Integration of BO-XIR2  with BI7.0 for reporting......

Hi folks !!
Can  any body tell  how do we retrieve data from BI system to BO to do report...
I appreciate yours help.... thanks in advance.
Regards
Prabhakar

Hi Prabhakr, Welcome to SDN,
Check: [Business Objects eLearning Catalog|https://www.sdn.sap.com/irj/sdn/businessobjects-elearning]
[Business Objects Articles|https://www.sdn.sap.com/irj/sdn/businessobjects-articles]
Hope it Helps
Srini

Similar Messages

  • Integrating Webcenter 11g (Discussions)  with OAM  for SSO

    Hi,
    I need some help in integrating Webcenter 11g with OAM 10g.
    Objective:
    =========
    My customer is using Webcenter 11.1.1.2.0 and they are primarily using Discussions and wiki .I would like to integrate OAM with Webcenter for providing SSO.
    Steps Followed:
    ============
    I have followed the steps mentioned in the section 23.7.1 and 23.7.1.7 in the doc
    http://download.oracle.com/docs/cd/E15523_01/webcenter.1111/e12405/wcadm_security.htm#BGBCEHGE
    and also referred metalink note ID 829122.1
    Scenario after integrating with OAM:
    ===========================
    1.Accessed the dicussions url through OHS proxy http://<ohs_host>:<ohs_proxy>/owc_discussions
    2.Click on Login button
    3.OAM Login page appears
    4.Provide credentials for orcladmin (admin user of OAM OID LDAP)
    5.Discussions default login screen appears ( I dont expect this default login page,as I have already authenticated with OAM)
    6.Provide orcladmin credentials
    7.Login screen is keep on popping and not able to login
    if i set owc_discussions.sso.mode=false,then looping (Step 7) is not occuring and could able to login.
    Am I doing anything wrong here? Or is there a way I can make it work.
    Thanks in Advance.

    Did you setup weblogic as per this doc? - http://download.oracle.com/docs/cd/E17904_01/webcenter.1111/e12405/wcadm_security_sso.htm#WCADM8175

  • Integrating OBIP with GRC for Reporting

    Hello Experts
    I am very new to the GRC suite. I wanted to know if it is possible to use OBIP for developing custom reports for AACG to meet specific audit requirements. Are there any OOTB report templates that can be loaded in OBIP for eGRC?
    Regards
    Deepali B

    1.Technically you should be able to use OBIP to develop custom reports for AACG although the effort required might be significant, although some integration is provided between EGRC 8.6.4+ and OBIP OOTB.
    2.No there are no OOTB report templates that can be loaded in OBIP for eGRC.
    Regards

  • Xml publisher of R12 with apex for reporting

    Hi gurus,
    can i use the inbult xml publisher engin of R12 to configure Apex reports.
    Please Help
    Regards
    Vishal

    NO, the license for that version of BI Publisher does NOT allow you to use it with external tools.... You would be better off getting a new licensed version for your APEX install...
    Thank you,
    Tony Miller
    Webster, TX
    There are two kinds of pedestrians -- the quick and the dead.
    If this question is answered, please mark the thread as closed and assign points where earned..

  • Integrating WebDynpro ABAP applications with UWL for workflow in Portal

    Dear
    We want to integrate an abap webdynpro application as task in the workflow with UWL.
    More information was found in /people/ginger.gatling/blog/2005/12/14/create-new-uis-for-existing-workflow-tasks-with-abap-web-dynpro-and-universal-worklist
    But no answer on the following issue:
    We use the transaction SWFVISU to prepare standard setting for our  task. This defines how a task is executed, once you select the task subject line on the worklist.
    Task                           TS91700001
    Visualization Type             ABAP Web Dynpro
    APPLICATION     z_wd_pas
    DYNPARAM     IV_WIID=${item.externalId}&period=${item.PERIOD}
    NAMESPACE     SAP
    SYSTEM_ALIAS     SAP_BSP_EREC
    But we want to start the abap webdynpro application with a dynamic parameter: period 07.2010 or 08.2010 or MM.YYYY. This parameter is a container element of the task, filled when the task is created. Also other parameters are available in the abap webdynpro application.
    Component       Z_WD_PAS
    Interface View  PAS
    Plug Name       DEFAULT
    Help Menu Text
    Help Link
                                                                                    Package         Z_PAS
    Language        EN
    URL             http://saperpd1.imec.be:8000/sap/bc/webdynpro/sap/z_wd_pas                                                                               
    with parameters
    IV_WIID     000000000000     SWW_WIID
    ORG_UNIT     00000000     ORGEH
    PERIOD                              SPMON
    PERNR     00000000     PERSNO                            
    Can we set the dynamic parameter list DYNPARAM from the task
    or should  we read the container in our abap webdynpro application described in http://wiki.sdn.sap.com/wiki/display/WDABAP/IntegratingWebDynproABAPapplicationswithUWLforworkflowin+Portal?
    More information: The task is a webservice
    Standard task        91700001   Z_PAS_CC
    Object Category      BOR Object Type
    Object Type          WEBSERVICE   WebFlow Service
    Method               PROCESSDIALOG                      Dialog Service
    with the following standard program code for this method:
    begin_method processdialog changing container.
    DATA: l_wi_objkey TYPE swotobjid-objkey.
    DATA: l_wiid TYPE swwwihead-wi_id.
                                                                                    CALL FUNCTION 'SWE_WI_GET_FROM_REQUESTER'
      IMPORTING
        requester_workitemid = l_wi_objkey.
    l_wiid = l_wi_objkey.
                                                                                    CALL FUNCTION 'SWF_WSC_START_LH_DIALOG'
      EXPORTING
        i_wiid                 = l_wiid
      EXCEPTIONS
        url_creation_failed    = 1
        browser_launch_failure = 2
        OTHERS                 = 3.
    IF sy-subrc <> 0.
      CASE sy-subrc.
        WHEN 1.
          exit_return '1000' space space space space.
        WHEN 2.
          exit_return '1001' space space space space.
        WHEN OTHERS.
          exit_return '1002' space space space space.
      ENDCASE.
    ENDIF.
    end_method.                                           
    Before calling the function SWF_WSC_START_LH_DIALOG the parameters for the abap webdynpro should be defined. Is this possible ?
    Thanks for your suggestions.
    Best regards
    Luc Marent

    I added below sources .
    >    <ItemType name="uwl.request.webflow.WS91000001" connector="WebFlowConnector" defaultView="WorkItemRequestsView" defaultAction="launchWebDynPro" executionMode="default">
    >      <ItemTypeCriteria systemId="UWLSETXXX" externalType="WS91000001" connector="WebFlowConnector" />
    >      <Actions>
    >        <Action name="launchWebDynPro" groupAction="" handler="SAPWebDynproABAPLauncher" returnToDetailViewAllowed="yes" launchInNewWindow="yes" launchNewWindowFeatures="resizable=yes,scrollbars=yes,status=yes,toolbar=no,menubar=no,location=no,directories=no">
    >          <Properties>
    >            <Property name="WebDynproApplication" value="ZWD_WF_002" />
    >            <Property name="newWindowFeatures" value="resizable=yes,scrollbars=yes,status=yes,toolbar=no,menubar=no,location=no,directories=no" />
    >            <Property name="DynamicParameter" value="wi_id=${item.externalId}" />
    >            <Property name="openInNewWindow" value="yes" />
    >            <Property name="System" value="WDSETXXX" />
    >            <Property name="WebDynproNamespace" value="sap" />
    >            <Property name="display_order_priority" value="5" />
    >          </Properties>
    >          <Descriptions default="" />
    >        </Action>
    >      </Actions>
    >    </ItemType>
    >    <ItemType name="uwl.request.webflow.decision.WS91000001.UWLSETXXX" connector="WebFlowConnector" defaultView="WorkItemRequestsView " defaultAction="viewDetail" executionMode="default">
    >      <ItemTypeCriteria systemId="UWLSETXXX" externalType="WS91000001" connector="WebFlowConnector" />
    >    </ItemType>

  • Error with FOP for Report Printing in Apex 3.2.1

    We are trying to use FOP deployed onto GlassFish Community but after setting up as described in the applicaton express guide to allow report printing; we are getting the following error
    'package oracle.xml.parser.v2' does not exist
    We are running GlassFish on Debian 5.0 (Lenny)
    Any help appericated :)

    Here is what I did to get it to work.
    1. Copy xmlparserv2.jar from my ORACLE_HOME/oc4j/lib directory to my glassfish domains/domain1/applications/fop/WEB-INF/lib directory.
    2. Added the following two lines to the glassfish domains/domain1/fop/apex_fop.jsp before the driver.run() line
    out.clear();
    out = pageContext.pushBody();The second part of solution I found on another forum page.

  • Integrating Canon Raw Converter with Aperture (for G9)

    This is a follow up question to an email I posted last night on Apertures incompatibility with Canon G9 Raw Format.
    DOes anyone or has anyone tried to integrate the Canon Raw Converter that came with the G9 in with Aperture? I thought of it this morning. My thought is to identify the Canon Raw converter as the external editor. Changes can be made in Canon RAW then saved. There would be the additional picture created in Aperture that I can modify. Granted the saved format would need to be a jpeg or tiff file format.
    Any thoughts? Has anyone tried this?
    Also, what is a high quality format the file can be saved once changes are made in Canon RAW?
    Thanks

    Using 'Open in External Editor' in Aperture tells Aperture to convert the RAW file to either a TIFF or PSD and send that to the external editor, not the RAW file. So if a camera is unsupported by Aperture you can't use the command...
    Ian

  • Best Strategy for Integrating Crystal/Business Objects with OpenACS Environment

    Post Author: devashanti
    CA Forum: Deployment
    I'm working for a client that uses AOL server and OpenACS for their web services/applications. I need suggestions on the best strategy to integrate a reporting solution using Business Objects XI. Ideally I'd like to send an API call from our web application's GUI to the Crystal API with report parameter values to pass into specific reports called via the API - I can get it down to one integer value being passed - or if this is not possible a way to seamlessly, from the end user perspective, move into a reporting module. We are using an Oracle backend database. I'm experienced with creating stored procedures and packages for reporting purposes.
    Although I have many years of experience integrating the Crystal active X controls into n-tier client server applications, the past few years I have had little opportunity to work with Business Objects and the newer versions of Crystal or web based solutions with Crystal Reports. I signed up to try out crystalreports.com, but I doubt my client will find this solution acceptable for security reasons as the reports are for an online invoicing system we are developing. However we can set up a reports server in-house if necessary, so it gives me some testing ground.
    Can anyone provide suggestions for a doable strategy?

    Please post this query to the Business Objects Enterprise Administration forum:
    BI Platform
    That forum is monitored by qualified technicians and you will get a faster response there. Also, all BOE queries remain in one place and thus can be easily searched in one place.
    Thank you for your understanding,
    Ludek

  • Crystal Report Viewer Credential Prompt for Report with Dynamic Parameters

    The .NET Crystal Report Viewer is prompting for database credentials when launching a report containing dynamic parameters. This only occurs for reports created with SAP Crystal Reports 2011 designer. Reports created with Crystal Reports XI designer (where dynamic parameters were first introduced) work correctly.
    The credential prompt window contains the following fields:
    - Server Name: <server name> (disabled)
    - Database Name: <database name> (disabled)
    - User Name: <empty> (enabled)
    - Password: <empty> (enabled)
    - Use Single Signon Key: false (disabled)
    The values in the prompt window which are disabled are the database connection values used during the design of the report in the SAP Crystal Reports 2011 designer.
    Expected Result:
    - No prompt for database credentials.
    - Values read from the database should be populated in a drop down for the dynamic parameters.
    Environment:
    - Visual Studio 2010 (C#)
    - Windows 7 Enterprise
    - SAP Crystal Reports runtime engine for .NET Framework 4
    - SAP Crystal Reports, version for Visual Studio 2010
    - SAP Crystal Reports 2011
    The database connection is being set to use a DSN. It must be a DSN as the calling application is only aware of the DSN/Username/Password values. These values are being passed to the Crystal Report Viewer contained in a Windows form.
    The database connection for the report is being set as follows:
    foreach (InternalConnectionInfo internalConnectionInfo in this.report.DataSourceConnections)
        // Must set the UseDSNProperties flag to True before setting the database connection otherwise the connection does not work
        if (internalConnectionInfo.LogonProperties.ContainsKey("UseDSNProperties"))
            internalConnectionInfo.LogonProperties.Set("UseDSNProperties", true);
        // Supposed to set the database connection for all objects in the report (ie. main report, tables, sub reports)
        internalConnectionInfo.SetConnection(this.DSN, string.Empty, this.LoginName, this.Password);
    The SetConnection method's signature is as follows:
       SetConnection(string server, string database, string name, string password)
    As you can see from the code snippet above I am setting the DSN name as the server parameter, blank for the database parameter (a database connection using DSN should only require DSN name/Username/Password) and the database username and password respectively.
    Is this a SAP bug?
    Is this the correct way of setting the database connection to use a DSN?
    Is there some other properties that need to be set somewhere else in the report through code?
    Any help would be greatly appreciated.

    Thanks for the pointer to the database connection code generator. After taking a look at the output from the tool I was able to finally get the dynamic parameters to load and populate properly without prompting for credentials. I needed to tweak the outputted code a bit to match my requirements of using a DSN only connection.
    Instead of updating the database connection properties contained within the Report.Database.Tables collection from the CrystalReports.Engine namespace, I changed it to replace the database connection properties in the Report.ReportClientDocument.DatabaseController.Database.Tables collection from the CrystalDecisions.ReportAppServer.DataDefModel namespace. For one reason or another, using the RAS namespace solved the problem.
    Below is the updated code with the change made:
    using RAPTable = CrystalDecisions.ReportAppServer.DataDefModel.Table;
    foreach (InternalConnectionInfo internalConnectionInfo in this.report.DataSourceConnections)
        // Must set the UseDSNProperties flag to True before setting the database connection
        if (internalConnectionInfo.LogonProperties.ContainsKey("UseDSNProperties"))
            internalConnectionInfo.LogonProperties.Set("UseDSNProperties", true);
        // Sets the database connection for all objects in the report (ie. main report, tables, sub reports)
        internalConnectionInfo.SetConnection(this.DSN, string.Empty, this.LoginName, this.Password);
    // The attributes for the QE_LogonProperties which is part of the main property bag
    PropertyBag innerPropertyBag = new PropertyBag();
    innerPropertyBag.Add("DSN", this.DSN);
    innerPropertyBag.Add("UserID", this.LoginName);
    innerPropertyBag.Add("Password", this.Password);
    innerPropertyBag.Add("UseDSNProperties", "true");
    // The attributes collection of the tables ConnectionInfo object
    PropertyBag mainPropertyBag = new PropertyBag();
    mainPropertyBag.Add("Database DLL", "crdb_ado.dll");
    mainPropertyBag.Add("QE_DatabaseType", "OLE DB (ADO)");
    mainPropertyBag.Add("QE_LogonProperties", innerPropertyBag);
    // Pass the database properties to a connection info object
    ConnectionInfo connectionInfo = new ConnectionInfo();
    connectionInfo.Attributes = mainPropertyBag;
    connectionInfo.Kind = CrConnectionInfoKindEnum.crConnectionInfoKindCRQE;
    connectionInfo.UserName = this.LoginName;
    connectionInfo.Password = this.Password;
    // Replace the database connection properties of each table in the report
    foreach (RAPTable oldTable in this.report.ReportClientDocument.DatabaseController.Database.Tables)
        RAPTable table = new RAPTable();
        table.ConnectionInfo = connectionInfo;
        table.Name = oldTable.Name;
        table.QualifiedName = oldTable.QualifiedName;
        table.Alias = oldTable.Alias;
        this.report.ReportClientDocument.DatabaseController.SetTableLocation(oldTable, table);
    this.report.VerifyDatabase();
    Thanks again Ludek for the help.

  • Expense Types with Input Tax (GST) - mapping to GL Account for reporting

    We are in the process of implementing Expenses for countries like Australia & New Zealand, which have GST.
    Expense Types were created and different Tax Codes were defaulted to the expense types, as per the requirement. Some Expense Types have no GST while some do have a Tax Code to 10% Input Tax
    The issue is, I cannot find a config step to map the Expense Types to Tax GL accounts so that the Finance office in Australia / New Zealand can submit their claims end of the year by pulling up a report from this GL. I can do the regular mapping of Expense Types to specific GLs. I can even settle & post the expenses to FI and reimburse the employees but there is no way I can record the receipts which have taxes on them into the tax GLs for reporting purposes.
    Any inputs on how this can be mapped or addressed is much appreciated. We went live with a bunch of countries but, the GST quotient is holding us off from going ahead with AU and NZ.
    Here's an example - Expense Type is Dinner. This is mapped to GL 123456. When an employee submits an Expense with the Dinner, it is settled and posted to FI against the GL 123456. The reimbursement is done. But, the Dinner expense receipt has 10% GST which the Finance team wants to submit and claim the tax breaks end of the year. We want all the expenses with 10% tax be mapped to GL 800900. But this is only for reporting reasons. No postings done against the GL 800900.
    So, we are looking to map all the Expense Types with Input Tax 10% to GL 800900 and all Expense Types with Input Tax 15% to GL 700600
    Here's some of the Tax Config that was done ...
    1). SPRO -> Financial Accounting -> Travel Management -> Travel Expenses -> Master Data -> Control Parameters for Travel Expenses -> Define Global Settings ... Input Tax is set to "Input Tax per Travel Expense Type"
    2). SPRO -> Financial Accounting -> Travel Management -> Travel Expenses -> Master Data -> Control Parameters for Travel Expenses -> Travel Expense Types -> Create Travel Expense Types for Individual Receipts ... in the Expense Type, "Tax Code" field is set the either 0% or 10% Tax Codes

    Issue is resolved ... I misunderstood the logic. Tax Code is linked to a GL account. And when I run PRRW, I see the relevant Tax amount in against the trip

  • Creating a range with Substitution Variables for Report Script

    Is it possible to create a range with substituion varables for use in a report script. For example instead of listing "Jan" "Feb" "Mar" "Apr" in the report script can I use a sub varaible like Jan:Apr that will list them all out?

    while I have not had luck with ranges in report scripts, others have. You could have a substitution variable the is "Jun" "Jul " "Aug" or whatever you want the members to be. and it will replace jusr fine

  • Formula for report to run with data of only current day

    I need a report that whenever refreshed it run with data for only the current day. It is for knowing how many checks were performed from the start of the current day to the time the report runs. Iu2019ve tried to use the select expert but I guess I need to use a formula in it.
    Thanks,
    Andreia

    Andreia,
    I think you've posted this into the wrong forum!
    -Anil

  • GR with backflush not for reporting point logic with autom. GR option

    Dear Experts,
    While doing backflashing though MFBF we are getting following error
    "GR with backflush not for reporting point logic with autom. GR option"
    We have maintained 5 production version for this material while calling with first production version we are getting the error.
    Rate routing & BOM maintanied for the FERT material
    Thanks

    Did you check the BackFlash option are actuvated in the following places ?
    1. In the Rate routing, the backflush indicator is set in the component assignment.-CA22
    2. In the material master record, the backflush indicator has the characteristic "Always backflush".-MRP3
    3. In the material master record, the backflush indicator has the characteristic "Work center decides", the indicator being set in the work center.-CR21-Basic Data View .
    4.Goto-MM02-MRP4 View -Select the PV-Goto Details -Check particularly this production version REM Allowed or not
    5.You should use REM-Profile -0004/0003  where RP and Auto GR with RP at last Back Flashing Activated .
    6.Check Rate Routing Operation Control Key -Auto GR  with indicator Confirmation required
    Regards
    JH
    Edited by: Jiaul Haque on Jun 22, 2010 11:19 AM

  • How the data is fetched from the cube for reporting - with and without BIA

    hi all,
    I need to understand the below scenario:(as to how the data is fetched from the cube for reporting)
    I have a query, on a multiprovider connected to cubes say A and B. A is on BIA index, B is not. There are no aggregates created on both the cubes.
    CASE 1: I have taken RSRT stats with BIA on, in aggregation layer it says
    Basic InfoProvider     *****Table type      ***** Viewed at      ***** Records, Selected     *****Records, Transported
    Cube A     ***** blank ***** 0.624305      ***** 8,087,502      ***** 2,011
    Cube B     ***** E ***** 42.002653 ***** 1,669,126      ***** 6
    Cube B     ***** F ***** 98.696442 ***** 2,426,006 ***** 6
    CASE 2:I have taken the RSRT stats, disabling the BIA index, in aggregation layer it says:
    Basic InfoProvider     *****Table Type     *****Viewed at     *****Records, Selected     *****Records, Transported
    Cube B     *****E     *****46.620825     ****1,669,126****     6
    Cube B     *****F     ****106.148337****     2,426,030*****     6
    Cube A     *****E     *****61.939073     *****3,794,113     *****3,499
    Cube A     *****F     ****90.721171****     4,293,420     *****5,584
    now my question is why is here a huge difference in the number of records transported for cube A when compared to case 1. The input criteria for both the cases are the same and the result output is matching. There is no change in the number of records selected for cube A in both cases.It is 8,087,502 in both cases.
    Can someone pls clarify on this difference in records being selected.

    Hi,
    yes, Vitaliy could be guess right. Please check if FEMS compression is enabled (note 1308274).
    What you can do to get more details about the selection is to activate the execurtion plan SQL/BWA queries in data manager. You can also activate the trace functions for BWA in RSRT. So you need to know how both queries select its data.
    Regards,
    Jens

  • SAP Jam Integration with Cloud For Customer error

    Hello Experts,
    We are integrating SAP Jam with Cloud for Customer tenant. We have followed the instructions that are mentioned in 1311 guide for SAP Jam integration.
    But right now we are getting an error on SAP FEED work center and Account View.
    Error that we are getting is as follows:
    You are not authorized to access /c/C0000209652T.com/widget/v1/feed?wid=1&auth=single_use_token&skin=gr&faces=true&type=follows&num_items=30&avatar=true&live_update=true&mobile=false&post_mode=inline&reply_mode=inline&single_use_token=&locale=en
    Kindly help us understand the mistake or step that we might have skipped.
    Thanks & Regards,
    Chandan Bankar

    My example in the document deals with User ID as key_identifier.
    ie., we need a unique key which is common to both servers so that we can identify accounts. This is done through assertion attribute exchange.
    For eg, if I have an account with userID vatsav in C4C, then I must have an account with same userID in JAM (or vice versa) provided I set UserID for "Account Name Origin" in Step 10.
    Doing this way, I am telling JAM that I am using UserID as an assertion attribute which identifies both my accounts in C4c and JAM without any problem. When you login into C4C using vatsav as UserID, it automatically searches feeds for same userID in JAM and displays them in Mashup.
    It's a big concept actually. Implementation's already done by SAP.
    Hope, I am clear.

Maybe you are looking for

  • Drag and Drop CSV file onto a table in Number

    Hi everyone ! I really love the new version of iWork. However I can't find a feature I was heavilly using which is the drag and drop of a CSV file into numbers which creates the table associated to this file. Is there anyone who has find a way to re-

  • Problem with the preview window in Premiere Elements 10

    Hi guys, I have a question: I have a new PC (data follow) and Adobe Premiere Elements 10. My problem is that I see in the preview-window only one grey picture. The sound runs without problems! In other chats I red, that perhaps my graphic card is the

  • Convert Video Switch in Desktop Software

    What happens when I use  the convert video switch in the Desktop Software when I am syncing videos to and from playbook.  Having problems playing video clips tagged as AVI.  Get error message on Playbook when I go to play the clips.  Assuming not a t

  • Bonjour Wont start (Error 6)

    I seem to be yet another person having trouble getting bonjour to install correctly. I am currently running on windows 7 64 bit, i can get itunes to install fine but i get warnings about bonjour not starting resulting in not being able to access remo

  • Trying to run Sourcing Home localy

    Hello, I'm trying to run Sourcing Modlule localy so I can make (and test) some extensions on it. The problem is that one of the pages, when running localy, gives me an annoying NullPointerException and I can't find what is making it happen. I've alre