Integration of CISCO PRIME 1.3 with ACS 5.2

Hi
we are trying to integrate the CISCO PRIME 1.3 with ACS5.2 .We have configured the attribute for admin users in ACS shell profile.
virtual-domain0=ROOT-DOMAIN
total task is 159
After then configured a rule in default device admin.
Default Device Admin> Authorization>
Shell profile is choosen
Command set is full acess.
but not able to get the access of PI .

Please check the below link which may be helpful for you:
Link-1
http://www.cisco.com/en/US/docs/wireless/prime_infrastructure/1.2/configuration/guide/ctrlcfg.html

Similar Messages

Cisco Prime Collaboration Deployment with BE7K and VMWare license

Hello, I am looking for some help trying to figure out if Cisco Prime Collaboration Deployment can be used to upgrade our existing 7.1.5 cluster. From what I have read there is a API problem with the VMWare license that comes with the BE7K. But after reviewing the BOM/quote from my VAR it lists the foundation license which based of the release notes is supported.
UCSS-U-VMW-FND-5-1
UCSS Cisco UC Virt. Foundation Five Year - 1 server
Has anybody out there had expericne with PCD and BE7K'?
This is from release notes of PCD
http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/rel_notes/10_5_1/CUCM_BK_P139675A_00_pcd-rns-1051/CUCM_BK_P139675A_00_pcd-rns-1051_chapter_010.html
Search for “Business Edition 7000” and it will state it is not supported with PCD. It is because the licenses that the BE 6k and 7K are shipped with don’t enable certain VMware APIs that PCD needs.
“Virtualization Software License Compatibility
Cisco Prime Collaboration Deployment is not compatible with all license types of VMware vSphere ESXi, as some licenses do not enable required VMware APIs.
The following are compatible with Cisco Prime Collaboration Deployment:
Cisco UC Virtualization Foundation (appears as "Foundation Edition" in vSphere Client)
VMware vSphere Standard Edition, Enterprise Edition, or Enterprise Plus Edition
Evaluation mode license
The following are not compatible with Cisco Prime Collaboration Deployment:
Cisco UC Virtualization Hypervisor (appears as "Hypervisor Edition" in vSphere Client)-preloaded on Cisco Business Edition 6000 and Business Edition 7000
VMware vSphere Hypervisor Edition
Any help would be appreacted.
JP

Thanks Jamie for repsonding, we haven't made any purchase's yet but I wanted to ensure we are purchasing a solution that won't lead to a lot of frustration. We only have 1000 phones so we are pretty small and the BE7K seems to be a good fit and value.
Cheers,

License trouble when replace cisco Prime 1.3 with version 2.1

Hi,
problem with license migration from PI1.3 to PI2.1.
In my PI 1.3 system I do have 2 license files only AP lifecycle, no extra base license file.
As I migrated to PI2.1 there is maybe a need for a base license, because the PI system now has a warning: "Base license is missing"
Unfortunately I only received 2 lifecycle *.lic files.
Is the base license also installed like a lifecycle license, via a license file?
Why the PI1.3 system worked without an extra base license file?
Maybe due to a former migration from old WCS with an add of 25 AP license file that included the base license in the 25 AP feature license?
Thank's for any suggestions.
Alois

Hi Steve,
The license portal did not work when when I migrated from WCS to NCS. About 2 years ago I lost all my registered PAK + licenses + Order ID's within the portal.
So anyway, now I sent the PAK numbers I found to the licensing team. I extracted them from my old license files.
The license files are all in the PI directory /opt/CSCOncs/licenses
Also the old WCS and for the old NCS license are still there. And now I can find the license files for the new PI 2.1 in that directory.
Why are also the new license files in this directory, but did not appear on the PI license file section of the Web-GUI?
Is there anything I can check on the PI system to find the error e.g. logfiles ?
Best regards
Alois

LMS PRIME 4.2 integrating with ACS 4.2

Hello,
i would like to integrate new lms prime 4.2 with acs.4.2 . .. !!
is there document or user guide for this version of lms?
Thanks in advance.
Marwan

IN LMS 4.2 there is nothing which is known as Integration (like LMS 3.x), since it added feature RBAC.
Now ACS can just be used as PAM to have ciscoworks authenticated for Tacacs+ or Radius. After the auth is done, you should have a authorization set in LMS locally for user, else it will be given a default HELP DESK access.
For more details check :
Authentication Using Login Modules - Overview
-Thanks

Cisco Prime Service Catalog & Process Orchestrator Integration

Hi,
I want to integrate Cisco Prime Service Catalog with Cisco Process Orchestrator using service link.
How to integrate it. Is there any docs for CPO & CPSC integration.

I replied on your other thread on the same topic. Please see that.

Can't import images in cisco prime infrastructure 1.2

- Any job , trying to import images, in my cisco prime infrastructure fails with :
Jan 14 13:14:53 cisco-prime 01/14/13 13:15:18.040 ERROR [service] [pool-4-thread-19] IFM_SWIM_EXCEPTION: [com.cisco.ifm.swim.service.exception.IfmSwimParserException: Cannot populate software image info object from the image.]
How I can I solve this one ?
Tx,
M.

I seem to have the same problem, strangely enough importing a universal image for 2960s worked fine, but I get thos error when trying to import a 3750x image

Cisco prime 2.2.0 "Telnet/SSH : Unreachable"

Hi,
I've installed the Cisco Prime 2.2.0 OVA (VMware) and ran discovery with a Credential Profile.
some of the device has discovered with complete state and some with Partial Collection Failure state.
when trying to edit the device (under network inventory) and verify credentials i'm getting the above error "Telnet/SSH : Unreachable", but when SSH from the Cisco Prime CLI with the same credentials all works just fine.
%SSH-5-SSH2_SESSION: SSH2 Session request from X.X.X.X (tty = 1) using crypto cipher '', hmac '' Failed
please help...
10x
Eyal

Hi Afroz,
All of my net devices use AAA for login.
I'm using credentials profile to discover my devices and some of them has discovered as they should and some of them are partialy discover with the Cisco Prime log it with CLI/ssh issue.
But when I'm SSH to the partialy discovered device via the Cisco Prime CLI with the same credentials as configured at the credential profile, I'm able to login with no issue.
Please note - while I'm editing the partialy discovered device and testing the credential via the Prime GUI, it display the error message "Telnet/SSH : Unreachable" - and the device log meeage is %SSH-5-SSH2_SESSION: SSH2 Session request from X.X.X.X (tty = 1) using crypto cipher '', hmac '' Failed.
What does it mean?
10x
Eyal

Cisco prime 1.2

Hey guys!
We got damaged Prime 1.2 and i want to reimage it, but can't undesrtand how to do it. I got
NCS-APL-1.3.0.20-1-K9.iso, i know that is for 1.3 but i hope its not a problem. so idlike to perform full remage from this iso but when i burn thisto USB and trying to boot from it i got - no DEFAULT or UI directive and promt with boot: int console.
Could you guide me for step-by-step actions to reimage my prime 1.2 Physical APL ?
Thank you!

Hi Valery,
Instead of USB ,can you burn it on DVD and follow the below steps:
Step 3 Burn the ISO image file to a DVD.
Installing Recovery Image
Warning The following procedure will completely reinstall the appliance and all data on
the appliance will be removed. You must copy any data or files that you would like to keep
from the appliance before performing this procedure.
Step 1 Reboot the Cisco Prime Infrastructure appliance with the recovery ISO DVD inserted.
The Cisco Prime Infrastructure Welcome screen appears.
ISOLINUX 3.11 2005-09-02 Copyright (C) 1994-2005 H. Peter Anvin
Welcome to Cisco Prime Network Control System
To boot from hard disk, press .
Available boot options:
[1] Network Control System Installation (Keyboard/Monitor)
[2] Network Control System Installation (Serial Console)
[3] Recover administrator password. (Keyboard/Monitor)
[4] Recover administrator password. (Serial Console)
Boot existing OS from Hard Disk.
Enter boot option and press .
boot:
Step 2 Select the desired install option, 1 or 2, depending on how you are connected to
the appliance.
The installation will take approximately 30 minutes. After the ISO image is installed, the
Cisco Prime Infrastructure appliance reboots. When the reboot completes, the following
prompt will appear and the appliance will be wiped clean.
Kindly type 'setup' to configure the appliance
Thanks-
Afroz
[Do rate the useful post]
****Ratings Encourages Contributors ****

Cisco Prime Infrastructure 1.2 synchronizaton with active directory

hi all
I have installed Cisco Prime Infrastructure 1.2 and I want to make a synchronization between the PI and the active directory
note:
I want to make that to be able to search about the users on cisco prime infrastructure using Hostname instead of serching on it using IP or MAC address.
how can I do this task ???
thanks all.
I appreciate your support.

Hi Mohamed,
Integration with AD is not supported in PI
Thanks-
Afroz
[Do rate the useful post]

Using ACS for Cisco Prime authentication

I'd like to use our Tacacs server running ACS to be the authentication method for user accounts in Prime, but don't even know where to start with this..
Any pointers?

The configuration on the Prime Infrastructure side is minimal: define the authentication server Prime is to use and select a mode for Prime Infrastructure to use with it.
Administration > AAA > TACACS+ Servers > add tacacs server.
Administration > AAA > AAA Mode Settings > tacacs+ and enable fallback to local.
The bulk of the configuration is on the authentication server side, particularly indefining groups, services and authorization tasks. This is covered in the "Performing Administrative Tasks" chapter of the Prime Infrastructure Configuration Guide, starting with the topic "Configuring ACS 5.x"
http://www.cisco.com/en/US/docs/wireless/prime_infrastructure/1.3/configuration/guide/admin.html#wp1595935
"Configuring ACS 4.x"
http://www.cisco.com/en/US/docs/wireless/prime_infrastructure/1.3/configuration/guide/admin.html#wp1625896
https://supportforums.cisco.com/docs/DOC-17909
In case it doesn't work, please get the logs from the ACS reports and monirtoring for tacacs authentication and error message while accessing cisco prime.
Jatin Katyal
- Do rate helpful posts -

Cisco Works LMS R3.1 with ACS R5.1

I search on internet about the AAA integration between LMS R3.1 y ACS R5.1, and all the information that I found it's related to ACS R4.1. It's possible to integrate with ACS R5.1.
Regards and thanks in advanced
Luis Martinez

Nael,
Sorry to batter you, but I was trying to migrate my Cisco Works LMS R3.1 to R3.2 and from the support page of CISCO I just can donwload the following version LMS R3.2.1 (LMS R3.2 service pack 1). I tried to install that version but i got an error that saids "LMS R3.2.1 needs LMS R3.2 installed on the server"
Could you please tell me where can I download the complete and initial LMS R3.2.
Thanks in advanced for your kindly help.
Luis Martinez

Cisco Prime 2.1 Third Part Integration

Does anybody already has integrated Cisco Prime with Third party system through Sockets or CORBA ?

Those aren't supported methods. The REST API is the recommended method to integrate external tools.

Issue with backup NCS via NFS (Cisco Prime NCS 1.2.0)

Hello,
Does someone have issue with backup NCS via externally mounted location (NFS)?
I have Cisco Prime NCS 1.2.0 and tried backup it to external resources, but I have issue with my free space:
NCS/admin# backup ncs repository backup_nfs
% Creating backup with timestamped filename: ncs-130131-0534.tar.gpg
INFO : Cannot configure the backup directory size settings as the free space available is less than the current database size.
You do not have enough disk space available in your repository to complete this backup.
DB size is 25 GB
Available size is 12 GB
Please refer to the command reference guide for NCS and look at the /backup-staging-url/ command reference to setup the backup repository on an externally mounted location
Stage 5 of 7: Building backup file ...
-- complete.
Stage 6 of 7: Encrypting backup file ...
-- complete.
Stage 7 of 7: Transferring backup file ...
-- complete.
I have tried to add additional space and use command backup-staging-url (my configuration: backup-staging-url nfs://server2008:/nfs), but it didn't help me.
NFS share works perfect. I have checked it via NFS repository:
repository backup_nfs
url nfs://server2008:/nfs
+++++++++++++++++++++++++++++++++++++++
NCS/admin# show repository backup_nfs
NCS-130130-1135.tar.gpg
NCS-130130-1137.tar.gpg
NCS-130130-1157.tar.gpg
NCS-130130-1158.tar.gpg
test-130130-1210.tar.gz
Everytime when I try create backup I receive error message "You do not have enough disk space available in your repository to complete this backup".
Does someone know how can I backup NCS system?
Thank you

How much space is availabe on that NFS mount point? It looks like to me from the error message that there is only 12 GB....
The backup-staging-url is just for a space used to stage the backup before it is written-----

LMS 3.2 integration with ACS 5.1

Hi
Is it
/* Style Definitions */
table.MsoNormalTable
{mso-style-name:"Table Normal";
mso-tstyle-rowband-size:0;
mso-tstyle-colband-size:0;
mso-style-noshow:yes;
mso-style-priority:99;
mso-style-qformat:yes;
mso-style-parent:"";
mso-padding-alt:0cm 5.4pt 0cm 5.4pt;
mso-para-margin-top:0cm;
mso-para-margin-right:0cm;
mso-para-margin-bottom:10.0pt;
mso-para-margin-left:0cm;
line-height:115%;
mso-pagination:widow-orphan;
font-size:11.0pt;
font-family:"Calibri","sans-serif";
mso-ascii-font-family:Calibri;
mso-ascii-theme-font:minor-latin;
mso-hansi-font-family:Calibri;
mso-hansi-theme-font:minor-latin;
mso-bidi-font-family:"Times New Roman";
mso-bidi-theme-font:minor-bidi;
mso-fareast-language:EN-US;}
possible to integrate LMS 3.2 with ACS 5.1? I know it works with ACS 4.X, but I can't get it to work with ACS 5.1.
Here is a link to how to do it with ACS 4.X:
http://www.cisco.com/en/US/prod/collateral/netmgtsw/ps6504/ps6528/ps2425/prod_white_paper0900aecd80613f62.html
Regards
Reidar

/* Style Definitions */
table.MsoNormalTable
{mso-style-name:"Table Normal";
mso-tstyle-rowband-size:0;
mso-tstyle-colband-size:0;
mso-style-noshow:yes;
mso-style-priority:99;
mso-style-qformat:yes;
mso-style-parent:"";
mso-padding-alt:0cm 5.4pt 0cm 5.4pt;
mso-para-margin-top:0cm;
mso-para-margin-right:0cm;
mso-para-margin-bottom:10.0pt;
mso-para-margin-left:0cm;
line-height:115%;
mso-pagination:widow-orphan;
font-size:11.0pt;
font-family:"Calibri","sans-serif";
mso-ascii-font-family:Calibri;
mso-ascii-theme-font:minor-latin;
mso-fareast-font-family:"Times New Roman";
mso-fareast-theme-font:minor-fareast;
mso-hansi-font-family:Calibri;
mso-hansi-theme-font:minor-latin;
mso-bidi-font-family:"Times New Roman";
mso-bidi-theme-font:minor-bidi;}
Thanks Reidar.... hmm very strange. I really wish an expert would respond to this thread as it will help a lot of people who might be planning to deploy these versions and they can help put this matter to rest once and for all. Not sure why LMS 3.2 will not support ACS 5.1 and it might help to know when it will (updates etc). Kindly let me know if you get any further information. My deployment is so large that setting a local username and password on all the devices is not an option unfortunately .......

UPS monitoring support with Cisco Prime Infrastructure 1.2

Dear Members,
Good day,
I am having a project implemented wherein i have the UPS power redudancy solution for our network devices.
Now can anyone gide that is it possible for below :-
UPS units installed with SNMP cards be monitored via Cisco Prime Infrastructure 1.2 as our monitoring & management solution is Cisco Prime Infrastructure 1.2 ?
if yes
Can you guide if following action would be possible to export the below logs from UPS unit to our Cisco Prime Infrastructure 1.2
   a) UPS fault status information
   b) UPS operational status(input power available Y/N)
   c) Battery fault status
   d) Battery charging current
   e) Battery charge level
   f) Output current
Conclusion is we need to confirm that would it be posible to achieve remote monitoring of these UPS units via our CPI 1.2
Thanks in Advance for your support & replies to this query.
Regards,
Muzammil N.

Prime Infrastructure 1.2 can manage non-Cisco devices in a limited fashion via SNMP query and trap processing. It cannot import logs and does not have a generic syslog server,
So if your devices have snmp read only support and can generate SNMP traps for the above you can add them to PI. Follow the manual add device procedure here.

Integration of CISCO PRIME 1.3 with ACS 5.2

Similar Messages

Maybe you are looking for