Integration of cProject and R/3

Dear All,
Can any one send the config details of how the cProject data can be integrated to R/3 projects (CJ20N).
Is there a way that create project on any of side can be reflected and updated to both side automatically ??
Enjoy SAP......
Ketan Dave

Hi Neil,
i need to integrate CRM cprojects with R/3 PS. there is adapter object available ( CPROJECTS ) for this. but it does not do the initial load of projects through R3AS. can anyone please let me know how i can achieve this.
Thanks and Regards
Sudhir Grover

Similar Messages

SD Integration in cProjects

Hello,
I am using cProjects with hierarchical accounting. The point I am not getting is the SD Module.
The workflow is using cProjects to make the projects structure and then the PS structures is generated automatically by cProjects with the PS template. Now I am recording times with CATS/ESS.... everything is clear to this point.
The point is the SD module.
I have seen one scenario using a normal standard order with the DP90...
- Is it possible to use the same standard order with the DP90 several times for billing different time periods or do I have to create a standard order for everytime I want to run the DP90?
- Is it possible to use a service order instead of the standard order? If yes, where can I maintain the connection between the PSP-element and the order?
- How are you using the integration between cProjects and CO to SD. How deep is this integration? What is it able to do?
It would be nice if someone could bring the light into the darkness...
Thx a lot,
Vanessa

Hi Everyone,
although Vanessa found her answer, I though this might interesing for whole community I asked my local DP90 expert. And this is what he has to say:
Is it possible to use the same standard order with the DP90 several times for billing different time periods or do I have to create a standard order for everytime I want to run the DP90?
If standard order is a sales order created via VA01, than it works in the following way: You call transaction DP90 and the system determines all confirmations created for the time period entered in selection screen and checks if the cost records selected were already billed. If there are open amounts/quantities you can bill them. So, you can use the same sales order over and over again.
Is it possible to use a service order instead of the standard order? If yes, where can I maintain the connection between the PSP-element and the order?
No, it's not possible to use a service order created via IW31 in standard. If you have to use a service order you can use enhancements within Dynamic Item Processor ( see also attachment to note 301117 ) to provide this.
How are you using the integration between cProjects and CO to SD. How deep is this integration? What is it able to do?
You can create an inquiry with cProjects planned costs using DP81 (see SAP Best Practices D50 and D83, too).
Additionally, you can use the functionality which is possible in ERP Project System if you have got a PS Project linked to the project in cProjects (multi-level controlling) like budget.
I hope others having similar questions find these answers usefull.
Best regards,
Thomas

Integration with cfolders and cprojects

Dear Experts,
Provide me cookbook for integration of cfolders and cprojects through KM.OR can anyone guide me about how we can do ?
Rewarded for the answer.
Thanks

Hi,
WebDAV interface enables a connection to be set up between cProjects or cFolders and SAP KM in the Portal.
Please find the below helpful links,
http://help.sap.com/saphelp_ppm400/helpdata/en/1b/8688428b42c553e10000000a1550b0/frameset.htm
https://forums.sdn.sap.com/message.jspa?messageID=7916774
Regards,
Vasu

Integration of cfolders and cprojects with KM

Dear experts,
can anyone guide me and tell the process or cookbook material for cprojects.
My requirement is ..
1) what is cprojects and cfolders what are its benefits in organisation ?
2) How it can integrate with KM?
Thanks in advance and provide you valuable marks for gud answer.
Regards
RS

Hi RS,
1. cProjects has additional functionality over Project Systems in being web based (webdynpro) so can be accesses externally to the organisation (hence the "c" for collaboration projects). It follows a stage gate methodology and has better resource management functions that PS. cFolders is complimentary to cProjects for sharing project documentation, which is better than say using DMS in ERP.
2. cFolders can integrate to collaboration rooms on the Enterprise Portal and hence to KM. There is standard Portal content for this.
Hope this helps.
BR
Dave

CProjects and xRPM Testing

Hi All,
What do we do test in cProjects and xRPM? Is it just the navigation and creating the roles, authorizations etc? or do we need to go into the backened (ECC) and validate? can someone throw some idea of testing cProjects. Also if we need to go into the backend, what are the tcodes we need to know? Someone please help me. I am a newbie.
Regards,
Vin

Hi Vinu,
From an end-user perspective, cProjects/xRPM is a pure web-based application. Everything is done in the browser.
Backend transactions are mainly used by:
- system administrators: authorizations, user accounts, monitoring (SU01, PFCG, SM37...)
- technical experts / ABAP developers: SE80, SE11...
- system configuration depending on your architecture and integration: HR module (PPOSE, PP01...), PS (CJ20N, OPSN, OPSI...), CRM... Actually all transactions linked to the corresponding module
Regards,
Matthias

Setting up ALE to integrate cProjects and HR CATS

Hi Gurus,
We're wondering if it is mandatory to set up ALE to integrate cProjects and HR CATS. We found SAP note 954860 and we were trying to understand it, on a functional point of view, before to send it to our Basis team.
We would like to get some advice on this.
Could you please give us any hint?
Thanks in advance for your response,
Best regards,
TP

Hi TP,
it is not mandatory. Basically you have two options for resources:
- you can create resources (business partners) manually in cProjects. then you do not need the ALE integration to HR
- or you can replicate the employee master data to cProjects. then you don't need the manual maintenance, but you have to setup the HR integration
for CATS:
- if you like to do time recording through CATS, you need the corresponding integration
- alternatively you have some easy-to-use task dashboard for the resources involved in the projects inside the cProjects appliation. Users can access the tasks they are responsible for through there. but you do not have full CATS functionality then
best regards
Thorsten

Accounting Integration in cProjects

Hi,
I am working on cProjects and right now our team is facing issues with Accounting Integration. It would be of great help if we can get some documentation on accounting integration in cProjects. If any one has something please email it to [email protected]
Thanks and regards,
Ankur
9820997870

Hi Reema,
Could you please help me in acct integration with cProjects.
We are doing like ,1. Creating PS WBS structure manually in ECC 6.0
2. Trying map the cProject phase and task to manually created WBS to the structure in cProject.
I have done config as per the SAP document.
i am getting error costing data not valid, do you have any document to handle this type of multi level controling in cproject, please forward.
Bijaya my email is [email protected]

Accounting Integration with cProjects documentation

Hi !!
I am working on cProjects and right now our team is facing issues with Accounting Integration. It would be of great help if we can get some documentation on accounting integration in cProjects. ...
I've cProjects Implementation Guide.
e-Mail Id: [email protected]
Thanks,
Jyoti

Take the reference of the Best Practices Configuration Guides, Link to them is
http://help.sap.com/bp_bblibrary/600/BBlibrary_start.htm
Refer Building Block P60: Project Management in R&D with cProjects , it can be helpful
Regards
Sreenivas

Difference between SAP cProjects and SAP Project System

Hi,
SAP already has a solution PS ( Project System ) for managing the projects in an Organization.
When there is a solution already existing then why did SAP come up with a new solution cProjects ?
Can any help me in understanding the main differences and advantages between cProjects and PS ?
Thanks and Best Regards,
Priyatham

Hi.
I have copied an SAP text below which sets PS, cProjects, (x)RPM and PPM into context.
In the ninties, the Project System was developed within SAP R/3 to provide a powerful application with full integration into logistics and financials.
Target groups were industries such as engineering and construction, automotive, high tech or utilities with focus on project manufacturing or large maintenance projects.
Later on, the need for more flexible and easy-to-use tools supporting the new process methodologies, phased-based approaches, quality gates, and so on, emerged. SAP developed Collaboration Projects and Collaboration Folders (cProjects Suite), which takes these new requirements into account and provides extensive features to collaborate with internal and external partners using a HTML-like interface and Web Application Server technology.
Thus, cProjects was able to address to a broader range of industries, such as service providers, offering a high degree of visibility and flexibility to support various scenarios from product development to consulting projects. Nevertheless, cProjects is seen as a complementary product to Project System, not as ist successor!
It always depends on the scenario that a customer wants to cover, which application is the best choice.
As another matter of fact, combinations of both are also possible.
In addition to this, the new generation of composite applications was born and SAP xApp for Resource and Portfolio Management provides excellent capabilities to align operational project management with strategic portfolio management.
The latest developments bring all these three applications tighter together and offers a comprehensive solution for project and portfolio management by covering logistical, financial and human resource aspects and addressing the needs of all stakeholders throughout the entire organisation.
However, xRPM capabilities are not only restricted to project portfolios but can be leveraged to control all kind of portfolio items.
Regards / Anders

CRM 5.0 Integration with Twitter and facebook

HI Experts,
i am working with SAP CRM 5.0 version,
My existing client want to set up SAP CRM with twitter and Facebook specially customor services ,
Does SAP CRM 5.0 has tight integration with twitter and facebook ,
if yes will you please share iinformation in terms of
1)Effort Estimation :manpoer
2)Costing details
Thanking you in advance
Pravin shete

@sherrysarath: Could you share some documents to understand how standards works for this issue? And if there aren't standards requirements, could you share your custom solution.
@pravin wipro : Could you explain what are your requirements?

Is it a Bug? Integration between Dreamweaver and Fireworks is broken in somewhere?

I can not upload images related my topic here but you can see
it in the same topic at
http://www.fireworksguruforum.com/index.php?showtopic=14282
I use CS3 Suite. It is a big trouble for me in working on
real pages. Integration is broken in somewhere else and after that
point it becomes impossible to work on Fireworks through
Dreamweaver.
I've made test to show this trouble and I narrowed the
problem to the pictures as shown in the figures below,
1) In figure one I am creating a completely new Fireworks
file as arrow.png with two frames and one slice in it. After I am
saving it as .png I am exporting it as .html with images in /images
subfolder.
2) After saving and closing the file in Fireworks, in figure
two, I am opening the html in Dreamweaver and changing the page
properties by writing zeros to page margins and by changing the
default font.
-----I guess in this point something happens which breaks the
integration between FW and DW--------because;
3) In figure three I am opening the .png through Dreamweaver
(by "Edit") and changes the place and size of the slice a little
bit
4) When I press Done in Fireworks I see this picture in
figure four in Dreamweaver which shows integration between FW and
DW about table structure is broken. (In this point if I add any
behaviur to the slice DW doesn't recognize it, or any other change
in FW can not be recognized by DW)
5) In order to show this broken integration in table
sturucture, I am putting a new slice to png when Editing from DW in
FW.
6) When I click on Done in DW I see this picture on the
figure six. Beacuse FW doesn't have any effect on html's table
structure code.
I can not upload images related my topic here but you can see
it in the same topic at
http://www.fireworksguruforum.com/index.php?showtopic=14282

damlays wrote:
> I can not upload images related my topic here but you
can see it in the same
> topic at
>
http://www.fireworksguruforum.com/index.php?showtopic=14282
>
>
> I use CS3 Suite. It is a big trouble for me in working
on real pages.
> Integration is broken in somewhere else and after that
point it becomes
> impossible to work on Fireworks through Dreamweaver.
>
> I've made test to show this trouble and I narrowed the
problem to the pictures
> as shown in the figures below,
>
> 1) In figure one I am creating a completely new
Fireworks file as arrow.png
> with two frames and one slice in it. After I am saving
it as .png I am
> exporting it as .html with images in /images subfolder.
>
> 2) After saving and closing the file in Fireworks, in
figure two, I am opening
> the html in Dreamweaver and changing the page properties
by writing zeros to
> page margins and by changing the default font.
>
> -----I guess in this point something happens which
breaks the integration
> between FW and DW--------because;
>
> 3) In figure three I am opening the .png through
Dreamweaver (by "Edit") and
> changes the place and size of the slice a little bit
>
> 4) When I press Done in Fireworks I see this picture in
figure four in
> Dreamweaver which shows integration between FW and DW
about table structure is
> broken. (In this point if I add any behaviur to the
slice DW doesn't recognize
> it, or any other change in FW can not be recognized by
DW)
>
> 5) In order to show this broken integration in table
sturucture, I am putting
> a new slice to png when Editing from DW in FW.
>
> 6) When I click on Done in DW I see this picture on the
figure six. Beacuse FW
> doesn't have any effect on html's table structure code.
>
>
> I can not upload images related my topic here but you
can see it in the same
> topic at
>
http://www.fireworksguruforum.com/index.php?showtopic=14282
>
>
>
I can reproduce your results, but I don't consider this a
bug; just a
limitation of Roundtrip editing.
You can't add or change slices without re-exporting the html
from
Fireworks. Roundtrip is for image editing, not for altering
the table
structure. If I edit, and re-export, my table remains intact.
If you want to edit the slices and resulting html, open the
PNG file
independently of Dreamweaver, change your slices and images
and then
choose File > Update HTML (this option is not available
when in
Roundtrip mode). FW will ask you to locate the html file.
When located,
you will have the options of
Replace Images and Their HTML - replaces the previous
Fireworks HTML.
Update Images Only - overwrites only the images.
As an aside, the rigid table created by FW is rarely
desirable for a
production web site.
HTH
Jim Babbage - .:Community MX:. & .:Adobe Community
Expert:.
http://www.communityMX.com/
CommunityMX - Free Resources:
http://www.communitymx.com/free.cfm
.:Adobe Community Expert for Fireworks:.
Adobe Community Expert
http://tinyurl.com/2a7dyp
.:Author:.
Lynda.com -
http://movielibrary.lynda.com/authors/author/?aid=188
Peachpit Press -
http://www.peachpit.com/authors/bio.aspx?a=d98ed798-5ef0-45a8-a70d-4b35fa14c9a4
Layers Magazine -
http://www.layersmagazine.com/author/jim-babbage

Weblogic Integration Interview Questions and Answers

Can some one send me WebLogic Integration interview questions and answers to [email protected] and [email protected]
Thank you.

hi all,
can any one help us how to get or retrieve DataSource Names in weblogic using java code.
it is very urgent. please copy the java code here.
Somu :)

Using Data Integrator Migration Mechanisms and Migration Tools

Data Integrator provides two mechanisms for migrating jobs from development to test to production : <ul><li>Export/import <ul><li>Export/import is the basic mechanism for migrating Data Integrator applications between phases. First, you export jobs from the local repository to either a file or a database, then you can import them into another local repository. </li></ul></li><li>Multi-user development <ul><li>Instead of exporting and importing applications, multi-user development provides a more secure check-in, check-out, and get mechanism, using a central repository to store the master copies of your application elements. </li></ul></li></ul>Regardless of which migration mechanism you choose, Business Objects recommends you prepare for migration using one or more tools that best fit your development environment :<ul><li>Naming conventions <ul><li>Just as Business Objects recommends you standardize Data Integrator object prefixes, suffixes, and path name identifiers to simplify your projects internally, we also recommend the use of naming conventions externally for migration purposes. </li></ul></li><li>Datastore and system profiles <ul><li>With multiple profiles, instead of a separate datastore (and datastore configuration) for each database instance, you can associate multiple datastore profiles with a single datastore connection. </li></ul></li></ul>Each mechanism and tool is recommended for specific types of projects. For more detail, please see the Data Integrator Advanced Development and Migration Guide provided with Data Integrator 6.5.

Hej Fahad!
Thanx for your valueable information but i have not any background of data migration and etc. I am mobile communication developer. So this is my first assignment between two companies. first company will give me the oracle data maybe in the shape of dump files and i will make my virtual server and there i will test that the data is valid or not and etc. If the data is valid then i will transfer it to target platform.
So now i have no access to the source system from where data is coming. Can you please explain me little bit more about invalid objects and still export/import works same.
Waiting for reply
Regards
Hani

Can any one send procedure for integration between XI and Geographic inform

can any one send procedure for integration between XI and Geographic information System(GIS).
Please clarify ASAP..
Thanks

Hi,
Please see the below links
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/d53af8ca-0801-0010-08b0-dce9e02130a8
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/d53af8ca-0801-0010-08b0-dce9e02130a8
GIS VS XI
Regards
Chilla..
Points rewarded if it is usefull..

XI Integration Builder API and Javadocs

Hi
I have been asked to produce a standalone app that will change the XSL files in a software component on XI.
This requires the component to be made writeable, edited, and then its change list be submitted.
I have tried to find an API that offers these functions, but the search was unsuccessful. I think that asking the question here may give me a definitive answer.
Does anyone know if there is such an API, and where it could be found?
Thanks
Bill Logan

Hi Kirk,
What you can (and proberbly should) do is setup a local adapter engine (local J2EE installation) inside your DMZ (where the proxy is located). The internet server can than access your local adapter engine directl (preferably via HTTPS). The connection between you integration server (XI) and the local adapter engine must be opened through all firewalls (again you might want to use HTTTPS).
You can maintain the local adapter engine through the integration server, but servers on the internet can only access the local adapter engine.
You also might want some extra security using username/password or client certificates on the local adapter engine in the DMZ.
In my opinion using an ITS or a reverse proxy is making things to complicated.
Hopes this helps,
Christiaan Schaake.

Integration of cProject and R/3

Similar Messages

Maybe you are looking for