[Integration Engine Configuration Data] Error: No access to system landscap

Hi all,
When configuring Integration Engine Data (To go to 'Integration Engine Configuration Data' screen: Tcode: SXMB_ADM -> Choose: Integration Engine Configuration -> F8), we want to load Configuration from System Lanscape by choose F6, an error occur with message as below:
No access to system landscap
So that we can't load configuration from our System Landscape.
We have correctly configured other below:
     - We use http port for corresponding Integration Server.
     - Business System with role 'Integration Server' created correctly in SLD.
     - T-code SLDCHECK is all OK.
     - T-code SXI_CACHE is all OK.
Anyone can please help me correct this error ?
Point will be reward for any valuable answer,
Thanks a lot,
Vinh Vo

Please can you check if your RFC destination SAPSLDAPI and LCRSAPRFC are working both ABAP and Java stack.
just check the reply from Udo and jai's reply
R3 Connecte XI 3.0 Problem
also check page no 18
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/bd5950ff-0701-0010-a5bc-86d45fd52283

Similar Messages

INTEGRATION ENGINE CONFIGURATION ERROR

Hi all,
I configured integration server through SXMB_ADM,but i'm getting error..
Current Configuration (local):
Role of Business System: Integration Server
Client 000 is Integration Server
Corresponding Integration Server: http://xxx:yyy/sap/xi/engine?type=entry
System Landscape:
Errors No access to system landscape at present
Comparison of Current Configuration with System Landscape
regds,
vasanth.

Hi Vasanth,
You are getting this error because the Pipeline URL parameter defined for the XI Business System in SLD is either empty or different than the one defined in "Integration Engine Configuration" in the TCode: SXMB_ADM.
Check the same. I hope this provides you a solution.
Regards.
Praveen

No access to system landscape at present

Hi
I am trying to establish connectivity between ECC and PI. I am in SXMB_ADM of ECC and under Global Configuration Data, I put the role of business system as Application System. Now when I click on the Systel Landscape, I am getting an error " No access to system landscape at present". How should I solve this?
What do I enter next to corresponding Integ server ?
Regards

Hi,
Check in SLDCHECK, from R/3 side, if everyhting is ok.
You may want to check:
#1143810 - Troubleshooting SLDCHECK - Releases 71X
Second point, check note below to about the components in SLD, if they are correctly registered.
#1334053 - No automatic PI 7.10 SLD Registration
And take into account the following notes mentioned in the note above:
#1117249 - Incomplete Registration of PI components in SLD
#764176 - Error in XI due to inconsistent SLD contents
Last recommendation, open the Exchange Profile and change all parameters that ends in *.name to FQDN, and don't forget to restart the system to activate the changes.
For more information about the FQHN, check the notes below:
#773830 - FQHN determination in ICM
#654982 - URL requirements due to Internet standards
Also ensure to apply the FQHN as per instructions on the note below:
#804124 - HTTP communication with XI Adapter Engine fails
And check for the parameter 'com.sap.aii.connect.integrationserver.sld.name' from note:
#1278563 - Specification of message server host in Exchange Profile
Regards,
Caio Cagnani

ERROR Integration Engine configuration

hi all, i have an error. en sxmb_adm -->Integration Engine configuration y configured next parameters:
rol:Integration Server
corresponding Int. Server: http://<server>:<port>/sap/xi/engine?type=entry
When press in SL buttom, and error occure: No Access to SLD at present.
What should i Do?
Rgds
Message was edited by:
        Rodrigo Pertierra
Message was edited by:
        Rodrigo Pertierra

all RFC ping fine.. when execute TC SLDCHECK i get this:
Properties of RFC destination SAPSLDAPI
RFC host:
%%RFCSERVER%%
program id:      SAPSLDAPI_XD0
gateway host:
gateway service:
Testing the RFC connection to the SLD java client...
RFC ping was successful
SLD server access settings:
host name:   <server>
port number: <port>
user       : sldduser
Use transaction SLDAPICUST if you wish to maintain the SLD server access dat
Launching the SLD GUI in a separate browser window...
=> Verify in the browser GUI that the SLD is in a healthy running state!
Calling function LCR_LIST_BUSINESS_SYSTEMS
Retrieving data from the SLD server...
Function call returned exception code     4
=> Check whether the SLD is running!
Summary: Connection to SLD does not work
=> Check SLD function and configurations
Now checking access to the XI Profile
Properties of RFC destination LCRSAPRFC
RFC host:
%%RFCSERVER%%
program id:      LCRSAPRFC_XD0
gateway host:
<server>
gateway service: sapgw01
Testing the RFC connection to the SLD java client...
RFC ping was successful
Calling function EXCHANGE_PROFILE_GET_PARAMETER
Retrieving data from the XI Profile...
Function call terminated sucessfully
Retrieved value of
section   = Connections
parameter = com.sap.aii.ib.server.connect.webas.r3.ashost
-> value =
Summary: Connection to the XI Profile works correctly
In transaction SXMB_ADM-->Integration engine configuration , when i do a check get this
Current Configuration (local):
@5F@     Role of Business System: Integration Server
@5F@     Client 200 is Integration Server
@8S\QURL@     Corresponding Integration Server: http://<HOST>:<PORT>/sap/xi/engine?type=sender
System Landscape:
@5C\QErrors@     No access to system landscape at present
r
     Comparison of Current Configuration with System Landscape
@5B\QOK@     Role of Business System: Current Configuration = System Landscape
Message was edited by:
        Rodrigo Pertierra
Message was edited by:
        Rodrigo Pertierra

Buffer Table not up to date error while accessing Catalogs

Hello,
I am getting Buffer table not up-to-date error while accessing ARIBA Procurement Catalogs.
Initially, my Test system was pointing to Production Catalogs but now, when I changed the settings in "Define External Web Services" and pointed it to DEV Catalogs, it is failing with error: "Buffer Table not up-to-Date"
Refreshed the Buffer already but still error not fixed.
We already have the similar settings in other systems and there the connections are working fine
Please advise
Regards
Manish Agrawal

Hi Manish,
Could you please check the below notes and implement the same since I had the same issue upon punching out from the catalog to SRM system.
2041631 - Simplified Shopping Cart:Dump on Check Out From Catalog
2086844 - Dump "Buffer table not up-to-date" on Check Out from Catalog
In addition to the above, please maintain the portal information in the path as shown in the below screen shot
Kindly check and let me know on how it goes.
Best Regards,
Bharathi

ICH : SXMB_ADM - F7 Check says "No access to system landscape at present"

Hi
When I perform following :
tcode sxmb_adm -> Integration Engine Configuraion -> Check (F7)
I get "No access to system landscape at present"
This on our ICH-server.
Same check on the PI-server (X) is successful.
The SLD used is the same for both servers. I.e same url-address in "corresponding integration server".
Role of business system for ICH = Application system
Role of business system for PI = Integration server
Anyone that knows how to correct this? Some refresh, cache update or similar that must be performed?
/Regards
Joakim

Hi,
please run transactin sldcheck on the abap to see where the problem is.
Did you :
- run and configure transaction sldapicust
- the rfc connection pointing to the sld server
Kind regards,
Andreas

403 Error during communication with System Landscape Directory from RWB

Hi,
I've got a new install of PI (XI 7.0) SPS 10 and am getting an error whenever I try to access the SLD from RWB or Integration Builder. The SLD is running on the same server as XI.
I've been through the various config guides (strangely there doesnt seem to be one specifically for PI/XI 7.0), to configure RFC destinations, checked users are not locked etc.
I'm thinking it's probably a VA / Authorisations issue, but could use some ideas!
Here's a few errors just for reference (and future people searching!)
<i>
Error during communication with System Landscape Directory: HTTP response code: 403 (Forbidden)
Unable to read XI domain from the SLD. Monitoring cannot therefore be configured. Error message: com.sap.aii.rwb.exceptions.BuildLandscapeException: Error during communication with System Landscape Directory: HTTP response code: 403 (Forbidden)
No System Landscape Directory exists. Unable to generate the landscape
Unable to read software component versions from System Landscape Directory "my.server:51400" (have tried 8014 also)
</i>
Thanks,
James.

Hi,
1) Activated all services
2)Go to SU01 > type PIISUSER and reset the user's pw
Check out this might be helpful
http://help.sap.com/saphelp_nw04/helpdata/en/89/05793c05f0807be10000000a11405a/content.htm
403 ERROR
Check this note might help you 961880
Regards
Agasthuri Doss

Error during communication with System Landscape Directory: HTTP response c

Dear all,
I have redirected a SLD to our Q system. Everything in the Repository is working fine. What did I do:
- Adjusted settings in SLDAPICUST
- Adjusted SAPSLDAPI
- Adjusted LCRSAPRFC
- Adjusted the following values in the Exchange Profile:
com.sap.aii.connect.cr.httpport
com.sap.aii.connect.cr.name
com.sap.aii.connect.landscape.httpport
com.sap.aii.connect.landscape.name
So, SLDCHECK works fine.
The Repository sees the right SLD.
However, in the Directory I cannot choose an Adapter Engine (leaves blank) in my comm. channel.
Then I went to the RWB and got the following message:
<b>Error during communication with System Landscape Directory: HTTP response code: 403 Forbidden</b>
Where can I change something to make this work? Is this a user verification problem?
Thanks in advance for your input.

go through the notes :-
#764176 Error in XI due to inconsistent SLD contents
#720717 Reduce the number of System Landscape Directories
Regards
Kenny

SXMB_ADM settings in Integration engine Configuration

Hi , with reference to the blog
How do you activate ABAP Proxies?
--- refer to the step ---2 Configuration Business system as local Integration Engine.
1. Goto Transaction SXMB_ADM
2. Choose Edit --> Change Global Configuration Data.
3. Select Role of Business System: Application system
4. Corresponding Integration server: dest://<HTTPDESTINATION>. Here <HTTPDESTINATION> SAPISU_XID created in step 1. Dest://SAPISU_XID.
Now if I do this step., then IDX5 will no more work,, rather weo2/o5 will start working.....is this ok,, i mean changing the Role of Business System = Integration server to Application system??, the usage of IDx5 will cease to exist,
Arnab

Hi,
oh i am sorry, you mean to say, as per blog,
How do you activate ABAP Proxies?
am I was supposed to do this setting for SXMB_ADM in r3 , not in XI.....is this what you meant??
Also , with reference to the above link, while creating the HTTP connection, it is giving a popup messehe, HTTP connection may not be secure.....what can be the problem due to this due to insecurity!!
Thanks in advancee!!
Edited by: Arnab Mondal on Sep 25, 2008 1:32 PM

6.40 J2EE Engine Configuration Data

How can 6.40 J2EE Engine Configuration be accessed externally by 3rd party software?
The 6.20 J2EE engine allowed all configuration data, cluster setup, servers, dispatchers etc. to be exported as an XML file. With the 6.40 J2EE Engine all data is stored in the database. In the configtool, there is an option to export unsaved changes to XML, but this only appears to export Secure Store Data. Can this secure store data be used to connect directly to the database from external application in order to read configuration setup.
Many thanks.

Thanks for the reply.
Basically, I just want to able to read the j2EE Engine configuration, i.e. how many instances, what are they called, how they are configured, how many dispatchers, servers etc.... The config.xml file that could be generated from the configtool of the 6.20 J2ee engine contained all the information that I needed, but this xml file is now no longer available with 6.40.
Best regards,
Eoin

Book Configuration Data error

I was playing a game yesterday and it suddenly went into a black screen. Ctrl + Alt + Delete didn't work so I tried Alt + F4 and that didn't work either. I force powered off and when I tried to use it today a blue screen came up saying:
[Recovery
Your PC needs to be repaired
The Boot Configuration Data file is missing some required information.
File: \BCD
Error code: 0xc0000034
You'll need to use the recovery tools on your installation media. If you don't have any installation media (like a disc or USB device), contact your system administrator or PC manufacturer.
Press Esc for UEFI Firmware Settings]
When I press Esc a black screen comes up saying this:
[Startup Menu
F1 System Information
F2 System Diagnostics
F9 Boot Device Options
F10 BIOS Setup
F11 System Recovery
ENTER - Continue Startup
For more information, please visit: www.hp.com/go/techcenter/startup]
Whenever I try F11 it goes to a black screen and then it goes back to the first blue screen. Please help! I'd rather not have to replace my entire hard drive.

I forgot to mention that my hard drive failed the quick test I ran (perhaps because of the bootup issue?).

Integrating SAP HCM with third party Access Control System

Hi Experts,
We have client using SAP HCM and intend procuring an Access Control Solution to manage her people.
What the client wants to avoid though is having to create a new employee in SAP HCM and manually creating same in the Access Control Software. Is there a way this can be automated such that upon recruitment of new staff, the data is updated in the Access Control DB which uses MS SQL? If this is possible, what is required to get this working well.
Thanks for your support in this regard.
Regards
John

For time management with the help of transaction pt80 you can download the information about employees with the help of idoc. And there are some programs a.k.a connectors that link access control systems and SAP so that you do not hire the same employee in the access control problem. You hire the employee in SAP and SAP sends the information (HR Minimaster DATA) to the related program.
It is also do the same thing for the employees who resign. I mean if an employee is fired or resigned from the company than it is sent to the related system.
These can be found under PDC integrated systems. You can find information about the systems from Ecohub. http://ecohub.sap.com/
I hope this answer will help.

Process to migrate configuration data from one BW development system to other

Hi SAP Gurus,
We need to migrate configuration data from one BW system DE1 to DE2.. Both systems are SAP net weaver 7.3.
DE1 is BW pre-production system and DE2 is BW DEV.
No transactional data required.
Please share a document if available.
Kindly, let me know the procedure for Remote Client copy or client export/import with steps.
Also let me know the pre-requisite for these activities.
Thanks,
Avadhesh Sharma
+91 8095226536

Hi,
Remote Client Copy (SCC9)
Remote client copy is performed in rare situation. When the client copy is done
between two different SAP systems, the copy is called remote client copy.
Before remote client copy is performed, a RFC connection must be set between those
systems using SM59.
1. Check RFC connection is working fine between two systems you want to perform
remote client copy using SM59
2. create client in the target system you want to copy the client
3. login to target client using user SAP* and password PASS
4. execute tcode SCC9 and select the RFC for the source system
5. select the profile you want to copy like SAP_ALL
6. select source client number you want to copy
7. Select source client master data , mostly it is the same client number
8. Now click on schedule as background job.
9. Leave the background server field blank.
10. Click schedule.
11. Select Immediate from next screen.
12. Save the screen.
13. Client copy is scheduled now as a background job and client copy process started.
14. The progress can be monitored using tcode SCC3
Client Export/Import
A client transport consists of two steps:
First a client export extracts client data from the source client
to files at the operating system level. Then the data is imported
from the operating system files into the target client.
To perform a client export, follow these steps:
1. Log on to the source client. From the SAP initial screen,
choose transaction SCC8 (Client Export). Select the data to
be copied using a profile.
2. Indicate the target system to which the client will be copied.
The target system must be defined in TMS as part of the
transport domain.
3. Begin the client export. Because copying is a lengthy
process, use scheduled background processing.
Do not run any other client copy tool before the
data export is finished.
This export process will generate up to three data files at the
operating system level:
• RO< number >: this file contains cross-client data
• RT< number >: this file contains client-specific data
• RX< number >: this file contains SAPscript texts
Depending on the type of data selected through the client
transport profile, the client copy command files added to the
buffer of the target system are as follows:
• <S-SID>KO<number>: this file is for cross-client data
• <S-SID>KT<number>: this file is for client-specific data
• <S-SID>KX<number>: this file is SAPscript texts
The client export change requests are not imported when an
Import all takes place. Therefore, you must import these requests into the target client
using TMS. Choose one of the transport requests of the client transport in the Transport
Management System (TMS). The other transport requests belonging to this client
transport are then automatically added in the correct order.
After the import process has completed, post-import activities are required for object
generation steps. After completing the import, log on to the target client. From the SAP
systems initial screen, choose transaction SCC7
Regards,
Chandu

Integration Engine Proxy Runtime Error

Hello,
I have ECC and PI server for my landsacpe. When i ran SXMB_IFR tcode in my ECC server i got the follwing error under Runtime work Bench
Proxy Runtime - it is shows red color.
Unable to log on to system ECC120 in language en with user PIRWBUSER
Details for Ping Status
Message: Unable to log on to system ECD210 in language en with user PIRWBUSER
Stacktrace:
com.sap.aii.rwb.exceptions.OperationFailedException: Unable to log on to system ECD210 in language en with user PIRWBUSER
at com.sap.aii.rwb.core.XIAbapRTCComponent.getConnector(XIAbapRTCComponent.java:114)
at com.sap.aii.rwb.core.XIRTCComponent.ping(XIRTCComponent.java:209)
at com.sap.aii.rwb.web.componentmonitoring.model.CompTestModel.doPing(CompTestModel.java:581)
at com.sap.aii.rwb.web.componentmonitoring.viewcontroller.CmDynPage.doPing(CmDynPage.java:425)
at com.sap.aii.rwb.web.componentmonitoring.viewcontroller.CmDynPage.updateTests(CmDynPage.java:525)
at com.sap.aii.rwb.web.componentmonitoring.viewcontroller.CmDynPage.selectNode(CmDynPage.java:552)
at com.sap.aii.rwb.web.componentmonitoring.viewcontroller.CmDynPage.process_treeClick(CmDynPage.java:481)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:324)
at com.sapportals.htmlb.page.DynPage.doProcessCurrentEvent(DynPage.java:172)
at com.sapportals.htmlb.page.PageProcessor.handleRequest(PageProcessor.java:115)
at com.sapportals.htmlb.page.PageProcessorServlet.handleRequest(PageProcessorServlet.java:62)
at com.sapportals.htmlb.page.PageProcessorServlet.doPost(PageProcessorServlet.java:22)
at com.sap.aii.rwb.web.componentmonitoring.viewcontroller.CmPageProcessor.doPost(CmPageProcessor.java:35)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sap.engine.services.servlets_jsp.server.runtime.RequestDispatcherImpl.doWork(RequestDispatcherImpl.java:321)
at com.sap.engine.services.servlets_jsp.server.runtime.RequestDispatcherImpl.forward(RequestDispatcherImpl.java:377)
at jsp_FC_Secure1229621978943._jspService(jsp_FC_Secure1229621978943.java:15)
at com.sap.engine.services.servlets_jsp.server.jsp.JspBase.service(JspBase.java:112)
at com.sap.engine.services.servlets_jsp.server.servlet.JSPServlet.service(JSPServlet.java:566)
at com.sap.engine.services.servlets_jsp.server.servlet.JSPServlet.service(JSPServlet.java:190)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039)
at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
at java.security.AccessController.doPrivileged(Native Method)
at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:102)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:172)
When i checked my PIRWBUSER password in abap and poratal level there is no conflicts. Password is correct.
For integration i have created three RFC also
LCRSAPRFC,SLDAPIRFC,SAPJ2EE all these RFC are working fine and there is no error.
Can any one suggest me how to resolve this issue.
I am waiting for your reply.
Regards,
Sankaranarayanan.G
BASIS CONSULTANT

Hi Tuhin,
I have one more problem now. Intially i have configured my PI development portal.But after some days in my PI server when i ran SXMB_IFR is detecting wrong poral now. I have tried to change from my EXCHANGE Profile under integratrion server parameters i have changed PORT,URL and others.
but it is not come to effect. can you please help me where do i need to chage the portal?
I am waiting for your reply.
Regards,
Sankar.G

We couldn't refresh the connection 'OData Assignements Data' Error : While access the project overveiw report in brower and in Excel 2013.

Hello All,
Facing this issue while opening the ProjectOverview report in Browers or in Excel 2013.
Snapshot is attached for furthur reference.
Error in Excel when clicking on Refresh All, it shows the information to retieving the data but after few moments it prompt this error.
Second snapshot occurs while opening the report in browser.
Kindly help.
REGARDS DANISH DANIE

Dear Paul,
1st Query,
Ans: As I'm using Project Server Permission mode and im logged with the user who is the member of admin group and in administrator group 'Access
Project Server Reporting Service' is ticked on. So, the concern regarding permission is resolved.
2nd Query,
Ans: Im unable to find Project Web App Permission for Excel Web App Refresh' feature in site setting
of PWA.
Snapshot is attached when trying to open report in browser.
to resolve this followed below mentioned URL but unsuccessfull result
http://support.microsoft.com/kb/2769345/en-us
Still facing same issue, issue is not resolved kindly help/suggest.
Note: Im using Project Server 2013 not Project Online 2013.

[Integration Engine Configuration Data] Error: No access to system landscap

Similar Messages

Maybe you are looking for