Integration of Adobe Connect and SAP Enterprise Portal

Hi All,
Is it possible to integrate Adobe Connect with SAP Enterprise Portal?
If so , how it can be done? Provide me with some details , links and materials.
Regards,
Eben.

HI,
Yes, this is Possible. You can use AppIntegrator Iview and Pass the URL for your Adobe Connect.
Thanks and Regards
Puneet

Similar Messages

BI content and SAP Enterprise portal connection

Hello All,
i m new to SAP enterprise portal , can anyone explain me the connection of BI content and Enterprise Portal.Please explain me the flow of publishing the Bi reports to EP.
Thnks in advc.

HI Sonal,
For publishing BI reports in portal you need to Integrate BI into Portal.
Please refer to SAP Notes:
916950
937697
They are very helpful.
Procedure for publishing after integrating BI with portal:
For this you need to create Roles-Worksets-Pages---Ivews.
The name of the report which you want to be displayed in TLN you need to make a Role for that and the tab under that name you need to create worksets for that and the content of the report you need to create an ivew for that in this way your report will be displayed in portal also you need to righht click on the workset and <add workset to Role>and similarly for ivew also keeping entry point "YES" for a role is mandatory with the main report name in TLN and and the sub tabs under below it and the content indetailed navigation.
For publishing simply create a Role --workset and an ivew .
During creation of an ivew the wizard will ask you for a Query string that Query will be given to you by your BI people you just neeed to copy that query after ? mark and paste it in and then save it hence your report is published in portal.
This is basically the proceddure for publishing BI reports in portal. You can ask any doubts if you hae in this.
Regards
Pooja
Edited by: Pooja Gehani on May 26, 2008 5:44 AM

Urgent help on sap XI and SAP enterprise portal integration

Hello friends,
This is an urgent requirement for sap xi integration with sap enterprise portal so can anyone help me by providing some demo on the same.
Pls specify the components required in the scenario and steps required for configuring the setup.
Any documents are welcome.
My email id is [email protected]
Points will surely be distributed for any document related to above scenario.
Its urgent.................
Regards,
Ameet
Message was edited by:
Ameet Jassani

Hi,
In addition to the above post, check the following links...
http://help.sap.com/saphelp_nw04s/helpdata/en/70/0837ced133304eba452c45b6047c74/content.htm
/thread/143082 [original link is broken]
/thread/126493 [original link is broken]
/people/prasad.illapani/blog/2005/11/14/payload-based-message-search-in-xi30-using-trex-engine
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/9974d3f7-0b01-0010-88ac-e4d9f15c9499
regards

Configure SSO Connection from SAP Enterprise Portal to BOE Server

Hi Guys,
We recently installed a BOE Server and want to connect it to our SAP Enterprise Portal. What we need is just to display the Crystal Reports via Enterprise Portal. We have set up the following:
SAP EP with AD Authentication
SAP EP configured with SNC to SAP BI7 system
SAP BOE XI 3.1 - SAP Integration Kit
BOE Server configured with SAP Authentication via SAP BI7 System
We've also set up BOE IK iviews and URL iviews pointing to existing reports in BOE. However, when we access it from EP, it prompts for a username and login to BOE. Is there a way to configure these so that there is no prompt for login to BOE server and SSO is used? Is it also possible to have a service account (e.g. domain/crystal) that will run the reports in BOE everytime a user accesses a report from SAP EP?
Let me know if this is at all possible

Hi,
You should configure InfoView for SSO first, which required infoview.xml file modification, using windows AD default authentication. If you want to utilize the OpenDocument URL for iView then you also need to configure OpenDocument.xml file for SSO also. The SAP portal must have trust relation with the SAP BW server so the Windows AD token can be authenticate with SAP BW server.
If you want crystal user to run all the report then you will lose data security. It can be done by hard coding user name and password in the report properties and database logon but the SSO capability can be accomplished only by windows AD, SAP or LDAP.
For more details check BOXI Admin guide and SAP Integration Guide.
Thanks,
Muhammad

Integration of WEBI report in SAP Enterprise portal

Hi Colleagues,
I want to create my adhco report using WEBI and want to publish it to SAP NW Enterprise portal .
While creating the i view in the EP i dint find any option in i view template in order to create an i view for WEBI report .
However there is an option to choose crystal report as a template while creating an i view but nothing for WEBI and Xcelsius as such. So how can we embedd our Xcelsius and WEBI report in SAP Enterprise portal .
Is there any option to intergate the SAP NW Enterprise portal and BO Portal .
Kindly sugest.
Vibhav.

You should be using opendocument links if using EP. with opendocument the URL contains all the pertinent info.
refer to chapter 8 of the SAP Integration kit guide for more info.
Post in the webi, general, or check out the outher documents link in the forum sticky post for the latest opendocument doc.
Regards,
Tim

Business Object, SAP BW and SAP Enterprise Portal

Hello all,
I've a few questions about the possibility for linking Business Object, SAP BW and the SAP Enterprise Portal.
The Business Package MSS 1.41 give us a functionality to display (in a federated portal) personalized Budget and costs in an Overview Iview (kind of Welcome page).
Those information are retrieved from SAP BW and I'd like to know if it's possible to retrieve those data (with the same functionality) from Business Object tool.
Is it possible to have those personalized reports without having a direct link (standard architecture) between SAP BW and the federated portal?
Thank you in advance fro your answers.
Matthieu

Hi,
The procedure to replicate BW users in BO is explained in detail on the blog of Ingo Hilgefort:
/people/ingo.hilgefort/blog/2008/09/19/businessobjects-and-sap--configure-sap-authentication
Regards,
Dave

About SAP BW 3.5 and SAP Enterprise Portal Integrating

I feature in the preview through BW webtemplate to preserve the iview feature, the system shows errors:
Portal Runtime Error
An exception occurred while processing a request for :
iView : N/A
Component Name : N/A
Cannot retrieve system 'BWDCLNT100' from UME.
How to solve this problem?

Hi,
Have you defined and tested concerned BI system??
Can you please elaborate how you went about creating this iview.
Hope you have done as described in following help pages
http://help.sap.com/saphelp_nw2004s/helpdata/en/33/39fa40ee14f26fe10000000a1550b0/frameset.htm
regards,
Sudhir

Cognos Iviews integration into SAP Enterprise portal 7.0-Error

Dear Experts,
I had integrated the cognos iviews into SAP Enterprise portal and facing some problems.
in the navigator iview i am able to see folder structure
Public Folders and My folders .
when i click Public Folders following details are coming
GoSales ( analysis ) | -->Product analysis
|--> Time vs Product sales
GoSales( Query)
OSD_CO3
on click of Product analysis (any link) link i am getting following error
Cognos 8 -> An error has occurred.
DPR-ERR-2079 Firewall Security Rejection. Your request was rejected by the security firewall.
CAF rejection details are available in the log. Please contact your administrator.
Apart form this images are not displaying in the portal iviews.
regards
ratnakar

Hi Ratnakar,
This might be a authorization issue, you might not have appropriate permissions to use the public folder. Contact the authorization team to resolve this error they might help you.
Rgs,
I.R.K

Adobe Connect and Efront LMS

Hello!
I have a problem with integration of Adobe Connect and Efront learning managment system. I read that it is possible somehow despite the fact that there are no special module in Efront for Adobe Connect, but that's what the Efront support said:
"Connecting eFront with Adobe Connect Pro was in our Roadmap on the past.
It was never materialized due to resource restrictions. However, it was feasible using efront api and the interconnection offered from Adobe Connect Pro (if that helps)."
So, does anybody know how it is possible to do? Because I don't have programming skills. Thank you very much.

It would be through the Connect APIs and eFront's APIs. This would likely take some programming skill, as there is no 'plug-and-play' option. I don't know of anyone who has built out this integration, but, maybe someone will chime in here.
You might try reaching out to a group that is comfortable building out this functionality and seeing if it can be done within your budget. Maybe start with ActiveC and see if they can help, or if they know someone who can. http://www.activec.biz/software/bespoke

Connect of 2 SAP BW systems to one SAP Enterprise Portal

Hi!
I have 2 SAP BW systems that should be integrated into SAP Enterprise Portal.
I currently have already one SAP system entry "SAP_BW" within SAP EP.
Questions
Is it possible to define second entry for second SAP BW system in order to use 2 SAP BW systems with one SAP EP in parallel?
Where can I find appropriate documentation?
Thank you very much!
regards

Hi,
We have a pilot portal with BW DEV, QAS and PRD connected to it. So it is possible.
It may be more appropriate to post this in the portal forum to get expert advice.
Mathew.

Integration of SAP enterprise portal with ATG dynamo platform

This is more an architectural question.
There is an existing web application running on the ATG 5.x/6.x B2C platform that takes orders from dealers for a retailer. It integrates with a SAP system using proprietary integration mechanisms. This is the existing architecture.
There is a idea to use the SAP netweaver platform, specifically the SAP enterprise portal that will integrate with the ATG dynamo platform.
ATG 6.2 and above allows integration in 2 ways :
1) Use web services
2) Integration framework using JMS/RPC etc
[Pl. see the ATG documentation www.atg.com/support]
I have been reading thru number of articles on SAP netweaver and looking for multiple options for the above integration.
My theoretical understanding is:
a) Develop a connector to the ATG platform using connector framework and invoke a web service on the ATG platform that expose the business logic built on the ATG platform
b) Does SAP XI come into picture if the portal tries to create a business process out of one single application.
c) Are there any other options?
I'm completely new to the SAP netweaver platform but have a good idea on SOA.
Any help or inputs on this will be highly appreciated.

Hello,
I can give you a suggestion from the Connector framework point of view. We are currently developing a generic webservice connector which will enable to create content using CF, which will be sent as WS requests for function execution. The connector is planned to be released for New-York 7.1 Netweaver branch. For the mean time I can suggest, as you did, to develop your CF connector which will connect to ATG exposed WS.
Best Regards,
Ran

Is there User Group and Role Reporting in SAP Enterprise Portal?

I want to know if there is a way to pull users statistics our of SAP Enterprise Portal like you can out of the R3 backend systems.
I would like functionality similar to the SUIM transaction. I know through user administration you can access any user, even a list of all users, and you can do similar lists with roles and groups. You can then access any of these things individually and look at their assignments. However, I want to do this on a large scale. I want to know for example every group that has a user assigned to it. Evergroup that has roles assigned to it. Or groups that have no user or role assignments. We have approximately 1904 groups in our Production Portal system and I am trying to clean up the groups that have no user assignment, but I don't want to look through them one by one.

Hi Chris,
There is no standard report available for this purpose. However all this information is stored in table UME_STRINGS.
You can write your own SQL queries to generate such reports. However please note that this table is not normalized, and it's a master UME table. You should use it strictly for READ ONLY purpose.
For a sample code you which i wrote some time back, you might refer:
http://forums.sdn.sap.com/thread.jspa?threadID=2088099&messageID=10859334#10859334
Thanks
Prashant

SAP Enterprise Portals and Webdynpro application development environment

Hi,
Is there a way to set up a Development environment for SAP Enterprise Portals and Webdynpro on a laptop/desktop without SAP-GUI.
Any help/guidance will be truly appreciated.
Thanks,
Prasanna

hi,
can you look at this
[http://www.sap-hefte.de/download/dateien/1000/075_leseprobe.pdf]
[http://www.octavia.de/fileadmin/octavia_files/content_bilder/Hauptnavigation/SAP_NetWeaver/WebDynpro/Tutorial_1.pdf]
[http://www.sercononline.com/suntechnovate07/images/images/13%20-%20Rajiv%20Jain%20-%20SAP.pdf]
Regards,
Muralidhar

Integration for Business Workflow and SAP Interactive forms by Adobe

Hi
Is any of you able to watch the following SDN eLearning Session ?
<i>Integration for Business Workflow and SAP Interactive forms by Adobe (RIG session 7)</i>
I can play nearly all the other eBooks, but not this one. Any idea ???
Regards, bernhard

I solved the problem.
It is not possible to view the ebook with IE 7.0. So I removed the new Internet Explorer and everythink is working fine.
Greetings, Bernhard

Adobe Connect and integration to Sitecatalyst

Hi there,
is there any type of documentation about the connection of Adobe Connect and Sitecatalyst?
I know how to set up the integration inside Adobe Connect, but then in Sitecatalyst I get a lot of data which I'm not able to manage.
Any tutorials, best practices, recommendations, etc?
Thanks!

HI,
Yes, this is Possible. You can use AppIntegrator Iview and Pass the URL for your Adobe Connect.
Thanks and Regards
Puneet

Integration of Adobe Connect and SAP Enterprise Portal

Similar Messages

Maybe you are looking for