was working ,but when i created SRM scenario the file adapter scenario has stopped working it is not picking XML file from the given location.
Kindly suggest what could be the problem.
Thanks
Monzy

Hi,
After configuring & activating your File adapter,
(if u are @ SP5) Go to http://<hostname>:50000/AdapterFramework/monitor/monitor.jsp
( if u are @ SP9) go to RWB> ComponentMonitoring>AdapterFramework. (Adapters, a new pop up window will appear)
If u have configured your File correctly, u will see a GREEN traffic light there, else you see a RED traffic light.
Hope this helps you.
Regards,
Siva Maranani.

Integration Directory Scenario

Hi all!
I want to create a new scenario in the Integration Directory, without the Wizzard. I only have this wizzard when I select "new Scenario Object".
Right-Klick doesn't work for selecting e.g. "new..."
Any ideas?
How can I create a new scenario, giving a name to it and configurating it later (no wizzard!)??

Hi Steffen,
To create Configuartion Scenarios, in your Integration Directory,
1. Select the SCENARIOS tab.
2.Just Right Click on the existing scenarios and select new.
3. Now , in the window that opens, you will find many options on the Right Side, just make sure Configuration Scenario is selected.
4. Now , the wizard will let u do the rest.
Hope this helps,
regards,
Bhavesh

Activate Integration Scenario for import at Integration Directory

Hello all,
How can i (or is the workaround) activate a message mapping / interface mapping without configured messagemapping at "Display Message Mapping" side? When i try to activate the not already configured message mapping i get following errors: Source message missing, Target message missing, Metadata missing, Mapping not sufficiently defined.
Cause:
First i want to build the frame at Integration Repository for the defined scenario and import at Integration Directory. Later i want to build the message mapping for the scenario.
Many thanks in advanced!
Jochen

Hi,
you cannot activate it without all proper values - sorry
have a look at this blog:
/people/siva.maranani/blog/2005/08/27/modeling-integration-scenario146s-in-xi
Regards,
michal
<a href="/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions">XI / PI FAQ - Frequently Asked Questions</a>

Adapter engine not found in Integration Directory

Hello All,
We are having a new server installation. The problem I am having is in Integratin Directory --> Communication Channel, no option for Adapter Engine is present in the drop down. I have checked the following options:
1) SAP BASIS Component with Adapter Mata data is present in Repository.
2) In SLD, Content Maintenance, class XI Integration Server. There are 3 associated objects (the last column). XI Sub-System viewed application system is also present.
3) The Technical and Business Systems are already created for XI Integration Server in SLD.
I have also suggested the blog /people/venugopalarao.immadisetty/blog/2007/03/15/adapter-engine-cannot-be-found-in-integration-directory , to the Basis team, however the problem still persits.
Kindly suggest how we can resolve the issue and start executing our scenarios.
Regards
Pravesh
Edited by: Pravesh Sharma on Mar 9, 2009 10:11 AM
Edited by: Pravesh Sharma on Mar 9, 2009 10:12 AM

Hello,
I think the BASIS Team has gone through or implemented this OSS note as it is mention in the blog above. However the problem still persists.
Regards
Pravesh

Unable to Delete PI Integration Directory Objects

Hello Experts,
We are facing a strange problem in our system. When we wanted to delete some unwanted objects from Integration Directory from my user, I can't see any more in Object View, however can see in Change List with some X (red) mark before the object.
These objects are still remain and visible to other users in the respective scenarios.
When we try to delete from there, a confirmation pop-up dialog appears stating that data/object will be lost, when confirm (it says it is deleted) but remains in the change list.
We have verified in the object locked list, but there also nothing was locked.
Regards, Alex.

Hi,
You need to activate the change list where the deleted objects are present for the deletion to reflect in the runtime cache.
Also, if these deleted objects have been transported to higher environments, you would need to transport the deleted objects for the deletion to reflect in the higher environments as well.
To do this, when creating the transport, keep the check box "Include deleted objects checked". Then you can select the deleted objects to be included in your transported (deleted objects would be indicated with a bin icon).
Regards

Integration directory is not getting displayed..

Hi Gurus,
Our developers are facing an issue here- they are not able to view the Integration Directory (ID) window with their own ID's as well as PISUPER. They are able to view the same instance ID from a different server. But I'm able to view to ID from my machine. When they key in their login credentials in the integration directory, after which a window will be opened and that they cannot see it.The process and the application keeps running in the windows task manager. Is this sort of a display problem or something?
Any thoughts would be appreciated!
Regards,
Sriram

Hi,
Also make sure they are have JDK1.5 and not any other version installed. Try to delete your temporary Java files on your PCs and do the re-initialization Raj mentioned, and try again. You can also enable Java console from control panel to see where you're getting stuck.
Regards,
Gökhan

Integration Directory configurations for IDOC - XI - File

Hi all,
I have a scenario as above: IDOC-XI-FILE
The IDOCs come from an R/3 system - NHGDDBS01.
I've configured 2 BS:
1) BS_NHGDDBS01
-> TS: NHGDDBS01, type: WebAS ABAP
-> SWCV: BASIS 6.20
2) BS_DEV1_NAUTICUS_OOTS
-> TS: TS_DEV1_NAUTICUS_OOTS, type:Third Party.
-> SWCV: SWCV_DEV1_NAUTICUS_OOTS, type: Third Party
-> PDT: PDT_NAUTICUS_OOTS
With this setup, can someone help me by showing me how to configure the Integration Directory in order to receive IDoc from R/3 (nhgddbs01)?
Please help.
Thanks.
Ron

> This is known issue.....Check the below
> steps.............
>
> Go to XI system ->and IDX1 transaction.. And check
> the port number + RFC destination is given correctly.
> this should point to SAP system ..
> Check thsi RFC destination is having all the entires
> and test connection success
>
> And the port should have the naming convention
> SAP<System Id>.
>
> ........................Check this SAP Note -940313
Hi,
I followed the SAP Note.
The SAP System ID is DV1.
I've configured IDX1 with the following port:
Port: SAPDV1
Client:108
Description: <blank>
RFC_Destination: PI_001 (This RFC destination points to DV1, despite the naming. Connection test is successful)
I recreated metadata on IDX2:
IDoc Types: ZPATINFO
Source Port: SAPDV1
IDoc Types: ZADMINFO
Source Port: SAPDV1
However, when I test the message from R/3 using WE17, SM58 on R/3 it's still showing the error:
Transaction IDX1: Port SAPDV1_108, client 108, RFC Destination error.
May I know where did this error occur and how to rectify this?
Please advise.
Thanks.
Ron

No sender agreement configured in the XI Integration Directory

Hi,
I am using MPA(MML) message format in XI scenario. My scenarios are R3->XI->Marketplace and Marketplace->XI->R3. The first scenario works fine with no problems where as when i try to post MML message from marketplace to XI system, i am seeing the "No sender agreement configured in the XI Integration Directory for the given message header:SenderParty=xxxx; ReceiverParty=; SenderService=xxxxx; ReceiverSerivce=xxx; Interface=xxxx; InterfaceNamespace=xxx;". I have created sender agreement for this secenario, and moreover i haven't this sender agreement in the xi cache. Please let me know if i am missing anything in the configuration.
Thanks & Regards
Sruj

Thanks a lot for replies, but i have tried all these options but no luck. Does it need any additional configurtion to resolve this issue, i dont think this is cache issue, if that is the case after all steps which i have done should have fixed it. Please post your comments.
Once again thanks a lot for everyone.
Thanks & Regards,
Sruj
Message was edited by: Srujan Gogineni

No service for system SAP***, client 001 in Integration Directory

Hi,
We are doing a File to IDOC scenario.
The file is picked up and the idoc is getting generated in XI but this idoc is failing at XI outbound with the following SM58 error:
No service for system SAPABC, client 001 in Integration Directory
where ABC is my XI system ID.
I have searched in sdn and tried all the possible solutions given in the previous blogs with same subject but not able to resolve this error.
Any help will be greatly appreciated.
thanks in advance
Jagruthi

Hi Rao,
please check given link may be useful for you
/people/michal.krawczyk2/blog/2005/03/29/xi-error--unable-to-convert-the-sender-service-to-an-ale-logical-system
No service for system ... in Integration Directory
Regards,
amit

Integration Directory view by scenarios PI 7.1

Similar Messages

Maybe you are looking for