Integration Microsoft Exchange with Portal

Hi, i need help.
I try connect MS Exchange 2007 with Portal, found the documentation only MS exchange 2003, but need documentation for MS Exchange 2007.
Another problem have is that my S.O is Windows 2008 server and no exist documentation. Please can you tell me the links (URL) where find documentation
My system is:
MS exchange 2007
Microsoft Windows 2008 server
Portal 7.0 EHP 1
Thanks.

Please, do not cross post: Integration Microsoft Exchange with Portal
Have you checked the installation guides available at [SMP|https://service.sap.com/instguides] or the [PAM|https://service.sap.com/pam] for more information about Windows 2008?
br,
Tobias

Similar Messages

Cannot open your default e-mail folders. You must connect to Microsoft Exchange with the current profile before you can synchronize your folders with your Outlook data file (.ost)

Fresh installation of Exchange Server 2013 on Windows Server 2012.
Our first test account cannot access their email via Outlook but can access fine through OWA. The following message appears - "Cannot open your default e-mail folders. You must connect to Microsoft Exchange with the current profile before you can synchronize
your folders with your Outlook data file (.ost)" is displayed.
If I turn off cached Exchange mode, setting the email account to not
cache does not resolve the issue and i get a new error message - "Cannot open your default e-mail folders. The file (path\profile name).ost is not an Outlook data file (.ost). Very odd since it creates its own .ost file when you run it for the first
time.
I cleared the appdata local Outlook folder and I tested on a new laptop that has never connected to Outlook, same error message on any system.
Microsoft Exchange RPC Client Access service is running.
No warning, error or critical messages in the eventlog, it's like the healthiest server alive.
Any help would be greatly appreciated. I haven't encountered this issue with previous versions of Exchange.

So it looks like a lot of people are having this issue and seeing how Exchange 2013 is still new (relatively to the world) there isn't much data around to answer this. I've spend ALOT of time trying to figure this out.
Here is the answer. :) - No I don't know all but I'm going to try to give you the most reasonable answer to this issue, in a most logical way.
First thing I did when I was troubleshooting this issue is that I ignored Martina Miskovic's suggestion for Step4 http://technet.microsoft.com/library/jj218640(EXCHG.150)because it didn't make sense to me because I was trying to connect
Outlook not outside the LAN but actually inside. However, Martina's suggestion does fix the issue if it's applied in the correct context.
This is where the plot thickens (it's stew). She failed to mention that things like SSL (which I configure practically useless - anyone who ever worked in a business environment where the owner pretty much trusts anyone in the company, otherwise they don't
work there - very good business practice in my eyes btw, can confirm that...) are some sort of fetish with Microsoft lately. Exchange 2013 was no exception.
In exchange 2003, exchange 2007 and exchange 2010 - you could install it and then go to outlook and set it up. And when outlook manual Microsoft Exchange profile would ask you for server name, you would give it and give the name of the person who you setting
up - as long as machine is on the domain, not much more is needed. IT JUST WORKS! :) What a concept, if the person already on premises of the business - GIVE HIM ACCESS. I guess that was too logical for Microsoft. Now if you're off premises you can use things
like OutlookAnywhere - which I might add had their place under that scenario.
In Exchange 2013, the world changed. Ofcourse Microsoft doesn't feel like telling it in a plain english to people - I'm sure there is an article somewhere but I didn't find it. Exchange 2013 does not support direct configuration of Outlook like all of it's
previous versions. Did you jaw drop? Mine did when I realized it. So now when you are asked for your server name in manual outlook set up and you give it Exchange2013.yourdomain.local - it says cannot connect to it. This happens because ALL - INTERNAL AND
EXTERNAL connection are now handled via OutlookAnywhere. You can't even disable that feature and have it function the reasonable way.
So now the question still remains - how do you configure outlook. Well under server properties there is this nice section called Outlook anywhere. You have a chance to configure it's External and Internal address. This is another thing that should be logical
but it didn't work that way for me. When I configured the external address different from the internal - it didn't work. So I strongly suggest you get it working with the same internal address first and then ponder how you want to make it work for the outside
users.
Now that you have this set up you have to go to virtual directories and configure the external and internal address there - this is actually what the Step 4 that Martina was refering to has you do.
Both external and internal address are now the same and you think you can configure your outlook manually - think again. One of the most lovely features of Outlook Anywhere, and the reason why I had never used it in the past is that it requires a TRUSTED
certificate.
See so it's not that exchange 2013 requires a trusted certificate - it's that exchange 2013 lacks the feature that was there since Windows 2000 and Exchange 5.5.
So it's time for you to install an Active Direction Certificate Authority. Refer to this wonderful article for exact steps - http://careexchange.in/how-to-install-certificate-authority-on-windows-server-2012/
Now even after you do that - it won't work because you have to add the base private key certificate, which you can download now from your internal certsrv site, to Default Domain Policy (AND yes some people claim NEVER mess with the Default Domain Policy,
always make an addition one... it's up to you - I don't see direct harm if you know what you want to accomplish) see this: http://technet.microsoft.com/en-us/library/cc738131%28v=ws.10%29.aspx if you want to know exact steps.
This is the moment of ZEN! :) Do you feel the excitement? After all it is your first time. Before we get too excited lets first request and then install the certificate to actual Exchange via the gui and assign it to all the services you can (IIS, SMTP and
there is a 3rd - I forgot, but you get the idea).
Now go to your client machine where you have the outlook open, browse to your exchange server via https://exchang2013/ in IE and if you don't get any certificate errors - it's good. If you do run on hte client and the server: gpupdate /force This will refresh
the policy. Don't try to manually install the certificate from Exchange's website on the client. If you wanna do something manually to it to the base certificate from the private key but if you added it to the domain policy you shouldn't have to do it.
Basically the idea is to make sure you have CA and that CA allows you to browse to exchange and you get no cert error and you can look at the cert and see that's from a domain CA.
NOW, you can configure your outlook. EASY grasshoppa - not the manual way. WHY? Cause the automatic way will now work. :) Let it discover that exachange and populate it all - and tell you I'm happy! :)
Open Outlook - BOOM! It works... Was it as good for you as it was for me?
You may ask, why can't I just configure it by manual - you CAN. It's just a nightmare. Go ahead and open the settings of the account that got auto configed... How do you like that server name? It should read something like [email protected]
and if you go to advanced and then connection tab - you'll see Outlook Anywhere is checked as well. Look at the settings - there is the name of the server, FQDN I might add. It's there in 2 places and one has that Mtdd-something:Exchange2013.yourdomain.local.
So what is that GUID in the server name and where does it come from. It's the identity of the user's mailbox so for every user that setting will be different but you can figure it out via the console on the Exchange server itself - if you wish.
Also a note, if your SSL certs have any trouble - it will just act like outlook can't connect to the exchange server even though it just declines the connection cause the cert/cert authority is not trusted.
So in short Outlook Anywhere is EVERYWHERE! And it has barely any gui or config and you just supposed to magically know that kind of generic error messages mean what... Server names are now GUIDs of the [email protected] - THAT MAKES PERFECT
SENSE MICROSOFT! ...and you have to manage certs... and the only place where you gonna find the name of the server is inside the d*** Outlook Anywhere settings in the config tab, un it's own config button - CAN WE PUT THE CONFIG ANY FURTHER!
Frustrating beyond reason - that should be Exchange's new slogan...
Hope this will help people in the future and won't get delete because it's bad PR for Microsoft.
PS
ALSO if you want to pick a fight with me about how SSL is more secure... I don't wanna hear it - go somewhere else...

Cannot Start Microsoft Outlook. Cannot open the Outlook Window. The set fo folders cannot be opened. You must connect to Microsoft Exchange with the current profil

Cannot Start Microsoft Outlook. Cannot open the Outlook Window. The set fo folders cannot be opened. You must connect to Microsoft Exchange with the current profile before you can synchronize your folders with your Outlook data file (.ost)
OK. This is a new outlook setup on a laptop. The mail account is on a MS Exchange Server 2010. The user can log on to their laptop no problem with their AD login and password. To setup the outlook profile we have checked the name OK. When we click finish
and try to start outlook we get the above error message. It is driving me pots as I have tried also of things. I have tried to connect without catching the files. The error message then says that the Exchange Server is down, yet we checked the name OK and
I can log on to the MS Exchange server and see the setup.
What else is it that I need to look at as I have tried everything. I will add that they one service I see not running is the Exchange RPC service. If I try to start it, it fails saying Some services stop automatically if they are not in use by other services
or programs.
What can I do?

The major cause of this problem is a corrupted Navigation Pane settings file – profilename.xml, where “profilename” is the name of your Outlook profile. A good sign that the
file is corrupted is when the size of the file is shown 0 KB. No one knows the precise reason why this takes place, but all versions of Outlook from 2003 to 2013 may get affected.
Other causes may be when you run Outlook in the compatibility mode, or if you are using a profile generated in an older Outlook version, or if the Outlook data file (.pst or .ost)
was removed or damaged as the result of faulty uninstallation or reinstallation of MS Outlook.
Follow the steps given below to resolve this problem
1. Recover Navigation Pane configuration file
2. Repair your Outlook PST file using Inbox Repair tool
3. Create a new Outlook profil and import data from the old PST file
4. Turn off Compatibility Mode
5. Start Outlook in Safe Mode
For more info, you can visit http://www.ablebits.com/office-addins-blog/2013/12/06/cannot-start-microsoft-outlook-solutions/

Steps for Integration of WebEx with Portal

Hi
I have requirement of integrating the WebEx with portal.
I am completely new to this.
Can any body tell me step by step implementation of this process . Does any document available to do this.
What are the prequisites required to integrate.
our portal version is 7.0
Does webEx need to be installed?
what is the procedure.
Regards
Vijay

Hi Vijay,
please take a look at [Activating Synchronous Collaboration Service Types|http://help.sap.com/saphelp_nw70/helpdata/en/de/bd2cf14c05d54cb766ce15a30d8063/frameset.htm], [Service Providers|http://help.sap.com/saphelp_nw70/helpdata/en/2f/4c209ef6504147aa8df54298a5cd8c/frameset.htm] and [Using WebEx Meeting|http://help.sap.com/saphelp_nw70/helpdata/en/62/58e310295d4b048a6b350de7a97749/frameset.htm].
Regards,
Holger.

Microsoft exchange with v10.8.2

looking for directions on how to use microsoft exchange with v10.8.2. I have directions for v10.6 but its not working.

I had the same issue with a Thinkpad X200s laptop's built-in MM keys plus an old Microsoft Natural Keyboard Pro's MM keys, and found this solution in my bookmarks which is working great for me in Vista 64 + iTunes 8.2.1.6 with both sets of keys:
http://www.everythingitunes.com/os/windows/2008-01-04/mmkeysdll/
It had also worked a year ago on Vista 32 for a Dell M1330. Very easy too -- I just placed the .dll in the Plugins directory and restarted iTunes.

Integrating oracle iStore with portal

Hi,
We need to build a B2C product catalog. I need answers to a couple of the questions listed below:
1.Is there any inbuilt commerce functionality present in Oracle 9ias Portal?
2. Is there any third party product available for building a product catalog of say eg. shoes?
3. Is it correct to say that oralce iStore is the ans. to building the product catalog?
4. what are the integration issues for integrating oracle iStore with portal?
Prompt reply would be a great help.
Thanks in advance.
Ankita

Hi Kishore,
Here you find information on integrating Reports with Portal: Oracle Application Server Reports Services Publishing Reports to the Web.
Peter

Integrating microsoft exchange server into portal

Hi All,
can any one suggest me detailed procedure for integrating micorsoft exchange server(MS Outlook) into portal.
I searched in the SDN , i got some idea, but it is not giving detailed procedure.
please explain in detail so that my Outlook will come into portal so that i can check my mails from portal itself.
Thank in Adncance
Bala

Hi bala,
See the following doc:
<a href="https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/08def089-0a01-0010-9c82-ee2040b4eced">HOW TO INTEGRATE MICROSOFT EXCHANGE SERVER INTO SAP ENTERPRISE PORTAL</a>
Have a look at the following threads:
<a href="https://www.sdn.sap.com/irj/sdn/thread?threadID=82871">https://www.sdn.sap.com/irj/sdn/thread?threadID=82871</a>
<a href="https://www.sdn.sap.com/irj/sdn/thread?threadID=305487">https://www.sdn.sap.com/irj/sdn/thread?threadID=305487</a>
Some more related threads are:
<a href="https://www.sdn.sap.com/irj/sdn/thread?threadID=40895">https://www.sdn.sap.com/irj/sdn/thread?threadID=40895</a>
<a href="https://www.sdn.sap.com/irj/sdn/thread?threadID=2976">https://www.sdn.sap.com/irj/sdn/thread?threadID=2976</a>
<a href="https://www.sdn.sap.com/irj/sdn/thread?threadID=148434">https://www.sdn.sap.com/irj/sdn/thread?threadID=148434</a>
<a href="https://www.sdn.sap.com/irj/sdn/thread?threadID=8179">https://www.sdn.sap.com/irj/sdn/thread?threadID=8179</a>
Bye
Ankur
Do reward points if it helps!!

Trouble setting up microsoft exchange with comcast e-mail...

I have tried several times to set up a Microsoft Exchange on my iPhone4, even called Comcast and obtained the Domain &Mail Server names, as well as other info not asked for in set up. Each time I'm told that the phone was "unable to verify". Can someone please help?
Thanks
Mike

Hi, I just got an iPhone4 (at last) and had the same problem - I couldnt not set up my Hotmail account as my default e-mail on the phone. I tried setting it up several times through the Microsoft Exchange option with no luck for the reason detailed by other posters. I set up my gmail account as the default and lived with it for a few days and then having re-read the posts on here in more depth I managed to fix it. I deleted my gmal account from the phone, selected 'other accounts' from the menu, typed in my hotmail details and Bingo! All fixed and functional and so easy to do that even this technophobe managed it.

Problem in Integrating Existing Application with Portal

I have my existing application. When i tried to integrate it with portal by URLScrapper Channel, my existing applications are logging me out.
My existing applications have different user / password for logging into it. Once i try login, i am not able to log into it. I hope there is some problem in session. Can anybody tell me how can rectify it.

Guys can u explain ,how to set the cookies in the session
Bcoz i am also facing the same problem when i am integrating the portal with my application.
I am able to login to the application , but when i do some operation it logs me out of the appliation .
guys can u throw light on this issue.

Integrating weblogic server with portal

Hi Friends,
Can any one tell me the procedure how to Integrate application server like weblogic with portal.
Thanks

Hi Venigalla,
FPN is the solution!
Setting up a federated portal network is comparable to connecting your portal to a u201Cnormalu201D backend system. The steps of configuring a FPN in a nutshell are:
-->Setting proxy settings
-->Creating trust / single sign-on between portals in the federation
-->Creating a producer system on the consumer portal
Depending on your overall portal landscape the complexity of configuration steps might vary.
Kindly go through the guides (PDF documents) in the links below:
1. How to set up Landscape for Federated Portal Network:
Content Sharing in SAP NetWeaver Portal
2. SAP NetWeaver Portal WSRP Support:
Content Sharing in SAP NetWeaver Portal
3. Activities for Implementing Federated Portal Network - Step by Step (Blog):
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/70191d1e-2bd1-2a10-d9b7-ba19500da527
4. SDN page on WSRP Application Sharing:
/docs/DOC-8384#section6
5. SDN page on Configuring a Federated Portal Network:
Configuring a Federated Portal Network
These links provide all information on FPN.
Hope it helps you.
Regards,
Anagha

!!! Integration UWC Webmail with Portal Server

Hello There...
How can I integrate UWC Webmail with Portal Server. I"m using SJS Portal Server 6 2005Q1. I've configured a CHANNEL extending a IFRAME provider in order to open the webmail in the same window. But when I click on the "UWC Webmail" tab the Portal Server gets the user credentials and starts loading the webmail and stops without any error. If I open another window or tab it works proving the authentication process works fine.
Thanks in advance...
Jeff!

Hi Jeff,
Have you tried using the UWC channels that the portal ships out of the box?
Portal Server 6 2005Q1 ships with a channel - UWCMail. Add this channel to your desktop, and provide the Messaging server details and user credentials in the channel edit screen. This channel will display a list of emails and also provide links to open the UWC webmail.
Look at the "To Configure New Communications Express Channels" section of this guide - http://docs.sun.com/source/819-2201/index.html. The communications products (Messaging, Calendar, UWC) will have to configured as explained in this guide for the single signon to work.
Butwhen I click on the "UWC Webmail" tab the Portal Server gets the user credentials and starts loading the webmail and stops without any error.I'm not clear what you mean by this, so can't comment. A little more detail will help.

Integrating Microsoft Lync with Web Applications

Hi,
Can you please tell, is it possible to integrate Microsoft Lync with the web applications. If so, can you please tell how to proceed with it ?
Thanks.

Hi BarryBenson,
I suggest that you post this on MSDN forum so
that you can get More relevant information and help with the process. Sorry for any inconvenience this caused. Thanks for your understanding.
https://social.msdn.microsoft.com/Forums/office/en-US/home?forum=ucmanagedsdk
Best regards,
Eric

You must connect to Microsoft Exchange with your current profile before you can synchronize your folders with your outlook data file (.ost).... OWA works but outlook 2013 does not, exchange server 2013 on Server standard 2012

I have read a lot of articles and tried a lot of things, but I cannot get outlook to connect to my exchange server. This is a test environment, I have tried making my own certificate and signing it through my own CA to no avail. I have completely disabled
windows firewall and stopped the service. I can ping between the two just fine by name or IP. I've tried not using cached mode, creating new profiles in outlook etc. I tried setting my CertPrincipalName to my FQDN in exchange powershell.
I am not an expert with exchange at all, but I feel like this should work with little to no configuration, instead I've wasted days on this. Half of the articles I've read don't seem to have solutions, and the other half have solutions that are not working
for me.
I can access OWA and send emails on a client computer through OWA with no problems.
I am running a test domain on the same network as my current exchange 2003/sbs 2003 active environment, I don't know why this would be an issue, but if it is I cannot figure out why. The only thing I can see holding me back right now is not having a signed
certificate from digicert etc, and an official internet domain set up, but I don't think either of those things matter in my situation.
Any help is greatly appreciated and I'll gladly provide any other information requested to solve this issue, thank you.

I have a similar setup and also have the same error. Did you find a solution for this?
In the managed availability - monitoring log I see the following errors:
EMSMDB.Connect() step of ComplianceOutlookLogonToArchiveRpcCtpProbe/Mailbox Database 0326619395 has failed against BESRVCOTEXCH001 proxying to BESRVCOTEXCH001 for [email protected].
Latency: 00:01:58.0150000
ActivityContext:
Outline: [15] RpcProxy connectivity verification; [117999][FAILED!] EMSMDB.Connect();
Likely root cause: HighLatency
Details:
Error: Error 0x71a (The remote procedure call was cancelled) from ClientAsyncCallState.CheckCompletion: RpcAsyncCompleteCall RPC EEInfo is not enabled or there is no error on this thread.
Log: RpcProxy connectivity verification
Task produced output:
- TaskStarted = 8/5/2014 7:47:11 AM
- TaskFinished = 8/5/2014 7:47:11 AM
- ErrorDetails =
- Latency = 00:00:00.0153816
- RpcProxyUrl = https://besrvcotexch001.hq.corp.cotrain.lan/rpc/[email protected]:6001
- ResponseStatusCode = OK
- RequestedRpcProxyAuthenticationTypes = ntlm
- RespondingHttpServer = BESRVCOTEXCH001
- RespondingRpcProxyServer = BESRVCOTEXCH001
- WebHeaderCollection = Persistent-Auth: true
X-DiagInfo: BESRVCOTEXCH001
X-BEServer: BESRVCOTEXCH001
Content-Length: 20
Content-Type: application/rpc
Date: Tue, 05 Aug 2014 05:47:11 GMT
Server: Microsoft-IIS/8.0
X-Powered-By: ASP.NET
RpcProxy connectivity verification completed successfully.
Mailbox logon verification
EMSMDB.Connect()
Task produced output:
- TaskStarted = 8/5/2014 7:47:11 AM
- TaskFinished = 8/5/2014 7:49:09 AM
- Exc
and
EMSMDB.Connect() step of OutlookRpcCtpProbe/Mailbox Database 0326619395 has failed against BESRVCOTEXCH001 proxying to BESRVCOTEXCH001 for [email protected].
Latency: 00:01:58.0250000
ActivityContext:
Outline: [13] RpcProxy connectivity verification; [118011][FAILED!] EMSMDB.Connect();
Likely root cause: HighLatency
Details:
Error: Error 0x71a (The remote procedure call was cancelled) from ClientAsyncCallState.CheckCompletion: RpcAsyncCompleteCall RPC EEInfo is not enabled or there is no error on this thread.
Log: RpcProxy connectivity verification
Task produced output:
- TaskStarted = 8/5/2014 7:23:20 AM
- TaskFinished = 8/5/2014 7:23:20 AM
- ErrorDetails =
- Latency = 00:00:00.0132417
- RpcProxyUrl = https://besrvcotexch001.hq.corp.cotrain.lan/rpc/[email protected]:6001
- ResponseStatusCode = OK
- RequestedRpcProxyAuthenticationTypes = ntlm
- RespondingHttpServer = BESRVCOTEXCH001
- RespondingRpcProxyServer = BESRVCOTEXCH001
- WebHeaderCollection = Persistent-Auth: true
X-DiagInfo: BESRVCOTEXCH001
X-BEServer: BESRVCOTEXCH001
Content-Length: 20
Content-Type: application/rpc
Date: Tue, 05 Aug 2014 05:23:20 GMT
Server: Microsoft-IIS/8.0
X-Powered-By: ASP.NET
RpcProxy connectivity verification completed successfully.
Mailbox logon verification
EMSMDB.Connect()
Task produced output:
- TaskStarted = 8/5/2014 7:23:20 AM
- TaskFinished = 8/5/2014 7:25:18 AM
- Exc

Need info on integration of Interwoven with portal

Hi,
Can somebody throw me some info on integration of interwoven
content express with weblogic portal 4.0.
1.The content express version is 1.1.0
2.The product to be integrated is Weblogic Portal 4.0
Thanx in advance
Prashanth Bhat

Hello,
You can connect sap to .net using .net libraries.
Kind regards
Ash Thomas
Sap Consultant
<a href=http://www.ashpeople.com>Ash People, Sap Consultants & Sap Consultancy</a>
<a href=http://www.ashpeople.com>www.ashpeople.com</a>

"Set of folders can not be opened. you must connect to microsoft exchange with current profile" geeting error while opening shared mailbox in outlook 2007

Hello Folks,
I am having exchange sever 2007 SP3. currently facing issue with one shared mailbox. One of the user is not able to open that mailbox from outlook 2010.
I can able to add that mailbox in the outlook but while opening the outlook it is asking for password. Outlook is not accepting user password for that mailbox. I have removed that user from full access and added that user again.
Other shared mailbox is working fine with same outlook profile and other user can also able to access that problematic shared mailbox.
Can anyone tell how to troubleshoot..?
Thanks, Chinmay.

Hi,
How do you open the shared mailbox in Outlook?
Please remove the shared mailbox from your Outlook totally and follow the following steps to open it:
1. Open Outlook, click File > Account Settings
> Account Settings.
2. Click Change and make sure Use Cached Exchange Mode is checked.
3. Click More Settings > Advanced tab.
4. Click Add next to Open these additional mailboxes and type the shared mailbox.
5. Click Ok > OK. Then the shared mailbox would be listed under the Navigation Pane.
Alternatively, we can create a new Outlook profile in Outlook and setup the shared mailbox. If it is asking for credentials, we can use the user account who have full access permission to the shared mailbox for authentication.
Regards,
Winnie Liang
TechNet Community Support

Integration Microsoft Exchange with Portal

Similar Messages

Maybe you are looking for