Integration of Oracle Apps with the Third Party Label Printing Software(Bar

Hi,
I am integrating Oracle Apps R12 with the third party Label Printing Software(Bartender).
For generating the Label, I have to create the XML file in Oracle Apps and with the help of Oracle WMS i have to transfer the XML file to the TCP/IP Port.
Third Party Label Printing Software will pick the file from the TCP/IP Port.
I am not able to find the way to send the XML file generated by the concurrent program to the TCP/IP Port using Oracle WMS.
Below are the few links for Oracle WMS:
http://docs.oracle.com/cd/B25284_01/current/acrobat/115wmsug.pdf
http://docs.oracle.com/cd/E18727_01/doc.121/e13434/T210618T210847.htm#T210864
Thanks In Advance..

Pl do not post duplicates - Integration of Oracle Apps with the Third Party Label Printing Software

Similar Messages

Integration of Oracle Apps with the Third Party Label Printing Software

Hi,
I am integrating Oracle Apps R12 with the third party Label Printing Software(Bartender).
For generating the Label, I have to create the XML file in Oracle Apps and with the help of Oracle WMS i have to transfer the XML file to the TCP/IP Port.
Third Party Label Printing Software will pick the file from the TCP/IP Port.
I am not able to find the way to send the XML file generated by the concurrent program to the TCP/IP Port using Oracle WMS.
Below are the few links for Oracle WMS:
http://docs.oracle.com/cd/B25284_01/current/acrobat/115wmsug.pdf
http://docs.oracle.com/cd/E18727_01/doc.121/e13434/T210618T210847.htm#T210864
Thanks In Advance..

Hi,
I assume, i have already setup profile 'WMS: Label Print Mode' to Synchronous - TCP/IP.
Basically, you dont have to create any concurrent program for XML creation, Oracle will do it for you 'out of box'.
Also set 'WMS: Synchronous TCP/IP label request delay' to 100, this is a required step, though none of the documentation talks about it.
if you think that all the requests are not handled correctly, then you will need to increase this delay further.
Lastly, verify that the printer is setup correctly in Oracle (Place where you specify IP Address and port)
Thanks,
Hrishikesh

Integration of HR Masterdata with the third party Recruitment system

Hi folks,
I was doing some analysis regarding the process of integrating the HR Masterdata with the thrid party recuritment system. One of the process is exporting all the new hire data coming from the third party soffware( the entire hiring process will happen in this sytem) into the HR Masterdata.
From SPRO documentation I found there are two ways one is Inbound IDOC and the other is through interface. Since we do not have EDI service, we have to with interface, however it should not be an automated process. Because, the person getting hired has to have the intial procedure completed before hiring process occus and his data is entered into HR Masterdata. Hence the data coming from the interface file has to be processed manually
How to configure this process in HR? The version we are using is 4.6C How can this be done?
Any thoughts or ideas or leads would be really helpful.
Thanks in advance,
SK

Hello Sk,
i think the integration between SAP Recruitment and SAP Administration would be a bit more complicated as it is supplied from the SAP Recruitment tables which you probably would have to fill.
As promised I had a look to t752f. Run the following code to add lines into the table. After the values were inserted you can run PA48 without any other configuration. You will see an new line which you can select and than choose the Hire button. The system will guide you through the hiring screens and set the Name fields as default values.
REPORT zrwe_fill.
CALL FUNCTION 'HR_PREPARE_NEW_EE'
EXPORTING
lastname = 'Test_Lastname'
firstname = 'Test_Firstname'.
The function module us part of the standard HR component and offers many fields to preset in T752F. If you supply an existing EmployeeId the PA48 transaction will suggest you to do an organizational change when you choose the "hire" button. If you do not fill the value the system sets a dummy Id and suggests a hiring.
The function module is RFC enabled so if you can call an RFC from your external recruitment application you can fill the T752f table. If that works and you need additional fields just copy the module and add whatever you want.
Rgds.
Roman

INTEGRATION OF ORACLE APPS WITH MOBILE SMS

{color:#3366ff}Dear All,
I would like to Integrate the Oracle Apps with Mobile SMS,
The Task is that..
" WHENEVER THE PURCHASE ORDER IS RELEASED BY A SENIOR PURCHASE MANAGER, THEN A SMS MESSAGE HAS TO COME TO HIS SENIOR MANAGERS MOBILE Phone "
Is it Possible to Integrate Oracle Apps with Mobile Phone if it is possible then send me the DEMO Application procedure.....................
Please help me out..
Regards,
Vijay .
{color}

Sending an SMS is a relatively small customisation if you work with an SMS aggregator such as Clickatel or TXTLocal. Both expose simple Web Service api's that you call with the phone number and message text as parameters. The aggregator then hands the message off to the mobile phone network for delivery to a users phone. The aggregators also provide web services that allow you to be notified when they receive an SMS message for you. So if you wanted to be really smart you could allow the user to reply to the original SMS with "Approve" or "Reject" and update the status of the PO/requisition automatically and advance the workflow.
Edited by: mzjarvis on 19-Nov-2008 15:36

The third party PDF printer

Hello,
What mean the third party PDF? and how we can install this product?
Thanx,

With the installation of Adobe Acrobat you will get a printer named 'Adobe PDF'.

Can I use Oracle IPM with a third party content managemen system?

Hello,
Our client has a requirment to use Oracle IPM with a non-Oracle content management system. That is they don't want to Oracle UCM. Is it possible? If yes, can you please direct me to some kind of documentation.
Any help is greatly appreciated.
Regards
Abhishek

I think you should draw a scheme of your architecture for yourself.
An A/P solution consists of:
- scanning (hence, ODC/ODDC)
- repository of images (IPM based on UCM)
- workflows (BPM as a part of IPM license)
- connector to an application (usually, Oracle EBS Adapter is used here)
If you don't intend to use any part of the solution (e.g. you have a different ERP system than EBS, you have your own repository), you can replace it with your own parts. However, be aware that you will have take care of the integration - Oracle can integrate for you only those parts that Oracle has under control (ODC is integrated to UCM/IPM, IPM/UCM is integrated to EBS, workflows know how to call UCM/IPM services). Of course, it uses open standards (web services or RIDC), so you may implement the integration yourself.

Can I use a USB camera with the 3rd party USB camera software and share screens?

I want to do more than just use a USB camera w/iChat (or ichatusb). I also need to be able to initiate screen sharing between two computers. Specifically, I will use iChat with an insight built in camera on my end, and the other person will be using an iMac G5 PPC using a USB camera and the 3rd party USB software for USB ichat support.
My question then is am I able to request screen sharing (taking over their screen) from my ichat/fw combo to their ichatusb/usb combo?
thanks
dc

Hi,
The Cameras don't come into this at all. (But iChat and OS versions do)
Each end needs iChat 4 or higher.
Go to the Video menu and Enable Screen Sharing (Selecting toggles a tick On and Off (Tick Present is ON) )
Highlight Buddy in list and use the Screen Sharing icon at the bottom of the list (interlinked rectangles).
The G5 could be on Leopard (iChat 4) and be using a USB 1.1 camera that would need iUSBCam (formerly iChatUSBCam) as well as the Camera manufacturers Software.
iChat 3 (In Tiger OS 10.4.x) on the G5 with a USB 1.1 camera, Software and iUSBCam may well offer a Screen Sharing option (Or rather Desktop as Video Feed) in the iChat > Video Menu and that will not work
However if the G5 has USB 2.0 ports (not the Keyboard additional ports) then if it is up to OS 10.4.9 it can use a UVC Camera for Video Chats (UVC = USB Video Class No need for Additional Drivers) but Screen Sharing will still be an issue due to the iChat version.
IF the G5 is still on OS 10.4.x then you will have to use a third Party VNC app at both ends (And run a iChat Audio Chat along side)
9:33 PM Friday; September 2, 2011
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb( 10.6.8)
 Mac OS X (10.6.8),
"Limit the Logs to the Bits above Binary Images."  No, Seriously

Schdule line in the Third party SO

Hi there is an issue with the Third party SO which we are creating.
Please note: We are creating the THird party SO with respect to a quotation.
However while creating the SO with ref to Quot. the system is automatically increasing the schedule line date by 1 day.
ie. For ex. if the reqd delivery date in the quotation was x. In the SO the system is confirming a scedule line with X+1 date.
I looked at setting of shipping point (no pick/pack time), SO doc type, route.
There is no extra day mentioned for backward scheduling.
So if I mention the reqd del date as today (by default), the system does a backward scheduling. Since there is no material on the material avaliability date (ie. today)...why does it forward schedules it for tomorrow by default??
So I do not understand why the schedule line is advanced by 1 day.
In a third party scenario, It unncessarily takes me to the Availibility screen and asks me to confirm the next day date.
Supreeth

well in this case .. the system is taking the time the vendor needs to produce the stock....
this time is picked from PIR (purchase info record ) in this record u maintina in how many days vendor is going to deliver the goods.....may be this field is making your avial check ......check it out
if this solves reward points on the left column to this answer.
thanks.

SAP R/3 integration with (Manual) Third-party App

Hi All
I am working on a scenario in which Third Party application has functionality which actually refines & correct the data upto the accuracy of 99%. So for this end-user needs to enter bit of information on their front-end then application will return the data on the basis of that information.
Now the problem has different parts -->
*) If I choose that SAP R/3 will initiate the ( Synchronous ) process then ABAPers raised the concern that they will not be able to display the response data on correct SAP screen also how to actually access the front-end of Third party.
Third-Party is ready to replace the Front-end with the web-service but then end-user will not be having the functionlity to select different options which is the strong part of Third-party application & also client is not agree to that.
Do you think I should use BPM in above solution with correlation on some field to identify the SAP screen.
*) If I choose Third Party application to initiate the ( Asynchronous ) process then again ABAPers raised the concern that how to display it on the correct SAP screen & how they know that data is coming at this point of time & they need to display it. Also Third Party said in this case they don't have expertise to customize their Front-end application & which will lead to additional cost to hire other developers.
Now can you suggest some good solutions for this kind of scenario in which an application needs the Manual intervention & needs to be integrated with SAP R/3. Also suggest from which direction I should initiate the process.
Thanks
- Lalit Chaudhary -

Matias
<<<< with front-end do you refer to SAP R/3 ?
No Matias with Front-End I meant Third Party is providing the web-page where end-user can enter the details & those will be refined & corrected by the Third-Party Application.
<<<<< Which ways has the Third-Party app to connect with (file, database, jms, etc.).
Third-Party App is providing Java Classes & Web-Services for integration but we don't want to access them directly, first of all we would like to invoke/access the Front-end application.
<<<< What is the purpose of this third-party app ? just to receive data, validate it and return it once it is corrected ?
Actually in this Front-end user can enter the data on given fields & data will be keep on refining while he is entering the more information into that given field. For e.g if the field says "City" & user enters "DE", a drop-down will come with all the cities in the world starting with "DE" like Delhi, Denmark etc.Once all the fields are populated with correct data user will click on "Submit" button which will send the data to SAP R/3 ( which we wish to do ).
Now in this case when user will click on Submit button ( means Third-party will initiate the process ) & data will be send to XI using ( for e.g ) HTTP sender then ABAPer's raised concern that how they will be able to show it in the right screen without using proper thread ID.
Pls. let me know in case you require any further information. My problem is this how to relate the Third-Party data with correct screen of SAP.
Thanks
- lalit -

How are the third party apps for the iPhone?

Being a long time Palm user, then moved to BlackBerry I watched the quality of third party apps really plummet due to a more restrictive development agreement.
Now considering an iPhone, I'm curious about how healthy the 3rd party app community is for iPhone, something I miss from my Palm days. From what I've heard, the development for iPhone applications is even more restrictive than for BlackBerries.
Anyone that wouldn't mind addressing one or all of these questions for me from their own experience, would be greatly appreciated.
1) Do you use third party applications on your iPhone, or do you find the native Apple software to be sufficient?
2) Are there alot of different choices for utilities, or do you find yourself pigeonholed to 1-2 programs.
3) Would you say that the third party apps are "mature" that is stable, follow similar flow/integration with the phone and designed in an intuitive way?
Again thanks for anyone that chooses to help me with this. I was really disappointed with the apps available for the Blackberry. At $15-$25 dollars each, I was usually let down by the quality and selection and overall experience.

Snarg wrote:
1) Do you use third party applications on your iPhone, or do you find the native Apple software to be sufficient?
The native software is excellent and I also have apps to fill in for things not available as part of the out of the box iPhone.
2) Are there alot of different choices for utilities, or do you find yourself pigeonholed to 1-2 programs.
If you go to the app store and browse, you'll find lots of different utilities. In some cases, there are a dozen different options that do the same basic thing and in other cases there are a couple.
3) Would you say that the third party apps are "mature" that is stable, follow similar flow/integration with the phone and designed in an intuitive way?
Some apps are well done and others aren't. Since they are developed independently, there is variability. The apps I use most frequently seem pretty stable. It all depends on your needs.

What are the third party tools available for Encryption in Oracle database?

Dear All,
Can you please help me with the below question?
What are the third party tools available for Encryption in Oracle database? Please let me know if you know their feedback and also licensing/cost information

Why would you spend money to purchase a third-party tool that will be, almost by definition, less secure than the tools inside the product you already own and paid for?
http://www.morganslibrary.org/reference/pkgs/dbms_crypto.html
But were I to have any to recommend one I would not do so without knowing information you seem to consider unimportant such as:
1. Operating system
2. Database edition and version
3. What type of data needs to be secured
4. What level of security is required

IDoc-to-File with ext. Partner ... How to define the third-party system

Hi all,
I want to make an IDoc-to-File scenario with an external partner. the xml-file generated by the integration server should be forwarded with the file/ftp-Adapter to a ftp-server in New York (our XI-System is in Germany).
Is it right that I have to create a technical system and a business system for the ftp-server in New York? I want to create it as a third-party system. But how? Is it enough to give only a name for the third-party technical system?
What I have to put in "Host name" or can I leave this gap empty? And have I to choose Products or is it not nessesary?
Thanks for your answers
best regards
Christopher Kühn

>
> Is it right that I have to create a technical system
> and a business system for the ftp-server in New York?
Yes it is the correct way to do this.
> Is it enough to give only a name for the third-party
> technical system?
> What I have to put in "Host name" or can I leave this
> gap empty?
Dont remember exactly. But I think HostName is mandatory. You can give any value that you want here. Does not matter at all.
Ideal way is to give the HostName of the FTP server here. if unknown give any value.
And have I to choose Products or is it not
> nessesary?
>
Not necessary. But ideal would be to assign the products which you have created in the SLD for your XI content so that the SWCV is also associated with this Tech System
Regards
Bhavesh

Screen Resolution issue with most third party Apps

I have noticed that the screen resolution on my new iPhone 6 is not the same across the apps. For example when I open Facebook, the fonts seems to be like a little blurred and the background appears blurred. I am sure the third party apps need to work with the new iPhone to get it fixed. But just wanted to make sure that there is no need to do anything at this point. These apps are making the new iPhone screen resolution look sub-standard which is in no way Apple's fault. These Apps need to grow up faster and release updated versions before the users start cursing them for lagging behind lol..
On the other hand the Apps designed by Apple work perfectly fine!
The new iPhone 6 is beautiful! Thank you Apple! I love you.

I can't help with the problem, since I don't have a laptop or second monitor, but if you want to report this to Apple, send a bug report (or enhancement request) via its Bug Reporter system. Join the Apple Developer Connection (ADC)—it's free and available for all Mac users and gets you a look at some development software. Since you already have an Apple username/ID, use that. Once a member, go to Apple BugReporter and file your bug report/enhancement request. You'll get a get a Bug ID number; thus, starting a dialog directly with engineering.

[svn:fx-trunk] 11488: Resubmitting binary distribution of xercesPatch. jar from the third party module in the SDK and compiled it with Sun JDK 1.4 .2_12.

Revision: 11488
Author:   [email protected]
Date:     2009-11-05 17:10:10 -0800 (Thu, 05 Nov 2009)
Log Message:
Resubmitting binary distribution of xercesPatch.jar from the third party module in the SDK and compiled it with Sun JDK 1.4.2_12.
QE notes: N/A
Doc notes: N/A
Bugs:
SDK-16818 - Must open-source the code for xercesPatch.jar.
Reviewer: Discussed with Gordon
Tests run: Checkintests
Is noteworthy for integration: No
Ticket Links:
    http://bugs.adobe.com/jira/browse/SDK-16818
Modified Paths:
    flex/sdk/trunk/lib/xercesPatch.jar
    flex/sdk/trunk/modules/thirdparty/xerces-patch/build.xml

Did you try this:
http://forum.java.sun.com/thread.jsp?thread=434718&forum=60&message=1964421

HT6533 Where can I find the third party app? I'm really in trouble that I can't record and check my blood glucose. Of cause I exported the data from app, but It's not readable for me. Please reply ASAP and give me other solution.

Where can I find the third party app?
I'm really in trouble that I can't record and check my blood glucose.
Of cause I exported the data from app, but It's not readable for me.
Please reply ASAP and give me other solution.

You find third-party apps in the App Store. What app are you looking for? Due to problems, Apple removed the ability to record that information in Health. You can always go back to whatever you used before three weeks Health was released. Why can you not check and record your blood glucose? I would assume you check it using blood samples and a glucose meter which has nothing to do with your phone. You should be able to record it in any number of apps, from Notes to purpose made third-party apps.

Integration of Oracle Apps with the Third Party Label Printing Software(Bar

Similar Messages

Maybe you are looking for