Integration of BW system with R/3 system

Hi,
I have a doubt regarding integration of BW system with R/3 system.
Can we integrate both the systems without using NetWeaver-XI,
If so how can we integrate them and make the data to be interchaged between both BW and R/3 servers.
Can we load both servers in a single opreating system and simultaneoulsy run both the servers and if so what is Hardware requirement we need.
thanks and regards
konala

Hi,
I am working on ABAP-XI and now I want to move in to BW stream.
I am looking for Certification in NetWevaet2004s-BI7.0. through SAP / Seimens.
Can any body tell the approximate Cost of Certification on BI7.0 in India as well as in USA also.
Bye
Satish Kumar Reddy

Similar Messages

Integrating project planning software with business planning systems (ERP)

Hello there
I have been trying to obtain information about "integrating project planning systems with business planning systems (ERP, PLM)" but I could not find any proper source. Would you help me out on this?
I would like to focus on what benefits can be expected from a close integration of project planning
tools and enterprise information systems such as ERP and what evidence is there that
this is being exploited. If you can help me out with proper sources, I would be appreciated.
Best Regards

Hi,
As per my understanding i think you would like to know the benefits of integrating your legacy Project Planning system with the ERP system. Please correct me if am wrong. If that is what you require, please search the forum as i am very sure that there are threads that explain the benefits of integration.
Regards,
Gokul

Integrating project planning software with business planning systems (PLM)

Hello there
I have been trying to obtain information about "integrating project planning systems with business planning systems (ERP, PLM)" but I could not find any proper source. Would you help me out on this?
I would like to focus on what benefits can be expected from a close integration of project planning
tools and enterprise information systems such as ERP and what evidence is there that
this is being exploited. If you can help me out with proper sources, I would be appreciated.
Best Regards
Edited by: warhammer on Jul 16, 2010 10:14 PM

Dear Warhammer,
Please find some useful info in the following links.
1.http://wiki.sdn.sap.com/wiki/pages/viewpage.action?pageId=56766
2.http://directory.partners.extranet.microsoft.com/collateral/4956/MSP_SAP_Integration_TheProjectGroup_e-v1.ppt.
Regards
Prasad K
Edited by: Prasad K on Jul 19, 2010 5:28 AM
Edited by: Prasad K on Jul 19, 2010 5:32 AM
Edited by: Prasad K on Jul 19, 2010 5:32 AM

How to integrate the portal system with non-sap system

Hi Gurus,
How to integrate Portal system with non-SAP system?
I know few ways .......Using Usermapping UIDPW method.
Using Appintegrator .....and using Business repository objects in JCA?
Is there anyother way to integrate if so please give me the names and steps for integrating it?
Thanks in Advance,
Dharani

Hi Dharani,
You can get information from the following links:
http://help.sap.com/saphelp_nw04s/helpdata/en/43/d08b00d73001b4e10000000a11466f/frameset.htm
https://www.sdn.sap.com/irj/sdn/thread?threadID=744043
SAP CONNECTORS:- Basically Connectors are like middlewares , that we use to connect to the backend system including Non SAP systems also. Will try to explain it to u with some examples of SAP Connectors:-
a) SAP Business Connectors:-
A middleware application based on the B2B integration server from webMethods.
The SAP Business Connector enables both bi-directional synchronous communication and asynchronous communication between SAP applications and SAP and non-SAP applications.
The SAP Business Connector makes all SAP functions that are available via BAPIs or IDocs accessible to business partners over the Internet as an XML-based service.
The SAP Business Connector uses the Internet as a communication platform and XML or HTML as the data format. It integrates non-SAP products by using an open, non-proprietary technology.
b) SAP Java Connector:-
SAP Java Connector (SAP JCo) is a middleware component that enables the development of SAP-compatible components and applications in Java. SAP JCo supports communication with the SAP Server in both directions: inbound calls (Java calls ABAP) and outbound calls (ABAP calls Java).
SAP JCo can be implemented with Desktop applications and with Web server applications.
SAP JCo is used as an integrated component in the following applications:
1) SAP Business Connector, for communication with external Java applications
2) SAP Web Application Server, for connecting the integrated J2EE server with the ABAP environment.
SAP JCo can also be implemented as a standalone component, for example to establish communication with the SAP system for individual online (web) applications.
To Know more go through,
SAP Java Connectors
II) ALE Concept:-
ALE is not restricted to communication between SAP systems, it can also be used for connecting SAP Systems to non-SAP systems.
By using IDocs as universal information containers, ALE can reduce the number of different application interfaces to one single interface that can either send IDocs from an SAP system or receive IDocs in an SAP system.
SAP certified Translator Programs can convert IDoc structures into customer-defined structures.
Alternatively, the RFC interface for sending and receiving IDocs can be used in non-SAP systems.
In both cases you need the RFC Library of the RFC Software Development Kit (RFC-SDK).
This link gives a great insight into landscape for Connectivity to Non-SAP systems:-
SAP to Non-SAP systems
III) Communication Between SAP Systems and External (Non-SAP) Systems using RFC:-
When you use RFC for communication with an external (non-SAP) system, you can also implement the SAP Java Connector or the SAP .Net Connector for the conversion of data. However, there are no specific security requirements for these components, since they only perform internal system conversion functions.
The additional security recommendations for communication with external systems in this section make particular reference to cases where an external system is used as a server (SAP calls the external system). If you use an external system as a client (the external system calls SAP), the appropriate SAP-specific security mechanisms are implemented on the SAP side.
This link explains in detail all the security considerations you need to take for connecting to an External Non SAP system like, User administration, Network Security etc.
Communication Between SAP Systems and External (Non-SAP) Systems using RFC
Hope this helps,
Regards,
Rudradev Devulapalli
Reward the points if helpful

PO No range when we ink two SRM system with One ECC system

Hello Experts,
We have a client requirement to link Two SRM Systems with One ECC system.
In this case what number range we need to maintain in both SRM systems for PO.
-The number range of ECC PO should get update whenver the PO is transferred from any of the two SRM system.
-We have Extended classic scenario.
-Also PO Doc type is going to be same.
Can we handle this by increasing the buffer of the number range in one of the SRM system?
Any idea...pls help urgently.
Best Regards,
Anil
Edited by: anil.s.verma on Oct 1, 2010 4:33 PM

Hello Anil,
Being in Extended Classic Scenario (leading PO being in SRM, R/3 PO number range is concidered as external because PO number is given by SRM), the only solution for you is to:
1- give same number range interval for PO (internal in SRM system 1 and SRM system 2, external number range in R/3), e.g. 3100000000 - 3199999999
2- in SRM system 2, fill in current number with (for example) 3159999999 and let empty (or current value) in SRM system 1
3- assign, in each system for your concerned transaction type, number range as internal in SRM and external in R/3.
In this way, you will avoid overlaping in R/3 between PO numbers coming from SRM system 1 and SRM system 2
Regards.
Laurent.

Integrating WebSphere Portal Server with Sun Java System Access Manager

Hi All,
Is it possible to Integrate WebSphere Portal Server with Sun java System Access Manager?. If so plz send me any doc or web site link for the same.
Thanks in Advance
Rgds,
Lessly J

Rushi-Reliance wrote:
Kindly let us know how to proceed further as we are waiiting some reply from your team.As I already advised in your previous posting (http://forums.sun.com/thread.jspa?threadID=5359095), you are best off re-installing solaris from scratch and installing Communication Suite 6 update 1 if you cannot get Access Manager 7.1 configured.
Regards
Shane.

Connect to R/3 systems with different XI systems

Hi all,
I have the next scenario:
R/3 system A --> XI system A --> Other systems
R/3 system B --> XI system B --> Other systems
Both systems have different SLD system.
And I need create an IDOC interface between both R/3 systems.
Could somebody help me?
Can I send and IDOC to a XI system with only configure a RFC connection (SM59) or I need configure it in SLD?
Regards, Raú

Hey
are u suppose to do an IDOC(R/3 system A)-Xi-IDOC(R/3 system B) scenario,of u have to collect IDOC's from both the R/3 systems and send it to a single file?
in any case u have to maintain separate Business system and logical system name for both R/3 systems
thanx
ahmad
Message was edited by:
Ahmad

If SAP FICO as standalone system with other legacy system.

Hi All,
If SAP FICO as a standalone sytem with other legacy systems what is the impact on the SD module.
For eg: what we will miss or cant do the transcations with the SD perspective in SAP.
Thanks
ANGKS

Hi,
1. Yes all the dat needs to be copied
2. You can just assign the users in your orginazation structure to the profiles(Master data specialist, steward etc.) in BRF+
3. After copying the data to your standalone ECC 6.0 instance, all the process of data governance happens on your standalone system and once it is done you can replicate the data to your SAP 4.7 system. According to my experience, no functionalities will be missing.
Regards
Goutham Kanithi

Consideration during Multiple ECC systems with One APO system for PP/DS

Hi All,
We have a scneario that Multiple ECC systems and Third party ERP systems and Legacy systems .What are the points to be considered for this scenario when using with PP/DS?

Hi,
The factors to be considered will greatly depend how the multiple ERP systems are split, if they are split on geographical aspects only (all modules in all ERP systems then no major issues) - the problem will become a little challenging when Multiple ERP are split with different modules in different instances then major thought has to go in your CIF design (the IMs has to properly though of ).
It is not a detailed explanation but just the line of thought.
Regards,
Vineet

How to RDP access my Windows server 2012 system with Windows 7 system

In the VMWARE workstation, I have a " Windows server 2012" & " WIndows 7" OS deployed. I am not able to RDP the " Windows server 2012" from "Windows 7" system even though i have performed the below step.
1. Enabled the " Allow Remote Connections to this comptuter " in windows server 2012
2. Disabled the firewall in Windows server 2012.
Can someone advice me on the below.
1. How to RDP my windows server 2012 from my Windows 7 with " Firewall disabled" & "Firewall Enabled" conditions

Hi,
Just make sure that the firewall is disabled in all three profiles Domain/Private/Public.
Create a incoming UDP rule on firewall to allow port 3389 and give a try.
http://social.technet.microsoft.com/Forums/windowsserver/en-US/b1ec4602-7120-4660-a1ba-e05289a479cf/windows-2012-r2-firewall-blocking-remote-desktop?forum=winserverTS
Regards,
Rafic
If you found this post helpful, please give it a "Helpful" vote.
If it answered your question, remember to mark it as an "Answer".
This posting is provided "AS IS" with no warranties and confers no rights! Always test ANY suggestion in a test environment before implementing!

2 ECC systems with 1 APO system

Hi All,
We have the same data in 2 ECC clients linked up to an APO box. We had to do that to test the new data load and the project did not invest in a new APO box.
We plan to keep all in one Business System Group as we want the same product, location numbers etc in APO. Using separate BSGs and CIF exits to modify product numbers etc is not an option as it will impact all BI reports etc..
I would like to know if it is possible to have such an architecture. If yes, how does the APO system send back the information to ECCs, how does it know where to send, if both ECC systems are specified in publications.
Regards,
Zeeshan.

my basis is very basic but - have you looked at partitioning into separate clients? i suppose you can connect two different ECC systems to two different clients in APO
if you dont want locations to be changed it will turn to be a little difficult i think. if you did not have that issue you could prefix the location based on the ecc system. there are some posts in this forum on that

How do I integrate SAP R/3 with an external system?

Hi there!
I've run into a problem integrating SAP R/3 with an external system. The external system provides a webservice, and when I try to get WSDL file from that service, I am getting asked of authorization and when I authorize, I get error 500. The access is anonymous, as I'm being told. When I try to get just a response, server requests authorization. No matter what login and password I supply, I always get error 401 saying I'm not authorized.
I think the ICF is somewhat misconfigured, but how do I configure it? Or maybe there's a problem with requests I send. I don't know.
Please help!
Regards, Dima

Hi,
You don't provide any info on how you want to cosnume the web service, but pls check things like
/people/thomas.jung3/blog/2005/04/21/webservice-navigator-page-for-abap-and-java
/people/thomas.jung3/blog/2005/04/27/webservice-navigator-page-for-abap-and-java-part-2--abap-unit
/people/thomas.jung3/blog/2005/05/13/calling-webservices-from-abap-via-https
/people/thomas.jung3/blog/2004/11/17/bsp-a-developers-journal-part-xiv--consuming-webservices-with-abap
Eddy
PS.
Put yourself on the SDN world map (http://sdn.idizaai.be/sdn_world/sdn_world.html) and earn 25 points.
Spread the wor(l)d!

Adding systems with same SID in SMSY - solution manager

Dear All,
We are having systems with same SID's which belongs to different landscape created for various customers.
Currently We are having only one solution manager.
I consider this example for explanation.
Customer 1 : DEV --> QAS --> PRD ( SID's)
customer 2 : DEV --> ACC --> PRD ( SID's)
I would like to add these 6 systems in a solution manager. For Customer 1 , I have included the systems in SMSY . But when i tries to add DEV, PRD for customer 2 , it fails since this SID's are already present.
Is there any other way to include by giving the different SID's DE2 but with correct IP and host Or we need to have one more solution manager ? Please anyone suggest me on this
Thanks
Raj

Dear Juan ,
We can add systems with same SID in smsy. I have attached the way in which i have done. This may help others. Thank you all for your suggestion
Only use more than three characters if your landscape contains multiple systems with the same system ID (if you have a mirrored backup system that has the same ID as the original system, for example).
If multiple systems in your landscape have the same system ID, choose as system name the system ID with a suffix of up to 5 characters (a sequential number, for example) to create a unique system name.
The system accepts a system name of more than 3 characters if you choose Enter to confirm.
Thanks
Raj

STMS Configuration - Change Virtual System with Real System

Dear all,
My system, if I go in the transaction STMS in DEV system, was configureted in the following way:
DEV => QA => PROD (Virtual System)
Now, I want to change the PROD Virtual System in PROD Real System.
How Can procede?
Can you explain step-by-step the process?
Because the system was configureted from other people, and I'm new to using the STMS.
Thanks in advanced for your help.
Best Regards,
Giulio

Hi,
After the planned system is physically installed it is time to replace the Virtual System with the realized system.
The procedure for the same is as under:
1) Delete the Virtual System from the transport domain
. Login into Transport Domain system client 000
· Using STMS got to Overview=> Systems
· Chose SAP Virtual System=> Delete (confirm)
· Distribute configuration change.
As soon as the configuration change is distributed, the virtual system is deleted. The import queue for this system in TMS disappears but it is available as import buffer at the operating systems level.
Now add the new (physical system) to the transport domain:
If STMS is configured as standalone system then first delete STMS configuration on PRD system
login into PRD system client 000. (delete STMS configuration if present.)
run stms -> it's ask for set up STMS -> click on other configurition (F6)
Target Host -> host name of domain controller ( host name of transport domain system)
System number -> Instance number of domain controller ( instance number of transport domain system)
Now,
Go to the Transport Domain Controller and accept the system. (As the import buffer is available at the operating system level, no change requests will be lost)
Distribute the configuration changes.
regards,
kaushal

Sharing an extractor with another BW system possible?

Dear all,
We currently run BW3.1. Now we would like to install NW2004s next to it.
Is it possible to use the same extractor with delta loads when you have only 1 source system with 2 BW systems?
Do both BW systems contain all information after delta loads?
Thanks in advance,
Ralph

Hi,
Yes, its possible. You can have just one source system, feeding multiple BW systems. But in your case, I'll be careful as you are trying to upload data to 2 different versions of the BW system. You have to check and test for the PI versions on the R3 side. Your current set of PI versions on R3 will have to be upgraded if you are planning to connect the system with the netweaver 04s version. Once you upgrade, you also need to make sure that the data loads work fine with your older BW version as well.
Cheers,
Kedar

Integration of BW system with R/3 system

Similar Messages

Maybe you are looking for