Integration Kit - baan 4

Hi,
is there a baan integration Kit ?
Can't find it at service.sap.com
Regards, Alican

Hello,
It depends what XI product version you looking for.
There is indeed a BAAN kit for XI r2 on service.sap.com. This can be found under the downloads/"Business Objects Downloads" section.
There is NO BAAN kit for XI 3.1 and also not for any future products.
In short, XI r2 one was the last BAAN kit.
Regards,
Duncan

Similar Messages

Does the BO Sharepoint 2007 Integration kit work with Sharepoint Serv 3.0?

Hello,
I have seen several posts about this topic but I still have not come to a correct conclusion. I have Windows Sharepoint Services 3.0 and BO Crystal Reports Server XI R2 SP3. The getting started documentation for SP3 specifically says the portal integration kit can be used with "MS Windows Sharepoint Services or Sharepoint Server 2007". However when I try to install the the integration kit I receive an error "Microsoft Sharepoint Server 2007 is required to install the Microsoft Sharepoint Integration Kit".
Is this true? Do I have something setup wrong or is the documentation incorrect and only Sharepoint server 2007 is supported?
It shows WSS as compatible in this document http://www.businessobjects.com/pdf/solutions/microsoft/bo_microsoft_interoperability_final.pdf
Any clarification would be helpful as I have wasted 1+ days trying to figure this out. I just need to know if Sharepoint services and the Sharepoint integration kit will work together with Crystal Server XI R2 SP3.
Thanks,
Ryan

Hello Ryan,
I recommend to post this query to the [Integration Kits - Other|BusinessObjects Integration Kits; forum.
This forum is dedicated to topics related to the other BusinessObjects Integration Kit.
This forum is dedicated to topics related to other BusinessObjects Integration Kits, including Siebel, Baan, PeopleSoft, and JD Edwards.
It is monitored by qualified technicians and you will get a faster response there.
Also, all SAP Kit queries remain in one place and thus can be easily searched in one place.
Thanks a lot,
Falk

Error after uninstalling the SAP Integration Kit XI 3.0 on Unix

Hi all,
I have uninstalled the SAP Integration Kit XI 3.0 on a single solaris server installation. Uninstall was done exactly as instructed in the manual and everything looked ok.
Now when I try to go to the login page of CMC or InfoView I get an error:
type Status report
message /PartnerPlatformService/service/app/logon.do
description The requested resource (/PartnerPlatformService/service/app/logon.do) is not available.
Is the login page trying to look for the SAP authentication page that was removed ?
Is there some configuration still remaining somewhere that needs to be removed so I get the old login page back ?
Thanks for ideas, Timo

Thanks for pointing to the right direction. I changed the tomcat webapps web.xml file parameter and it was enought to start working again.
   <context-param>
        <param-name>config.logon.service.context</param-name>
        <param-value>/PlatformServices</param-value>
    </context-param>

Error while Importing Integration kit Transport Requets into SAP ECC 5.0

HI ,
1. AT BO side -> I can see the many roles, but under 'role import tab' in CMC when i add any 'role' and click on update button,
     system showing an error as below .
   "Failed while trying to get user list using class CSecRfcRemoteUsersActGrp in method CSecSAPR3Binding::GetUsersInternal(). Error code: 3. Description: Syntax error in program /CRYSTAL/SAPLSECURITY .. "
2. After successfull installation of integration kit on windows 2008 server, i have imported the transport request into SAP ECC
   5.0 When i imported open sql connectivity transport request, i got error mesage . The error message number is 8 and it came
for Generation of programs and screens. i have installed sap gui 710 ( verion : 7100.1.0.1027).
I also transported remaining transport request (infoset, row level, cluster definition, security functions) but all these request
contain similar error. Now when i try to login into sap its going dump.Is there any possibility of reverting back the transport
requests.
Pls help me to fix these issues.
Edited by: sheshikanth reddy on Apr 14, 2010 2:15 AM

Hi ingo,
Now i can able to transport successfully after following the order.
Thank you very much
Edited by: sheshikanth reddy on Apr 14, 2010 11:46 PM
Earlier i have imported non unicode request numbers into sap unicode system.
tats why i got error.
Now i have imported unicode request number to unicode sap system with sequence.
Edited by: sheshikanth reddy on Apr 15, 2010 12:19 AM

Error while updating SAP Integration Kit XI 3.1 to SP3

Dear All,
I have updated BusinessObjects Enterprise XI 3.1 and Integration Kits for SAP XI 3.1 to SP3.
The update of BusinessObjects Enterprise XI 3.1 was fine. While updating IK for SAP, the installation shown the following error
sapweb_rri.dll failed to register.
sapweb_parameter.dll failed to register
Then I completed the installation by 'Ignore' ing the above installer informations.
Now I am getting the following error
"Account information not recognized: Plugin Manager error: Unable to locate the requested plugin secSAPR3 on the server. (FWB 00006)"
Before the update, the setup was working fine.
Does this ignored error caused the problem?
Please help me to resolve the issue.
Thanks and Regards,
Yuvaraj

Thank you.
I have the following questions, for this full installation of IK SP3,
I have imported transports from IK XI 3.1 for R/3 and BO connection in R/3.
Does the transport that comes with IK SP3 is modified?
And also some reports are developed based on the datas from R/3.
Does this complete uninstallation of IK affects the existing contents?
Regards,
Yuvaraj.

SAP Integration kit for BO XIR2 with Crystal XI for BI 7.0 Front end

Hello Team,
We are in a little fix.
We have BOE XIR2, Crystal XI and working with old version of BI front-end 3.5.
We are upgrading to BI 7.0 frontend, but I am not able to trace out the SAP Integration kit for combination of BOE XIR2, Crystal XI and BI7.0.
Is such a thing available, If yes can someone send a link to that.
Regards
Lalan Kanade

Hi,
Thanks for the quick reply
I could trace this document. "BusinessObjects Enterprise XI Release 2 SP3 for Windows"
I checked in "Supported Data Sources for Crystal Rep" section, extract below
SAP BW Server 3.0b SAP GUI 620 or 640
SAP BW Server 3.1c SAP GUI 620 or 640
SAP BW Server 3.5 SAP GUI 640.
But we are using BW Server 7.0 with GUI 7.1 and that working fine even with BOXIR2 and Crystal XI with Old Front End for BI 3.X.
But when we are testing with BOXIR2 and Crystal XI with BI New Front End 7.0 its missing components from the query output.
So the SAP Integration kIt seems old & we need a new Kit which would work with BI New Front End 7.0.
Any suggestions on that
Regards
Lalan

What went wrong in this Integration kit Installation - Any Clue

Hi Ingo and other experts,
I'm trying to install SAP Integration kit and as usual like most of others I'm also getting the common error while importing the roles.
"com/sap/mw/jco/JCO$Function"
1. BO Enterprise is installed on Windows server 2003 64 bit Enterprise Edition Operating System.
2. The BI system which I'm using on a different Windows server 2003 32 bit operating system. ( I'M INSTALLING ALL THE FILES ON THE 64 BIT SERVER ON WHICH BO ENTERPRISE IS INSTALLED. BUT NOT ON 32 BIT SYSTEM WHICH HAS SAP BW/BI).
Note: I only have the ABAP stack on my server. There is no Java stack installed on the 32 BIT SAP BW/BI SERVER.
3. I copied the sapjco3.jar file to C;\Program Files\ Business Objects\Tomcat55\Common\lib.
4. I copied the sapjco3.dll to C:\WINDOWS\system32
5. I got the latest SAP GUI and that is the reason I did not replace the librfc32.dll file as it is said in Ingo's blog.
6. I copied the sapjcorfc.dll to C:\WINDOWS\system32
7. I copied sapjco.jar to C:\Program Files\Business Objects\Tomcat55\common\lib folder.
8. Also I did the transports as mentioned in Ingo's blog.
I restarted the server 2 times and I checked that every server is up and running.
But no luck. Can anyone suggest me a note or a thread to solve this wierd issue.
Sirisha.

--Are you using Tomcat as web server?
Yes. I'm using Tomcat as the web server.
--In this case please use the Java Connector 2.1.8 and use the 32bit version.even if your BOBJ server runs on a 64bit windows system.
--I'm using the Java Connector 2.1.8. But for 64 Bit. I'm unable to find the 32 bit jco 2.1.8.
I'm did download the 32 bit jco file. Pasted the new 32 bit file in SYSTEM32 FOLDER AND SysWOW64 folder.
--Copy librfc32.dll and sapjco.dll in C:\Windows\SysWOW64 directory.
I copied these 2 files to the location specified. I copied the sapjcorfc.dll file to SysWOW64 folder.
--After you do this just uninstall and re-install the integration Kit for SAP solutions.
I'm going to do that now.
Thanks a lot for your help Stratos.

BOE XI 3.1 + SAP Integration Kit on AIX 5.3 with WebSphere 6.1 (SOLVED)

Hi everybody!
On a recent installation I encountered a problem with SAP Integration Kit using BW Query with prompts; I want to share with you what I did to solve this problem:
First of all, the environment:
IBM Server with AIX 5.3
BO Repository on DB2 9.5
Application Server IBM WebSphere 6.1
BOE XI R3.1
Crystal Reports 2008 SP1
After installing and configuring everything on the system, I encountered some problem launching in InfoView reports created with Crystal Reports 2008 based on BW query with SAP Prompts.
The error that I recieved everytime was:
com.sap.mw.JCO.$Function
What I did to solve this was:
1) Configure the absolute complete classpath inside the Application Server (path/sapjco.jar)
2) Put the sapjco.jar version 2.18 at 32bit (unix version) that you can download at https://websmp108.sap-ag.de/~form/sapnet?_SHORTKEY=01100035870000463654&
Hope this helping you
Bye
Andrea

Dear Gurus,
The issue I am facing is described exactly in the document "Upgrading to CR 2008 V1 / SP1" by Blair Wheadon.
The problem occurs when installing CR2008v1 and BOE 3.1 on the same machine.
The solution is to download and install SP1.
Unfortunately for me, I have downloaded SP1 but the installation is not going well.
Message prompts that installation files are corrupt and that I should download again.
I have downloaded twice. And tried several times.
So I guess it might be due to the platform.
But why wasn;'t the message displayed after BOE3.1 installation was completed?
Do you guys have an idea?
Alice

Error while installing SAP integration kit 3.1

Hi,
I installed SAP integration kit 3.1 on one server and it is working fine but when i am installing same installable on another server it is giving error as "Installation ended prematuarly because of an error". I dont know how to debug the error. Please help me.
Thamnks in advance

Hi Sonali,
had a similar problem on a Windows/Tomcat system. The installation was crashing before trying to deploy the .jar files. If you are facing the problem in a similar environment please make sure that you have copied the librfc32.dll and the sapjco.jar files in the correct directories. Especially for sapjco.jar doublecheck the path you have copied the file into.
Regards,
Stratos

Error in installing business in integration kit

I am getting following error while executing the setup file for BO integration kit 3.1
error you must have business object XI integration for sap solution install
I have installed,
step 1 BOBJ Edge BI 3.1
step 2 :BOBJ Edge BI 3.1 SP3 for Server Components
step 3 :BOBJ Edge BI 3.1 FP3.2 for Server Components
step 4 : sap gui installation
step 5: java connector installation
step6 : bo integration kit for sap (when i run the setup it gives the following error.
Is it because Of edge series ? Do i need ti install enterprise edition ?
Please help to resolve this issue.
Thanx

The installation should look like this:
0. Install SAP GUI
1. Install BO Edge 3.1
2. Install JCO.
3. Install int.Kit for SAP solutions 3.1 (found in the BO Edge installation package under the collaterals folder)
4. Install SP 3 for BO Edge Server components
5. INstall SP3 for BO Edge integration Kit
6. Install FP 3.2 for BO Edge Server components
7. Install FP 3.2 for BO Edge Integration Kit.
Make sure to choose the Advanced installation type when you install BO Edge and install Tomcat. Otherwise the integration Kit cannot be installed (requires a Java server).
Regards,
Stratos
Edited by: Efstratios Karaivazoglou on Oct 24, 2010 1:03 PM

Error when installing the Integration Kit for SAP

Hello,
When installing the integration Kit I get the following error:
The installation of BO XI Integration for SAP Solutions cannot continue because WACS has been installed with BO Enterprise.
i have seen in BO-SAp Integration Kit Installation Error that I have to had selected the point Install Tomcat application server option, but I was not asked to.
I'm following the blog BusinessObjects and SAP - Part 1 of 4, and my installation screens are similar but not equal. for example, I fon't have the installation type new, but the quickk type. And I cannot select the database, too.
Of course the screen asking about the Web Application server with the option of installing the tomcat application server doesn't appear.
What have I done wrong?
What is the solution? Reinstalling everything but doing what?
Thanks and regards,
Ana.

Hi Ingo,
Yes, it is BO Edge.
I have deinstalled the BO Edge sw and now I have installed it again. This time I have selected the export installation type and I have select the TOMCAT. The installation has finished successfully, but when installing the SAP integration Kit, I have the same problem. The message about the WACS already installed appears again.
What else can I do?
Thanks and regards,
Ana.

Crystal Developer XI without Sap integration kits cant see released Queries

Hi All!
When I'm used MS Excel, I can see released SAP BW Queries via SAP OLE DB access. But when I'm used Crystal Developer XI (without Sap integration kits), I cant see released SAP BW Queries via SAP OLE DB access.
What's a problem here?
WBR Artem

Hi,
you missing the SAP integration Kit. To conenct to SAP BW you need the SAP Integration Kit installed.
ingo

Default language settings in SAP Integration Kit?

Hi everybody,
I've the following problem:
If I create a report with the SAP Integration Kit (create new report from a query) I get a prompt where I can type in (System Number, User, Password and LANGUAGE). If I now choose as language u201CEnglishu201D and create a report, save it and open it in crystal again, everything is still fine. But if I go to refresh the report, I get a prompt where I can choose the SAP BW and type in the System Number, User and Password but not the LANGUAGE. After the refresh the names of the fields are still in English but the data is now in German (or just the technical names, depends on the language settings in the query).
For me it looks like that the language settings of the refresh are by default in crystal is set to German, but the software is English. I didnu2019t find any way to change the default language to English or save it in the report.
I already tried to change the language/regional/keyboard settings of my machine and also tried to change the language in the crystal formula field u201Clanguagecode%u201D.
But even if I could have a unique change in some system settings, it really will not help me, because I have some queries in German and some in English, depending on the actual BW system.
If the SAP Integration Kit gives me the possibility to choose the language during the creation of the report it should then remember the choice!?
Thank you for your help

Post your question to the Business Object Integration Kits forum

How to import the transports from the SAP Integration Kit into SAP system

Hi expert,
I read the forum "Re: Integration with SAP R/3 to realise i have not done the import of transport but i don't quite understand the statement give by "Sebastian Li".
"Unpack the SAP Integration Kit zip-file. It contains a transport-folder. Here you'll find a short manual which files you should import.
Copy the needed files on your sap-system in the correct folders:
- usr\sap\trans\cofiles
- usr\sap\trans\data
Use the transaction STMS.
Also take care of the sequence of importing. See the manual for details."
Can some one explain it in more details to me. I have unzip the SAP Integration Kit n in the transport folder got 2 more folder "ansi" and "unicode_compatible". How do i know which 1 to use? Where i should copy this files to?
Please advice.
thank you

Hi Rajesh,
check this : logon failed. you do not have the necessary rights to design reports
@Sri

Anychart 5 integration kit for APEX

Hello,
Just wanted to write a quick post to tell everybody we released the Anychart 5 integration kit for APEX a couple of days ago.
I know a lot of you already tried to integrate a later version of Anychart, the kit (which is free - but you need an Anychart 5 license) should make this more easy for you.
You can find more information about the kit at http://dgielis.blogspot.com/2008/11/anychart-5-integration-kit-for-apex.html or see the examples at http://anychart.apex-evangelists.com
Hope you all like it.
Regards,
Dimitri
http://dgielis.blogspot.com/
http://www.apex-evangelists.com/
http://www.apexblogs.info/

Hello Chris,
I'll try to do that in the next days or early next week. I'm creating another example of such a map.
In the meantime you can have a look here: http://anychart.apex-evangelists.com/pls/apex/f?p=454:13:0
Look at the region source. You basically create a 2D Column chart and change the select like I did:
select null link, REGION label, SALES "{n:Sales;tr:t1}"
from STATE_SALESFor the region source you can change it to the new Anychart 5:
<anychart>
    <charts>
        <chart plot_type="Map" use_anychart3_data_model="true" use_sets_colors="false">
<thresholds>
                        <threshold name="T1" palette="P1" range_count="3" type="EqualSteps"
                                        auto_value="{%Value}"/>
                </thresholds>
                <palettes>
                  <palette name="P1">
                    <item color="#E06232" />
                    <item color="#E0D231" />
                    <item color="#6CAC32" />
                  </palette>
                </palettes>
            <data_plot_settings>
                <map_series source="states.amap">
                    <defined_map_region>
                        <label_settings enabled="true">
                            <format><![CDATA[{%Name}]]></format>
                            <background enabled="false"/>
                            <font size="9" color="#292929"/>
                        </label_settings>
                        <tooltip_settings enabled="true">
                            <format><![CDATA[{%REGION_NAME} ({%Name}) - ${%Value}
{numDecimals:0}]]></format>
                        </tooltip_settings>
                    </defined_map_region>
                    <grid>
                        <parallels enabled="false"/>
                        <meridians enabled="false"/>
                        <background enabled="false"/>
                    </grid>
                </map_series>
            </data_plot_settings>
            <chart_settings>
                <title>
                    <text>USA Sales Map</text>
                </title>
            </chart_settings>
    #DATA#
        </chart>
    </charts>
</anychart>Regards,
Dimitri
http://dgielis.blogspot.com/
http://www.apex-evangelists.com/
http://www.apexblogs.info/
REWARDS: Please remember to mark helpful or correct posts on the forum, not just for my answers but for everyone!

Integration Kit - baan 4

Similar Messages

Maybe you are looking for