Integration Engine Message Id in ABAP Proxy

Hi,
I have a scenario sending to XI from CRM using an ABAP Proxy.
I need to get the message id generated in the local Integration Engine when a message is sent via the ABAP Proxy or received into the ABAP Proxy.
I see there is a way of doing this in XI and also thought I had found a way of getting it in the proxy in CRM but this does not seem to work correctly even though i can see the message ID being created in the proxy call to XI.
I am trying to get the message id immediately after the proxy call to XI.
Kind regards
Colin.

Hi Colin,
as far as I know, it is possible. Have a look at the online help on abap proxies and check out the determination of message id:
http://help.sap.com/saphelp_nw04/helpdata/en/a1/082589fc4246f09793039d5fb01a17/content.htm
Hope that helps,
regards, jaime

Similar Messages

Adapter specific message attributes in ABAP proxy

Dear all,
i have a short question. I have a file to ABAP server proxy scenario. When picking up the file i write communication data from the adapter in the message header using dynamic configuration and route the message to a abap proxy.
My question is: Do i have access to the header data in the proxy, or do I have to make a message mapping and put the header data into the payload of the message?
Kind regards
Florian

Hi,
here is a blog about your scenario:
File to R/3 via ABAP Proxy
Hope it helps.
Regards
Patrick

Fault message in asynchronous ABAP Proxy

Hi,
I have a question about fault messages in asynchronous ABAP proxy server.
The configured scenario is SOAP XI ABAP Proxy. Between XI and the ABAP Proxy I have configured an inbound asynchronous interface with a fault message, and then I have generated all the classes and implemented some code for exception handling in the ABAP Proxy side successfully.
When I tested negative cases, the exception raises and it is visible in the SXMB_MONI transaction in the R/3 side, but this exception is not displayed in the SXMB_MONI of XI it just displays a successful delivery to the ABAP Proxy message.
According the XI documentation it says <i>In the asynchronous case, you can see a fault message in the monitoring of the Exchange Infrastructure.</i> But this is not working.
Am I missing something?

Hi,
This parameters are form group RUNTIME.
Please check it:
http://help.sap.com/saphelp_nw04/helpdata/en/d6/49543b1e49bc1fe10000000a114084/content.htm
Regards,
Wojciech

Message Monitoring Tool in RWB for Integration Engine Messages not working

Hi all
We currently work on a Pi 7.11 system. I f we start the runtime workbench and going to the message monitoring, we want to get in to a message in the integration engine. Normaly we should get the same sxi_monitor in the web browser, but we only get the soap envelope. The pipeline steps on the left side and also the payload cannot be seen.
We increased the rights of the user to sap_all but this did not changed anything. We also implemented the J2EE monitoring rule.
Seems to me as we forgot a setting after installation, but which??
Thanks in advance for your help.
Oliver

Hi Oliver,
I work on PI 7.0 and I know it's very different from 7.1x releases, but your problem sounds like a similar "problem" on 7.0.
Is your message sycronous? At PI 7.0 the default configuration is defined to remove the payload of sync messages. You can change it on JAVA Visual Administrator.
Try to find this parameter in Java Visual Administrator and set it to "false", below you will find the PI 7.0 path to this:
Server >> Services >> SAP XI AF Messaging >> messaging.syncMessageRemover.removeBody
I hope it helps,
Marcelo Vieira

Is EOIO messaging possible using ABAP Proxy in WAS 620?

Hello,
I am trying to implement an outbound EOIO interface using ABAP Proxy on a SAP R/3 470 running on WAS 620. We have XI 3.0 running on WAS 640. I followed the SAP documentation available at http://help.sap.com/saphelp_nw04/helpdata/en/c9/74246d8ad2447799063d39013e9a11/frameset.htm
I find that the interface IF_WSPROTOCOL_ASYNC_MESSAGING required in this exaple does not exist in our R/3 system. I also notice that proxy classes generated on WAS 640 have the superclass of CL_PROXY_BASIS. But the proxy object generated in WAS 620 have no superclass at all.
Does anybody know how I can get EOIO interfaces to work on the WAS 620? Did you use these objects? Can I import / install them somehow? Or, is EOIO just not possible in WAS 620?
Please let me know.
Regards
Cerish Chemparathy

HI,
have a look at this link to the ABAP Proxy Runtime based on WAS 6.20 (Xi 2.0) http://help.sap.com/saphelp_xi20sr1/helpdata/en/02/265c3cf311070ae10000000a114084/content.htm
There is a help entry called Guatanteeing the Order of Asynchronous Messages. Seems that you somehow can set a queue id for this messages and as long as theses messages are all in the same queue, the order will be maintained.
Your observations are right, there are differences between the Proxy Runtime in WAS 6.20 and in WAS 6.40 and as far as i know, there is no way to downport the 6.40 runtime to 6.20. You will need to stick with wath 6.20 offers.
Regards
Christine

ICM_HTTP_CONNECTION_FAILED message in SM59 (ABAP Proxy Connection)

Hi All,
Recently, i got a problem with our XI server, suddently the ABAP proxy connectiont to XI from another SAP server was failed. i was check from sm59 the HTTP connection return me ICM_HTTP_CONNECTION_FAILED.
i already check the port and calling this link http://demokl:8001/sap/XI/engine?type=entry from the other server it is working fine. but still got problem from SM59.
Please help.
Regards
Fernand

Hi jagadish,
These are my parameters :
Connection Type = (H) HTTP Connection to ABAP System
Target host = demokl (hostname)
Path Prefix = /sap/XI/engine?type=entry
Service       = 8001
Language   = EN
Client        = 300
User          = PIAPPLUSER
Previously was working fine, but suddently go problem. but i was trying to create HTTP connection from XI Box itself it is working fine but from others box didn't work.
i have check the port it is open.
Please help
Regards
Fernand

Message Send from ABAP Proxy implemented in XI Server ABAP Stack

Hello everyone,
I have a question and I'm not sure of this is an ABAP question but I'll try here and try to find some information on ABAP forums and weblogs, I need to send a XML message to the XI pipeline from an ABAP Server Proxy implemented in the same XI ABAP Stack Server, why I need this? well actually I can't find a way to do it in a BPM so I'm going to try to set the logic for this message send in the ABAP Stack, so do you know like a Function Module so I can send a message to the pipeline but I need the message to be set as Scheduled, I'll try ABAP Forums and Weblogs too, thanks in advance.
regards,
julio

Hi
You can schedule your program as a background Job SM36. Please check the transaction. You will have to set your ABAP program as the job STEP (if you probably have selection screen for your report then you will also need a variant for your report).
Do schedule your program as a 'Periodic Job' and your personal period (daily/hourly).
After you save your settings you can also monitor your job (ABAP Program) from the same transaction or even from CCMS if you like.
Thanks
Gaurav

Finding messages sent through ABAP proxy in the source system

Hi All,
I have a Proxy to HTTP scenario, wherein the messages are landing up in error at reciever for some value in the payload.
I tried to look for the messages in XI, hwever they have been successful thru it and are deleted now.
Also I tried to look for the messages in the sender R/3 system in SXI_MONITOR, hwever i dont have the access to this tcode there.
Is there any other way these messages can be looked for in the R/3 system?
Regards,
Diptee

Hi All,
I could not find the messages in the source system, they seem to have got deleted (as they are old).
Also i was trying to achieve the requried in the production environment, and so needed to know if the messages can be looked for by any means other than the report 'Monitor for Processes XML messages'.
Thanks a lot.
regards,
Diptee

Problem in XML Message creation using ABAP Proxy

Hi,
I am trying to send the data from ECC to CRM when post goods issue is done for a delivery from ECC side using ABP Proxy. I called my proxy method in BADI : DELIVERY_PUBLISH.
And after calling the method, I used commit work also.
But the problem is, some times it is working fine. and some times the XML messages are not getting created. When I go in debug, looks everything is fine.
I am unable to understand why this inconsistency.
Could you please help me out, do I need to take any more precautions.
Thanks,
Sandeep

Hi,
There is no problem in the proxy. Some small problem in the database update.
It is solved.
cheers
san

Using of Integration Scenario in a Abap Proxy to JDBC receiver synchronous

Hi ,
Can any one help me out how to go about for creating Integraion scenario in ESR as i'm new to the use of Integration scenario..
its an Abap proxy to Jdbc synchronous scenario... kindly help in this regards.

Hi Indudhar,
Right click on the namespace where you want to create the IS and say new, Select process integration scenario option, give a suitable name and say OK.
In the Component View section right click on the first grey column and Insert a sender Application component. Enter ur product and the software component version. Like wise in the next grey column enter the target Application component.
Now go to the top level menu and click on view and select grid.
Now right click on each App. component and insert the created actions. If the scenario is sync then the actions will be side by side otherwise the target one will be in the next grid of the target app. component.
After entering the actions click on the source action then press shift and click on the target action, right click and choose create connection between the two actions.
Fill in the info and then save.
Regards,
Anshul

ABAP Proxy Acknowledgments

Hi,
I have an integration process that receives Asyn ABAP Proxy messages from R3.
After some processing the process sends back an acknowledgment to the message (positive or negative).
I would like that messages that received an negative ack, appear in R3 Monitor with a red flag, so i can restart them.
However, all messages appear successfully processed independently the type acknowledgment sent.
Is there any thing i should do in ABAP when i'm calling the proxy?
Tks.
Jose

I believe i have to call this method SET_ACKNOWLEDGMENT_REQUESTED , when calling the proxy.
However i believe there is no such method in SAP R3 (620).
If i can't get Acknowledgments working I will try another solution, like calling a proxy with message GUID and Status. The problem is that i can't find a way to change the message status in R3, and i really need it to restart errors.
Anyone can give me a solution?

RWB - Component Monitoring - Integration Engines = none ???

Hi.
I made a Business System in SLD.
Name: DEV_410
Role: Application System
Related Integration Server: XHD_100       (XI Server)
Technical System: DEV on dev60           (type: Web AS ABAP)
Client: 410 of DEV
Logical System Name: HMXDEV410
But I cant see the business system in RWB - Component Monitoring - Integration Engines. There shoud be 'Proxy Runtime DEV_410' in Integration Engines, I think.
Is there any wrong in SLD or RWB?
Thanks in advance.
sjyoon.

Hi
Go to SLD select your business system :DEV_410
And check the following entries for your business system
Role:   Application Server
Related Integration Server : (Check if this value correctly configured to your Integration Server client)
If this configuration is correct, this means XIRWBUSER is able to connect to the proxy runtime of application systems(DEV_410). Then there will be no entries displayed under RWB - Component Monitoring - Integration Engines in RWB.( that is how my RWB component monitoring is configured)
Only error entries are displayed under RWB - Component Monitoring - Integration Engines in RWB. Say for example XIRWBUSER is not able to connect to the proxy runtime of application systems(DEV_410). Then you see a entry in RED below your RWB - Component Monitoring - Integration Engines
Satish

Interaction between Qout scheduler and Integration engine

Hello,
I would like to understand more about the XI 3 architecture regarding the place of qRFC. If I understood right, depending on the QOS, the qOUT scheduler is used to send XML documents comming from the Integration Engine. The qOUT scheduler is able to process and queue rfc calls using traditional RFC ports (for example in case of CIF for APO). I imagine that in the case of XML message shipping, the qOUT scheduler is called by the Integration Engine messaging logic layer. But then, I don't understand how outgoing SOAP calls occure. Are the queued RFC calls in destination of the local SOAP framework which uses the ICM to talk SOAP with the partner?
Thanks for your lights,
Christian.

Thanks Holger for youor quick and precise answer,
You mean, that the connection between the adapter framework and the integration engine is pure rfc based and not Soap-based XI protocol ?
Is XI protocol used between the two engines each time no qRFC is envolved and in this case, the Abap-based Soap framework and the ICM are used by the integration logic layer of the central integration engine to communicate with the adapter engine ?
Thanks,
Christian.

1:n Message split and Abap Proxies??

Hello,
Can I not use Message split and Abap Proxy together? My scenario is MDM->File ->XI->Proxy->BI.
I am getting a single file syndicated from MDM and in XI If I use message mapping to do 1:n split in the message mapping, can I use it with Abap Proxies? As per the link below, XI adapter is not present in the list..We are on PI 7.0 SP14. Thank you..
http://help.sap.com/saphelp_nw04/helpdata/en/42/ed364cf8593eebe10000000a1553f7/frameset.htm
Thank you for any suggestion..

Hi Thanujja,
If you see the message from Raj, I dont think we can split the messages for the proxy. This is beacause the splitting of messages take place at the Adapter Level only for the adapters on the Java stack.
As suggested by Guru, you can try splitting the messages in the inbound proxy instead of using a BPM, in that way you can acheive good performance.
Thanks,
Srini
Edited by: srinivas kapu on Mar 27, 2008 9:09 AM
Edited by: srinivas kapu on Mar 27, 2008 9:10 AM

Forwarding Application Error in ABAP Proxy to CCMS

Hi,
We are using fault messages for inbound ABAP proxy interfaces to capture application errors, and we can see the error in the monitoring of ECC. However, Is there a way, we can forward it to CCMS of ECC (and not XI), because we want to use an external tool linked to CCMS via SOLMAN to get alerted in case of application errors.
Best regards,
Rahul Kumar

Is there a way of getting the above thing done? I have a very similar Issue.
Rahul if you have found out a way of doing the same please let me know by email. [email protected]
Thanks,
Karthik

Integration Engine Message Id in ABAP Proxy

Similar Messages

Maybe you are looking for