Integration of SAP CRM 7.0 with MS Exchange 2007

Hi SAP GURUS,
We have Installed CRM 7.0 ABAP APP server.
We are in process of installing MS Exchange gropware connector and MS Exchange groupware connector proxy Release 4.0
Now my question is do we need to install both of them(GW connector & GW Conn Proxy) on the same server where our Microsoft Exchange 2007 is installed ? or we can install on two different servers like MS Exchange
on server XYZ and other two components on server ABC.!
Also i believe ABAP Mapbox is get installed automatically when we do the installation of CRM 7.0 ABAP Application server. am i correct ?
How to start that ?
Will you please guide us the same asap.

HI Arno,
I asked our CRM guys but because we are doing workforce management and that required server based integration..
Do you have any idea for that ?

Similar Messages

SAP CRM E-Mailing with MS Outlook 2007

Hi everyone,
I just came to know that some people have trouble with E-Mail and MS Outlook 2007. Things have changed a little in the MS Office World and so the One-to-One E-Mail integration will not continue to work without a little change to your MS Outlook 2007 Installation.
Please have a look at this post to make you aware of the changes needed.
/people/martin.dauer/blog/2009/09/21/sap-crm-and-microsoft-outlook-2007
Please post to the group here if you still have trouble
All the best
Martin

HI Arno,
I asked our CRM guys but because we are doing workforce management and that required server based integration..
Do you have any idea for that ?

Integration of SAP CRM 7.0 with Lotus Notes 8.5 ?

Hi,
Just wandering if anyone has integrated CRM 7 with Lotus Notes 8.5 successfully lately? I am runing into problem installing the Groupware Connector.
Aug 30, 2010 4:13:37 PM ...sap.gcn.Logger.trace(Logger.java:134) [Domino.R5.ConnectionSys-local-8] Error: java.lang.UnsatisfiedLinkError: no nlsxbe in java.library.path
     at java.lang.ClassLoader.loadLibrary(Unknown Source)
     at java.lang.Runtime.loadLibrary0(Unknown Source)
     at java.lang.System.loadLibrary(Unknown Source)
     at lotus.domino.NotesThread.load(Unknown Source)
     at lotus.domino.NotesThread.checkLoaded(Unknown Source)
     at lotus.domino.NotesThread.sinitThread(Unknown Source)
     at com.sap.gcn.dominor5.local.ConnectionSysHandlerLocal.init(ConnectionSysHandlerLocal.java:42)
     at com.sap.gcn.dominor5.ConnectionAbstract$ConnectionAbstractThread.init(ConnectionAbstract.java:130)
     at com.sap.gcn.dominor5.util.Adapter$AdapterThread.run(Adapter.java:136)
Aug 30, 2010 4:13:37 PM ...sap.gcn.Logger.trace(Logger.java:134) [main] Error: com.sap.gcn.ConnectorException: [ERR: 9]: Unspecified error: java.lang.IllegalThreadStateException: Thread is canceled
     at com.sap.gcn.dominor5.ConnectionAbstract.close(ConnectionAbstract.java:62)
     at com.sap.gcn.dominor5.GroupWare.releaseConnectionSys(GroupWare.java:563)
     at com.sap.gcn.dominor5.GroupWare.initialize(GroupWare.java:100)
     at com.sap.gcn.dominor5.ConnectionTest.testConnection(ConnectionTest.java:81)
Caused by: java.lang.IllegalThreadStateException: Thread is canceled
     at com.sap.gcn.dominor5.util.Adapter.checkBridgeThread(Adapter.java:95)
     at com.sap.gcn.dominor5.util.Adapter.invoke(Adapter.java:47)
     at com.sap.gcn.dominor5.ConnectionAbstract.close(ConnectionAbstract.java:57)
Regards,
Kevin

Can you please try to do the following in the steps .
1) Search for the file nslbe.dll which can be in the folder c:\program files\notes . Add the location to the PATH variable in the environment variables.
2) Go to the installation folder for Lotus notes which might be c:\program files\Lotus\Notes\jvm\lib\ext . In this folder please put the following files Notes.jar,mail.jar,activation.jar, nslbe.dll. Please do take care that you will need to add the files in the folder ..\jvm\lib\ext
3) Add the ..\jvm\lib\ext folder location to your environment variables.
4) Create a environment variable JAVA_HOME and add the location of the jre-bin,lib and the JDK-bin,lib to this.
Restart your Server and the system where in you want to install the connector and try to run the installation again .

Crystal Reports access to SAP/CRM 6.0 with Integration with SAP Solutions

Hello,
we are running Crystal Reports 2008 with SAP CRM 6.0.
To boost productivity or Report writeing we need especially access to:
- Function Modules
- the CRM Business Objects Repository (Transaction SW01).
What kind of SAP/CRM ( or SAP / ERP ) Objects can be accessed with the Integration for
SAP Solutions ?
The BO Documentation [BusinessObjects XI Integration for SAP Solutions User's Guide|http://help.sap.com/businessobject/product_guides/boexir31SP2/en/xi31_sp2_bip_sap_user_en.pdf] does not give a clue if this is possible.
However, Ingo Hilgefort stated in his book that it is at least possible to access ABAP Functions, SAP Querries and SAP InfoSets.
What is the minimum product portfolio and the necessary Version - Can I install the following products stand alone ?
Crystal Reports 2008
Integration for SAP Solutions
Tomcat / Jaco
or
Must I need at minimum BO Edge and must install the CMS Server ?
Thank You
Martin

HI,
What kind of SAP/CRM ( or SAP / ERP ) Objects can be accessed with the Integration for
SAP Solutions ?
here is also a blog about this:
/people/ingo.hilgefort/blog/2008/03/23/businessobjects-and-sap-part-4
However, Ingo Hilgefort stated in his book that it is at least possible to access ABAP Functions, SAP Querries and SAP InfoSets.
>> correct. It is also in the Installation Guide / User Guide for the SAP Integration kit. You can use ABAP Functions, ABAP / SAP Queries, InfoSets, Tables
What is the minimum product portfolio and the necessary Version - Can I install the following products stand alone ?
Crystal Reports 2008
BusinessObjects Integration for SAP Solutions
BusinessObjects Edge or BusinessObjects Enterprise
Ingo

Integration of SAP Cloud for Customer with third party / legacy / non-sap system using SAP Netweaver PI

Hello,
has anyone experience with the Integration of a 3rd Party System with SAP C4C using SAP Netweaver Process Integration?
Is this a process of days, weeks or months?
Any documentation on this?
I am thankful for every Input!
BR, Roman

Roman,
Please read through the integration guides available on the SAP service marketplace as they address this specific topic in great detail.
http://service.sap.com/cloud4customer
The time duration of the project depends on the business process complexity being resolved and the level of integration desired between the different enterprise solutions in the landscape.
Thank you.

Needed SAP CRM Data model with Object, Entity and Attribute level details

Hello all,
We are working on a huge IS-U / CRM implementation and we are still in the data gathering phase. The client has a whole load of legacy systems that will be replaced with IS-U and CRM. Right now we are in the process of developing data models using Excel first and then presenting them to the client to go forward from there. For this we need to have all the business objects, entities and their attributes.
I know about the SD11 transaction, but we don't have a CRM system yet. My colleagues have access to a German ERP system and they were able to get models for HR, FI and Asset management. I tried for the Business partner / customer in there, but the models were not proper.
So, once again, I need the specific data models out of SD 11 for CRM business partner. If anybody has the information, please do pass it on to me as I need them urgently. It would be a great help if somebody can do so.
Regards
Rajesh

I suggest the following:
Please, check whether the system works if you activate the implementation BUPA_F4_AUGRP.
In addition check the notes 559662, 674869 and 782927. Maybe the notes are already implemented but you can try then the implementation of the BADI (SE19). It should resolve your issue.
I have implemented this Badi solution before, and after activation; the search help ; nor search result list did NOT show any Business partners anymore that had an authorization group I was not allowed to see.
kind regards
Davy Pelssers
SAP CRM/Security consultant

Cross-enterprise integration of SAP GRC Access Control with PeopleSoft

Friends,
Does anybody has/have/had the owner to implement Cross-enterprise integration of SAP GRC Access Controls 5.2 with PeopleSoft ?
If yes, what are the key points and approach one should keep in mind while going for this kind of cross-enterprise implementation.
Is there any reference material, blog, wiki or such informative resource regarding cross enterprise GRC implementation available on the web?
I tried to search, but could not get good results.
Any help would be highly appreciated.
Best Regards,
Amol Bharti

Amol-
From my experience:
CC 5.2 with Peoplesoft: as long as you have the RTA's installed in the Peoplesoft system and create the connectors in CC, you are good to go.
AE 5.2 with Peoplesoft: cannot provision to Peoplesoft, however you can connect with Peoplesoft HR for Password Self-Service. You have the capability to provision to SAP HR.
FF 5.2 with Peoplesoft: N/A
RE 5.2 with Peoplesoft: N/A
I am not sure if there are any standalone docs out there for AC integration with Peoplesoft. And the 5.2 manuals have sparse information on integration. However, the AC 5.3 manuals have more detailed info on the integration piece with various other non-SAP systems.
Sorry, I couldn't share more info, as that is all I know for now...
Ankur
GRC Consultant

Portal Integration with Microsoft Exchange 2007

Hi all,
I would like to integrate MS Exchange 2007 with portal so that I can enable all the groupware services including calendar, emails, appointments, availability etc.
Our Exchange landscape is integrated with our ADS, but portal uses its own user data store with a different set of User Ids.
I need to implement SSO between both these systems, where the user id is different.
I found few articles in SDN explaining how to configure SSO, but i couldn't quite find anything on how i can accomplish my objective here.
Can any of you help me out?
Thanks a lot
Shobin

Eduardo,
Download the MS Exchange portlets here, and look at the documentation here.
regards,
Stewart

Exchange 2013 MB/CAS integration with legacy Exchange 2007 CAS/MB/Trans server

Hi All,
I have an existing running Exchange 2007 SP3 RU13 server acting as MB,CAS,Transport using a Barracuda SPAM for SMTP (MX Record is assigned to here), and a TMG2010 server performing all ActiveSync, Outlook Anywhere, and OWA connectivity.
I have built a new Exchange 2013 SP1 server that will (for the meantime) act as a MB & CAS server only.
I successfully migrated a testuser mailbox to the new EX2013 server from the EX2007 server. The problem is that once migrated, OWA and Outlook can't access the mailbox.
OWA form our URL gives the message: Outlook Web Access is currently unavailable. If the problem continues, contact technical support for your organization and tell them the following: No Client Access servers of the appropriate version can be accessed from
the Internet
If I run OWA from the EX2013 URL it works ok, but not for MBs on the EX2007 server.
I tested this configuration in a VM lab and it worked ok. All I had to do was move the mailbox, then run Outlook. Outlook automatically found the new server and opened the MB.
Basically what I need to do is move all our existing MBs from the old 2007 server to the new 2013 server. I want to continue to use the exisiting transport/CAS/EDGE services on 2007 without having to rebuild both the internal and external comunications
infrastructure at the present time.
How can I get the EX2013 server to act as the MB server for the EX2007 communications infrastructure?

Hi,
Please try to create a new user on Exchange 2013, and send/receive email via both Outlook and OWA to test whether the Exchange 2013 mail flow well.
If Exchange 2013 works well, please try to bypass the TMG on Exchange 2007 for a little while for testing.
Additionally, we can use CAS 2013 URL to proxy/redirect previous CAS, or publish both CAS 2007 and CAS 2013 to be internet facing server with separate URLs, as Ed suggested.
Thanks
Mavis Huang
TechNet Community Support

Outlook 2011 for Mac with Microsoft Exchange 2007/2010

Hi,
For already a fews days I am troubleshooting a Mac Outlook 2011 <> Exchange sync issue. I've got exact the same symptoms in two totally different environments.
- Environment one:
Exchange 2007 SP3 RU 14 (8.3.379.2)
Outlook 2011 14.4.7
- Environment two:
Exchange 2010 SP1 RU 8 (14.1.438.0)
Outlook 2011 14.4.7
Problem:
Autodiscover and EWS synchronisation test from Microsoft Exchange Connectivity Analyzer is succesfull. Configuring an new (Exchange) e-mail account with Outlook2007/2010/2013 fully based on autodiscover works with no errors.
Configure Outlook 2011 based on autodiscover when connected to the internal LAN works. Configure Outlook 2011 based on autodiscover or by hand doesn't work from WAN.
I am unable to synchronize Outlook 2011 with Exchange when WAN connected (No error in logging). I am able to synchronize OS X Mail (Default OSX Mail client) with the same Exchange server.
Conclusion: the autodiscover function that Outlook 2011 uses does not work from WAN, the autodiscover function that Outlook 2007/2010/2013 and Exchange Connectivity Analyzer is using does work from WAN. Do I need to configure something special for synchronization
with Outlook 2011 other than explained above when working from WAN?
When testing EWS with 3th party tooling(EWS Editor) and Exchange Connectivity Analyzer everything is working as it should be. (all mailbox data is shown). If you need any more information about the context I am happy to provide.
Regards,
Mikkie van Falier

Hey hpujary.
Welcome to the BlackBerry Support Community Forums.
At this time, only contacts can be synchronized with BlackBerry Link software and a BlackBerry 10 Smartphones. The functionality to provide more options for PIM synchronization may be added in the future. I cannot say for certain that the issue outlined in KB27248 is resolved for BlackBerry 10 Smartphones as the functionality does not exist to confirm.
Cheers.
-Sawks
Come follow your BlackBerry Technical Team on Twitter !@BlackBerryHelp
Be sure to click Like! for those who have helped you.
Click Accept as Solution for posts that have solved your issue(s)

Unity 5 with MS Exchange 2007 and Windows Server 2003 Ent w/ SP2

Hello,
We have Unity 5 with Exchange 2007 SP1 on Windows 2003 SP1 Enterprise server. We want to upgrade Exchange to SP2 or SP3 but I could not find enough information, may not have looked in right places.
Does anyone have Unity with Exchange 2007 with SP2 or SP3? has anyone experienced issues with such upgrade?
Thanks,
Paresh.

Paresh,
Here's what you need:
Recommended Service Packs—Message Store
Revised October 25, 2010
•Exchange 2010 Service Pack 1
•Exchange 2007 Service Pack 3
For support information, refer to the "Support Policy for Microsoft Service Packs and Updates" section of Supported Hardware and Software, and Support Policies for Cisco Unity Release 5.x at http://www.cisco.com/en/US/products/sw/voicesw/ps2237/prod_installation_guides_list.html.
I pulled this straight from a Cisco document so you could be sure that you are moving to the latest recommended SP for Exchange which is SP3. I have clients running this SP without issue.
Hailey
Please rate helpful posts!

IPad unread email count doesn't tally with Microsoft Exchange 2007 email count from OWA.

I discovered that when we first setup the iPad to sync email from Microsoft Exchange 2007 server via ActiveSync, the total number of unread email count tally with the count from OWA. After a few days, the unread email count will be out of sync. The settings for iPad "Mail days to syn": No limit. Mail to show: 1000. iPad iOS: 5.1.1
We performed the following:
1.     Compare email by email to verify which are the read email from OWA doesn't sync to iPad. We discovered that some emails read from OWA doesn't sync with iPad even performed forced update. However, if we delete that read email from OWA, it will delete (unread) from iPad immediately after sync.
2.     Email recall message for successful recalled displayed in OWA but not on iPad.
3.     Calendar invite message forward as email displayed in OWA but not in iPad.
Is there a bug for Microsoft Exchange 2007 or there is limitation for iPad?
Any kind expert can advice?
Thanks.

Can you do setup an unread mail folder that shows all unread mail regardless of what folder it really is in on the iPhone mail program somehow?
No.
If not, can this be submitted as an enhancement as it makes email use very cumbersome.
Yes. You can submit feedback to Apple: http://www.apple.com/feedback/iphone.html.

Getting UConn 8.5 to work with both Exchange 2007 and 2010

According to the document below, I should be able to set up one Unified Messaging service to access mailboxes on both Exchange 2010 and Exchange 2007 servers. I setup my service to point to 2010 CAS servers and I can access 2010 mailboxes, but testing 2007 mailboxes comes up with an http 200 error. If I setup the CAS server as 2007, I can access 2007 mailboxes, but get an error on 2010 mailboxes. This will be a real pain if I can't do this with one service. I don't want to have to keep Unity Connection updated as users get moved from 2007 to 2010! Anyoe know how to do this?
http://www.cisco.com/en/US/docs/voice_ip_comm/connection/8x/unified_messaging/guide/85xcucumg020.html#wp1198171

I got this to work! My Unified Messaging Service was originally setup to Specify an Exchange Server. That is where I had put the DNS name of the CAS server (and that DNS entry pointed to several CAS servers). I changed the Service to Search for Exchange Servers instead and used that same DNS name in the Active Directory DNS Domain Name. When I do the test of this service, it tells me it Failed to locate a Domain Controller via DNS, but that is just informational. It also says it successfully connected to the Exchange CAS server with the autodiscover.xml. Now my mailboxes on both Exchange 2007 and 2010 are able to receive voicemail messages with this one Service configured.

Treo 680 does not sync with Microsoft Exchange 2007

Hi
My company just upgraded to Microsoft Exchange 2007 and my teo 680 stopped syncing my mails. I checked with the plam support and they informed me that 'The Treo 680 unlocked device is not supported with the Exchange Server 2007.'
Has anyone faced this problem. Can anyone help?
Thanks in advance.
Post relates to:
This question was solved.
View Solution.

bonzi wrote:
i have tried this out. while this may work on Sprint, it does not work on Unlocked devices. Finally with no solution from Palm on this particular issue i had to switch to a windows based mobile. I am a Palm fan, but looks like Palm does not care about this.
Nothing to do with Sprint: using domain\username in place of the username in VersaMail has been confirmed on the Centro on the AT&T network. I think the Centro runs a newer version of VersaMail than the 680 (the 680 was released in the Fall of 2006). Perhaps that is the difference?
The last software update was in January 2008, to support direct push email (http://kb.palm.com/wps/portal/kb/na/treo/680/unlocked/solutions/article/10807_en.html). I doubt you will see more, considering that this device has been discontinued.
I'm running Windows Mobile now. I miss the PalmOS calendar, but I don't miss VersaMail.

Word 2007 (docx) integration in SAP CRM 7.0 EhP1

Hi,
When creating word templates with the template designer (CRM_OI_TEMPLDSG) for office integration, is it possible to use Mircosoft Word 2007 docx-files?
Furthermore you get the message, that "The file contains custom XML elements which are no longer supported by Word. If you save this file, these custom XML elements will be removed permanently." ([KB2445062|http://support.microsoft.com/kb/2445062]) when you create a template in fileformat .doc with Word 2007. When you open this template again all xml elements are no longer available (as mentioned in the message) and you have to create the template again.
How do you handle this situation? Or do you not even have this problem?
Thanks in advance,
Sebastian

May be this thread Document Template designer - ActiveX on IE 7 problem and the [Note 1566793 'Procedure to create word template in EHP1 & higher versions'|https://service.sap.com/sap/support/notes/1566793] will give you some inputs.

Integration of SAP CRM 7.0 with MS Exchange 2007

Similar Messages

Maybe you are looking for