Integration: how to best access and run SAP through Portal

We are currently using Oracle Portal for publishing reports directly from our EDW, for giving access to some applications and for delivering unstructured information.
In the future we are very likely to give our suppliers and employees access to reports and interfaces for conducting transactions straight into SAP. This is most likely done via a web GUI.
One way to do this of course is to implement the SAP Portals solution, the other is to keep using Oracle Portal and access SAP Portlets/iViews from there - the latter is to be preferred based on the cost of switching platforms, but we have also to take into account the cost of integration.
So to my question: What would be the best way to integrate these to systems? Has it been done before? Is Web Services the way to go? ???????

Ajax is a microsoft toolkit that the web site is using and is not compatible with Safari. They only support I.E. and windows.
From the Safari menu bar click Safari / Preferences then select the Advanced tab. Enable the Develop menu. In the Develop menu select User Agent and then try Internet Explorer 9.

Similar Messages

As a stockholder, I would like see the development of iTV with Retina display and integrating Siri control, internet access, and iTunes apps. This new product would be a large screen, thin wall mounted television, much like a oversided iPad.

As a stockholder, I would like see the development of iTV with Retina display and integrating Siri control, internet access, and iTunes apps. This new product would be a large screen, thin wall mounted television, much like a oversided iPad.
Do you think this product is possible?

In general theory, one now has the Edit button for their posts, until someone/anyone Replies to it. I've had Edit available for weeks, as opposed to the old forum's ~ 30 mins.
That, however, is in theory. I've posted, and immediately seen something that needed editing, only to find NO Replies, yet the Edit button is no longer available, only seconds later. Still, in that same thread, I'd have the Edit button from older posts, to which there had also been no Replies even after several days/weeks. Found one that had to be over a month old, and Edit was still there.
Do not know the why/how of this behavior. At first, I thought that maybe there WAS a Reply, that "ate" my Edit button, but had not Refreshed on my screen. Refresh still showed no Replies, just no Edit either. In those cases, I just Reply and mention the [Edit].
Also, it seems that the buttons get very scrambled at times, and Refresh does not always clear that up. I end up clicking where I "think" the right button should be and hope for the best. Seems that when the buttons do bunch up they can appear at random around the page, often three atop one another, and maybe one way the heck out in left-field.
While I'm on a role, it would be nice to be able to switch between Flattened and Threaded Views on the fly. Each has a use, and having to go to Options and then come back down to the thread is a very slow process. Jive is probably incapable of this, but I can dream.
Hunt

I have moved from a G5 Powermac to an Intel Mac Pro and am porting over Items from a Backup HDD. How can I access and use drawings and documents created on the PC computer on the Intel computer ?

I have moved from a G5 Powermac to an Intel Mac Pro and selectively porting over items from a backup hard drive.
How can I access and use documents and drawings created on the PC based computer ?

Clarisworks, you need Appleworks, which will only work with Mac OS X10.6.8 or earlier. See this tip if you must go newer. Mac Pros with newer hardware configuration than July 20, 2011 can't use Mac OS X 10.6.8 or earlier without this tip and then it would be Mac OS X Server. I'm not sure if the new black Mac Pro supports that configuration or not.
iPhoto, there is an iPhoto for all versions of Mac OS X.
iTunes, there is an iTunes for all versions of Mac OS X. Note with iTunes versions 11 and later, which are needed for syncing with iOS 7 or or later, you will lose coverflow, if you liked that feature. Sadly you can't run an older version of iTunes from within Mac OS X 10.9 or later.
Sketchup: http://help.sketchup.com/en/article/60107 shows the versions that will work with intermediate Mac OS X versions, and this shows the latest version: http://help.sketchup.com/en/article/36208 be sure to click on the operating system you choose to use.
GIF - Viewing GIFs Apple's Preview can do that. Editing them, I like http://www.lemkesoft.com/ Graphicconverter.
DMG is able to be opened by all versions of Mac OS X. This are just "disk images" which store programs on a virtual disk that will open when double clicked. Frequently you'll find the installer of the said program inside. To find out if the program itself is compatible with 10.7 through 10.9, see http://www.roaringapps.com/
Otherwise see the resources on:
https://discussions.apple.com/docs/DOC-2455
If you end up deciding to stick with Snow Leopard.

How can I download and Install SAP Netweaver Development Studio 7.2

Hi All,
How can I download and Install SAP Netweaver Development Studio 7.2 ?

Hi yozi66,
Thanks for your feedback.
If you have any problems, welcome to ask in TechNet Forum.
Best regards,
Fangzhou CHEN
Fangzhou CHEN
TechNet Community Support

How to manage pulp and paper processing through SAP

Hi...
please let me know how to manage pulp and paper processing through SAP-PP in details......
or please provide sum links where i can get the solution....
regards,
sandeep.

Hi Ema,
you need to ensure in your BAdi implementation that the records do not overlap. Ideally (for performance reasons) you also keep the number of records in RPM_BUPA_AVL low
i.e. one record for 01.Jan to 05 Jan with 8 hours is better compared to 5 records with 8 hours each.
Best regards
Thorsten

How do I access and use my Itunes library from a different/new computer?

How do I access and use my Itunes library from a different/new computer? My computer is no longer working, so I need to be able to access my library from my wife's computer.

Your library will only be where you put it. Copy everything from your backup copy of your old computer to the new one.
You can redownload some itunes purchases in some countries:
Download past purchases - Apple Support

How do I access and use my iTunes library on a different computer?

How do I access and use my i Tunes library on a different computer?

The iTunes library is only where the user puts it. If desired to have on an additional computer, put it there by copying the ENTIRE iTunes folder from the existing computer to the new computer.

I've downloaded CS6 Master Collection but only see The Photoshop icon. I can't seem to find the other programs, except on "uninstall programs" How do I open and run the others?

I've downloaded CS6 Master Collection but only see The Photoshop icon. I can't seem to find the other programs, except on "uninstall programs" How do I open and run the others?

How about you give us some real information.
Did you install the software? What operating system?

How can I access and use the alphabetical keyboard of the phone ?

How can I access and use the alphabetical keyboard of the phone ? I cannot find the answer in the manual of use. Thanks for your help !

Recently I was abroad and tried to contact my voicemail to check my messages. I was asked to enter a password and did not know how to use the letters below the figures on the keyboard. I had to give up and wait until I was back in my country (no password is then needed).

Does my macbook air have a built in virus scan? how can I access and use it? also any recommendations of what software if this is not avail ?

does my macbook air have a built in virus scan? how can I access and use it? also any recommendations of what software if this is not avail ?

Contrary to what Geeks on Hugs is telling you, Mac OS X does indeed have a basic malware scanner. It is not a feature that is directly accessible to the user, and works a bit differently than every other malware scanner out there. Gatekeeper, which has been mentioned here, is entirely separate, and provides a different method for helping to protect you against malware.
The anti-malware scanner in Mac OS X is called XProtect. When you download an application (or any other kind of executable code), it is automatically "quarantined," so that when you open it you're asked if you really want to do that. I'm sure you're very familiar with this aspect of Mac OS X if you have ever downloaded any apps from outside the App Store. What you don't know, though, is that each time you try to open a new app, that app is checked by XProtect. If it is identified as malware, you will not be allowed to open it, and will be warned that it's malware.
At this time, there is no known malware that can infect a properly up-to-date Mac. All current malware will be blocked by one or more methods.
For more information, see my Mac Malware Guide.
(Fair disclosure: I may receive compensation from links to my sites, TheSafeMac.com and AdwareMedic.com.)

How do I access and delete photos from Photo Stream

I am using Yosemite 10.10.3. Apple TV (3rd gen) screen saver shows older photos that I have deleted from the photos program but are apparently still in Photo Stream. How do I access and delete these from Photo Stream?
Thanks

Hello winim64,
After reviewing your post, it sounds like you want to delete photos from My Photo Stream. I would recommend that you read this article, it may be able to help the issue.
Delete photos from My Photo Stream - Apple Support
Thanks for using Apple Support Communities.
Have a nice day,
Mario

How can I install and run a Windows program on my MacBook Pro/?

How can I install and run a Windows program on my MacBook Pro?

You have several options.
1, Use a Virtual Machine like Vmware, Parallels etc... to Create a Virtual Windows Installation and Run your program in there. A Virtual MAchine will runn in a Window on your Desktop and share your Mac's resources RAM HD space processor. Your MAc desktop will still be available while you run Windows install.
http://www.parallels.com/
2. Install Windows on a partition using Bootcamp. It will run a full installation of Windows you can boot into, and run your programs. The Mac desktop will not available until your reboot the computer and start in OSx instead of Windows.
https://www.apple.com/support/bootcamp/
3. Use Wine / Winebottler to run the Application without the need for a complete Windows installation.
http://winebottler.kronenberg.org/

How can i access and assign java xml Document variable in javascript block

How can i access and assign org.w3c.dom.Document variable in javascript block
I tried this xmlDoc = "<%=xmldoc%>";
it is not working
plz give me solution.
thanx
Vidya

The solution would only work on MS IE browsers, as other browsers do not support an XML DOM.
It can be done, but you would be stuck with using the Microsoft broswer. If that is acceptable, I have some example code, and a book recommendation.

How can I install and run lookout 6.1 on windows server 2008 64-bit without errors?

How can I install and run lookout 6.1 on windows server 2008 64-bit without any errors?
I was unable to start the lookout applcation after I install the lookout 6.1 on windows server 2008 64-bit.
(error code: 0xC0000142). Please help!
Thanks

This will pobably do http://joule.ni.com/nidu/cds/view/p/id/1051/lang/en but the major issue is that you should concentrate and read the instructions carefully. My two cents.
Dieet
Afvallen

How can I download and run adobe 11.5 on mac OSX 10.5.8?

How do you download and run Adobe version 11.5 on a Mac OSX 10.5.8 operating system?

Welcome to the Apple Support Communities
Adobe Flash 11.5 isn't supported in Mac OS X Leopard. You have to use Snow Leopard > http://store.apple.com/us/product/MC573/mac-os-x-106-snow-leopard

Integration: how to best access and run SAP through Portal

Similar Messages

Maybe you are looking for