Integration of KM and DMS.

hi,
I have one requirement to integrat KM and DMS.
Please let me know the ways and some documents also so i can propose some solutions.
helpful answers will rewarded.
thnaks in advance.
jayesh talreja

Hi,
Following link has everything for integration with DMS:-
http://help.sap.com/saphelp_erp2004/helpdata/en/e6/8eae22d46455479a09f7ba5f12730e/frameset.htm
Using KM..it provides umbrella like connector...to connect to DMS.. You can search more on SDN ...
Regards,
Jigar Oza

Similar Messages

Refx and dms

Dear Friends,
I am looking for integration between refx and dms. Kindly provide me some details related to that as how we can use DMS with REFX.
Regards
Abhishek

Dear Abishek,
SAP note 860779 provides further information to configure DMS with RE-FX.
Hope it helps you further.
Regards, Franz

CFolders and DMS Integration

Hi,
At present we have DMS. We are going in for cFolders now.
How do we integrate cFolders and DMS? What are the pre-requisites / configurations needed?
Where can I find the related documents?
Regards,
Rajesh

Hi,
please check the cFolders configuration guide (for release 4.0, the guide is also attached in note 973764), chapter u2018cFolders Back-End Integrationu2019 or the Online Help in the SAP Help Portal under http://help.sap.com/ > SAP ERP > SAP cProject Suite > Project and Portfolio Management XX > Design Collaboration with cFolders > cFolders Functions > cFolders Back-End Integration.
For example, you can use the back-end integration for cFolders to exchange DMS documents. In the DMS system (or so-called back-end system), use transaction CFE02 to export DMS documents to cFolders and CFI01 to import documents from cFolders into DMS.
Please read the above documentations to see the system and installation requirements.
Besides creating a RFC destination in transaction sm59, you need to maintain the backend system using transaction CFC01 in the DMS system. At least one cFolders system must be defined in the customizing before backend integration can be used.
In order to allow the user to create new documents in cFolders, he/she needs write and create authorization in the relevant folder.
Regards,
Silvia

DMS integration with PP and PS.

Hi SAP PLM experts,
I would like to know how mySAP PLM's DMS module is integrated with PS and PP module.
Any small scenario with T codes and configuration help is highly appriciated.
If you guyz have any documents/materials for this question, please mail the same to sudhu03 at gmail dot com.
Thanks in advance,
S.Achar.

It is only through the object linkwhich you provide.
In the business perpective, we attach the contract documents, design drawings and other doucuments to the project for ready referance.
You can create the DIR directly from PS transaction or you can create it in DMS and attach it to the Project.
We do have the red lining to identify teh changes reqd in the document.

Solution Manager and DMS

Hi,
Am pretty confused between use of Solution Manager and DMS.Can they be used interchageably? What are the differences

Hi Gopal,
Presume DMS is something you are already familiar with. Hence wont go into the details.
The SAP Solution Manager, on the other hand, is a platform which provides integrated support of the life-cycle of a business solution, from the Business Blueprint via configuration to production operation. The SAP Solution Manager provides central access to tools, methods and preconfigured contents, which you can use during the evaluation and implementation, as well as in operation processing of your systems.
The SAP Solution Manager also provides an authoring function, with which you can create your own project templates, which you reuse in an implementation. The SAP Solution Manager is thus also a tool for SAP partners and companies performing a global rollout.
Hope this sets in the required clarity.
Regards,
Pradeepkumar Haragoldavar

SRM and DMS linkage

Hi SAP Gurus,
Hi SAP Gurus,
1) How will we link DMS content server to the SRM server, like we do with SAP R/3 and content server.
the senario is the vendor has to see the documents stored in DMS along with other details in SRM
and reply suitably,
right now SRM is using a concept called C-folder to communicate with vendors,
2) is C-folders similar like WEB-DMS,
3) if for 1000s of vendor to access the documents of DMS these vendors should have SAP User ID and Password ?
Thanks in Advance,
Kumar K
Thanks in Advance,
Kumar K
Edited by: Kumar K on Jul 2, 2008 1:24 PM

Hi Kumar,
If the requirement is dat vendor wants to see documents stored in DMS along with other other details in SRM then you can go for object linking.
in DMS u can select or create a object for SRM which creates integration with SRM and then vice-versa u can see the documents in DMS or from SRM.
Yes..now SRM is using concept of c-Folders for communicating with vendors,since c-Folders has functionality of maintaining public and private collaboration scenarios so c-Folders is being used to communicate between Suppliers and Vendors.
c-Folders is not like webDMS, it is a separate application for which the link can be created from portal itself.
in c-Folders user ID and password can be created which need not have any licenses.
Thank You,
Manoj
Pl. reward if useful.

CRM 5.0 Integration with Twitter and facebook

HI Experts,
i am working with SAP CRM 5.0 version,
My existing client want to set up SAP CRM with twitter and Facebook specially customor services ,
Does SAP CRM 5.0 has tight integration with twitter and facebook ,
if yes will you please share iinformation in terms of
1)Effort Estimation :manpoer
2)Costing details
Thanking you in advance
Pravin shete

@sherrysarath: Could you share some documents to understand how standards works for this issue? And if there aren't standards requirements, could you share your custom solution.
@pravin wipro : Could you explain what are your requirements?

Is it a Bug? Integration between Dreamweaver and Fireworks is broken in somewhere?

I can not upload images related my topic here but you can see
it in the same topic at
http://www.fireworksguruforum.com/index.php?showtopic=14282
I use CS3 Suite. It is a big trouble for me in working on
real pages. Integration is broken in somewhere else and after that
point it becomes impossible to work on Fireworks through
Dreamweaver.
I've made test to show this trouble and I narrowed the
problem to the pictures as shown in the figures below,
1) In figure one I am creating a completely new Fireworks
file as arrow.png with two frames and one slice in it. After I am
saving it as .png I am exporting it as .html with images in /images
subfolder.
2) After saving and closing the file in Fireworks, in figure
two, I am opening the html in Dreamweaver and changing the page
properties by writing zeros to page margins and by changing the
default font.
-----I guess in this point something happens which breaks the
integration between FW and DW--------because;
3) In figure three I am opening the .png through Dreamweaver
(by "Edit") and changes the place and size of the slice a little
bit
4) When I press Done in Fireworks I see this picture in
figure four in Dreamweaver which shows integration between FW and
DW about table structure is broken. (In this point if I add any
behaviur to the slice DW doesn't recognize it, or any other change
in FW can not be recognized by DW)
5) In order to show this broken integration in table
sturucture, I am putting a new slice to png when Editing from DW in
FW.
6) When I click on Done in DW I see this picture on the
figure six. Beacuse FW doesn't have any effect on html's table
structure code.
I can not upload images related my topic here but you can see
it in the same topic at
http://www.fireworksguruforum.com/index.php?showtopic=14282

damlays wrote:
> I can not upload images related my topic here but you
can see it in the same
> topic at
>
http://www.fireworksguruforum.com/index.php?showtopic=14282
>
>
> I use CS3 Suite. It is a big trouble for me in working
on real pages.
> Integration is broken in somewhere else and after that
point it becomes
> impossible to work on Fireworks through Dreamweaver.
>
> I've made test to show this trouble and I narrowed the
problem to the pictures
> as shown in the figures below,
>
> 1) In figure one I am creating a completely new
Fireworks file as arrow.png
> with two frames and one slice in it. After I am saving
it as .png I am
> exporting it as .html with images in /images subfolder.
>
> 2) After saving and closing the file in Fireworks, in
figure two, I am opening
> the html in Dreamweaver and changing the page properties
by writing zeros to
> page margins and by changing the default font.
>
> -----I guess in this point something happens which
breaks the integration
> between FW and DW--------because;
>
> 3) In figure three I am opening the .png through
Dreamweaver (by "Edit") and
> changes the place and size of the slice a little bit
>
> 4) When I press Done in Fireworks I see this picture in
figure four in
> Dreamweaver which shows integration between FW and DW
about table structure is
> broken. (In this point if I add any behaviur to the
slice DW doesn't recognize
> it, or any other change in FW can not be recognized by
DW)
>
> 5) In order to show this broken integration in table
sturucture, I am putting
> a new slice to png when Editing from DW in FW.
>
> 6) When I click on Done in DW I see this picture on the
figure six. Beacuse FW
> doesn't have any effect on html's table structure code.
>
>
> I can not upload images related my topic here but you
can see it in the same
> topic at
>
http://www.fireworksguruforum.com/index.php?showtopic=14282
>
>
>
I can reproduce your results, but I don't consider this a
bug; just a
limitation of Roundtrip editing.
You can't add or change slices without re-exporting the html
from
Fireworks. Roundtrip is for image editing, not for altering
the table
structure. If I edit, and re-export, my table remains intact.
If you want to edit the slices and resulting html, open the
PNG file
independently of Dreamweaver, change your slices and images
and then
choose File > Update HTML (this option is not available
when in
Roundtrip mode). FW will ask you to locate the html file.
When located,
you will have the options of
Replace Images and Their HTML - replaces the previous
Fireworks HTML.
Update Images Only - overwrites only the images.
As an aside, the rigid table created by FW is rarely
desirable for a
production web site.
HTH
Jim Babbage - .:Community MX:. & .:Adobe Community
Expert:.
http://www.communityMX.com/
CommunityMX - Free Resources:
http://www.communitymx.com/free.cfm
.:Adobe Community Expert for Fireworks:.
Adobe Community Expert
http://tinyurl.com/2a7dyp
.:Author:.
Lynda.com -
http://movielibrary.lynda.com/authors/author/?aid=188
Peachpit Press -
http://www.peachpit.com/authors/bio.aspx?a=d98ed798-5ef0-45a8-a70d-4b35fa14c9a4
Layers Magazine -
http://www.layersmagazine.com/author/jim-babbage

Weblogic Integration Interview Questions and Answers

Can some one send me WebLogic Integration interview questions and answers to [email protected] and [email protected]
Thank you.

hi all,
can any one help us how to get or retrieve DataSource Names in weblogic using java code.
it is very urgent. please copy the java code here.
Somu :)

Using Data Integrator Migration Mechanisms and Migration Tools

Data Integrator provides two mechanisms for migrating jobs from development to test to production : <ul><li>Export/import <ul><li>Export/import is the basic mechanism for migrating Data Integrator applications between phases. First, you export jobs from the local repository to either a file or a database, then you can import them into another local repository. </li></ul></li><li>Multi-user development <ul><li>Instead of exporting and importing applications, multi-user development provides a more secure check-in, check-out, and get mechanism, using a central repository to store the master copies of your application elements. </li></ul></li></ul>Regardless of which migration mechanism you choose, Business Objects recommends you prepare for migration using one or more tools that best fit your development environment :<ul><li>Naming conventions <ul><li>Just as Business Objects recommends you standardize Data Integrator object prefixes, suffixes, and path name identifiers to simplify your projects internally, we also recommend the use of naming conventions externally for migration purposes. </li></ul></li><li>Datastore and system profiles <ul><li>With multiple profiles, instead of a separate datastore (and datastore configuration) for each database instance, you can associate multiple datastore profiles with a single datastore connection. </li></ul></li></ul>Each mechanism and tool is recommended for specific types of projects. For more detail, please see the Data Integrator Advanced Development and Migration Guide provided with Data Integrator 6.5.

Hej Fahad!
Thanx for your valueable information but i have not any background of data migration and etc. I am mobile communication developer. So this is my first assignment between two companies. first company will give me the oracle data maybe in the shape of dump files and i will make my virtual server and there i will test that the data is valid or not and etc. If the data is valid then i will transfer it to target platform.
So now i have no access to the source system from where data is coming. Can you please explain me little bit more about invalid objects and still export/import works same.
Waiting for reply
Regards
Hani

What is data archiving and DMS(Data Management System) in SAP

what is data archiving and DMS(Data Management System) in SAP
Welcome to SCN. Before posting questions please search for available information here and in the web. Please also read the Rules of Engagement before further posting.
Edited by: kishan P on Aug 31, 2010 1:06 PM

Hi,
Filtering at the IDoc Level
Identify the filter object (BD59)
Modify the distribution model
Segment Filtering
specify the segments to be filtered (BD56)
The Reduced IDoc Type
Analyze the data.
Reduce the IDoc type (BD53)
Thanks and regards.

Can any one send procedure for integration between XI and Geographic inform

can any one send procedure for integration between XI and Geographic information System(GIS).
Please clarify ASAP..
Thanks

Hi,
Please see the below links
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/d53af8ca-0801-0010-08b0-dce9e02130a8
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/d53af8ca-0801-0010-08b0-dce9e02130a8
GIS VS XI
Regards
Chilla..
Points rewarded if it is usefull..

XI Integration Builder API and Javadocs

Hi
I have been asked to produce a standalone app that will change the XSL files in a software component on XI.
This requires the component to be made writeable, edited, and then its change list be submitted.
I have tried to find an API that offers these functions, but the search was unsuccessful. I think that asking the question here may give me a definitive answer.
Does anyone know if there is such an API, and where it could be found?
Thanks
Bill Logan

Hi Kirk,
What you can (and proberbly should) do is setup a local adapter engine (local J2EE installation) inside your DMZ (where the proxy is located). The internet server can than access your local adapter engine directl (preferably via HTTPS). The connection between you integration server (XI) and the local adapter engine must be opened through all firewalls (again you might want to use HTTTPS).
You can maintain the local adapter engine through the integration server, but servers on the internet can only access the local adapter engine.
You also might want some extra security using username/password or client certificates on the local adapter engine in the DMZ.
In my opinion using an ITS or a reverse proxy is making things to complicated.
Hopes this helps,
Christiaan Schaake.

Download of prepackaged composites for the integration of OTM and EBS

Hi,
Can anybody help me out where I can download the latest version of prepackaged composites for the integration of EBS and OTM.
Thanks in advance.
Regards,
Sarala

Wahid,
Do you have any step by step guide,How to integrate this?
I want to check check the process how you have done that?
Thanks,

How does the integration between CRM and SD occur

How does the integration between CRM and SD occur? Is only via ALE and are there config steps in CRM to ensure the correct data mapping between CRM and SD?
So, if I create an order or quote in CRM how is it then created in SD? Or do they share the same data store.
thanks

Hi John,
Here is good documentation regarding Data Exchange for Sales Transactions: the CRM Enterprise and the ERP System are two different repositories, If you create the Sales Order in CRM then they will be replicated into SD (using CRM Middleware, BDoc's)
http://help.sap.com/saphelp_crm60/helpdata/en/52/2d0c38941e5666e10000009b38f8cf/frameset.htm
Also you can check the best practice guide for CRM 2007 there you have plenty of information
http://help.sap.com/bp_crmv12007/CRM_DE/HTML/index.htm
Hope this help,
Regards,
Ramon

Integration of KM and DMS.

Similar Messages

Maybe you are looking for