Integration Models and CCR simultaneously . .

Dear All,
i have 2 questions :
1) Why cant we run two Integration model simultaneously ???
and
2) Why cant we run CCR jobs in parallel with planning run ???
Please let me know your observations and opnions.
Regards,
Prasad

Hi Prasad,
Below are the answers for your queries.
1) Why cant we run two Integration model simultaneously ???
Integration models are the building blocks of both master data and transactional data for APO. It has to be contructed in APO in a sequence or in a order so that the updation of data can be performed sequentially. Each data will look into the update of other data. For example, we need to run integration model for location first and then location-product. The first run of location will create integration model for location in APO and then when we run subsequently the location-product, the combination will be referred in APO. If we run both location and location-product together, if location-product tries to update the APO system first(tables) before location data, then it will throw out error and cancel the model run. Hence, it is advisable to run the models one by one in a sequence.
2) Why can't we run CCR jobs in parallel with planning run?
CCR runs will compare the transactional data between both R/3 and APO and display the results. Planning run will perform the planning based on the selection conditions and it takes data from both R/3 and APO. The planning results will be transferred from APO to R/3 based on our customisation settings. During the time, when transfer of results happening, if paralley, comparison of both system data happens via CCR job, it will not give correct data or end up with errors or tries to cancel the job.
Hope this clarifies your question.
Please confirm whether you are clarified?
Regards
R. Senthil Mareeswaran.

Similar Messages

ECC upgrade and integration models

Experts,
We are upgrading our R3 system from 4.7 to ECC 6.0. We currently use SCM 5.1. During the upgrade from SCM 4.0 to 5.1, we had to do a re-initial transfer of our PDS integration models and a full curto_create, because the PDS tables had changed so much.
Is there a similar concern with an upgrade of R3 4.7 to ECC 6.0? Should I be doing a re-initial transfer of my integration models after the new ECC 6.0 system is built and released?
Thanks,
Matthew Bruckner

Hi Mathew,
Thanks for input. We are going for upgrade from SCM 4.1 to 7.0.
I never been upgrade of ECC. I think it is always better to do the initial transfer after upgrade.
Any way initial transfer will not create any issues.
Also check T.code SPAU to know the modification in the upgrade system from your old version.
I hope this helps.
Regards,
Kishore Reddy.

Reactivating integration models

Hello All,
I deactivated a big sales order integration model in my production system. While trying to reactivate the RIMODAC2 program is taking huge time(30 mins) to complete for 5 part-plant combination. I have around 100K part-plant combinations.
Is there a short cut to reactivate? If there is some alternate program to somehow reactivate the models.Any help will be greatly appreciated.
Anyone ever had such a situation? Any ideas.
Thanks and regards
Sanjeev

Hi Sanjeev,
There is no short cut but I can explain you a way.
First please confirm that only one transaction data integration model was inadvertantly deactivated.
Second - the steps I mention below should be carried out with "care" and after notifying business users suitably as you have to do this when there is mimimal activity in the system.
Broad steps:
1. Stop the CIF Queue by going into /SAPAPO/OM17
2. Activate the sales order integration model
3. There should be queues created inbound to your SCM/APO system (check in SMQ2)
4. Wait till all queues are created for the Sales Order Integration Model and make sure you see the CIF_GEN_EVENT queue (last queue which after going to SCM system returns to R/3 ERP system and marks the Integration Model as active)
5. Delete all the CIF queues for the Sales Order Integration Model except the CIF_GEN_EVENT queue.
6. Start the CIF Queue - the CIF-GEN_EVENT queue should process
7. Confirm that the Integration Model is activated in R/3
8. Run Delta Report (/SAPAPO/CCR) and resolve any differences
Disclaimer: This is not a SAP documented solution.
Hope this helps and works out for you.
Thanks,
Somnath

Excluding a specific material from integration model

Hi,
All materials corresponding to a particular MRP type are in an integration model and the model is active.
Request you to inform the steps to exlude a specific material from this integration model even if it is having the same MRP type.
With regards,
Mrinal

Mrinal,
CFM1>For each model affected, call up the affected variant. Go to the material field. Select Multiple selections ('right arrow'). Select the 'Exclude values' tab (third tab). Enter the material or materials to exclude. Copy (F10).
Save the variant. Execute the program to generate the (newly modified) model. Save the model.
Go to CFM2. Activate the newly generated model.
Repeat for other affected models.
If the material previously been contained in active models, then the newly excluded master and transactional data will still exist in SCM. If you find it to be necessary to delete these data, then you need to go over to SCM and perform the necessary steps. Start with /SAPAPO/CCR to delete transactional data, then go to WUF to delete master data.
Regards,
DB49

Is it possible to get integration model in CIF exit??

Hi experts,
I am new to CIF interface and i have a question about the interface enhancement () on ERP side.
The scenario is, we want to send purchase order from SAP ERP to SAP APO through CIF. There are 2 integration models and they are active at the same time. After entering the enhancement code (CIFPUR01), is it possible to know which integration model is used for current purchase order? In other word, in the exit CIFPUR01, is it possible to trace reversely which IM is used? Because we want to validate some fields per different different integration model.
Thanks so much.

Chirs
I do not know why you have two different IM's for PO's . Standard SAP recommendation is to have one integration model for each object type.
Coming back to your question please check the BadI CIF_INT_MODEL. It has a method MODIFY_OBJECT_LIST and one of the parameters of this method is "IS_CIF_IMODK" which identifies the IM name . Check whether this will serve your purpose
Thanks
Aparna

Integration model activation issue - After Prod to Quality refresh of R/3

Hi Guys,
Our R/3 quality system refreshed from production. Hence all the integration models Logical system pointing APO production system. Mistakenly I deactivated all the integration model in R/3 Q system which having APO Production logical system.
All the IM in R/3 quality system are inactive. When try send material getting error message "relavent location doesn't exist".
For that try to move the Location getting error message "Location already exist in APO Quality" system.
Now I want to active the all the Plant, material.etc integration models. Please let me know if any more information and help to overcome the issue.
Thanks,
Saravanan V

Saravanan
Make a table level change and set the integration model flag as active in the table CIF_IMOD. This will help you solve the issue .
Go to transaction SE16 . Give table name as CIF_IMOD. Give the name of you integration model and execute . Now all versions of that integration model will be displayed ( this will happen if you have many inactive versions and do not have the RIMODDEL program to delete inactive IM's) . Choose the latest version and go to change mode and set the value of "Entry is active" (technical name ACTIVE) field to I.
You can take help from development team if you do not have authorization to SE16
Thanks
Saradha

Integration model for sales orders failing repeatedly

Integration model for Sales Orders to APO is failing and in the CIF the error says "Customer requirement G BR 0082372353 900010 0000: liveCache problem, retu".
This error appears everytime you we run the integration model and it says in the Job log; ABAP/4 Processor: SYSTEM_CANCELED.
Note that this is "not" manually stopped but it still gives this error.

Hi Kailash,
Run /SAPAPO/SDRQCR21 in apo for the part contained in your delivery document, which is failing. While running the report, check the radiobutton, Build the requirements from Doc.Flow table. This will remove the inconsistencies remaining in the requirement table on R/3 side.
Try this and let us know, if you could succeed.
Regards
Sanjeev

EWM-ECC CIF Integration model

Hello All,
I want to tansfer data for plant,shipping point,customer and vendor from ERP to EWM.For this I have created Integration model.When I am trying to activate this I could not as I am getting message like'Queue for current initial data transfer is deregistered-Tgt System: APOCLNT800-Deregistered Queue' and hence Inbound queue blocked.
What could be the reason for this message. How to unblock this Inbound queqe?
Thanks,
Shailesh

Hi James,
Thanks. But this error is due to queue 'CFLD* System is not activating integration model and showing error like this'Operation terminated due to error (queue CFLD*, target system APOCLNT800)'
In SMQR I could not find this queue to acivate ,I tried in SMQ1/SMQ2, but I could not find this queue.
Do I need to create this queue? I yes I am unkown T.code for this. Do you have any idea?
Thanks,
Shailesh

Automatic generation of integration models

For Automatic Generation of integration Model we referred SAP Help and have done the settings as per SAP help.
     T code: CFC9
     Material Master Change Transfer         2 (BTE Transfer, Immediately)
     T code: BF11
     Maintained
     ND-APO     New Dimension PlugIn APO
     T code: SM30
     Table:     CIFIMODGEN
Connection pt     Counter     Program     Variant
MAT_INS        1     RIMODGEN     RSG_BTE
But system is not generating NEW Integration Model.
Reference from SAP Help:
Make the following settings to change to online transfer:
     Use transaction CFC9 to call the screen Change Target-System-Independent Settings in CIF. Under Change Transfer for Master Data, choose BTE Transfer, Immediately. As of SAP R/3 4.0B, you can make this setting in CIF Customizing in SAP R/3 under Basic Settings for the Data Transfer ® Configure Change Transfer for Master Data.
     Use transaction SM30 to call the screen Maintain Table Views: Initial Screen. Call table CIFIMODGEN. You see the screen Change View "Customizing Automatic Generation of Integration Models". You determine the procedure for adapting the integration model by making entries in this database table.

Did you run program RIMODGEN in SE38 with appropriate variant to generate new integration models ? The spro settings or CFC9 have nothing to do with generation of new integration models. try to do some forum search on Integration Models and you may get some clue.

Materials not in integration model

Something has happened in my R3/APO Development system where lots of Materials are not in any Integration Model. They should be, and checking in our prod system they are.
I've de-activated and re-activated Int Models but to no avail.
How can I check/update materials to be part of an Integration Model?

For material master integration, the indicator in MARC table should be set properly. During the integration model activation if the MARC table is locked for some reason, this does not happen.
Pl. refer to the following reports
RAPOKZFX - Set APO indicator in MARC table after activation
RCIFIMAX - Consistency between integration models and MARC table
RCIFMTDE - Log the deactivated material masters
Hope this helps!

Install instructions for Search Modeler and integrating with Apps 11i

Below are all the steps I took for creating integrating Search Modeler with an Oracle E-Business Suite 11.5.10.2 ATG RUP 7 instance called ERNIE.
Much thanks to Oracle Support ( Rajesh Ghosh, Vikas Soolapani and Roger Ford), as this simply wouldn't have been possible without them.
There are a few things in this document that may not be pertinent to your environment if you're doing this. I've made attempts to clarify those possibly optional sections in the documentation.
I've broken the document down into the following multiple parts
o Setting up a new RedHat 4.8 x86 server called ausSEARCHdev (The server is in AUStin, TX, is dedicated to SEARCH, and is for our DEV environment)
o SES (Secure Enterprise Search 10.1.8.2 install
o SES 10.1.8.4 patchset install
o SES CPU patch apply
o Standalone OC4J and ADF installation
o Search Modeler installation and configuration
o Configure ERNIE Apps instance to be on valid self-signed SSL certificate
o Import ERNIE SSL certificate into SES and Search Modeler
using aussearchdev initially
rh4 x86, default oracle build
** htop and collectl are open source free performance monitoring packages we utilize**
--start
install htop and collectl
wget http://dag.wieers.com/rpm/packages/htop/htop-0.7-1.el4.rf.i386.rpm
rpm -ivh htop-0.7-1.el4.rf.i386.rpm
wget http://downloads.sourceforge.net/project/collectl/collectl/collectl-3.4.0-4/collectl-3.4.0-4.noarch.rpm?use_mirror=voxel
rpm -ivh collectl-3.4.0-4.noarch.rpm
chkconfig collectl on
service collectl start
**We still need to install the necessary rpms so that collectl logs are compressed
--end
useradd -u 501 oracle
groupadd -g 504 dba
usermod -G 504 oracle
verification:
     [root@aussearchdev ~]# su - oracle
     [oracle@aussearchdev ~]$ id
     uid=501(oracle) gid=501(oracle) groups=501(oracle),504(dba)
passwd oracle
** /mnt/oraclebackup is a network dumpspot we use to hold Software installs, RPMs, etc
** /mnt/rpms is a network dumpspot we use to hold ISOs for OS software such as Redhat Linux
mkdir /mnt/oraclebackup
mkdir /mnt/rpms
add the following to /etc/fstab
XXXXXXX:/patches/oraclebackup /mnt/oraclebackup nfs defaults,hard,nolock 0 0
XXXXXXX:/esxpress/nfs /mnt/rpms nfs rw,addr=XXX.XXX.XXX.XXX 0 0
mount /mnt/rpms
Next need to install various oracle needed RPMs.
cd /mnt/rpms/rh40_upd8/RedHat/RPMS/
rpm -ivh perl-Compress-Zlib-1.42-1.el4.i386.rpm
rpm -ivh libaio-devel-0.3.105-2.i386.rpm
rpm -ivh sysstat-5.0.5-25.el4.i386.rpm
rpm -ivh unixODBC-devel-2.2.11-1.RHEL4.1.i386.rpm
service collectl restart
cd /tmp
wget http://oss.oracle.com/el4/oracle-validated/oracle-validated-1.0.0-18.el4.i386.rpm
rpm -ivh oracle-validated-1.0.0-18.el4.i386.rpm
Now we should have all the RPMs we need.
cd /etc/sysconfig/oracle-validated
./oracle-validated-verify
cd /var/log/oracle-validated/results
more orakernel.log
uname -a
should return 2.6.9 or higher
rpm -qa|grep gcc-
should return 3.4.3 or higher
rpm -qa|grep glibc
should return 2.3.4-2.9 or higher
rpm -qa|grep make
should return 3.80 or higher
rpm -qa|grep binutils
should return 2.15.92.0.2 or higher
rpm -qa|grep openmotif
should return 2.2.3-9.RHEL4.1 or higher
rpm -qa|grep compat-db
should return 4.1.25-9 or higher
rpm -qa|grep setarch
should return 1.6-1 or higher
cat /proc/sys/kernel/sem
should return 250 32000 100 128 or higher (250 32000 100 142 in our case)
cat /proc/sys/kernel/shmall (1073741824 in our case)
should return 2097152 or higher
cat /proc/sys/kernel/shmmax
should return half the size of physical memory (4294967295 in our case - NO LARGER on 32-bit OS)
cat /proc/sys/kernel/shmmni
should return 4096
cat /proc/sys/fs/file-max
should return 65536 (327679 in our case)
cat /proc/sys/net/ipv4/ip_local_port_range
should return 1024 65000
values in /etc/security/limits.conf set by oracle-validated rpm, no changes necessary
add the following line to /etc/pam.d/login
session required /lib/security/pam_limits.so
add the following to /etc/profile
if [ $USER = "oracle" ]; then
if [ $SHELL = "/bin/ksh" ]; then
ulimit -p 16384
ulimit -n 65536
else
ulimit -u 16384 -n 65536
fi
fi
mkdir -p /d01/oracle
chmod 777 /d01/oracle
init 6 the box (aka reboot)
Time to start the SES 10.1.8.2 installer
running SES 10.1.8.2 installer
as oracle
cd /mnt/oraclebackup/deathstar_patches/SES/SES10182
./runInstaller
search server name sesprod
administrative password XXXXXXXX for dev,
http port 7777
destination path /d01/oracle/10.1.8/sesdev (dev)
data storage path /d01/oracle/sesdevdata (dev)
next
inventory /d01/oracle/oraInventory
dba group
run orainstroot.sh as requested
continue
all tests should pass, continue
finished clean
tried logging in to admin console at http://aussearchdev:7777/search/admin - worked fine
tried bringing up search query at http://aussearchdev:7777/search/query/search - worked fine
Now we need to get to 10.1.8.4 of SES
(yes, you need to keep the system up)
cd /mnt/oraclebackup/deathstar_patches/SES/SES10184/ses_10184pst_linux/
./runInstaller
Destination, choose sesdev
Next
Patchset successful
tried logging in to admin console at http://aussearchdev:7777/search/admin - worked fine
tried bringing up search query at http://aussearchdev:7777/search/query/search - worked fine
Apply CPU Patch to SES
CPU JAN 10 says patch 9119261 is required - but patch requires extended support contract
CPU OCT 09 says patch 8836540 is required - but patch requires extended support contract
CPU JUL 09 says patch 8534394 is required - but patch requires extended support contract
CPU APR 09 says patch 8290534 is required - and you can actually download it
Need opatch from 6880880
cp -r /mnt/oraclebackup/deathstar_patches/SES/CPUAPR09/OPatch $ORACLE_HOME
export PATH=$ORACLE_HOME/OPatch:$PATH
shut down everything
cd $ORACLE_HOME/bin
./searchctl stopall
cd /mnt/oraclebackup/deathstar_patches/SES/CPUAPR09/8290534
opatch apply
cd $ORACLE_HOME/cpu/CPUApr2009
**Note: your sys password is what you set for your administrative password above
sqlplus "sys/XXXXXX" as sysdba;
startup
@catcpu
@?/rdbms/admin/utlrp
shutdown immediate
exit
cd /d01/oracle/10.1.8/sesdev/cpu/view_recompile/
sqlplus "sys/XXXXXXX" as sysdba;
startup upgrade;
@view_recompile_jan2008cpu.sql
@?/rdbms/admin/utlrp
shutdown immediate
cd /d01/oracle/10.1.8/sesdev/jdk/jre/lib/ext
mv mail.jar $HOME/mail.jar.backup02222010
mv mailapi.jar $HOME/mailapi.jar.back02222010
cp /d01/oracle/10.1.8/sesdev/search/lib/mail.jar .
SES 10.1.8.4 is now installed and updated with latest available CPU
tried logging in to admin console at http://aussearchdev:7777/search/admin - worked fine
tried bringing up search query at http://aussearchdev:7777/search/query/search - worked fine
we're going to go with the standalone OC4j 10.1.3.3 and Oracle ADF 10.1.3.3 method
The URLs for these products are
http://blogs.oracle.com/ebssearch/2009/10/available_now_oracle_search_modeler_11_for_oracle_e-business_suite_11i.html
and specifically
OC4J - http://download.oracle.com/otn/java/oc4j/101330/oc4j_extended_101330.zip
ADF - http://www.oracle.com/technology/software/products/jdev/htdocs/adfinstaller10133.html
OC4J install
First you need to have Java 1.5 on the machine. Latest is 1.5.0_22. Package is in /mnt/oraclebackup/deathstar_patches/SES
as root on aussearchdev
cd /usr/local
cp /mnt/oraclebackup/deathstar_patches/SES/jdk-1_5_0_22-linux-i586.bin .
chmod 700 jdk-1_5_0_22-linux-i586.bin
./jdk-1_5_0_22-linux-i586.bin
yes
install OC4J just by copying over the directory
as oracle on aussearchdev
mkdir -p /d01/oracle/oc4j
cd /d01/oracle/oc4j
cp -r /mnt/oraclebackup/deathstar_patches/SES/oc4j/* .
ADF install
vi /mnt/oraclebackup/deathstar_patches/SES/adf/adfinstaller.properties
change the following
OracleHome = /mnt/oraclebackup/deathstar_patches/SES/adf
DesHome = /d01/oracle/oc4j/
type = OC4J
as root
cd /usr/bin
rm java
(yes)
ln -s /usr/local/jdk1.5.0_22/bin/java
su - oracle
java -version     should now return 1.5.0_22
export JAVA_HOME=/usr/local/jdk1.5.0_22
cd /mnt/oraclebackup/deathstar_patches/SES/adf
java -jar runinstaller.jar -version
returns The version for the ADF libraries being installed is 10.1.3.41.57 - yes, that is apparently 10.1.3.3.
java -jar runinstaller.jar adfinstaller.properties
output looks good, do not be concerned by
WARNING: 'Could not delete: /d01/oracle/oc4j/BC4J/redist/bc4j' whilst deleting bc4j application
WARNING: 'Could not delete: /d01/oracle/oc4j/BC4J/redist/datatags' whilst deleting datatags application
as it was trying to delete the old version that didn't exist
Start OC4J
as oracle on aussearchdev
export JAVA_HOME=/usr/local/jdk1.5.0_22
export ORACLE_HOME=/d01/oracle/oc4j
cd $ORACLE_HOME/bin
./oc4j -start
you will be prompted for password - we're setting it. use XXXXXXXXXX
after it's up, kill it (ctrl-c) and restart it with
nohup ./oc4j -start &
last lines in nohup.out is
Starting OC4J from /d01/oracle/oc4j/j2ee/home ...
10/02/23 03:22:38 Oracle Containers for J2EE 10g (10.1.3.3.0) initialized
So now on to search modeler installation, going by Installation steps in Note 781366.1
8326128 - This is not a patch to be applied to the Apps, keep reading
as oracle on aussearchdev
cd /mnt/oraclebackup/deathstar_patches/SES/8326128
mkdir -p /d01/oracle/oc4j/uploaded
vi build.properties, changing
installation.type=OC4J
oracle.home=/d01/oracle/oc4j
deploy.server=aussearchdev.domainname.com
deploy.port=23791
web.port=7777
password=XXXXXXXXX
extra.classpath=/d01/oracle/oc4j/uploaded
now set the following environment values in your ssh session
export ORACLE_HOME=/d01/oracle/oc4j
export JAVA_HOME=/usr/local/jdk1.5.0_22
export PATH=$ORACLE_HOME/ant/bin:$ORACLE_HOME/bin:$PATH
ant main
whole bunch of stuff to screen, errors due to undeploy something that doesn't exist. Finished after a minute with
BUILD SUCCESSFUL
Total time: 58 seconds
Now on to post install steps
restart OC4j
cd $ORACLE_HOME/bin
./modeler.sh -shutdown -port 23791 -password r*l*r*0*
export ORACLE_HOME=/d01/oracle/oc4j
export JAVA_HOME=/usr/local/jdk1.5.0_22
export PATH=$ORACLE_HOME/ant/bin:$ORACLE_HOME/bin:$PATH
nohup ./modeler.sh -start &
end of nohup.out should show
Starting OC4J from /d01/oracle/oc4j/j2ee/home ...
Try going to http://aussearchdev:8888/modeler/faces/ModelerHome.jsp
Should get login screen, but wait, we haven't installed Oracle Apps interface yet...
Next let's do the Apps side of things
Going by note 953378.1
Using ERNIE (a development instance of E-Business Suite running 11.5.10.2 ATG RUP 7)
as applmgr on ausernieapp (ausernieapp is our app tier)
shut down apps services
apps patch 8225631
verify all the pre-req patches are in ERNIE
select * from ad_bugs where bug_number = '5903765';
select * from ad_bugs where bug_number = '6372396';
select * from ad_bugs where bug_number = '3219567';
select * from ad_bugs where bug_number = '3264822';
select * from ad_bugs where bug_number = '3261254';
select * from ad_bugs where bug_number = '5161676';
select * from ad_bugs where bug_number = '3036401';
select * from ad_bugs where bug_number = '3263588';
select * from ad_bugs where bug_number = '3264818';
select * from ad_bugs where bug_number = '3218526';
select * from ad_bugs where bug_number = '3263645';
select * from ad_bugs where bug_number = '4206794';
select * from ad_bugs where bug_number = '3262486';
select * from ad_bugs where bug_number = '3261243';
select * from ad_bugs where bug_number = '2614213';
select * from ad_bugs where bug_number = '3262159';
select * from ad_bugs where bug_number = '2819091';
select * from ad_bugs where bug_number = '3412795';
patch went in smooth
Log in to ERNIE Apps GUI as sysadmin user responsibility
Give users such as sysadmin FND Search Crawler responsibility
Go to system profile options, set
set FND: Search Enabling Flag to Y at site level
as applmgr on ausernieapp
cd /d01/oracle/ernieappl/fnd/11.5.0/patch/115/sql
sqlplus apps/$APPS_PWD @AFSRCHCF
Enter SES endpoint URL [e.g. http://ap637atg.us.oracle.com:7780]: http://aussearchdev.domainname.com:7777
Enter Apps Admin username [e.g. sysadmin]: sysadmin
Enter Apps Admin password: sysadmin_password
Enter SES Admin username [e.g. eqsys]: eqsys
Enter SES Admin password: eqsyspassword <-- This is the same as sys's password
on aussearchdev as oracle
had to kill modeler and start all the processes, so
kill -9 the modeler oc4j process, then
cd $ORACLE_HOME/bin
./searchctl startall
enter the password when prompted
in IE browser go to
http://aussearchdev.domainname.com:7777/search/admin
log in with eqsys password
global settings tab
identity management setup
click circle next to oracle.search.plugin.security.identity.ebs.EBS12IdentityPliginMgr
(yes, we're going with 12 even though we use Oracle Apps 11i)
http end point https://ausernieapp.domainname.com:8443/webservices/AppSearch/SecurityService
username sysadmin
password XXXXXXX
finish
Global Settings
Federation Trusted Entitites
####entity name sysadmin
####Entity Password XXXXXXXX
According to web conference with Oracle, this should NOT be eqsys but instead be sysadmin from above.
Select the Use Entity Plug-in for authentication check box
add
Trying to go to http://aussearchdev.domainname.com:7777/search/query/search and login (sysadmin / password)
stop midtier on both SES and Apps
cd $ORACLE_HOME/bin
./searchctl stopall
./adstpall.sh apps/$APPS_PWD on EBS app tier
start midtier on both SES and Apps
cd $ORACLE_HOME/bin
./searchctl startall
./adstrtal.sh apps/$APPS_PWD on EBS app tier
Now try and log in to Oracle SES user interface to verify the configuration
http://aussearchdev.domainname.com:7777/search/query
Now start up modeler again
export JAVA_HOME=/usr/local/jdk1.5.0_22
export ORACLE_HOME=/d01/oracle/oc4j
export PATH=$ORACLE_HOME/bin:$PATH
cd $ORACLE_HOME/bin
nohup ./modeler.sh -start &
Works now.
Now go to http://aussearchdev.domainname.com:8888/modeleradmin/AdminHome.jsp log in as oc4jadmin/XXXXXXX
Configure new target
Target Type 11i
Description ERNIE
Name ERNIE
EBS Database Host Name auserniedb
EBS Database Port 1521
EBS Database SID ERNIE
username apps
password XXXXXXXXx
oc4jadmin XXXXXXXx
export JAVA_HOME=/usr/local/jdk1.5.0_22
export ORACLE_HOME=/d01/oracle/oc4j
export PATH=$ORACLE_HOME/bin:$PATH
cd $ORACLE_HOME/j2ee/home
java -jar admin_client.jar deployer:oc4j:aussearchdev oc4jadmin XXXXXXXXX -addDataSourceConnectionPool -name "ERNIE2-pool" -factoryClass "oracle.jdbc.pool.OracleDataSource" -dbUser "apps" -dbPassword "XXXXXXX" -url "jdbc:oracle:thin:@auserniedb.domainname.com:1521:ERNIE" -applicationName appsearch
java -jar admin_client.jar deployer:oc4j:aussearchdev oc4jadmin XXXXXXX -addManagedDataSource -name "ERNIEDS" -jndiLocation "jdbc/ERNIEDS" -connectionPoolName "ERNIE2-pool" -applicationName appsearch
http://aussearchdev.domainname.com:8888/modeler/faces/ModelerHome.jsp
So, creating a self signed SSL certificate for ERNIE EBS instance (this will not work if you use an SSL certificate for another server like say, PROD)
doing this on ausernieapp
openssl genrsa -des3 -out ausernieapp.key 1024
PEM key is ausernieapp
openssl req -new -key ausernieapp.key -out ausernieapp.csr
PEM key is ausernieapp
Country US
State Texas
Locality Austin
Organization Name Corporation
Organizational Unit Name Information Technology
Common Name ausernieapp.domainname.com
Email address [email protected]
No challenge password
No optional company name
Now let's remove the passphrase from the key
cp ausernieapp.key ausernieapp.key.orig
openssl rsa -in ausernieapp.key.orig -out ausernieapp.key
Now let's generate a self-signed certificate
openssl x509 -req -days 1000 -in ausernieapp.csr -signkey ausernieapp.key -out ausernieapp.crt
Install the private key and certificate
cd $IAS_ORACLE_HOME/Apache/Apache/conf/ssl.crt
cp server.crt server.crt.backup.03102010
chown applmgr:applmgr server.crt.backup.03102010
cp $HOME/ausernieapp.crt /d01/oracle/ernieora/new/iAS/Apache/Apache/conf/ssl.crt/server.crt
cd $IAS_ORACLE_HOME/Apache/Apache/conf/ssl.key/
cp server.key server.key.backup.03102010
cp $HOME/ausernieapp.key /d01/oracle/ernieora/new/iAS/Apache/Apache/conf/ssl.key/server.key
chown applmgr:applmgr server.key.backup.03102010
bounce apache as applmgr
cd /d01/oracle/erniecomn/admin/scripts/ERNIE_ausernieapp
./adapcctl.sh stop
./adapcctl.sh start
In IE
https://ausernieapp.domainname.com:8443
Continue
Click on Certificate Error next to URL bar
Install Certificate -> Next-> Place all certificates in the following store -> trusted root certificate authorities ->finish
close browser, back to https://ausernieapp.domainname.com:8443
no errors,
Next step will be to import key into the SES and Search modelers
as oracle on aussearchdev
cd /d01/oracle/10.1.8/sesdev/jdk/jre/lib/security/
cp cacerts cacerts.backup.03102010
scp root@ausernieapp:/root/ausernieapp.crt .
export LANG=c
export PATH=$ORACLE_HOME/jdk/bin:$PATH
keytool -keystore ./cacerts -storepass changeit -alias rootausernieapp -import -trustcacerts -file ausernieapp.crt
--output
Owner: [email protected], CN=ausernieapp.domainname.com, OU=Information Technology, O=Corporation, L=Austin, ST=Texas, C=US
Issuer: [email protected], CN=ausernieapp.domainname.com, OU=Information Technology, O=Corporation, L=Austin, ST=Texas, C=US
Serial number: b4e92089cf73076f
Valid from: Wed Mar 10 13:22:38 CST 2010 until: Tue Dec 04 13:22:38 CST 2012
Certificate fingerprints:
MD5: 2C:6B:EE:1A:63:6D:XX:A6:05:90:F6:XX:DD:88:F7:80
SHA1: F8:DC:E5:2A:3E:68:XX:E1:EA:E4:75:AE:CC:4F:4A:10:2F:8A:FE:9B
Trust this certificate? [no]: yes
Certificate was added to keystore
Now load our cert
keytool -keystore ./cacerts -import -trustcacerts -file ausernieapp.crt
keytool -list -v -keystore ./cacerts now shows
Alias name: rootausernieapp
Creation date: Mar 10, 2010
Entry type: trustedCertEntry
Owner: [email protected], CN=ausernieapp.domainname.com, OU=Information Technology, O=Corporation, L=Austin, ST=Texas, C=US
Issuer: [email protected], CN=ausernieapp.domainname.com, OU=Information Technology, O=Corporation, L=Austin, ST=Texas, C=US
Serial number: b4e92089cf73076f
Valid from: Wed Mar 10 13:22:38 CST 2010 until: Tue Dec 04 13:22:38 CST 2012
Certificate fingerprints:
MD5: 2C:6B:EE:1A:63:6D:CB:XX:05:90:F6:78:DD:88:F7:80
SHA1: F8:DC:E5:2A:3E:68:9C:CE:EA:4E:75:AE:CC:FA:9E:10:2F:8A:FE:9B
Now we need to load it into the search modeler keystore
as root on aussearchdev
export JAVA_HOME=/usr/local/jdk1.5.0_22/
export PATH=$JAVA_HOME/bin:$PATH
cd /usr/local/jdk1.5.0_22/jre/lib/security/
scp root@ausernieapp:/root/ausernieapp.crt .
output
keytool -keystore ./cacerts -import -trustcacerts -file ausernieapp.crt
Enter keystore password: changeit
Owner: [email protected], CN=ausernieapp.domainname.com, OU=Information Technology, O=Corporation, L=Austin, ST=Texas, C=US
Issuer: [email protected], CN=ausernieapp.domainname.com, OU=Information Technology, O=Corporation, L=Austin, ST=Texas, C=US
Serial number: b4e92089cf73076f
Valid from: Wed Mar 10 13:22:38 CST 2010 until: Tue Dec 04 13:22:38 CST 2012
Certificate fingerprints:
MD5: 2C:6B:EE:1A:63:6D:CB:A1:05:90:F6:78:DD:88:F7:80
SHA1: F8:DC:E5:2A:3E:68:9C:CE:EA:4E:75:AE:CC:4F:9E:10:2F:8A:FE:9B
Trust this certificate? [no]: yes
Certificate was added to keystore
[root@aussearchdev security]#
output
For troubleshooting, if you go to end of /d01/oracle/10.1.8/sesdev/search/data/config/crawler.dat
you can modify the logLevel from the default of 4 to 2 to get better debug data. No services need to be restarted, it will become active with the next crawl.
While talking with Oracle, they mentioned the following patches
The patches identified 8321527 and 7586924 are SES patches to help with indexing
They also identified patch 9103851 which is an apps patch dealing with responsibilities <-- This is not yet available
Applying patch 7586924
as oracle on aussearchdev
cd $ORACLE_HOME/bin
./searchctl stopall
cd /mnt/oraclebackup/deathstar_patches/SES/post_patches/7586924
opatch apply
cd $ORACLE_HOME/bin
./searchctl startall
sqlplus eqsys/XXXXXX@SESDEV
define SCH_NAME=EQSYS
define PROXY_USER=EQPROXY
define INST_USER=EQ_TEST
@$ORACLE_HOME/search/admin/eq0pkh.sql
@$ORACLE_HOME/search/admin/eq0plb.sql
@$ORACLE_HOME/search/admin/eq0bug_7586924.sql
cd $ORACLE_HOME/search/data/config/
cp crawler.dat crawler.dat.backup.03102010
vi crawler.dat
We're using the Oracle E-Business Suite R12 crawler, so we will add the line
USE_IN_MEMORY_QUEUE Oracle E-Business Suite R12
as the line immediately preceding IMPORT -
so the end of the file looks like this:
# system properies: separated by space for multiple system properties or define multiple SYSTEM_PROPERTIES
# logLevel values: DEBUG(2), INFO(4), WARN(6), ERROR(8), FATAL(10)
SYSTEM_PROPERTIES -Doracle.search.logLevel=4 -Doracle.search.log=oracle.search.util.Log4jImpl
USE_IN_MEMORY_QUEUE Oracle E-Business Suite R12
IMPORT -
Now on to patch 8321527
cd /mnt/oraclebackup/deathstar_patches/SES/post_patches/8321527
cd $ORACLE_HOME/bin
./searchctl stopall
cd -
opatch apply
cd $ORACLE_HOME/bin
./searchctl startall
sqlplus eqsys/XXXXXXX@SESDEV
define SCH_NAME=EQSYS
define PROXY_USER=EQPROXY
select object_name from user_objects where status = 'INVALID';
--should be no rows selected
@$ORACLE_HOME/search/admin/eq0pkh.sql
@$ORACLE_HOME/search/admin/eq0plb.sql
--should be no rows selected
restart SES
cd -
./searchctl stopall
./searchctl startall

Below are all the steps I took for creating integrating Search Modeler with an Oracle E-Business Suite 11.5.10.2 ATG RUP 7 instance called ERNIE.
Much thanks to Oracle Support ( Rajesh Ghosh, Vikas Soolapani and Roger Ford), as this simply wouldn't have been possible without them.
There are a few things in this document that may not be pertinent to your environment if you're doing this. I've made attempts to clarify those possibly optional sections in the documentation.
I've broken the document down into the following multiple parts
o Setting up a new RedHat 4.8 x86 server called ausSEARCHdev (The server is in AUStin, TX, is dedicated to SEARCH, and is for our DEV environment)
o SES (Secure Enterprise Search 10.1.8.2 install
o SES 10.1.8.4 patchset install
o SES CPU patch apply
o Standalone OC4J and ADF installation
o Search Modeler installation and configuration
o Configure ERNIE Apps instance to be on valid self-signed SSL certificate
o Import ERNIE SSL certificate into SES and Search Modeler
using aussearchdev initially
rh4 x86, default oracle build
** htop and collectl are open source free performance monitoring packages we utilize**
--start
install htop and collectl
wget http://dag.wieers.com/rpm/packages/htop/htop-0.7-1.el4.rf.i386.rpm
rpm -ivh htop-0.7-1.el4.rf.i386.rpm
wget http://downloads.sourceforge.net/project/collectl/collectl/collectl-3.4.0-4/collectl-3.4.0-4.noarch.rpm?use_mirror=voxel
rpm -ivh collectl-3.4.0-4.noarch.rpm
chkconfig collectl on
service collectl start
**We still need to install the necessary rpms so that collectl logs are compressed
--end
useradd -u 501 oracle
groupadd -g 504 dba
usermod -G 504 oracle
verification:
     [root@aussearchdev ~]# su - oracle
     [oracle@aussearchdev ~]$ id
     uid=501(oracle) gid=501(oracle) groups=501(oracle),504(dba)
passwd oracle
** /mnt/oraclebackup is a network dumpspot we use to hold Software installs, RPMs, etc
** /mnt/rpms is a network dumpspot we use to hold ISOs for OS software such as Redhat Linux
mkdir /mnt/oraclebackup
mkdir /mnt/rpms
add the following to /etc/fstab
XXXXXXX:/patches/oraclebackup /mnt/oraclebackup nfs defaults,hard,nolock 0 0
XXXXXXX:/esxpress/nfs /mnt/rpms nfs rw,addr=XXX.XXX.XXX.XXX 0 0
mount /mnt/rpms
Next need to install various oracle needed RPMs.
cd /mnt/rpms/rh40_upd8/RedHat/RPMS/
rpm -ivh perl-Compress-Zlib-1.42-1.el4.i386.rpm
rpm -ivh libaio-devel-0.3.105-2.i386.rpm
rpm -ivh sysstat-5.0.5-25.el4.i386.rpm
rpm -ivh unixODBC-devel-2.2.11-1.RHEL4.1.i386.rpm
service collectl restart
cd /tmp
wget http://oss.oracle.com/el4/oracle-validated/oracle-validated-1.0.0-18.el4.i386.rpm
rpm -ivh oracle-validated-1.0.0-18.el4.i386.rpm
Now we should have all the RPMs we need.
cd /etc/sysconfig/oracle-validated
./oracle-validated-verify
cd /var/log/oracle-validated/results
more orakernel.log
uname -a
should return 2.6.9 or higher
rpm -qa|grep gcc-
should return 3.4.3 or higher
rpm -qa|grep glibc
should return 2.3.4-2.9 or higher
rpm -qa|grep make
should return 3.80 or higher
rpm -qa|grep binutils
should return 2.15.92.0.2 or higher
rpm -qa|grep openmotif
should return 2.2.3-9.RHEL4.1 or higher
rpm -qa|grep compat-db
should return 4.1.25-9 or higher
rpm -qa|grep setarch
should return 1.6-1 or higher
cat /proc/sys/kernel/sem
should return 250 32000 100 128 or higher (250 32000 100 142 in our case)
cat /proc/sys/kernel/shmall (1073741824 in our case)
should return 2097152 or higher
cat /proc/sys/kernel/shmmax
should return half the size of physical memory (4294967295 in our case - NO LARGER on 32-bit OS)
cat /proc/sys/kernel/shmmni
should return 4096
cat /proc/sys/fs/file-max
should return 65536 (327679 in our case)
cat /proc/sys/net/ipv4/ip_local_port_range
should return 1024 65000
values in /etc/security/limits.conf set by oracle-validated rpm, no changes necessary
add the following line to /etc/pam.d/login
session required /lib/security/pam_limits.so
add the following to /etc/profile
if [ $USER = "oracle" ]; then
if [ $SHELL = "/bin/ksh" ]; then
ulimit -p 16384
ulimit -n 65536
else
ulimit -u 16384 -n 65536
fi
fi
mkdir -p /d01/oracle
chmod 777 /d01/oracle
init 6 the box (aka reboot)
Time to start the SES 10.1.8.2 installer
running SES 10.1.8.2 installer
as oracle
cd /mnt/oraclebackup/deathstar_patches/SES/SES10182
./runInstaller
search server name sesprod
administrative password XXXXXXXX for dev,
http port 7777
destination path /d01/oracle/10.1.8/sesdev (dev)
data storage path /d01/oracle/sesdevdata (dev)
next
inventory /d01/oracle/oraInventory
dba group
run orainstroot.sh as requested
continue
all tests should pass, continue
finished clean
tried logging in to admin console at http://aussearchdev:7777/search/admin - worked fine
tried bringing up search query at http://aussearchdev:7777/search/query/search - worked fine
Now we need to get to 10.1.8.4 of SES
(yes, you need to keep the system up)
cd /mnt/oraclebackup/deathstar_patches/SES/SES10184/ses_10184pst_linux/
./runInstaller
Destination, choose sesdev
Next
Patchset successful
tried logging in to admin console at http://aussearchdev:7777/search/admin - worked fine
tried bringing up search query at http://aussearchdev:7777/search/query/search - worked fine
Apply CPU Patch to SES
CPU JAN 10 says patch 9119261 is required - but patch requires extended support contract
CPU OCT 09 says patch 8836540 is required - but patch requires extended support contract
CPU JUL 09 says patch 8534394 is required - but patch requires extended support contract
CPU APR 09 says patch 8290534 is required - and you can actually download it
Need opatch from 6880880
cp -r /mnt/oraclebackup/deathstar_patches/SES/CPUAPR09/OPatch $ORACLE_HOME
export PATH=$ORACLE_HOME/OPatch:$PATH
shut down everything
cd $ORACLE_HOME/bin
./searchctl stopall
cd /mnt/oraclebackup/deathstar_patches/SES/CPUAPR09/8290534
opatch apply
cd $ORACLE_HOME/cpu/CPUApr2009
**Note: your sys password is what you set for your administrative password above
sqlplus "sys/XXXXXX" as sysdba;
startup
@catcpu
@?/rdbms/admin/utlrp
shutdown immediate
exit
cd /d01/oracle/10.1.8/sesdev/cpu/view_recompile/
sqlplus "sys/XXXXXXX" as sysdba;
startup upgrade;
@view_recompile_jan2008cpu.sql
@?/rdbms/admin/utlrp
shutdown immediate
cd /d01/oracle/10.1.8/sesdev/jdk/jre/lib/ext
mv mail.jar $HOME/mail.jar.backup02222010
mv mailapi.jar $HOME/mailapi.jar.back02222010
cp /d01/oracle/10.1.8/sesdev/search/lib/mail.jar .
SES 10.1.8.4 is now installed and updated with latest available CPU
tried logging in to admin console at http://aussearchdev:7777/search/admin - worked fine
tried bringing up search query at http://aussearchdev:7777/search/query/search - worked fine
we're going to go with the standalone OC4j 10.1.3.3 and Oracle ADF 10.1.3.3 method
The URLs for these products are
http://blogs.oracle.com/ebssearch/2009/10/available_now_oracle_search_modeler_11_for_oracle_e-business_suite_11i.html
and specifically
OC4J - http://download.oracle.com/otn/java/oc4j/101330/oc4j_extended_101330.zip
ADF - http://www.oracle.com/technology/software/products/jdev/htdocs/adfinstaller10133.html
OC4J install
First you need to have Java 1.5 on the machine. Latest is 1.5.0_22. Package is in /mnt/oraclebackup/deathstar_patches/SES
as root on aussearchdev
cd /usr/local
cp /mnt/oraclebackup/deathstar_patches/SES/jdk-1_5_0_22-linux-i586.bin .
chmod 700 jdk-1_5_0_22-linux-i586.bin
./jdk-1_5_0_22-linux-i586.bin
yes
install OC4J just by copying over the directory
as oracle on aussearchdev
mkdir -p /d01/oracle/oc4j
cd /d01/oracle/oc4j
cp -r /mnt/oraclebackup/deathstar_patches/SES/oc4j/* .
ADF install
vi /mnt/oraclebackup/deathstar_patches/SES/adf/adfinstaller.properties
change the following
OracleHome = /mnt/oraclebackup/deathstar_patches/SES/adf
DesHome = /d01/oracle/oc4j/
type = OC4J
as root
cd /usr/bin
rm java
(yes)
ln -s /usr/local/jdk1.5.0_22/bin/java
su - oracle
java -version     should now return 1.5.0_22
export JAVA_HOME=/usr/local/jdk1.5.0_22
cd /mnt/oraclebackup/deathstar_patches/SES/adf
java -jar runinstaller.jar -version
returns The version for the ADF libraries being installed is 10.1.3.41.57 - yes, that is apparently 10.1.3.3.
java -jar runinstaller.jar adfinstaller.properties
output looks good, do not be concerned by
WARNING: 'Could not delete: /d01/oracle/oc4j/BC4J/redist/bc4j' whilst deleting bc4j application
WARNING: 'Could not delete: /d01/oracle/oc4j/BC4J/redist/datatags' whilst deleting datatags application
as it was trying to delete the old version that didn't exist
Start OC4J
as oracle on aussearchdev
export JAVA_HOME=/usr/local/jdk1.5.0_22
export ORACLE_HOME=/d01/oracle/oc4j
cd $ORACLE_HOME/bin
./oc4j -start
you will be prompted for password - we're setting it. use XXXXXXXXXX
after it's up, kill it (ctrl-c) and restart it with
nohup ./oc4j -start &
last lines in nohup.out is
Starting OC4J from /d01/oracle/oc4j/j2ee/home ...
10/02/23 03:22:38 Oracle Containers for J2EE 10g (10.1.3.3.0) initialized
So now on to search modeler installation, going by Installation steps in Note 781366.1
8326128 - This is not a patch to be applied to the Apps, keep reading
as oracle on aussearchdev
cd /mnt/oraclebackup/deathstar_patches/SES/8326128
mkdir -p /d01/oracle/oc4j/uploaded
vi build.properties, changing
installation.type=OC4J
oracle.home=/d01/oracle/oc4j
deploy.server=aussearchdev.domainname.com
deploy.port=23791
web.port=7777
password=XXXXXXXXX
extra.classpath=/d01/oracle/oc4j/uploaded
now set the following environment values in your ssh session
export ORACLE_HOME=/d01/oracle/oc4j
export JAVA_HOME=/usr/local/jdk1.5.0_22
export PATH=$ORACLE_HOME/ant/bin:$ORACLE_HOME/bin:$PATH
ant main
whole bunch of stuff to screen, errors due to undeploy something that doesn't exist. Finished after a minute with
BUILD SUCCESSFUL
Total time: 58 seconds
Now on to post install steps
restart OC4j
cd $ORACLE_HOME/bin
./modeler.sh -shutdown -port 23791 -password r*l*r*0*
export ORACLE_HOME=/d01/oracle/oc4j
export JAVA_HOME=/usr/local/jdk1.5.0_22
export PATH=$ORACLE_HOME/ant/bin:$ORACLE_HOME/bin:$PATH
nohup ./modeler.sh -start &
end of nohup.out should show
Starting OC4J from /d01/oracle/oc4j/j2ee/home ...
Try going to http://aussearchdev:8888/modeler/faces/ModelerHome.jsp
Should get login screen, but wait, we haven't installed Oracle Apps interface yet...
Next let's do the Apps side of things
Going by note 953378.1
Using ERNIE (a development instance of E-Business Suite running 11.5.10.2 ATG RUP 7)
as applmgr on ausernieapp (ausernieapp is our app tier)
shut down apps services
apps patch 8225631
verify all the pre-req patches are in ERNIE
select * from ad_bugs where bug_number = '5903765';
select * from ad_bugs where bug_number = '6372396';
select * from ad_bugs where bug_number = '3219567';
select * from ad_bugs where bug_number = '3264822';
select * from ad_bugs where bug_number = '3261254';
select * from ad_bugs where bug_number = '5161676';
select * from ad_bugs where bug_number = '3036401';
select * from ad_bugs where bug_number = '3263588';
select * from ad_bugs where bug_number = '3264818';
select * from ad_bugs where bug_number = '3218526';
select * from ad_bugs where bug_number = '3263645';
select * from ad_bugs where bug_number = '4206794';
select * from ad_bugs where bug_number = '3262486';
select * from ad_bugs where bug_number = '3261243';
select * from ad_bugs where bug_number = '2614213';
select * from ad_bugs where bug_number = '3262159';
select * from ad_bugs where bug_number = '2819091';
select * from ad_bugs where bug_number = '3412795';
patch went in smooth
Log in to ERNIE Apps GUI as sysadmin user responsibility
Give users such as sysadmin FND Search Crawler responsibility
Go to system profile options, set
set FND: Search Enabling Flag to Y at site level
as applmgr on ausernieapp
cd /d01/oracle/ernieappl/fnd/11.5.0/patch/115/sql
sqlplus apps/$APPS_PWD @AFSRCHCF
Enter SES endpoint URL [e.g. http://ap637atg.us.oracle.com:7780]: http://aussearchdev.domainname.com:7777
Enter Apps Admin username [e.g. sysadmin]: sysadmin
Enter Apps Admin password: sysadmin_password
Enter SES Admin username [e.g. eqsys]: eqsys
Enter SES Admin password: eqsyspassword <-- This is the same as sys's password
on aussearchdev as oracle
had to kill modeler and start all the processes, so
kill -9 the modeler oc4j process, then
cd $ORACLE_HOME/bin
./searchctl startall
enter the password when prompted
in IE browser go to
http://aussearchdev.domainname.com:7777/search/admin
log in with eqsys password
global settings tab
identity management setup
click circle next to oracle.search.plugin.security.identity.ebs.EBS12IdentityPliginMgr
(yes, we're going with 12 even though we use Oracle Apps 11i)
http end point https://ausernieapp.domainname.com:8443/webservices/AppSearch/SecurityService
username sysadmin
password XXXXXXX
finish
Global Settings
Federation Trusted Entitites
####entity name sysadmin
####Entity Password XXXXXXXX
According to web conference with Oracle, this should NOT be eqsys but instead be sysadmin from above.
Select the Use Entity Plug-in for authentication check box
add
Trying to go to http://aussearchdev.domainname.com:7777/search/query/search and login (sysadmin / password)
stop midtier on both SES and Apps
cd $ORACLE_HOME/bin
./searchctl stopall
./adstpall.sh apps/$APPS_PWD on EBS app tier
start midtier on both SES and Apps
cd $ORACLE_HOME/bin
./searchctl startall
./adstrtal.sh apps/$APPS_PWD on EBS app tier
Now try and log in to Oracle SES user interface to verify the configuration
http://aussearchdev.domainname.com:7777/search/query
Now start up modeler again
export JAVA_HOME=/usr/local/jdk1.5.0_22
export ORACLE_HOME=/d01/oracle/oc4j
export PATH=$ORACLE_HOME/bin:$PATH
cd $ORACLE_HOME/bin
nohup ./modeler.sh -start &
Works now.
Now go to http://aussearchdev.domainname.com:8888/modeleradmin/AdminHome.jsp log in as oc4jadmin/XXXXXXX
Configure new target
Target Type 11i
Description ERNIE
Name ERNIE
EBS Database Host Name auserniedb
EBS Database Port 1521
EBS Database SID ERNIE
username apps
password XXXXXXXXx
oc4jadmin XXXXXXXx
export JAVA_HOME=/usr/local/jdk1.5.0_22
export ORACLE_HOME=/d01/oracle/oc4j
export PATH=$ORACLE_HOME/bin:$PATH
cd $ORACLE_HOME/j2ee/home
java -jar admin_client.jar deployer:oc4j:aussearchdev oc4jadmin XXXXXXXXX -addDataSourceConnectionPool -name "ERNIE2-pool" -factoryClass "oracle.jdbc.pool.OracleDataSource" -dbUser "apps" -dbPassword "XXXXXXX" -url "jdbc:oracle:thin:@auserniedb.domainname.com:1521:ERNIE" -applicationName appsearch
java -jar admin_client.jar deployer:oc4j:aussearchdev oc4jadmin XXXXXXX -addManagedDataSource -name "ERNIEDS" -jndiLocation "jdbc/ERNIEDS" -connectionPoolName "ERNIE2-pool" -applicationName appsearch
http://aussearchdev.domainname.com:8888/modeler/faces/ModelerHome.jsp
So, creating a self signed SSL certificate for ERNIE EBS instance (this will not work if you use an SSL certificate for another server like say, PROD)
doing this on ausernieapp
openssl genrsa -des3 -out ausernieapp.key 1024
PEM key is ausernieapp
openssl req -new -key ausernieapp.key -out ausernieapp.csr
PEM key is ausernieapp
Country US
State Texas
Locality Austin
Organization Name Corporation
Organizational Unit Name Information Technology
Common Name ausernieapp.domainname.com
Email address [email protected]
No challenge password
No optional company name
Now let's remove the passphrase from the key
cp ausernieapp.key ausernieapp.key.orig
openssl rsa -in ausernieapp.key.orig -out ausernieapp.key
Now let's generate a self-signed certificate
openssl x509 -req -days 1000 -in ausernieapp.csr -signkey ausernieapp.key -out ausernieapp.crt
Install the private key and certificate
cd $IAS_ORACLE_HOME/Apache/Apache/conf/ssl.crt
cp server.crt server.crt.backup.03102010
chown applmgr:applmgr server.crt.backup.03102010
cp $HOME/ausernieapp.crt /d01/oracle/ernieora/new/iAS/Apache/Apache/conf/ssl.crt/server.crt
cd $IAS_ORACLE_HOME/Apache/Apache/conf/ssl.key/
cp server.key server.key.backup.03102010
cp $HOME/ausernieapp.key /d01/oracle/ernieora/new/iAS/Apache/Apache/conf/ssl.key/server.key
chown applmgr:applmgr server.key.backup.03102010
bounce apache as applmgr
cd /d01/oracle/erniecomn/admin/scripts/ERNIE_ausernieapp
./adapcctl.sh stop
./adapcctl.sh start
In IE
https://ausernieapp.domainname.com:8443
Continue
Click on Certificate Error next to URL bar
Install Certificate -> Next-> Place all certificates in the following store -> trusted root certificate authorities ->finish
close browser, back to https://ausernieapp.domainname.com:8443
no errors,
Next step will be to import key into the SES and Search modelers
as oracle on aussearchdev
cd /d01/oracle/10.1.8/sesdev/jdk/jre/lib/security/
cp cacerts cacerts.backup.03102010
scp root@ausernieapp:/root/ausernieapp.crt .
export LANG=c
export PATH=$ORACLE_HOME/jdk/bin:$PATH
keytool -keystore ./cacerts -storepass changeit -alias rootausernieapp -import -trustcacerts -file ausernieapp.crt
--output
Owner: [email protected], CN=ausernieapp.domainname.com, OU=Information Technology, O=Corporation, L=Austin, ST=Texas, C=US
Issuer: [email protected], CN=ausernieapp.domainname.com, OU=Information Technology, O=Corporation, L=Austin, ST=Texas, C=US
Serial number: b4e92089cf73076f
Valid from: Wed Mar 10 13:22:38 CST 2010 until: Tue Dec 04 13:22:38 CST 2012
Certificate fingerprints:
MD5: 2C:6B:EE:1A:63:6D:XX:A6:05:90:F6:XX:DD:88:F7:80
SHA1: F8:DC:E5:2A:3E:68:XX:E1:EA:E4:75:AE:CC:4F:4A:10:2F:8A:FE:9B
Trust this certificate? [no]: yes
Certificate was added to keystore
Now load our cert
keytool -keystore ./cacerts -import -trustcacerts -file ausernieapp.crt
keytool -list -v -keystore ./cacerts now shows
Alias name: rootausernieapp
Creation date: Mar 10, 2010
Entry type: trustedCertEntry
Owner: [email protected], CN=ausernieapp.domainname.com, OU=Information Technology, O=Corporation, L=Austin, ST=Texas, C=US
Issuer: [email protected], CN=ausernieapp.domainname.com, OU=Information Technology, O=Corporation, L=Austin, ST=Texas, C=US
Serial number: b4e92089cf73076f
Valid from: Wed Mar 10 13:22:38 CST 2010 until: Tue Dec 04 13:22:38 CST 2012
Certificate fingerprints:
MD5: 2C:6B:EE:1A:63:6D:CB:XX:05:90:F6:78:DD:88:F7:80
SHA1: F8:DC:E5:2A:3E:68:9C:CE:EA:4E:75:AE:CC:FA:9E:10:2F:8A:FE:9B
Now we need to load it into the search modeler keystore
as root on aussearchdev
export JAVA_HOME=/usr/local/jdk1.5.0_22/
export PATH=$JAVA_HOME/bin:$PATH
cd /usr/local/jdk1.5.0_22/jre/lib/security/
scp root@ausernieapp:/root/ausernieapp.crt .
output
keytool -keystore ./cacerts -import -trustcacerts -file ausernieapp.crt
Enter keystore password: changeit
Owner: [email protected], CN=ausernieapp.domainname.com, OU=Information Technology, O=Corporation, L=Austin, ST=Texas, C=US
Issuer: [email protected], CN=ausernieapp.domainname.com, OU=Information Technology, O=Corporation, L=Austin, ST=Texas, C=US
Serial number: b4e92089cf73076f
Valid from: Wed Mar 10 13:22:38 CST 2010 until: Tue Dec 04 13:22:38 CST 2012
Certificate fingerprints:
MD5: 2C:6B:EE:1A:63:6D:CB:A1:05:90:F6:78:DD:88:F7:80
SHA1: F8:DC:E5:2A:3E:68:9C:CE:EA:4E:75:AE:CC:4F:9E:10:2F:8A:FE:9B
Trust this certificate? [no]: yes
Certificate was added to keystore
[root@aussearchdev security]#
output
For troubleshooting, if you go to end of /d01/oracle/10.1.8/sesdev/search/data/config/crawler.dat
you can modify the logLevel from the default of 4 to 2 to get better debug data. No services need to be restarted, it will become active with the next crawl.
While talking with Oracle, they mentioned the following patches
The patches identified 8321527 and 7586924 are SES patches to help with indexing
They also identified patch 9103851 which is an apps patch dealing with responsibilities <-- This is not yet available
Applying patch 7586924
as oracle on aussearchdev
cd $ORACLE_HOME/bin
./searchctl stopall
cd /mnt/oraclebackup/deathstar_patches/SES/post_patches/7586924
opatch apply
cd $ORACLE_HOME/bin
./searchctl startall
sqlplus eqsys/XXXXXX@SESDEV
define SCH_NAME=EQSYS
define PROXY_USER=EQPROXY
define INST_USER=EQ_TEST
@$ORACLE_HOME/search/admin/eq0pkh.sql
@$ORACLE_HOME/search/admin/eq0plb.sql
@$ORACLE_HOME/search/admin/eq0bug_7586924.sql
cd $ORACLE_HOME/search/data/config/
cp crawler.dat crawler.dat.backup.03102010
vi crawler.dat
We're using the Oracle E-Business Suite R12 crawler, so we will add the line
USE_IN_MEMORY_QUEUE Oracle E-Business Suite R12
as the line immediately preceding IMPORT -
so the end of the file looks like this:
# system properies: separated by space for multiple system properties or define multiple SYSTEM_PROPERTIES
# logLevel values: DEBUG(2), INFO(4), WARN(6), ERROR(8), FATAL(10)
SYSTEM_PROPERTIES -Doracle.search.logLevel=4 -Doracle.search.log=oracle.search.util.Log4jImpl
USE_IN_MEMORY_QUEUE Oracle E-Business Suite R12
IMPORT -
Now on to patch 8321527
cd /mnt/oraclebackup/deathstar_patches/SES/post_patches/8321527
cd $ORACLE_HOME/bin
./searchctl stopall
cd -
opatch apply
cd $ORACLE_HOME/bin
./searchctl startall
sqlplus eqsys/XXXXXXX@SESDEV
define SCH_NAME=EQSYS
define PROXY_USER=EQPROXY
select object_name from user_objects where status = 'INVALID';
--should be no rows selected
@$ORACLE_HOME/search/admin/eq0pkh.sql
@$ORACLE_HOME/search/admin/eq0plb.sql
--should be no rows selected
restart SES
cd -
./searchctl stopall
./searchctl startall

CIF - Integration model name and APO application

Hi Experts,
In the CFM1 Transaction, there are 3 mandatory inputs are Model name, Logical system and APO application.
Logical systems are customized in CFC1 transaction. I couldn't trace the model name and application creation.
What is the transaction to customize/Create the new Model name and APO application.
Hope this is very simple question to you and expect your soon.
Thanks,
Saravanan V

Hi Somnath,
Thanks for ur reply.
First I saved the selection as variant. But it was not updated in the IM table.
Then I tried to generate the model and now I can see the details when I use the F4 help.
So, to create a integration model need to generate the variant once.
Thanks for the confirmation.
Thanks,
Saravanan V

Radio Mode options in simultaneous and non-simultaneous models

I bought an Airport Extreme on eBay which claimed to be the latest model (MC340B/A), but what I received wasn't; it was MB053B/A. The Radio Mode options on the MB053B/A show as:
802.11n (802.11b/g compatible)
802.11n only (2.4 GHz)
802.11n (802.11a compatible)
802.11n only (5 GHz)
What options do the latest model offer?
Also, if my model isn't simultaneous dual-band capable, in what way is it "802.11n (802.11b/g compatible)?"
Michael

Welcome to the discussions, MacGee!
MB053B/A is a previous generation AirPort Extreme that was discontinued in March 2009. Is it dual band capable....but not simultaneous dual band. In other words, the device can broadcast a radio mode of either 5 GHz or 2.4 GHz, +but not both at once+.
The newer generation models are simultaneous dual band. MC340B/A would be the one that you want for simultaneous dual band and guest network options.
Also, if my model isn't simultaneous dual-band capable, in what way is it "802.11n (802.11b/g compatible)?"
The 802.11n (802.11b/g compatible) Radio Mode is the default setting of the older AirPort Extreme. It will allow "n", "g" and "b" devices to connect at the 2.4 GHz setting.
If you change the Radio Mode on your model to 802.11n only 5 GHz, only "n" capable devices will be able to connect.
The newer simultaneous dual band model(s) use a default Radio Mode that looks like this:
802.11a/n 5 GHz -- 802.11n/g/b 2.4 GHz
The dashes separate the 5 GHz band on the left and 2.4 GHz band on the right. So devices can connect to either 5 GHz or 2.4 GHz depending on their capability. Faster "n" devices will connect at 5 GHz for fastest speeds. Older devices will connect at 2.4 GHz.
Message was edited by: Bob Timmons

BOM and PDS in integration model

Hi, All!!
Could you help me colleagues?
I try to create integration model in ECC (transacion CFM1), but at choice PDS or BOM the system gives out the message: "Integration model contains object types not valid for this APO release"
How to transfer in APO this data?

Thanks, I have understood

Cannot speak and listen simultaneously A205-S5825 Model Windows Vista, Realtek Sound Card

Hello there, My problem is that there is no sound coming from the speakers when speaking at the microphone. I can record my voice, but cannot speak and listen simultaneously... As far as I know there should be an option named Monitor Input in the Levels tab of the Speaker Properties in Windows Vista... However - I am missing such option... Any help would be greatly appreciated...

Hi Gangrene,
Try reinstalling your audio driver: http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=pv-58189-1&lc=en&dlc=en&cc=us&...
Also, watch this HP Support video on resolving sound problems to see if there are any other steps that will help.
Let us know how it goes.
...an HP employee just trying to help where I can, but not speaking on behalf of HP.

Integration Models and CCR simultaneously . .

Similar Messages

Maybe you are looking for