Integration of ESS Portal and SAP

Hi,
Project Systems report RPSISKB000 - Capacity Requirements Overview (t-code CN50N) is a report works correctly when analyzing time that was entered via the R/3 GUI in transaction CAT2 u2013 Time Sheet: Maintain Times. However, when executing against time entered via Employee Self Service (ESS) Time Sheet Entry, the u201CActual Worku201D hours are not pulling through to the report.
I believe this is because when time is entered via ESS Time Sheet Entry the fields Capacity ID (KAPID) and Split Number (SPLIT) in table CATSDB are not populated. These two fields are populated when time is entered via the R/3 GUI in transaction CAT2.
I need how to populate these two fields when time is entered via ESS. How data flows from ESS Portal to SAP.
How SAP and ESS Portal integrated for data flow in between.
Thanks,
Suresh

You have to ensure that these fields in The CATS profile are set as input in CAC2 ie fields should be input and not is display
Please check it
Implement Note 1385803

Similar Messages

Difference between using the Enterprise Portal and SAP GUI

Hi Gurus,
Could one of you please send me a document that lists the differences between the Enterprise Portal and SAP GUI?
thanks in advance

Hi,
For groups, managedBy is an administrative convenience to designate “group admins”. Whatever principal listed in
managedBy gets permission to update a group’s membership (the actual security is updated on the group’s AD object to allow this).
In Win2008 and later managedBy also became the way you delegated local administration on an RODC, allowing branch admins to install patches, manage shares, etc. (http://technet.microsoft.com/en-us/library/cc755310(WS.10).aspx).
On the RODC, this is updating the RepairAdmin registry value within RODCRoles.
So the difference between them should be only the way they do the same thing.
For more details, please refer to the below article:
http://blogs.technet.com/b/askds/archive/2011/06/24/friday-mail-sack-wahoo-edition.aspx
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Integration for Business Workflow and SAP Interactive forms by Adobe

Hi
Is any of you able to watch the following SDN eLearning Session ?
<i>Integration for Business Workflow and SAP Interactive forms by Adobe (RIG session 7)</i>
I can play nearly all the other eBooks, but not this one. Any idea ???
Regards, bernhard

I solved the problem.
It is not possible to view the ebook with IE 7.0. So I removed the new Internet Explorer and everythink is working fine.
Greetings, Bernhard

Creating User in Portal and SAP Backend simultaneously?

Is it possible when you create a new user for the portal (in my case, active Directory is used as central user storage) for SSO, that this user will also be created simultaneously in different SAP Backends without creating it manually everytime? Or is it perhaps possible to connect Active directory to these SAP backends as central user storage, too? My Problem is that everytime I must create manually the users in portal and all belonging SAP backends but I think it's not very comfortable.
Regards,
Frank

Hi Frank,
There are ways to integrate complete User Management where either SAP or the local LDAP (i.e. MS ADS) drive as the central store for users. Ultimately, the CUA concept can be entirely driven by SAP including the MS ADS ID's for the network. It involves a proposal that is uploaded into the ADS which includes the SAP required schema. When populated (or if configured as such) they can be applied as user properties for the backend systems. There is a tool within R/3 called LDAPSYNCH that allows the replication (either direction) of user data.
This concept is referred to as Identity Management. Start at http://service.sap.com/security. Then go to "Security in Detail" ==> "Secure User Access" ==> "Identity Management". There you can find info/docs on the CUA concept within the SAP landscape as well as the integration into the corporate LDAP.
I have seen most customers use separate R/3 backend User Management from the ADS. I assume that this is due to the complexity of adopting a whole new global user management process with existing "cultured" processes. However the SAP systems can support the entire corporate user management driven from within the R/3 core (HR).
I hope that this helps,
Regards,
Judson

Integration General new ledger and SAP orgmanagement

Hello,
as desribed in
http://help.sap.com/saphelp_erp60_sp/helpdata/en/42/f8f25eba761a7de10000000a422035/content.htm
there is a possibility to integrate object from the new general ledger into SAP HR.
In my case it is not enough to integrate those obect in IT0001, far better would be an deep integration in sap orgmanagement (like the cost center in om IT1001)
Does anyone knows a way to integrate this areas?
Best regards
GeKa

Hi Udo Werner
Thanks for your answer, now is clear that is not any integration between New Ledger and Matereial ledger, even that, I would like to know, what do you mean when you said u201CThe only integration topics might be how to handle the postings of material ledger within the accounting interfaceu201D?, is any transaction related ?
Thanks in advance,
Best regards,
Sergio

Help with Apache Reverse Proxy configuration with SAP Portal and SAP Webgui

Dear Experts,
I have an issue configuring Apache to work with SAP Portal and ERP webgui. Accessing Portal through Reverse Proxy is working fine. But the problem arises when we try to open an iView ERP webgui transaction page from Portal with the Reverse Proxy. Have anyone implemented similar requirements and could advice on the configuration required on the Apache side? Thank you

hi,
pls check the below links for reference:
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/24396589-0a01-0010-3c8c-ab2e3acf6fe2
searchsap.techtarget.com/searchSAP/downloads/chapter-december.pdf
1)Learn to implement the reverse proxy filter and portal gateway in SAP Enterprise Portal 6.0 on Web Application Server 6.40.
https:/.../irj/sdn/nw-portalandcollaboration?rid=/webcontent/uuid/006efe7b-1b73-2910-c4ae-f45aa408da5b
.2 )Configuring the Portal for Your Reverse Proxy Filter Solution . ... This document describes the reverse proxy filter mechanism in SAP Enterprise ...
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/32ad9b90-0201-0010-3c8a-c900cd685f8f
3)have full reverse proxy functionality. Possibly. filter. requests. Internet ... Reverse proxy (optionally with authentication etc.) ...
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/c066c390-0201-0010-3cba-cd42dfbcc8be
Note:please reward points if solution found helpfull
Regards
Chandrakanth.k

Integration of Adobe Connect and SAP Enterprise Portal

Hi All,
Is it possible to integrate Adobe Connect with SAP Enterprise Portal?
If so , how it can be done? Provide me with some details , links and materials.
Regards,
Eben.

HI,
Yes, this is Possible. You can use AppIntegrator Iview and Pass the URL for your Adobe Connect.
Thanks and Regards
Puneet

Backend Connection between Portal and SAP R/3

Dear All,
I am new to Enterprise Portal. Enterprise Portal 6.0 was running at our company with backend SAP R/3 4.6C connected to it.
Recently we have migrated our Backend SAP: R/3 Servers to AIX/Oracle platform. The server landscape is running on two application servers and one central instance with load balancing.
What changes is required to be done from the Enterprise Portal side backend configuration to get the EP connected to SAP:R/3 again ?
Regards
Saikat

Hi Saikat,
If previously you were accessing the R/3 using Application server and now if you have to access using message server. Then create a new system object for the correct template system object and set the corresponding parameters and test. If needed change the iview properties to the corresponding system object.
Regards
Arun

Integration with Enterprise Portal and Cognos System

Hi Gurus,
I want to display the report from Cognos System, but i want to take up the Snapshot of the report in backend and while in displaying in Portal an image of the particular report should be displayed, what's the report running.
If anyone tell how to get the snapshot.If anycoding block , that more helpful to me.
Awaiting for the reply..
Best Regards
Ganesh

Hi Ram,
One of the ways to do it is described in the following blog:
https://www.sdn.sap.com/sdn/weblogs.sdn?blog=/pub/wlg/1334 [original link is broken] [original link is broken] [original link is broken] [original link is broken] [original link is broken] [original link is broken] [original link is broken] [original link is broken] [original link is broken]
Regards,
Sridhar

Integrating Oracle Apps, Peoplesoft and SAP

Hi,
Our company has various system like Oracle Apps, Peoplesoft, SAP and some custom systems which uses microsoft active directory. All the system has a common User ID but diffrent password as set by the user. For now every user have to remember 4 different passwords and username(in some cases).
We wish to integrate the Authentication process using BPEL. Some thing like a SSO so the user will login into a new application(Build using ADF) which will contain the links to all the above stated application. With this new application the user will have to remember only one user name and password and this user name and password will be sinked with all the other applications using BPEL.
Can you guys through some ideas as in how we can acchive this? Is it possible to integrate the Authentication process using BPEL?
Thanks in advance,
Deepak.

Why dont you synch ypur users in OPID and keep one username password there and then use external application or portal context to authenticate to all your other applications?

Netweaver Portal and SAP Easy access GUI

Hi
I have a basic question and need answers from you folks
We have done all the necessary configuration and enhancement in sap crm 5.0 GUI - We are now implementing Netweaver Portal 0.4S and the transaction pages we see in portal are very different from what we have configured in Easy access GUI.
We want the portal pages to mirror to whatwe have in easy access. How will it be done? Is it done from SPRO in CRM or a different process all together.
Please give some directions as to how we can go about it.
Regards
Tarang

Hi Tarang,
To my knowledge, the easiest way to implement your requirement is to use iView of the type SAP Transaction iView.
While creating the transaction iView you have configure the user mapping and give the transaction Tcode.
The resulted iView will be the exact copy of what you see in the SAP GUI.
Let me know if you want further clarification.
Regards,
Prashil

How to do integration between Oracle 11g and SAP Data services

HI All,
i want to load data from Oracle 11g data base to some other data bases. we have installed oracle 11g server in one machine and Data services server in one machine.we installed oracle 11g client in data services server machine . i created data store for oracle and when i was executing job i got the following error.
how to resolve this issue. do i need to do any configuration between two servers (Oracle 11g and data services), and do i need create ODBC for oracle in data services machine.
if any one know the solution please help me out ASAP.
Thanks,
Ramana

Hi,
we installed oracle client "win64_11gR2_client" version on DS Server.
but i need the steps after installing oracle client tool. meaning integration between those two servers(Oracle and DS Server).and what are the variable create on DS Server and paths for variable and how to create ODBC for Oracle on DS Server.
Thanks,
Ramana

Integration between HP PPM and SAP PS

Hi,
anyone has interfaced SAP with HP PPM?
Any best practices? Any lessons learned?
Any kind of hint will be really appreciated
Thanks
Ed.

Hi Shashank,
The question is there in the Thread title itself. I think you forgot to read the Thread Title
If i am not wrong our colleague is asking for some pointers on HP PPM & SAP PS integration..
Best Regards,
Gokul

Integration between Ariba and SAP R/3 4.7

Hi All,
Have anyone implementing the integration between Ariba Software and SAP R/3 4.7?
In my project has using Ariba TIBCO and SAP Adapter as the integration tool that connect to SAP R/3 4.7 Non-Unicode system (using MDM for Thai language).
I found that when I pull data from SAP through Ariba TIBCO and SAP Adater, the Thai character showed as unreadable character like a garbage character.
Please help me.
Thanks

Hi Bimal,
Please go through this document which contains end to end steps to integrate R/3 HR with CRM
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/84dd0c97-0901-0010-4ab2-9849fba57e31
Best Regards,
Pratik Patel
<b>Reward with Points!</b>

ESS portal looke like SAP

Hi All,
I'm currently in the midle up upgrade project from 4.7 to ECC6, and we have ESS portal and upgraded to EP7.After upgrade there is we unexpected changes of ESS feel or appearance foer creating travel request.
Before upgrade it commond HTML, but after upgrade it's looked like SAP screen which running under portal. when I did right-click, screen will show the SAP functionality (HELP, BACK, POSIIBLE ENTRIES ect). normally it's standard portal fucntinality(BACK, FORWARD, VIEW SOURCE, PROPERTIES, ect)
I want to set it back to normal HTML portal, can anybody help what shuold I do?
Hengky

check these links...
PZ02 Transaction Screens
ESS Disply only mode for PZ02/PZ03
ESS Service PZ02

Integration of ESS Portal and SAP

Similar Messages

Maybe you are looking for