Integration of Lotus Notes in EP

Hi Portal gurus,
I am new to world of EP. We are using EP 7.0 and need to integrate Lotus mails with EP so that user can send the mail within EP itself.
Any pointers ?
Help will be highly appreciated !!!
Thnx,
JR

Hi JR,
Welcome to world of SDN.
Pl go thru the following blog
<b>LOTUS iNOTES INTEGRATION INTO EP>.
This shud help you to a gr8 extent.
Rgds,
Vivek
PS: Pl reward points if found useful

Similar Messages

  • SAP CRM Integration with lotus notes & blackberry (Mobile application) ?

    Dear Experts,
    Can any one pls explain me rough step in SAP CRM Integration with lotus notes & blackberry (Mobile application) ! I dont want detailed steps but pls explain me some important steps for this integration. Also pls tell me which standard SAP document i hve to refer for it !
    As i am totally new to such integraion. pls help me out of this !!!! Helpful answer will be rewarded with full points.
    Regards,
    Amol Tambe.

    Hi Amol Tambe,
    Please refer the following SDN threads to find more information about SAP CRM and Lotus notes integration:
    Re: Integration of SAP CRM 7.0 with Lotus
    Re: Need the connectivity between CRM and Lotus Notes.
    However, the above discussion is for CRM online and Lotus notes integration.
    Hope this helps!
    Regards,
    Chethan
    Edited by: Chethan Kumar C M on Sep 27, 2009 9:41 AM

  • CRM 2007 Integration with Lotus Notes 8.0 (Groupware Integration)

    Hi
    We are doing CRM 2007 Integration with Lotus Notes 8.0. So i need your help in this regard.I have the following documents with me.....
    a) SAP CRM Groupware Connector Relase 4.0 (Installation Guide)
    b) SAP CRM Groupware Connector Relase 4.0 (Administrative Guide)               c) MapBox 4.0 sp 11             &
    d) Groupware Integration installation Guide.
    We have started with Groupware connector Release 4.0 Installation guide
    We stucked at
    5.3 Installing Lotus Domino Groupware Connector
    Procedure
    1. Log on to your host using prepared Groupware Connector's administrative account.
    2. Launch setup.exe
    3. Click Next on the Welcome screen.
    4. Read the text on the Installation Prerequisites screen and check if your computer meets all the software
    and hardware requirements. If yes, press Next.
    5. Select the type of SAP Groupware Connector you want to install. Check if you want to install instance of
    Default Groupware Connector Proxy. Then press Next, wait while setup routine detects required
    software.*
    Now my questions are....
    1. Where will this setup.exe come from?
    2. Do we need to install the things in the same mannare listed above a,b,c,d?
    3. As we are implementing CRM 2007, i hope we dont need install Mapbox.
    Please help me in successfull Integration.
    Thanks in Advance,
    Ajay.

    Hi Peter & Stephen
    Thank your very much for quicke replies.
    Peter in one of the messages Martin Dauer  wrote the following recently on Oct 23 08. , so do you want me to confirm once again before proceeding further.
    Re: Link between sap crm 2007 with lotus 8  
    Posted: Oct 23, 2008 10:30 PM    in response to: Naveen Raju       E-mail this message      Reply 
    Hi Naveen,
    thanks for your detailed description. This is exactly the way how the Client GWI is getting set up. one little remark from my side on the steps.
    The user field are not required to be filled if you use Lotus Notes. this is only for the case of MS Outlook where you can start the synch from the OL Screen as well.
    The password field is not used with either groupware system. So you leave it blank and with the first replication run you are asked to type (and maybe save) your password. it is there as the application is shared with Mobiel sales as well and therfore we could not get rid of it.
    Supported platforms
    In general both the server and client GWI were tested with Lotus 8.0 and CRM 7.0.
    For server GWI Domino 8 is already supported for greater CRM 5.0, so should work with LD 8.0.
    The installation guide for GWI is available here ...
    http://help.sap.com/saphelp_crm60/helpdata/en/44/559f3699d908fae10000000a422035/frameset.htm
    I case of further issues pls contact me by mail or to this post.
    best regards.
    Martin
    Thanks & Regards
    Ajay

  • Workflow integration with Lotus Notes

    Greetings my friends,
    I got a new workflow project and I need to know the viability to make a integration between the Workflow and Lotus Notes.
    I already searched the forum for some tips, and only found one thread about it from 2006. There, say's about the a "Lotus-SAP connector" and some restrictions. I don´t know with this restrictions still aplys now a days. Or if we have other etter options.
    Sry, I still dont have any details about the workflow cause I am still discussing with the funtional about it. (infos about it's complexibilty).
    Att,
    José Oliveira.

    Hi Jose,
    I've done this recently in our project.
    You need NOT to have a Lotus - SAP connector for this if you are in version ECC6.
    Try to access tcode SWNCONFIG. This will not require you to have any middleware or some sort. This is just plainly a CONFIGURATION task in the said tcode.
    Just search a documentation on SWNCONFIG Extended Notifications.
    Regards,
    Reymar

  • Desktop Integration Suite, Lotus Notes and Linux

    Hello
    Can anybody answer my small question? Is there any possibility to use Lotus Notes client on Linux machines with UCM/ECM. Destkop Integration Suite components and client works with windows without any problems, but I can't find any information about Linux integration.
    Thanks in advance

    Desktop Integration Suite is a Windows-only client module. The client cannot be installed on a Linux desktop. From Windows, it should be able to connect and function with a UCM server installed on any supported OS including Linux.

  • Integration with Lotus Notes 8.5 - Room Reservation System to Add Approval Steps

    I have implemented several LiveCycle Forms with Some Workflow all
    based on XML and .NET. All working fine.
    Now, I have a new project (yet to be approved) which is to add
    Workflow and Approval Steps for Lotus Notes Room Reservation System.
    The current system on Lotus Notes, is out-of-the-box from Lotus, and
    it is working very well, and it has great repeat option to setup the
    required schedule to make the needed room reservation system.
    The user now requested to add some new features like add 2 more
    approval steps, and some new fields.
    I can modify the application in Lotus Notes, but this will creat a new
    problem. If there is new version coming for this system from Lotus
    Notes, then I will have to sync the modifications I did, and it will
    be a problem.
    I have put some screen shots to help understand what we are talking
    about:
    https://docs.google.com/leaf?id=0B97clwYte2SHYmUyZTRiZDEtZWRjZS00YmQ3LTg1MDUtM2MxNmYyYTIzM 2Ix&hl=en
    I have developed several programs in the past, I was able to connect
    to Lotus Notes Database from .NET.
    My plan is to develop the new Form in Adobe LC Desinger, with all the
    new required features, and connect to what ever existing functions/
    data to Lotus Notes (in both directions).
    The only thing I need help for is how to capture the Repeating
    Calendar Entry. I think this will take some effort. Becuase, once I
    capture all input parameters, I have to call a Web Service (in .NET)
    to get a list of Free Rooms to choose from.
    Here are my questions:
    1. Do you have any feedback on the above ?
    2. Any one has done any work to capture a repeating calendar entry in
    a PDF Form ?

    Hi Anil
    For Lotus notes integration with SAP solutions, pl check the following links:
    http://www.redbooks.ibm.com/redpieces/pdfs/redp4215.pdf
    http://www-306.ibm.com/software/info/ecatalog/en_US/products/Z262246B25186K14.html
    Best regards
    Ramki

  • SAP integration with Lotus Notes

    Hello Experts,
    As we can do MS-Outlook integration with SAP BOne,my client is using "Lotus Notes",so if I want to integrate it with SAP Business One How it will be possible.
    Plase let me know,
    Thanking You!
    Gauraw

    Hi Gauraw,
    Some information a colleague found on this:
    ==================
    How to connect Microsoft Outlook with Lotus Notes e-mail servers                                                                               
    As none of the applications are SAP B1, the best resource is from         
    Microsoft and IBM                                                                               
    How to connect Microsoft Outlook with Lotus Notes e-mail servers          
    http://support.microsoft.com/kb/290834                                                                               
    Use Outlook to access your Lotus Domino mailbox                           
    http://office.microsoft.com/en-us/outlook/HA010739021033.aspx                                                                               
    Deploying Microsoft Outlook Connector for Domino                          
    http://office.microsoft.com/en-us/orkXP/HA011364481033.aspx               
    ==================
    Also:
    The SBOMailer Service uses SMTP for sending emails - that means if the  
    Lotus Notes have an SMTP gateway/connector your client will be able to  
    use it for sending emails. Be aware that the gateway should not use SMTP
    authentification (please see the note 782611). In that case you should  
    use an additional program between Lotus Notes and SBOMailer Service.    
    ==================
    Any other intergration does not exist to the best of my knowledge.
    Hope some of this is useful.
    Jesper

  • Is RDC integration with Lotus notes apps possible using CR XI and lotus 8

    Hi,
    We have reporting feature implemented in one of lotus notes application using crystal reports 6 (OCX)  and as Crystal report is going to be upgraded to CR XI version in my organisation, we need to implement the same using RDC component.
    Background (on how it has been implemented using CR 6 ) :-
    i) Lotusscript generate few CSV file and pick a .RPT file from profile doc and places it under one folder on local machin (say x).
    ii) RPT file is designed to pick data from CSV file using system DSN (data source).
    iii) Data source (system DSN) has been configured with folder (x) that contains CSV and RPT file .
    iv) Crystal report control object has been embedded in the lotus notes form and lotusscript code gets handle of control object and opens the  report (RPT)file .
    We have set up all neccesary environment and trying to implement above functionality using RDC component but when we are embedding the crstal report report viewer in a lotus notes form , it throws an error "An error has occured while processing a request on an object".
    Please let me know if it possible using RDC or can anyone suggest me some other alternatives .
    TIA

    Hello,
    You should be able to use the RDC in Lotus Notes. There are significant differences between the object model for the old OCX (crystl32.ocx) compared to the Report Designer Component (RDC) and it's components, the craxdrt.dll, crviewer.dll, etc.
    I was able to find an older document that shows how to integrate CR9 into Lotus Notes: "[Using the Report Designer Component (RDC) in Lotus Notes|http://www.sdn.sap.com/irj/boc/index?rid=/library/uuid/50ce64b3-241f-2b10-b792-9685d3815a21]". You can use this as a starting point to compare with your code.
    The RDC object model hasn't changed much since CR9, but some of the runtime component references in the document may need to be correct (e.g. craxdrt.dll for v11.x vs craxdrt9.dll for v9.x).
    It is worth noting that the RDC has been retired with the release of CR2008. CR XIR2 (v11.5) is the last version of Crystal Reports that uses the RDC. The suggested migration path is to move to the Crystal Reports .NET SDK. This means you'll have no upgrade path with a v11.x application.
    Sincerely,
    Dan Kelleher

  • BPM Integration with Lotus Notes

    Hello Experts,
    Can you please let me know how do I go about integerating Lotus Notes in BPM?
    My requirement is send mails from BPM to Lotus notes to approve?
    I am using SAP PO BPM version 7.31.
    Thanks,
    Ami Bhuva

    Hi Tobias,
    We are having both the functionality, we also need to send notifications on Lotus Notes and also get approvals from the user on Lotus Notes.
    I want to know how do I integrate Lotus Notes on SAP BPM so that norifications and approval tasks can be sent on Lotus Notes.
    Also, is there any config on NWA needs to be done?
    Thanks,
    Ami

  • Integrating Lotus Notes with Guided Procedure Task

    Hi Experts,
    Is it possible to see Guided Procedure Tasks in Lotus Notes. Is this integration possible?
    We have UWL in portal to check the tasks.
    Instead of going to the portal to open Actions, can we get the task link in Lotus Notes Inbox?
    Thanks,
    Runal

    Thanks George
    Using GP APIs we can check tasks for processes through Lotus Notes, instead of going to the netweaver portal's UWL list.
    But GP APIs does not support WD ABAP.
    So integration of lotus notes with GP is only possible using WD JAVA.
    Thanks,
    Runal

  • Lotus notes integration for receiving workitems

    Hi All,
           i am getting some problem during getting the workitems in Lotus notes....
    what all should i need to check whether configuration side is ok.....
    and since which version of SAP is eligible to integration with lotus notes and outlook...?
    <removed by moderator - please refer to the [Rules of Engagement|https://wiki.sdn.sap.com/wiki/display/HOME/RulesofEngagement] regarding asking/offering points>
    Best Regards
    Dev
    Edited by: Mike Pokraka on Jul 17, 2008 1:13 PM

    yes they exist..........
    i have some doubts ........on this
    when ever i try to do auto forwording setting ..............
    its giving warning      "The forwarder and the recipient are identical"   and making internet address to  external address....
    and the variants are like in RSWUWFML2
    Job suffix              =        1            " What the siginficant for 2 ? 
    Tasks (blank = all)        =     TS00008267  "task number for decision step
    New Work items Only   X
    one msg per work item  X
    Workitem display          X
    Workitem execution      X
    Message Class for Subject       SWU_NOTIF
    Message Number for Subject        2
    Before Work Item Description    SWU_NOTIF_PROLOG1
    After Work Item Description     SWU_NOTIF_EPILOG2
    SAPLOGON_ID   =   SPACE
    Regards Dev

  • How to view *.eml files in Lotus Notes as native application?

    Using Desktop Integration for Lotus Notes, and using Contribution Folders via Notes:
    I can drop-and-drag an e-mail from lotus notes inbox to the contribution folder (in Notes) ok. I can view the *.eml file in Contribution Folder (Notes and Explorer), when I select "View" from the Contribution Folder it first attempted to open the file in outlook, I then changed the "view with" attribute,to Notes. Notes attempts to open the file and throws an error message: Invalid Directory Name or device not ready.
    Has anyone come across this before? If so, how did you ensure application consistency that e-mails declared as "documents" are accessed again via the native application (Lotus Notes not Outlook)?
    Many thanks,
    A.

    Not entirely. At least we came to the conclusion it doesn't make (much) sense to block the save option of PDFs if you want to allow printing them
    Anyway; there is of course another possibilty: you could always write your own java bean PDF reader; there are plenty of java PDF libraries available:
    Open Source PDF Libraries in Java
    The easiest way would be to choose one which can open a PDF from a URL and render it; I would retrieve the image via mod_plsql using WPG_DOCLOAD and simply use the PDF library to render the PDF. No tempfiles anyway, and if you don't implement it there is also no save button.
    cheers

  • How to integrate Lotus Notes and upload Help Docs into SAP Portal

    Hi Experts,
    I got 2 questions with regards to content in portal...
    1) I got nearly 30 to 40 help documents (PDF & WORD) which users may refer when accssing CRM & BW system in portal.
    Currently they are stored in the Local Drive....i am trying to find a way to upload them portal...so the users can always have the docs the require
    and
    2) Can any one please update me in detail ...on how to integrate Lotus Notes into portal and configure Single Sign on  currently my Portal and Lotus Notes user id's are different
    Thanks in advance

    Hi Geethika,
    1. IF documents are on your local computer, Netweaver Portal has a KMC Addon (Knowledge Management and Collaboration). Within KM it is possible to run a Document Management Scenario. You can Create Folders within KM, give Access Rights to Users, Create an Iview to browse KM Folder then add that Iview to a Page or Role so users can access it.
    For this, please chech the online documentation via http://help.sap.com/saphelp_nw04s/helpdata/en/20/b46d42ea0b3654e10000000a155106/content.htm
    2. For Lotus Notes Integration, your Lotus Notes Server must be running on Windows Platform.
    For the rest configuration please check the following:
    Single Sign-On from SAP Enterprise Portal to Lotus Domino
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/94c4e390-0201-0010-09a3-d09e11b80671
    I've the latest version of SAP Ticket Verifier, if you couldn't find it, I can send it to you.
    regards

  • ESS / Who is Who / E-mail / Lotus Notes

    Hi,
    In ESS, e-mail's can be sent. Any experience with the integration to Lotus Notes e-mail . So from ESS, the desktop e-mail or iNotes can be triggered, and user mapping done , so no Lotus Notes is asked ?
    Thank you .

    Hi!
    the Enterprise Portal send email functionality is based on SMTP that comes with NetWeaver J2EE Server. In addition, if you want to save the email to your SENT mail folder, you have to configure the Lotus transport (backend integration with Domino server).
    on UI level, you also may integrate iNotes or launch the notes client by creating "notes://" URLs.
    moreover, you may portalize your email using the soltions from Conet - please search the SDN content portfolio for Conet accordingly.
    If you need more information, please let me know.
    Regards
    Michael

  • JCA adapter for lotus notes

    Hi,
    I am working for the integration of Lotus notes (R5) with weblogic server 7.0 using JCA.Can anyone please help me to know about the JCA Resource adapters that are available for Lotus Notes integration with Weblogic 7.0.
    with regards,
    Vinod

    Vinod,
    Have you got anything on this already? Please share.

Maybe you are looking for

  • 70D software unable to download on Mac with or without CD's even changing OS's

    I purchased a 70D bundle including software, I've tried downloading the software on my 6 month old Mac but have failed to do so.  I even tried downloading it from Canon, and still does the same thing.  I've changed from Mavericks to Mountain Lion as

  • Output in Diagramatic Format

    Hi all.. Is there any standard program which displays the output in digramatic / flow chart format ? Regards, K.Tharani.

  • Databound XML not updating

    I have an XML variable that is populating controls.  The XML is populating the controls as it should, however when I make a change to the data in the control, shouldn't the XML be updating automatically?  Or, is there some extra setting up required s

  • Where can I download Photoshop CS6?

    Ich musste meinen Rechenr neu aufsetzten. Ich habe eine Lizenz für PS CS6 und möchte diese Version Downloaden. Wo finde ich diese Version?

  • Converting RAW to JPEG without exporting

    Hi all I mostly shoot in RAW to gain the extra flexibility this offers during post. Once I have finished editing the RAW images in LR3, I would like to convert them to JPEG to save disk space. Is there an easy way of doing this? I currently export th