Integration kit bobj server

Hi Experts,
Can we point one BOBJ server to sap dev,qa and prd while installing sap integration kit, i have one bobj server and i have to install integration kit on it and i am wondering can i use same server to connect sap bi dev,qa and prd systems instead of installing separately on three bobj servers.
Thanks

Thanks Ingo,
Can you please give me some input or some document link how to leverage this installation on one server .
Thanks,
Rag

Similar Messages

What do I need to install Integration Kit for SharePoint Server 2007

What do I need to install the Integration Kit for Microsoft Office SharePoint Server 2007? It gives me an SP3 needed error but does not tell me what SP3. Has any one sucessfully installed this kit? Please help.

Hi,
The sharepoint PIK is available for BO enterprise only. SP3 is refering to BO enterprise XIR2 SP3. This Service Pack is not available for CR 2008. In order to integrate CR 2008 in BO enterprise XIR3 you need to install SP0 on top of CR 2008. But as I said above without BO enterprise you won't be able to use the PIK.
I copied the following system requirements from our Install Guide for BOE XiR3 PIK:
System requirements
For a list of system requirements, consult the Platforms.txt file included
with your product distribution. For additional important information that may
pertain to your deployment, it is also strongly recommended that you consult
the Release Notes included with your product distribution.
In general, the following components must be installed and configured
correctly before you install the BusinessObjects Enterprise XI 3.0 Portal
Integration Kit:
u2022 Microsoft Windows SharePoint Services or Office SharePoint Portal
Server 2003.
u2022 BusinessObjects Enterprise XI .NET SDK (on your SharePoint machine
or machines).
u2022 Microsoft Windows Server 2003 (any edition).
u2022 BusinessObjects Enterprise and Crystal Reports (on either the same
machine and/or on a different machine).
Kind regards,
Tim

Cristal report server XI feature 2 integration kit to WOSS 2007

Hi All,
we would like user to be able to run report from our WOSS 2007 envirronement. To do so, we would like to integrate Cristal report server F2 to our WOSS 2007.
I would like to know where can we look to to see update or ServicePack that have been install on Cristal Report ? Also if there is documentation on what need to be install on Sharepoint to to achive this.
I have download the BusinessObjects XI Release 2 SharePoint 2007 Portal Integration Kit but I always get a error message when I try to install it.
error: SP3 Patch is required to install Sharepoint 2007 integration kit
CHeers
Frederic

Apologies if I didn't get it correctly..
XIR2 SharePoint 2007 PIKs support was introduced from BOE XIR2 SP3 onwards, hence the message
Thanks
-Amit-

Can I Install without BO Enterprise a BO Integration Kit for SAP -Server

Helo Experts,
I want to Install a Business Objects Integration Kit 3.0 for SAP on our Server. Is a Business Objects Enterprise needed for this installation ?????
Thanks
C

Hi, Caner.
When you are installing Integration Kit you have 3 options: Desktop, Server, Custom.
Of course your choice depends on your requirements.
1. Desktop. If you plan to work with BW-source locally in Crystal or in WebI Rich Client this option for you. You donnt need to install BOE, it is working with client tools.
2. Server. This variant is suitable for work with BOE. If you plan to share your reports that based on BW-sources via BOE you MUST to install this on your BOE.
3. Custom. For "power"-users. If you choose this point by default it works like Desktop options, but it doesnt ask you to install Crystal reports. Usually I work with this kind installation.
Regards.

BOBJ Integration Kit with Plone?

We have a setup where our Enterprise Portal is Plone. Is there a BOBJ Integration Kit with Plone, or one for opensource in general, or should we use the SAP PIK and link the SAP Portal to Plone for this purpose?

Hi,
i`m not aware of any PIK for Plone. The easiest way would be to place a HTTP Link in your Portal to BI LaunchPad or SAP EP.
You could create an OSS Message with the SAP Support to check if there is a PIK....but i dont think so.
Regards
-Seb.

Does the BO Sharepoint 2007 Integration kit work with Sharepoint Serv 3.0?

Hello,
I have seen several posts about this topic but I still have not come to a correct conclusion. I have Windows Sharepoint Services 3.0 and BO Crystal Reports Server XI R2 SP3. The getting started documentation for SP3 specifically says the portal integration kit can be used with "MS Windows Sharepoint Services or Sharepoint Server 2007". However when I try to install the the integration kit I receive an error "Microsoft Sharepoint Server 2007 is required to install the Microsoft Sharepoint Integration Kit".
Is this true? Do I have something setup wrong or is the documentation incorrect and only Sharepoint server 2007 is supported?
It shows WSS as compatible in this document http://www.businessobjects.com/pdf/solutions/microsoft/bo_microsoft_interoperability_final.pdf
Any clarification would be helpful as I have wasted 1+ days trying to figure this out. I just need to know if Sharepoint services and the Sharepoint integration kit will work together with Crystal Server XI R2 SP3.
Thanks,
Ryan

Hello Ryan,
I recommend to post this query to the [Integration Kits - Other|BusinessObjects Integration Kits; forum.
This forum is dedicated to topics related to the other BusinessObjects Integration Kit.
This forum is dedicated to topics related to other BusinessObjects Integration Kits, including Siebel, Baan, PeopleSoft, and JD Edwards.
It is monitored by qualified technicians and you will get a faster response there.
Also, all SAP Kit queries remain in one place and thus can be easily searched in one place.
Thanks a lot,
Falk

What went wrong in this Integration kit Installation - Any Clue

Hi Ingo and other experts,
I'm trying to install SAP Integration kit and as usual like most of others I'm also getting the common error while importing the roles.
"com/sap/mw/jco/JCO$Function"
1. BO Enterprise is installed on Windows server 2003 64 bit Enterprise Edition Operating System.
2. The BI system which I'm using on a different Windows server 2003 32 bit operating system. ( I'M INSTALLING ALL THE FILES ON THE 64 BIT SERVER ON WHICH BO ENTERPRISE IS INSTALLED. BUT NOT ON 32 BIT SYSTEM WHICH HAS SAP BW/BI).
Note: I only have the ABAP stack on my server. There is no Java stack installed on the 32 BIT SAP BW/BI SERVER.
3. I copied the sapjco3.jar file to C;\Program Files\ Business Objects\Tomcat55\Common\lib.
4. I copied the sapjco3.dll to C:\WINDOWS\system32
5. I got the latest SAP GUI and that is the reason I did not replace the librfc32.dll file as it is said in Ingo's blog.
6. I copied the sapjcorfc.dll to C:\WINDOWS\system32
7. I copied sapjco.jar to C:\Program Files\Business Objects\Tomcat55\common\lib folder.
8. Also I did the transports as mentioned in Ingo's blog.
I restarted the server 2 times and I checked that every server is up and running.
But no luck. Can anyone suggest me a note or a thread to solve this wierd issue.
Sirisha.

--Are you using Tomcat as web server?
Yes. I'm using Tomcat as the web server.
--In this case please use the Java Connector 2.1.8 and use the 32bit version.even if your BOBJ server runs on a 64bit windows system.
--I'm using the Java Connector 2.1.8. But for 64 Bit. I'm unable to find the 32 bit jco 2.1.8.
I'm did download the 32 bit jco file. Pasted the new 32 bit file in SYSTEM32 FOLDER AND SysWOW64 folder.
--Copy librfc32.dll and sapjco.dll in C:\Windows\SysWOW64 directory.
I copied these 2 files to the location specified. I copied the sapjcorfc.dll file to SysWOW64 folder.
--After you do this just uninstall and re-install the integration Kit for SAP solutions.
I'm going to do that now.
Thanks a lot for your help Stratos.

Error in installing business in integration kit

I am getting following error while executing the setup file for BO integration kit 3.1
error you must have business object XI integration for sap solution install
I have installed,
step 1 BOBJ Edge BI 3.1
step 2 :BOBJ Edge BI 3.1 SP3 for Server Components
step 3 :BOBJ Edge BI 3.1 FP3.2 for Server Components
step 4 : sap gui installation
step 5: java connector installation
step6 : bo integration kit for sap (when i run the setup it gives the following error.
Is it because Of edge series ? Do i need ti install enterprise edition ?
Please help to resolve this issue.
Thanx

The installation should look like this:
0. Install SAP GUI
1. Install BO Edge 3.1
2. Install JCO.
3. Install int.Kit for SAP solutions 3.1 (found in the BO Edge installation package under the collaterals folder)
4. Install SP 3 for BO Edge Server components
5. INstall SP3 for BO Edge integration Kit
6. Install FP 3.2 for BO Edge Server components
7. Install FP 3.2 for BO Edge Integration Kit.
Make sure to choose the Advanced installation type when you install BO Edge and install Tomcat. Otherwise the integration Kit cannot be installed (requires a Java server).
Regards,
Stratos
Edited by: Efstratios Karaivazoglou on Oct 24, 2010 1:03 PM

BO XI 3.1 SP3 - SAP Integration Kit: Transports

Hi All,
My question is regarding the transports that need to be imported into SAP system so that it can connect with BOE. We are connecting our BW system with BOE, please let me know whether we need to move all transports in BW system only or we have to move transports in R3 system as well.
Thanks in advance.

Hello Ingo,
Please help us in solving the below issue:
We have installed BO XI 3.1 version with the following configurations.
Windows 2003 Server, SP2 64bit Version
Java: JDK 1.7 and JRE 1.7
BW: BW 3.5 version
BOE in Tomcat 5.5 App server
SAP integration kit 3.1 32 bit (51040568.zip)
The issue is that while integrating BOBJ with BW to import all the roles for SSO, we are unable to find the exact JCO files for doing the same. We tried with JCO 2.1.8, JCO 2.1.10 and JCO 3.0, but all the versions turned futile. After the initial installation with JCO 2.1.8 version (as per to Installation guide) we found neither CMC nor Java Infoview are working.
Please help us in identifying the right JCO for the proper installations and do we need to install SAP integration kit 3.1 SP3 ? This is pretty urgent
Regards,
Rajib

SAP Integration Kit installation - BW Publisher parameters

Hi,
We are working on an BO GRC RM 3.0 scenario (Windows/SQL Server). As per architecture requirements we are currently installing BOBJ Integration Kit for SAP. However the following doubt comes up. As per architecture requirement also, and as it was defined for our scenario there is no need for an BI system (AS JAVA was installed only as EP usage type) if the reporting is going to be used with BOE Crystal. What we need there, is to install and BOBJ SAP Integration kit on BOE XI 3.1 server and to import Crystal transport files in AS ABAP (SAP_ABA, SAP_BASIS, PI_BASIS, SAP_BW).
During the Integration Kit installation process we are being prompted for BW Publisher parameters where an RFc to a BW system is required. As mentioned earlier, we donu2019t have an BW system since BOE Crystal will be used instead of WebDynpro ABAP ListViewer...Are we using the incorrect Integration Kit? Should I install BI_Content Add-on installed on AS ABAP even when reporting is going to be used with Crystal Report?
Hoping being clear enough, please let me know if I can proceed with Integration kit installation in this way or should I have some other precautions for this particular solution implementation.
Thanks and best regards.

Hi,
in case you do not have SAP BW as part of the landscape then there is no need to install the publishing component
Ingo

URL to download BO XI 3.1 SP3 Integration kit for SAP Solutions

HI
I have Installed BO XI 3.1 SP3 Enterprise in the server.I want to Install BO XI 3.1 SP3 Integration kit for SAP solutions.
1)I want to know what is the order of Installations i need to install in case of Crystal Reports and Xcelsius,BI,SAP GUI.
2)Give me the link to Down load above version Integration Kit.
3)What are Installations Compulsory before installing BO XI 3.1 SP3 integration kit SAP solutions and give some more brief Idea

hi,
You can use this link:https://websmp101.sap-ag.de/bosap-support
then:
Software Downloads>BusinessObjects Downloads>Browse the SAP BusinessObjects Portfolio>Installation and Upgrade>SBOP INTGR. FOR SAP-->BOBJ INTGR. FOR SAP XI 3.1
then you can see it.
lory

Integration Kit and SSO

Hi ;
1) Is there a valid comprehensive Guide to install Integration Kit , SETUP SSO between SAP BW and Business Object
2) if we have an AD authentication turned on for windows - bobj users , can we still use that authentication for users when accessing CRYSTAL REPORTS based on ( sap bw data ) ,, if so how do we do that
Thanks

Hi,
you SAP system can only handle one set of SNC libraries so if the goal is to have Thin and Thick Client support then you need to look for a SNC software that does support both scenarios.
The mentioned SAP Crytpo Lib only does support web based scenarios as it is focusing on server trust.
You can look at software available by other vendors for example TFS, SECUDE, ...
Ingo

MISSING Template Selection - BusinessObjects Enterprise Integration Kit

Hello,
I have the "com.businessobjects.pct.masteriview.par" imported. According to the description should now when you create a new iView in the selection of templates "BusinessObjects Integration Kit iView template" is available. This does not work! I did not see this option available.
Can someone help me? I went in front after this documentation (C5)
http://wiki.sdn.sap.com/wiki/display/BOBJ/CreateBOEXI3.1IntegrationKitIViewTemplateintoSAPEP+Portal
Regards
J.V.
Edited by: Jana VOGL on Nov 9, 2010 1:23 PM

Hi,
the portal runs on a server. What is wrong? I have done everything exactly as documented.
Regards
J.V.
Edited by: Jana VOGL on Nov 11, 2010 8:13 AM

Integration Kit for SAP - Edge or XI?

Hi guys, I'm a little confused, I know that BOBJ Edge Server components is a XI, capped and intended for smaller installations. The question is, I don't see in the installation components any "Integration Kit for SAP Solutions" specific for EDGE, however I do see "SBOP EDGE BI, VERSION WITH DATA INTEGRATION (FOR SAP ERP)" that includes the Int Kit.
The question is, what happened if I installed Edge before without the Int Kit for SAP, do I have to uninstall and re-istall? or I can use the Int Kit for SAP for XI?
Thanks for your help.

mmmm, actually I had installed by mistake the Integration Kit for SAP for XI, it did let me install, after the fact I realized that I should had used the one that comes with Edge with Data Integration for ERP.
I did uninstall and re-installed the correct one, however, I also noticed that the SP2 for the Integration Kit says on the title "BOBJ XI 3.1 Integration Kit for SAP Solutions" and not BOBJ Edge. So makes me wonder if there is a real difference.

Integration kit for SAP installation

Dear All,
We have Ecc6 EHP5 server ( only ABAP instance not JAVA) installed also BW by default in same server we just create new client ( 300 as BW client ) from RSA1
OS is Suse linux 11.
We installed Business objects EDGE 3.1 in different server which is also Suse Linux 11 server
and then installed client tools like Xcelsius , Crystal Reports etc in user Laptop which is base on windows xp.
now we installed Integration kit for SAP in the server where we installed Business objects EDGE 3.1 ( in Suse linrux machine )
during installed of integration kit for SAP no input related to BW server because BOBJ connect to BW ( that is why we installed integration kit for SAP) and why we need java connector we don't have JAVA instance, and what to do next
Regards
Shahid

Thanks Ingo Hilgefortfor your reply.
My queries is
1.    We have only abap instance , Java instance is mandatory for BOBJ ?
2.    We installed BOBJ edge 3.1 in Linux server and in same server we installed Integration kit for SAP ( during the installation of
       integration kit no input related to connected server ( BW server ) how to integrate BOBJ edge 3.1 with BW server) what
       Next ?
3.   after installation of integration kit and import transport request in BW server ( which in actually act as client in ECC 6 server)
      when we goto http://server:8080/CmcApp then to Authentication it shows enterprise and Ldap no SAP authentication I also
      download java connector and place it ..../Tomcat/shared/lib/sapjco.jar ?
Regards
Shahid

Integration kit bobj server

Similar Messages

Maybe you are looking for