Integration of New graph type in OBI application
HI,
We have a requirement where in client is interested to add a new type of graph into the OBI Application. No details of the graph type yet.
Can you please let me know the feasibility and the steps involved in integrating a new graph type in the OBI application.
Thanks,
Kiran
Dear Christian
Can you please let me know the meaning of SWF?
Anyway, I would use "Transaction Launcher" customizing to display a URL in crm ui framework.
Regards
Bhavishya
Similar Messages
-
Hi,
We need to add a new payment type in Oracle Applications 11i and I could not find the required setup steps. The Form Name is : APXPAWKB
The user's navigation is as follows:
Payables super user responsibility->Payments -> Entry ->Payments:Type:
There is a LOV with Manual, Quick and Refund and we need to add a fourth one as Elses.
How can we do this?
Thank You...Hi,
You cannot define a payment type as that is based on a lookup defined under the navigation Setup>lookup>Payables.
This look up access level is System whihc implies it does not allow user level values to be defined.
So you have to use the available payment types,
Thanks
Manish Jain. -
Integration Repository: change XSD type in data types
Hi,
we created data types for our interface where we used the XSD type float and integer. We built on that Message types and Message interfaces and used them as abstract types in a BPM scenario.
During our test phase we encountered errors with these XSD types and found out that it is better to switch the XSD type to string to get correct values.
However the changes in XSD types are obviously only visible in the Integration Repository. XI creates on Application Server side in the XML Object Type Builder an object which doesn't notice this change. And because of that we get still errors.
So does anyone know how to get this XML Object Type changed? We don't want to delete everything and create new message types?
Thanks in advance,
ChristinaHi Christina,
First go to SXI_CACHE -> Refresh the cache.
Also check for the Repository Cache Refresh/Notifciations..
You mean you have changed the xsd in the External Definition ...
If so , just go to Message Interfaces and just select the External definition once again and activate the same.
If you change the Data types then , if there is a change in field length/type then try to redo/reselect the datat types for the message types and activate once again.
For BPM just change something.. and activate once again..
Also check this blog- to activate Runtime version of the BPM
/people/krishna.moorthyp/blog/2005/11/28/inactive-integration-process-ip-at-run-time
Hope this helps,
Regards,
Moorthy
Message was edited by: Krishna Moorthy P -
Pricing: New condition type not getting listed in options in product master
Hi,
I have created a new pricing procedure and also created a new condition type for it. I am trying to create a condition record in the product master for this condition type but the condition is not there in the list of conditions. How can I inlcude it in the condition list?
Even the new condition type I have created by copying 0PR0 is not getting listed in the options, whereas 0PR0 is getting listed.
Regards,
Meenakshi
Edited by: Meenakshi Sawhney on Sep 9, 2010 8:27 AM
Edited by: Meenakshi Sawhney on Sep 9, 2010 8:29 AMHi Meenakshi,
you need to enhance the condition maintenance group in the customizing, which is assigned to the product master. Please check: IMG: Customer Relationship Management -> Master Data -> Products -> Special Settings for Sales Operations -> Assign Condition Group to Application CRM and IMG: Customer Relationship Management -> Master Data -> Conditions and Condition Technique -> Condition Technique: Basics -> Create Maintenance Group.
Best Regards,
Michael -
Hello,
Which are the impact on FI-CO module of the creation of a new order type to create a sales order?
Thanks a lot.
EmanuelaHi Emanuela,
When production is based on sales order ( i.e Product cost by Sales order) in this scenario
sales order is created as a cost object.
This sales order is referenced when we create Cost estimate structure in CK51N
In this way sales order is integrated with Product cost controlling in CO module.
If your question is not answered, then give specific details about your requirement.
With Regards
AKBAR -
Problem while print preview purchase order for new document type
Dear Experts,
I have got the problem as below and need your helps.
I created a new purchasing document type and then created a new PO with this document type. PO was created successfully in the system. I added a message to print out PO with the followed parameters as NEU output type, 1.Print Out medium , VN partner function, dispatch time is 3 ( Send with application own transaction).
Then, I clicked Print Preview button on the ME23n screen, the error message bellowed was shown
"The combination of document type
and Purchasing organization is invalid.
please check the document and change it.
unable to print the form"
I really want to print the PO with new purchasing document type on the existed purchasing organization, Could you please help me identify the problem and solution for this issue?
Appreciate for your responses.
Thanks,
Tinh Vo Trung
Edited by: Tinh Vo Trung on Sep 23, 2011 7:43 AMDear All,
Many thanks for your responses.
Regarding to maintain the condition record in MN04, I already done for that but the problem was not resolved.
Could you please come with the other posible causes and solutions for this issue?
Dear Bijay Kumar Barik,
Please let me know why we check the new document type in Program, Routine and From of NEU output type?
p/s: I compared the version the program, FORM and routine of NEU output type and found that there is no the differences btw DEV server and QAs server. However, An PO created susscessfully in QAs server, but the error was happend in DEV server.
Could you please come with the other posible causes and solutions for this issue?
Thanks,
Tinh Vo Trung -
Using scatter graph type in oracle 10g forms using bi beans
hi.. how i can use scatter graph type in oracle 10g using bi beans..
it seems scatter graph is supported in 10g but it doesnt work at all..
i used to use oracle graphics builder in oracle 6i forms,now i need to convert all my old graphs to 10g forms..the line,bar and pie it work very well but the scatter didnt work..
so please if anyone know how to use it please tell me.. and what versions of bi beans support the scatter graph type
thanks.
u can email me in
[email protected]Hi,
What version of Oracle Forms are you using? If it is 10.1.2.0.2 (10g R2 Phase 2) then the BI Beans version should be 10.1.2.1 (3.2.2.0.24.2).
When you run a Graph, do you see any version numbers?
Regardless of the version, scatter graph should work. What kind of errors are you getting?
When you install BI Beans in JDeveloper, you get access to BI Beans Help. Go to the following topic for setting up data for a scatter graph:
Help -> Building Applications with BI Beans -> Presenting Data in Graphs -> Specifying Data for Graphs
Did you try posting your question on the Oracle Forms forum?
BI Beans PM -
Need help for new message type for PO archiving
Hello All
I have configured new message type ZARR for PO archiving process. After configuring all the steps this condition is not getting picked to by itself. And after maintaing it manually it is giving red flag without any error message. Here I am listing all the step that I have followed for config. Please help me am I missing something or any parameter is wrong.
Steps for new Message Type for PO Archiving
1. Defined new Table 513 Purch.Org./Plant.
2. Defined new access sequence Z513 Access Sequence for Archiving.
Following are parameters to the Access Sequence
Access Sequence Number = 21
Table = 513
Description = Purch.Org./Plant
Requirement = 101
Exclusive = Yes (box checked)
3. Maintain Output Type ZARR for PO
General Data
Access Sequence = Z513
Access to condition (Checked)
Multiple Issuing (Checked)
Program = FM06AEND
FORM Routine = CHANGE_FLAG
Default Values
Dispatch Time = Send Immediately (when saving application)
Transmission Medium = Print Out
Storage System
Storage Mode = Archive Only
Document Type = ARCHIVE
Mail Title and texts
Language = EN
Title = Archiving for Legal Requirement
Processing Routines
Transmission Medium = 1 (Print Out)
Program = SAPFM06P
Form Routine = ENTRY_NEU
Form = ZJ_9H_MEDRUCK
Partner Roles
Medium = Print Out
Funct = VN
Name = Vendor
4. Fine-Tuned Control: Purchase Order
Oprat. = 1
CType = ZARR
Name = Testing for Archivin
Short Text = New
Update Print Related Data = Yes (checked)
Oprat. = 2
CType = ZARR
Name = Testing for Archivin
Short Text = Change
Update Print Related Data = Yes (checked)
5. Maintain Message Determination Schema: Purchase Order
Procedure RMBEF1
Step = 100
Cntr = 1
CTyp = ZARR
Description = Testing for Archivin
Requirement = 101
6. Assign Schema to Purchase Order
Procedure RMBEF1
7. Define Partner Roles for Purchase Order
Out. = ZARR
Med = 1 (Printout)
Funct = VN
Name = Testing for Archivin
Name = Vendor
8. Test Condition Maintained in MN04 (Master Data)
Purch. Org. = 0001
Plant = 24
Partner Funct = VN
Medium = 1 (Printout)
Date/Time = 4 Send immediately (when saving application)
Output Device = HUL1
Storage Mode = Archiving only
Thanks
Ankitthe problem is the Exclusive = Yes indicator in the access sequence.
Your other message has this exclusive indicator as well.
so if the first message is found, then no other message wil be determined
to allow several messages in one PO, you must not set this exlusive indicator -
To add new file type in SharePoint
Hi,
I am trying to add new file type for sharepoint site like MSWord, PDF etc.,
Are there any ways to create new file types in SharePoint? My requirement is to create a file type for AutoCAD drawings (.dwg format).
Please note, we are using SharePoint 2007 version!
ThanksBrowse to the Central Admin site
Select the Operations tab
Under the Security Configuration section, click the link for
Blocked file types
Select the Web Application that you would like to modify from the drop down list
Each blocked file extension displayed in the list is blocked by SharePoint. To enable the blocked file extension, simply remove it from the list.
Check with your type and if its there unblock it.
Regards, Dharnendra Shah "strong belief is the only way to success" -
Add New File type to Symbian os 9.1 ?
Hi all
I wanna Know is there any way to add new file type (for example AVI Filetype) in S60v3
- I know that Y-Task (Filetype) can modify File Association (But only for Known file types by Symbian os & cant add New file type)
Is there another app or trick?
Thanks in advanceI don't think there is any trick yet available. But there are 2-3 applications that play AVI media files.
-
Hi!
I want the XCode to apply C syntax coloring to the .nc files, which are not recognized by it. There are settings to change coloring schemes for known types, but i couldn't find anything to add a new file type. Each time I open a .nc file, I need to select the syntax coloring scheme manually..
Anybody has any idea on where to find settings for that?
best,
Onur.I ran into this same problem just yesterday and I was glad to even find out that I could temporarily fix the problem by relaunching the finder. It also happened to my while I was renaming files. It allowed it for a few files and then all of a sudden, nothing. I couldn't type, or do any key commands with anything related to the finder, although all of my application files were fine.
I am clueless as to how to permanently fix this problem, although i am thankful to read on how to relaunch the finder to fix it for a bit.
I'll keep checking back to see if some guru stops by with the answer.
Thanks for posting! -
Shortcuts don't stick. Hidden shortcut for Graph Type?
I realize there is a glitch that Adobe won't address. Custom shortcuts sometimes don't stick. The only tip I've received is to reselect my custom shortcuts each time I launch Illustrator (this is a pain).
I tried a different approach and assigned an alternative shortcut. But it still doesn't stick for one menu item: Object>Graph>Type.
When I was creating a new graph, I was in the data window and accidentally hit a key that opened the Graph Type dialog. I might have been imagining this, but does anyone know if there's an alternative key to open the Graph Type window?
I suspect Adobe is already preparing CS5 so I don't see a fix coming at all.
thanksI set it to Shift I and it worked after relaunch on a Mac.
As far as the command aboveI doubt that will work. -
Quality Mgt - can I create a new inspection type for source inspection
I want to create a new inspection type for surce inspection and I will assign it to Miscellaneous insp lot origin.
What is the application of vendor inspection lot origin ? Can be used for source inspection ?HI,
For source inspection.
If existing insp types are not going to solve your purpose , you can create insp type & assign it to insp lot origin 01.
But before that , check whether you can use the existing insp type 01 / 0130.
You need to assign that inspection type in the Q-info record , in the source insp field of insp control.
Also go through the help tips provide by SAP
Inspection Type for Insp. Lot Origin (Source Inspection)
Inspection type for the source inspection
Use
If you enter an inspection type for inspection lot origin 01 in this field, you can create an inspection lot for the source inspection within the lead time before the (scheduled) delivery date.
Dependencies
The inspection type must be active in the inspection setup (Quality Management view) of the material master.
If a status profile is stored in the quality info record for the supply relationship, a goods receipt inspection takes place instead of a source inspection.
Regards
K.M.Arun -
Hi Gurus,
We have Created new message type Zneu1 which has to send PO number to the user by email .
But when i try to create the purchase order with that document type it is not showing the new message type in message function.
so could you please explain what setting has do to and how the message function will work in sap?
when will be message function will be executed during creating or changing the PO?
thanks,
prasad.
Edited by: Csaba Szommer on Dec 22, 2011 7:06 AMHi,
I believe you created new message type but just cross check & double cross check is it Zneu1
OK.
Make default new message type in PO by just fine tune the output (message) type in following path:
SPRO-->MM>Purchasing->Message->Output control>Message types--> Define message type for Purchase Order--->Fine-Tuned Control: Purchase Order
Now here select the check box corresponding to new output (message) type to have default automatically displayed & save.
Monition condition record with new message type with PO document type in MN04 t.code and save. Also check u201CAccess conditionsu201D check box selected in PO out put type(message type) for application EF in NACE t.code and FORM or PDF/SmartForm Form linked to PO new out put type(new message type).
Regards,
Biju K -
New output type for billing documents
Hello All,
We have created a new output type (ZD05) for a billing document to send an automatic mail to "send to Party" along with the existing print output (ZD02).
ZD02 is triggered automatically on saving the billing document where as ZD05 has to be added manually to the output of the billing document.
Every time we add ZD05 manually, system automatically adds/trigger ZD02 automatically along with ZD05. We dont want this additional ZD05 output to be triggered on adding ZD02.
It will be of great help if anyone can let me klnow the configuration setting which we can do to stop this.
Points assured.
Warm Regards,
Jatinder BansalHi there,
Check what do you have in default settings. You should have "send immediately while saving the application" to trigger the O/p immediately. Transmission medium should be external send to trigger it as a mail O/p.
Also maintain the condition records. Only then O/p will trigger automatically.
Try checking the requirement that is assigned to the O/p in the determination procedure. See if there is any condition to triggger ZD05 & ZD02 together.
Regards,
Sivanand
Maybe you are looking for
-
Itunes 10.6.1 crashing after update
Itunes had been running fine after the 10.6 update. I applied the update to 10.6.1 (as every good apple customer should) and now Itunes crashes everytime about 30 seconds into starting the program. I tried starting in safe mode with the same results
-
Pdf 1.3 display incorrectly in Acrobat 9
I have a pdf 1.3 which was exported from CS4, When I render the file on our rip I get squares on a particular font which is embedded subset. The weird thing that the pdf displays the way it intended to be " the font displays correctly" in Acro 9. Whe
-
Need help with 3d mapping, part of design is showing up transparent
Here is the image I am working with http://25.media.tumblr.com/92fba886d84a9438c9520726b24a8fb3/tumblr_mm5oljeLJ31r848lxo1_128 0.png The words coca cola are in red in my design and whenever I add it to 3d mapping it red it no longer red but transpare
-
Hi Dudes, I am new to XML, when I am trying to read (parsing) the xml file from url, I am getting the following error.(using JAXP) xml2jsp.java:50: createTextNode(java.lang.String) in org.w3c.dom.Document cannot be applied to () Text index = request.
-
Tell me if I should I buy a new AP?
I just bought a new MBP a few months back just before the new model came out (whew). Being a windows desktop user I bought a D-Link wireless router to plug into phone DSL router modem. Note I have Vista x64 and BC and use it 40% of the time (Adobe li