Integration KIT R2 and BW7.0
Hi all,
i would like to know if is possible to integrate a BO XI R2 on a SAP system with BW7.0.
I've downloaded the integration kit R2 for sap, and the file platforms_en.txt included in it speaks about the following:
==========
4: SAP GUI
==========
SAP 620 GUI, patch level 42
SAP 640 GUI, patch level 8
==============
5: SAP Servers
==============
SAP BW 3.0b, BASIS level 55, ABA level 55, BW level 29
SAP BW 3.1c, BASIS level 55, ABA level 55, BW level 23
SAP BW 3.5, BASIS level 16, ABA level 16, BW level 15
SAP R/3 4.6c BASIS level 46c, ABA level 46c
SAP R/3 4.7 BASIS level 41, ABA level 41
mySAP ERP 2004 BASIS level 9, ABA level 9
SAP Enterprise Portal 6 SP3
Is there a way to integrate BOXI R2 with BW 7.0?
Thanks to anyone will answer.
Kind Regards
Massimo Solleretto
HI Massimo,
on the machine where the BO Server runs on, you just have just to download and install the SAP Java Connector 2.1.6 (You do not need to install SAP GUI on your server). For your development client installations (i.e Universe Designer, Crystal Reports Designer) you have to install SAP GUI 6.40.
Just look in the actual document about the supported platforms for the int.KIT for SAP XI R2.
SAP GUI 7.10 is officially supported in XI 3.0 and 3.1
Regards,
Stratos
Similar Messages
-
Data Integration Kit and SAP BI
Hi Guys,
Have a quick question.
My understanding was we use Data Integration kit in order to integrate Crystal Report and SAP BI. To create an Universe , we dont need Data Integration Kit.
Can anyone please confirm?
RegardsMoved to a different forum.
-
Report on olap universe (integration kit) fails by WEBI and it runs by Rich
I've implemented the integration Kit and an OLAP universe query based and it runs.
I've a problem on a report that runs via Rich Client and fails via web client.
We are on BI 7.0 sp 19. Is it necessary to upgrade to BI 7.01 SP03 or SP04 ? We've seen your interesting document about the improvement of perfomance of BI 7.01 SP04 but we'd like to upgrade our BI system 7.0 in 2 months and not now.
Thanks in advance.
Best Regards.Hi Sebastian,
The BO XI 3.1 Fix pack Level is 1.7. We have activated traces but we don't know if the traces are java.
We have the problem with reports with a large quantity of data, in report with a low quantity of data webi runs.
OSS ask us to evaluate the upgrade of our SAP BI to the EHP1 03 but it requires 2 weeks and we'd like to evaluate all alternatives before to do it.
Thanks in advance.
Best Regards.
M. -
Hi ;
1) Is there a valid comprehensive Guide to install Integration Kit , SETUP SSO between SAP BW and Business Object
2) if we have an AD authentication turned on for windows - bobj users , can we still use that authentication for users when accessing CRYSTAL REPORTS based on ( sap bw data ) ,, if so how do we do that
ThanksHi,
you SAP system can only handle one set of SNC libraries so if the goal is to have Thin and Thick Client support then you need to look for a SNC software that does support both scenarios.
The mentioned SAP Crytpo Lib only does support web based scenarios as it is focusing on server trust.
You can look at software available by other vendors for example TFS, SECUDE, ...
Ingo -
Visual Age 3.5, WLS 5.1, Integration Kit 5.1 beta and JSP?
Hello,
i have a problem with the missing JSP-support in Visual Age. It would be a
workaround to develop JSP outside Visual Age and just put them into the
myserver/public_html directory. But if i start WLS from within Visual Age,
the JSP won't compile, i get the error:
D:\Java\bea51\myserver\classfiles\jsp_servlet\_test.java:48: Wrong number of
arguments in method.
if (sci.isResourceStale("/test.jsp", 978702001388L, "5.1.0 Service
Pack 6 09/20/2000 21:03:19 #84511")) return true;
Operating System is WinNT 4.0, Service Pack 6, i use the professional
edition of Visual Age.
Is there a wrong setting in the IDE or is it impossible to develop JSPs with
the Integration Kit?
Regards,
Reinhard Maier
D:\Java\bea51\myserver\classfiles\jsp_servlet\_test.java:48: Wrong number of
arguments in method.
if (sci.isResourceStale("/test.jsp", 978702001388L, "5.1.0 Service
Pack 6 09/20/2000 21:03:19 #84511")) return true;
^
1 error
java.io.IOException: Compiler failed
executable.exec([Ljava.lang.String;[d:/java/jdk1.2/bin/javac.exe, -classpath
, "D:\Programme\IBM\VisualAge for
Java\ide\program\lib\rt.jar;.;d:\programme\ibm\visualage for
java\ide\project_resources\WebLogic Examples;d:\programme\ibm\visualage for
java\ide\project_resources\Weblogic Java 2
Classes;d:\programme\ibm\visualage for java\ide\project_resources\WebLogic
Java Enterprises Libraries;d:\programme\ibm\visualage for
java\ide\project_resources\WebLogic OCI;d:\programme\ibm\visualage for
java\ide\project_resources\WebLogic Server;d:\programme\ibm\visualage for
java\ide\project_resources\WebLogic Server
Classes;d:\programme\ibm\visualage for java\ide\project_resources\WebLogic
Support
Libraries;d:\java\bea51\classes\boot\;d:\java\bea51\classes\;d:\java\bea51\l
icense\;d:\java\bea51\myserver\serverclasses\;d:\java\bea51\lib\weblogicaux.
jar;d:\java\bea51\myserver\ejb_basic_containerManaged.jar;d:\java\bea51\myse
rver\ejb_extensions_readMostly.jar;d:\java\bea51\classes;D:\Java\bea51\myser
ver\tmp_deployments\ejbjar30505.jar;d:\java\bea51\myserver\servletclasses;D:
\Java\bea51\myserver\classfiles", -d, D:\Java\bea51\myserver\classfiles,
D:\Java\bea51\myserver\classfiles\jsp_servlet\_test.java])
java.lang.Throwable(java.lang.String)
java.lang.Exception(java.lang.String)
java.io.IOException(java.lang.String)
void
weblogic.utils.compiler.CompilerInvoker.compileMaybeExit(java.lang.String
void weblogic.utils.compiler.CompilerInvoker.compile()
void weblogic.servlet.jsp.JspStub.compilePage(java.lang.String,
javax.servlet.http.HttpServletRequest,
javax.servlet.http.HttpServletResponse, boolean)
void
weblogic.servlet.jsp.JspStub.prepareServlet(weblogic.servlet.internal.Servle
tRequestImpl, weblogic.servlet.internal.ServletResponseImpl)
javax.servlet.Servlet
weblogic.servlet.internal.ServletStubImpl.getServlet(weblogic.servlet.intern
al.ServletRequestImpl, weblogic.servlet.internal.ServletResponseImpl)
void
weblogic.servlet.internal.ServletStubImpl.invokeServlet(weblogic.servlet.int
ernal.ServletRequestImpl, weblogic.servlet.internal.ServletResponseImpl)
void
weblogic.servlet.internal.ServletStubImpl.invokeServlet(weblogic.servlet.int
ernal.ServletRequestImpl, weblogic.servlet.internal.ServletResponseImpl)
void
weblogic.servlet.internal.ServletContextImpl.invokeServlet(weblogic.servlet.
internal.ServletRequestImpl, weblogic.servlet.internal.ServletResponseImpl,
weblogic.servlet.internal.ServletStubImpl)
void
weblogic.servlet.internal.ServletContextImpl.invokeServlet(weblogic.servlet.
internal.ServletRequestImpl, weblogic.servlet.internal.ServletResponseImpl)
int
weblogic.servlet.internal.ServletContextManager.invokeServlet(weblogic.socke
t.MuxableSocketHTTP)
int weblogic.socket.MuxableSocketHTTP.invokeServlet()
void
weblogic.socket.MuxableSocketHTTP.execute(weblogic.kernel.ExecuteThread)
void weblogic.kernel.ExecuteThread.run()
Mo Jan 08 12:00:03 GMT+01:00 2001:<E> <ServletContext-General> Servlet
failed with Exception
java.io.IOException: Compiler failed
executable.exec([Ljava.lang.String;[d:/java/jdk1.2/bin/javac.exe, -classpath
, "D:\Programme\IBM\VisualAge for
Java\ide\program\lib\rt.jar;.;d:\programme\ibm\visualage for
java\ide\project_resources\WebLogic Examples;d:\programme\ibm\visualage for
java\ide\project_resources\Weblogic Java 2
Classes;d:\programme\ibm\visualage for java\ide\project_resources\WebLogic
Java Enterprises Libraries;d:\programme\ibm\visualage for
java\ide\project_resources\WebLogic OCI;d:\programme\ibm\visualage for
java\ide\project_resources\WebLogic Server;d:\programme\ibm\visualage for
java\ide\project_resources\WebLogic Server
Classes;d:\programme\ibm\visualage for java\ide\project_resources\WebLogic
Support
Libraries;d:\java\bea51\classes\boot\;d:\java\bea51\classes\;d:\java\bea51\l
icense\;d:\java\bea51\myserver\serverclasses\;d:\java\bea51\lib\weblogicaux.
jar;d:\java\bea51\myserver\ejb_basic_containerManaged.jar;d:\java\bea51\myse
rver\ejb_extensions_readMostly.jar;d:\java\bea51\classes;D:\Java\bea51\myser
ver\tmp_deployments\ejbjar30505.jar;d:\java\bea51\myserver\servletclasses;D:
\Java\bea51\myserver\classfiles", -d, D:\Java\bea51\myserver\classfiles,
D:\Java\bea51\myserver\classfiles\jsp_servlet\_test.java])
java.lang.Throwable(java.lang.String)
java.lang.Exception(java.lang.String)
java.io.IOException(java.lang.String)
void
weblogic.utils.compiler.CompilerInvoker.compileMaybeExit(java.lang.String
void weblogic.utils.compiler.CompilerInvoker.compile()
void weblogic.servlet.jsp.JspStub.compilePage(java.lang.String,
javax.servlet.http.HttpServletRequest,
javax.servlet.http.HttpServletResponse, boolean)
void
weblogic.servlet.jsp.JspStub.prepareServlet(weblogic.servlet.internal.Servle
tRequestImpl, weblogic.servlet.internal.ServletResponseImpl)
javax.servlet.Servlet
weblogic.servlet.internal.ServletStubImpl.getServlet(weblogic.servlet.intern
al.ServletRequestImpl, weblogic.servlet.internal.ServletResponseImpl)
void
weblogic.servlet.internal.ServletStubImpl.invokeServlet(weblogic.servlet.int
ernal.ServletRequestImpl, weblogic.servlet.internal.ServletResponseImpl)
void
weblogic.servlet.internal.ServletStubImpl.invokeServlet(weblogic.servlet.int
ernal.ServletRequestImpl, weblogic.servlet.internal.ServletResponseImpl)
void
weblogic.servlet.internal.ServletContextImpl.invokeServlet(weblogic.servlet.
internal.ServletRequestImpl, weblogic.servlet.internal.ServletResponseImpl,
weblogic.servlet.internal.ServletStubImpl)
void
weblogic.servlet.internal.ServletContextImpl.invokeServlet(weblogic.servlet.
internal.ServletRequestImpl, weblogic.servlet.internal.ServletResponseImpl)
int
weblogic.servlet.internal.ServletContextManager.invokeServlet(weblogic.socke
t.MuxableSocketHTTP)
int weblogic.socket.MuxableSocketHTTP.invokeServlet()
void
weblogic.socket.MuxableSocketHTTP.execute(weblogic.kernel.ExecuteThread)
void weblogic.kernel.ExecuteThread.run()Hi ,
There is a solution posted in "weblogic.beta.tools.visualage" newsgroup which will enable u to
develope and debug JSP's from IVJ .
TITLE "JSP debugging in IVJ "
cheers
Amjad
Dana Jeffries wrote:
Visual Age does not support the latest versrions of the JSP/servlet spec. I believe they're still
.92 and 1.0.
Reinhard Maier wrote:
Hello,
i have a problem with the missing JSP-support in Visual Age. It would be a
workaround to develop JSP outside Visual Age and just put them into the
myserver/public_html directory. But if i start WLS from within Visual Age,
the JSP won't compile, i get the error:
D:\Java\bea51\myserver\classfiles\jsp_servlet\_test.java:48: Wrong number of
arguments in method.
if (sci.isResourceStale("/test.jsp", 978702001388L, "5.1.0 Service
Pack 6 09/20/2000 21:03:19 #84511")) return true;
Operating System is WinNT 4.0, Service Pack 6, i use the professional
edition of Visual Age.
Is there a wrong setting in the IDE or is it impossible to develop JSPs with
the Integration Kit?
Regards,
Reinhard Maier
D:\Java\bea51\myserver\classfiles\jsp_servlet\_test.java:48: Wrong number of
arguments in method.
if (sci.isResourceStale("/test.jsp", 978702001388L, "5.1.0 Service
Pack 6 09/20/2000 21:03:19 #84511")) return true;
^
1 error
java.io.IOException: Compiler failed
executable.exec([Ljava.lang.String;[d:/java/jdk1.2/bin/javac.exe, -classpath
, "D:\Programme\IBM\VisualAge for
Java\ide\program\lib\rt.jar;.;d:\programme\ibm\visualage for
java\ide\project_resources\WebLogic Examples;d:\programme\ibm\visualage for
java\ide\project_resources\Weblogic Java 2
Classes;d:\programme\ibm\visualage for java\ide\project_resources\WebLogic
Java Enterprises Libraries;d:\programme\ibm\visualage for
java\ide\project_resources\WebLogic OCI;d:\programme\ibm\visualage for
java\ide\project_resources\WebLogic Server;d:\programme\ibm\visualage for
java\ide\project_resources\WebLogic Server
Classes;d:\programme\ibm\visualage for java\ide\project_resources\WebLogic
Support
Libraries;d:\java\bea51\classes\boot\;d:\java\bea51\classes\;d:\java\bea51\l
icense\;d:\java\bea51\myserver\serverclasses\;d:\java\bea51\lib\weblogicaux.
jar;d:\java\bea51\myserver\ejb_basic_containerManaged.jar;d:\java\bea51\myse
rver\ejb_extensions_readMostly.jar;d:\java\bea51\classes;D:\Java\bea51\myser
ver\tmp_deployments\ejbjar30505.jar;d:\java\bea51\myserver\servletclasses;D:
\Java\bea51\myserver\classfiles", -d, D:\Java\bea51\myserver\classfiles,
D:\Java\bea51\myserver\classfiles\jsp_servlet\_test.java])
java.lang.Throwable(java.lang.String)
java.lang.Exception(java.lang.String)
java.io.IOException(java.lang.String)
void
weblogic.utils.compiler.CompilerInvoker.compileMaybeExit(java.lang.String
void weblogic.utils.compiler.CompilerInvoker.compile()
void weblogic.servlet.jsp.JspStub.compilePage(java.lang.String,
javax.servlet.http.HttpServletRequest,
javax.servlet.http.HttpServletResponse, boolean)
void
weblogic.servlet.jsp.JspStub.prepareServlet(weblogic.servlet.internal.Servle
tRequestImpl, weblogic.servlet.internal.ServletResponseImpl)
javax.servlet.Servlet
weblogic.servlet.internal.ServletStubImpl.getServlet(weblogic.servlet.intern
al.ServletRequestImpl, weblogic.servlet.internal.ServletResponseImpl)
void
weblogic.servlet.internal.ServletStubImpl.invokeServlet(weblogic.servlet.int
ernal.ServletRequestImpl, weblogic.servlet.internal.ServletResponseImpl)
void
weblogic.servlet.internal.ServletStubImpl.invokeServlet(weblogic.servlet.int
ernal.ServletRequestImpl, weblogic.servlet.internal.ServletResponseImpl)
void
weblogic.servlet.internal.ServletContextImpl.invokeServlet(weblogic.servlet.
internal.ServletRequestImpl, weblogic.servlet.internal.ServletResponseImpl,
weblogic.servlet.internal.ServletStubImpl)
void
weblogic.servlet.internal.ServletContextImpl.invokeServlet(weblogic.servlet.
internal.ServletRequestImpl, weblogic.servlet.internal.ServletResponseImpl)
int
weblogic.servlet.internal.ServletContextManager.invokeServlet(weblogic.socke
t.MuxableSocketHTTP)
int weblogic.socket.MuxableSocketHTTP.invokeServlet()
void
weblogic.socket.MuxableSocketHTTP.execute(weblogic.kernel.ExecuteThread)
void weblogic.kernel.ExecuteThread.run()
Mo Jan 08 12:00:03 GMT+01:00 2001:<E> <ServletContext-General> Servlet
failed with Exception
java.io.IOException: Compiler failed
executable.exec([Ljava.lang.String;[d:/java/jdk1.2/bin/javac.exe, -classpath
, "D:\Programme\IBM\VisualAge for
Java\ide\program\lib\rt.jar;.;d:\programme\ibm\visualage for
java\ide\project_resources\WebLogic Examples;d:\programme\ibm\visualage for
java\ide\project_resources\Weblogic Java 2
Classes;d:\programme\ibm\visualage for java\ide\project_resources\WebLogic
Java Enterprises Libraries;d:\programme\ibm\visualage for
java\ide\project_resources\WebLogic OCI;d:\programme\ibm\visualage for
java\ide\project_resources\WebLogic Server;d:\programme\ibm\visualage for
java\ide\project_resources\WebLogic Server
Classes;d:\programme\ibm\visualage for java\ide\project_resources\WebLogic
Support
Libraries;d:\java\bea51\classes\boot\;d:\java\bea51\classes\;d:\java\bea51\l
icense\;d:\java\bea51\myserver\serverclasses\;d:\java\bea51\lib\weblogicaux.
jar;d:\java\bea51\myserver\ejb_basic_containerManaged.jar;d:\java\bea51\myse
rver\ejb_extensions_readMostly.jar;d:\java\bea51\classes;D:\Java\bea51\myser
ver\tmp_deployments\ejbjar30505.jar;d:\java\bea51\myserver\servletclasses;D:
\Java\bea51\myserver\classfiles", -d, D:\Java\bea51\myserver\classfiles,
D:\Java\bea51\myserver\classfiles\jsp_servlet\_test.java])
java.lang.Throwable(java.lang.String)
java.lang.Exception(java.lang.String)
java.io.IOException(java.lang.String)
void
weblogic.utils.compiler.CompilerInvoker.compileMaybeExit(java.lang.String
void weblogic.utils.compiler.CompilerInvoker.compile()
void weblogic.servlet.jsp.JspStub.compilePage(java.lang.String,
javax.servlet.http.HttpServletRequest,
javax.servlet.http.HttpServletResponse, boolean)
void
weblogic.servlet.jsp.JspStub.prepareServlet(weblogic.servlet.internal.Servle
tRequestImpl, weblogic.servlet.internal.ServletResponseImpl)
javax.servlet.Servlet
weblogic.servlet.internal.ServletStubImpl.getServlet(weblogic.servlet.intern
al.ServletRequestImpl, weblogic.servlet.internal.ServletResponseImpl)
void
weblogic.servlet.internal.ServletStubImpl.invokeServlet(weblogic.servlet.int
ernal.ServletRequestImpl, weblogic.servlet.internal.ServletResponseImpl)
void
weblogic.servlet.internal.ServletStubImpl.invokeServlet(weblogic.servlet.int
ernal.ServletRequestImpl, weblogic.servlet.internal.ServletResponseImpl)
void
weblogic.servlet.internal.ServletContextImpl.invokeServlet(weblogic.servlet.
internal.ServletRequestImpl, weblogic.servlet.internal.ServletResponseImpl,
weblogic.servlet.internal.ServletStubImpl)
void
weblogic.servlet.internal.ServletContextImpl.invokeServlet(weblogic.servlet.
internal.ServletRequestImpl, weblogic.servlet.internal.ServletResponseImpl)
int
weblogic.servlet.internal.ServletContextManager.invokeServlet(weblogic.socke
t.MuxableSocketHTTP)
int weblogic.socket.MuxableSocketHTTP.invokeServlet()
void
weblogic.socket.MuxableSocketHTTP.execute(weblogic.kernel.ExecuteThread)
void weblogic.kernel.ExecuteThread.run() -
Visual Age 3.5.3 and WebLogic Integration Kit
I have Visual Age for Java Enterprise Edition v3.5.3
When I install WebLogic Integration Kit, i receive an alert message:
Visual Age for Java is not installed.
Can anyone say me if WebLogic Integration Kit found in Visual Age 3.5.3?
Israel Garcia Alesanco ([email protected])
Bilbomática S.A. (www.bilbomatica.es)
Licenciado Poza 55 4 planta
Tel. 94.427.63.08 Fax 94.427.15.47
48013 BILBAOIsrael,
The WebLogic Integration Kit is certified to work with VAJ 3.5 and not VAJ
3.5.3. The kit supporting VAJ 3.5.3 should be available on BEA's download
site sometime by the end of this week.
Thanks,
Nirav.
"Israel García" wrote:
I have Visual Age for Java Enterprise Edition v3.5.3
When I install WebLogic Integration Kit, i receive an alert message:
Visual Age for Java is not installed.
Can anyone say me if WebLogic Integration Kit found in Visual Age 3.5.3?
Israel Garcia Alesanco ([email protected])
Bilbomática S.A. (www.bilbomatica.es)
Licenciado Poza 55 4 planta
Tel. 94.427.63.08 Fax 94.427.15.47
48013 BILBAO--
Nirav Chanchani
BEA Systems, Inc. -
Error using CR 11.5 with dynamic cascading prompts and SAP Integr.Kit XI R2
Hi,
we are using the SAP Integration Kit XI R2 (patched up to FP4.3) in order to report SAP BW data (BW 3.5) in Crystal Reports 11.5 (SP 4). In order to access the stored BEx Queries we use either the SAP BW Query or the SAP BW MDX Query Driver (_we DO NOT use any universes_). Everything seems to work fine ex cept when we want to use dynamic cascading LOVs within CR. For example when a user runs a report she/he should select first a customer group (0CUST_GROUP prompt) and then the customer (0DEBITOR). Defining the cascading prompts with dynamic LOVs is no problem in CR and when the report runs (either in CR Designer or in InfoView) both prompts appear. Still when we do a selection for the first prompt (0CUST_GROUP) we get a 0x8004380D error with the text message stating that the system is not able to retrieve the LOV data (I guess for the 0DEBITOR prompt). Please note that we do not get a corba error and no firewalls are activated. We checked the trace files of the page server and found out that there was an error calling the createRowsetCursor function within enginekernel.cpp.
Any hints on our case will be mostly appreciated. We have the feeling that we are hitting a bug here but maybe we are overseeing something.
Cheers
Stratos
PS: Please note that if we access directly the ODS Object (SAP ODS driver) the dynamic cascading prompts on exactly the same InfoObject (or better their keys in the ODS) work without a problem.Hi Stratos
You can define LOV's in universes but unfortunately you can not use universes based on SAP in Crystal Reports.
You can define parameters in the Bex query which are passed on to Crystal Reports, so you don't need to define them in the Business Objects tools. Please have a look at the SAP Integration Kit user's guide
Roland -
Crystal Reports 10 and SAP Integration Kit
Hi,
we have a customer using crystal reports 10. Is it possible to use the SAP Integration Kit for version 10? When installing the Kit (Version XI 3.0) there is an error that we do not use CR 2008.
Thanks in advice
ClaudiaHello Claudia,
the SAP Integration Kit is always dependent on the product releases. there is a Crystal Reports v 10 and Crystal Enterprise v 10 and a SAP Integration Kit v 10 - but keep in mind that v 10 is already out of support.
Crystal Reports 2008 requires the SAP Integration Kit XI 3.x and BusinessObjects Enterprise XI 3.x
Ingo -
BOE 3.1 and SAP Integration Kits 3.1
I have installed BOE XIR 2, and DataService 3.0 on this machine (machine A).
I dont use much on XIR2.
I build some simple data flow in DataService 3.0, the DataService use the BOE 3.0 that sitting on the other machine (machine B).
Now I have downloaded new BOE 3.1 and would like to install the SAP Integration Kit 3.1 on mcahine A.
I have uninstalled BOE XIR 2 from machine A. (I noticed that the Tomcat is still there, can't be uninstalled).
I have now installed BOE 3.1 on mahcine A. Everyting seem OK, and I point back to use the existing Tomcat.
Installation finish, no error.
I now go to Start ->Program ->BOE 3.1 menu, I dont get to see the BOE InfoView and BOE CMS.
When I click on the Start ->Program ->BOE 3.1 ->Designer, on the Designer logon screen, it is Machine B that appear on the System field. When I change to Machine A manually and logon, I have error message.
Any idea why the BOE 3.1 InfoView and CMS is missing?
Why it is machine B appear as the System?
Why I can't change manually to machine A? It seem like the CMS is missing, but why?
Please help, need this to demo the client...no
-
Install fails for Weblogic 5.1 and VisualAge 3.5 integration kit
I am having some trouble installing the integration kit.
In the BEA kit install guide page 5, step 2., It says " delete javax.rmi and javax.transaction".hai , i am mailing regarding the memory refrence error shown by Dr watson in nt when you were running the wl server5.0posted by you in the bea site. in novemberi face the same error when i run wl 6.0 console . If you have a solution to the problem please reply back regarding the samebyethomas
-
BOXI r2 SP2 and Integration KIt
Where can i find Integration kit sp2 for BOXI rel.2 sp2 . I 'm looking for it everywhere!!!! SAP marketplace,sdn,...
Hi Alessandro
I can understand your frustration as it is not accessible through the normal download pages on Service Market Place where you can only find the Integration Kit for XI 3.0.
You can find it here though:
Log on to Service Market Place > Downloads > Business Objects Download > Installations and Upgrades > service.sap.com / installations (click link i content area) > Entry by Application Group, and then go this way: Installations and Upgrades > BusinessObjects packages and products > BOBJ INTGR.FOR SAP > BOBJ INTGR. FOR SAP XI R2.
Best regards,
Martin Søgaard -
Error after uninstalling the SAP Integration Kit XI 3.0 on Unix
Hi all,
I have uninstalled the SAP Integration Kit XI 3.0 on a single solaris server installation. Uninstall was done exactly as instructed in the manual and everything looked ok.
Now when I try to go to the login page of CMC or InfoView I get an error:
type Status report
message /PartnerPlatformService/service/app/logon.do
description The requested resource (/PartnerPlatformService/service/app/logon.do) is not available.
Is the login page trying to look for the SAP authentication page that was removed ?
Is there some configuration still remaining somewhere that needs to be removed so I get the old login page back ?
Thanks for ideas, TimoThanks for pointing to the right direction. I changed the tomcat webapps web.xml file parameter and it was enought to start working again.
<context-param>
<param-name>config.logon.service.context</param-name>
<param-value>/PlatformServices</param-value>
</context-param> -
Error while Importing Integration kit Transport Requets into SAP ECC 5.0
HI ,
1. AT BO side -> I can see the many roles, but under 'role import tab' in CMC when i add any 'role' and click on update button,
system showing an error as below .
"Failed while trying to get user list using class CSecRfcRemoteUsersActGrp in method CSecSAPR3Binding::GetUsersInternal(). Error code: 3. Description: Syntax error in program /CRYSTAL/SAPLSECURITY .. "
2. After successfull installation of integration kit on windows 2008 server, i have imported the transport request into SAP ECC
5.0 When i imported open sql connectivity transport request, i got error mesage . The error message number is 8 and it came
for Generation of programs and screens. i have installed sap gui 710 ( verion : 7100.1.0.1027).
I also transported remaining transport request (infoset, row level, cluster definition, security functions) but all these request
contain similar error. Now when i try to login into sap its going dump.Is there any possibility of reverting back the transport
requests.
Pls help me to fix these issues.
Edited by: sheshikanth reddy on Apr 14, 2010 2:15 AMHi ingo,
Now i can able to transport successfully after following the order.
Thank you very much
Edited by: sheshikanth reddy on Apr 14, 2010 11:46 PM
Earlier i have imported non unicode request numbers into sap unicode system.
tats why i got error.
Now i have imported unicode request number to unicode sap system with sequence.
Edited by: sheshikanth reddy on Apr 15, 2010 12:19 AM -
Error while updating SAP Integration Kit XI 3.1 to SP3
Dear All,
I have updated BusinessObjects Enterprise XI 3.1 and Integration Kits for SAP XI 3.1 to SP3.
The update of BusinessObjects Enterprise XI 3.1 was fine. While updating IK for SAP, the installation shown the following error
sapweb_rri.dll failed to register.
sapweb_parameter.dll failed to register
Then I completed the installation by 'Ignore' ing the above installer informations.
Now I am getting the following error
"Account information not recognized: Plugin Manager error: Unable to locate the requested plugin secSAPR3 on the server. (FWB 00006)"
Before the update, the setup was working fine.
Does this ignored error caused the problem?
Please help me to resolve the issue.
Thanks and Regards,
YuvarajThank you.
I have the following questions, for this full installation of IK SP3,
I have imported transports from IK XI 3.1 for R/3 and BO connection in R/3.
Does the transport that comes with IK SP3 is modified?
And also some reports are developed based on the datas from R/3.
Does this complete uninstallation of IK affects the existing contents?
Regards,
Yuvaraj. -
SAP Integration kit for BO XIR2 with Crystal XI for BI 7.0 Front end
Hello Team,
We are in a little fix.
We have BOE XIR2, Crystal XI and working with old version of BI front-end 3.5.
We are upgrading to BI 7.0 frontend, but I am not able to trace out the SAP Integration kit for combination of BOE XIR2, Crystal XI and BI7.0.
Is such a thing available, If yes can someone send a link to that.
Regards
Lalan KanadeHi,
Thanks for the quick reply
I could trace this document. "BusinessObjects Enterprise XI Release 2 SP3 for Windows"
I checked in "Supported Data Sources for Crystal Rep" section, extract below
SAP BW Server 3.0b SAP GUI 620 or 640
SAP BW Server 3.1c SAP GUI 620 or 640
SAP BW Server 3.5 SAP GUI 640.
But we are using BW Server 7.0 with GUI 7.1 and that working fine even with BOXIR2 and Crystal XI with Old Front End for BI 3.X.
But when we are testing with BOXIR2 and Crystal XI with BI New Front End 7.0 its missing components from the query output.
So the SAP Integration kIt seems old & we need a new Kit which would work with BI New Front End 7.0.
Any suggestions on that
Regards
Lalan
Maybe you are looking for
-
Hello everyone, I'm facing a situation when every time I receive an invitation comes from a different time zone neither iCal, iPhone’s Calendar nor iPad’s Calendar recognizes it correclty. Below there are a couple of examples, but before, a few infor
-
Files no longer show up on server
I have a PC server with all my files on it. I work on the files from the mac. It has to be set up this way for our RIP to access the files. My question is some files are no longer showing up on the mac. They are on the PC and when I delete and copy t
-
Java.lang.UnsatisfiedLinkError + servlets
Hi, While accessing JNI methods thru Servlets, am getting java.lang.UnsatisfiedLinkError. Am I missing on some configuration/deployement steps. Please let me know your thoughts. N
-
Dropped frames on the timeline... why ??
Hi everybody, This is my first post here... i'm French, so please excuse my english I have a little but very annoying problem on Final Cut Pro 7. I work with a Canon HV40, HDV 1080 25p. The FCP project is set on HDV 1080 25p. When i play the imported
-
Has anyone tried getting a new phone and then giving your old phone to someone else? because if you have, did you deactivate your iphone on your support profile before so? and will the person who gets it be able to activate it as thiers again afterwa